Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery
Related
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
error in /tmp/sideload/package.zip status 0
Help some 1 walk me through this mess. Matts download is taking 10 hours to download. Is there an external link I can use>?
n30r3b3l said:
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
Click to expand...
Click to collapse
you have two options...one is redownload the zip file from a different site or open up the one you have and manually delete that zip file from there and it should bypass and continue on... what it ma do to the rom is on you ... if you extract the package.zip and then open it youll see what files the zip contains...if it contains no files it is likely corrupt and need to download a new rom...what site did you download the ROM from and are you a cdma or gsm model phone?
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
ishsed said:
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
Click to expand...
Click to collapse
I've noticed all the people who get that error are using twrp. So I recommend using 4ext.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Hello,
I have the Problem that i can't install any custom rom on my GTab 10.1 P7500.
I'm on stock rom 4.0.4 right now and i tried everything. I want to flash the CM10-nightlies. I tried it with TWRP and CWM.
The error first was "assert failed getprop". I have deleted the first line in updater-script and the error was gone but after that I got the "symlink: some symlinks failed error (status 7) error"
I know that there are some other threads about this issue but with no solution.
Does anyone know what to do here?
Thanks
vanesco said:
Hello,
The error first was "assert failed getprop". I have deleted the first line in updater-script and the error was gone but after that I got the "symlink: some symlinks failed error (status 7) error"
Click to expand...
Click to collapse
There are two reasons you'll get the "assert failed". Either the ROM you're trying to install is not meant for your tab (it's for a tab 2 or something else) or you're running an old version of Clockwork Mod recovery. At some point, the GT-P7510 getprop string changed to "p4wifi" but older CWM wasn't giving that as the device name.
First, I'd make VERY sure that the ROM you're trying to install is compatible with your device. Editing the script as you did can brick your device. If you're sure it's OK, update CWM.
k1mu said:
There are two reasons you'll get the "assert failed". Either the ROM you're trying to install is not meant for your tab (it's for a tab 2 or something else) or you're running an old version of Clockwork Mod recovery. At some point, the GT-P7510 getprop string changed to "p4wifi" but older CWM wasn't giving that as the device name.
First, I'd make VERY sure that the ROM you're trying to install is compatible with your device. Editing the script as you did can brick your device. If you're sure it's OK, update CWM.
Click to expand...
Click to collapse
Hello,
thanks for the reply.
The ROM I want to install is "cm-10-20121119-NIGHTLY-p4" and it is the right one because the p4 version is for the p7500 GTab 3G.
I have cwm v5.8.3.1. I've downloaded it again and stil getting getprop errors...:crying:
Every custom ROM I try to install I get the same error message...
Does anyone has same issues?
I had a problem, with geting to CWM. It would get me to stock recovery with message:
E:error in /cache/update.tip
Status(0)
Instalation aborted.
I read somewhere that I should change the name of that file so the ROM manger will download a new one ant htat will solve the problem. So I did a brilliant thing. I changed the name of install.zip on my phone. Now the phone will not boot. It is stuck on Galaxy s logo, and that is it. Cant access recovery, only download mod.
Any ideas how to fix that?
No one to help?!
klappy1 said:
I had a problem, with geting to CWM. It would get me to stock recovery with message:
E:error in /cache/update.tip
Status(0)
Instalation aborted.
I read somewhere that I should change the name of that file so the ROM manger will download a new one ant htat will solve the problem. So I did a brilliant thing. I changed the name of install.zip on my phone. Now the phone will not boot. It is stuck on Galaxy s logo, and that is it. Cant access recovery, only download mod.
Any ideas how to fix that?
Click to expand...
Click to collapse
Flash a stock rom .
Sent from my Android Smartphone
dkmali said:
Flash a stock rom .
Sent from my Android Smartphone
Click to expand...
Click to collapse
I did that, so one problem solved. But every time i flash any custom rom i get the same problem with CWM.
E:error in /cache/update.zip
Status(0)
Instalation aborted.
I need a solution for this problem, otherwise i cant flas anything else.
I am not new to android rooting and flashing and stuff but recently when I tried to make a custom ROM, when I try to flash it I get error.
Installation aborted. Error (status 7)
Click to expand...
Click to collapse
I know it is caused because of some errors in the META-INF folder but how do I fix this? I tried searching on Google too but all I found was useless posts and good for nothing sites.
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
krathos said:
Hi!
i got an error when i try to installl this new version Hypermax v8
Finding update package...
Opening update package...
Installing update...
Warning: No file_contexts
Samsung Galaxy S3 GT-I9300
Hypermax
Version 8
Flashing, please wait...
set_metadata_recursive: some changes failed
E: Error in /external_sd/Hypermax v8/Hypermax+v8.zip
(Status 7)
Installation aborted
Also i download V7 and V3... is the same problem.
Thanks for your help!
Click to expand...
Click to collapse
Install latest recovery Cwm,PhilZ or Twrp these errors normally happen with outdated recoveries.
Thanks
But did not work.
I installed the last version of CWM but i got the same error
krathos said:
Thanks
But did not work.
I installed the last version of CWM but i got the same error
Click to expand...
Click to collapse
Try PhilZ Touch Recovery, I never use anything else now.
RazorMC said:
Try PhilZ Touch Recovery, I never use anything else now.
Click to expand...
Click to collapse
Thanks!
works fine with Philz Touch 6.19.2
status 7 error
hi there...
i'm having the same problem trying to install Hypermax V9... Always getting the status 7 error..
I've wipe all the data and cache... but still geting the error...
I've install the philz_touch_6.41.6-i9300 and still having problems...
can anyone help me please?