I am new to the flashing rom thing.
Well what happened was....I thought was flashing the viper rom, and I had to use my recovery to unscrew what I didy. Can someone give a short tutorial on flashing roms? I am not a complete **** nugget btw haha.
I loaded the zip file on my SDcard and used the TWRP to flash from zip. Was that wrong?
install error with teamwin recovery.
e:error in /tmp/sideload/package.zip
(status 1)
That is what i got. I read that binary thing was not the updated.
Related
I've followed the steps listed in that thread but when I try to get into recovery mode with CWM (after I've already flashed it with Odin), it won't let me apply the update.zip due to the signature verification error thus preventing me from using CWM. (It only shows me the stock recovery menu)
I then started the process over from the start but this time, I installed CWM immediately after reverting back to DL09 and successfully updated it and was able to get into the CWM recovery menu - but now I can't apply the EA28 update.zip because of the following error:
assert failed: getprop("ro.product.device") == " SCH-1500" || getprop("ro.build.product") == "SCH-1500"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Am I doing something wrong and can anyone help me figure this out?
Any help would be greatly appreciated.
I should probably mention that I have the Samsung Galaxy S (Fascinate)
Disable signature verificaition in recovey and then flash
Sent from my HTC Desire using XDA Premium App
I'm assuming you're talking about my first attempt in which I meant to explain that I was never able to toggle the signature verification because I wasn't able to get into CWM recovery mode in the first place. The stock recovery menu doesn't allow the toggling of the signature verification.
I'm somewhat new at this so I might be missing something obvious here. If so, please let me know.
If you're following that thread, why are you installing CWM? The update.zip files that are posted there are the official update.zip files and are signed, so you can flash them just fine in stock recovery. Flash transfer the EA28 update.zip file to your SD Card, then flash DL09 via Odin. After flashing DL09, boot your phone to recovery and apply the update.zip. After that, start up your phone and transfer the ED01 update.zip to your SD card, reboot into recovery and apply the update.zip again. There is nothing in the entire process where you should be flashing CWM.
Thanks for the reply, imnuts, but the reason I'm installing CWM is because I want to flash one of the roms, i.e. Evil, and I don't know how to do it without CWM. I've successfully updated it to ED01 twice now, but afterwards, I can't go back into the CWM recovery mode - it only shows me the blue stock recovery mode and I don't know how to get back into the red CWM mode to flash one of the roms that are on the front page of the development page.
You need to flash CWM in Odin, then boot straight to recovery after you go to start you phone. If you allow the phone to boot normally after flashing, it will re-write the stock recovery over CWM. After you boot into CWM, flash a custom kernel and then you can boot up normally once, or also flash the ROM you want as well.
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
What do you mean by System Update? What are you on now? Are you trying to flash a ROM? Going to /Downloads and flashing OTA sharp shooter; not sure what you mean by this at all......
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
A HTC OTA update cannot be flashed using a custom recovery, that is why you are getting the second error. Also a OTA will fail when HBoot attempts to run it when you have a custom recovery installed, that is probably the source of. First error.
Bottom line is that an OTA cannot be installed when you have a custom recovery, so just fine a custom, rooted Rom that is based on the OTA and flash that instead.
all you gotta do is go to recovery try to install it when you get the error pull the battery and go back into recovery from bootloader
Thanks i would make you kool-aid but im fresh out... and that didnt work either
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
Yea i think your right... O well
Hey guys,
I had a similar problem when trying to flash my Nexus s with CyberGR mod.
Tried pretty much everything from trying to wipe system/dalvik/cache/factory reset and also disabled signature check.
Nothing really happened, i kept getting the error again.
Then i had flashed the recovery image (had a TWRP 2.0 running... changed it to CWM) and then the flash went on just fine.
So my guess is that this something to do with the recovery ROM. I would want to ensure that the recovery image used by the dev and mentioned in the install instructions be used.
Hope this helps.
I just reboot recovery and that fixes it when that happens. Have you tried that? No need for battery pull imo
hi @ all!
I have a damn problem:
I have stock rom, hboot 1.4 s-off, cwm installed and rooted (gsm)...
after that I wanted to overclock a little..so ok, I thought "just flash a kernel and go on!"
but no, it fails on intallation in cwm...it says:
[...]
Installing : (leedroid kernel 3.70)
Finding update package...
Opening update package...
Installing update...
-Checking Model ID
-Success!
-Model ID - HTC shooter
-Ok to proceed
Now flashing LeeDrOID Kernel V3.7.0
Extracting modules...
Extracting modules (yes, it stands there twice :S)
Packaging zImage...
Flashing boot.img ...
assert failed: write_raw_image ("/tmp/newboot.img", "boot")
E: Error in /sdcard/LeeDrOID_Evo-3D-GSM_V3.7.0-1.94GHz-KERNEL.zip
(Status 7)
Installation aborted.
I really don"t know why this happens, but I know that my wlan is broken now and that this is my second kernel from 2 what I wanted to flash, but no success...((((((( ://
thanks in advice
i dont think you can install a custom kernel on a custom rom. you also need a custom rom.
To fix ur issue use Flash GUI app to flash custom kernel. Link is in the forum somewhere for free or u can buy it off market.
The problem is you have S-On instead of S-Off.
If you S-Off properly u wont have the issue or wifi error
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
error in /tmp/sideload/package.zip status 0
Help some 1 walk me through this mess. Matts download is taking 10 hours to download. Is there an external link I can use>?
n30r3b3l said:
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
Click to expand...
Click to collapse
you have two options...one is redownload the zip file from a different site or open up the one you have and manually delete that zip file from there and it should bypass and continue on... what it ma do to the rom is on you ... if you extract the package.zip and then open it youll see what files the zip contains...if it contains no files it is likely corrupt and need to download a new rom...what site did you download the ROM from and are you a cdma or gsm model phone?
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
ishsed said:
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
Click to expand...
Click to collapse
I've noticed all the people who get that error are using twrp. So I recommend using 4ext.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery