LG-P500 overclock freezes screen - Optimus One, P500, V General

Hello,
I have installed the Megatron Rom and the Mik_OS Kernal. When I SetCPU the device to 768MHz+ the phone will freeze after 30 seconds. The screen goes black for a second and then the screen turns on again and the brightness is slightly brighter and the whole phone is frozen and I can't do anything . I have to take the battery out and put it in again to fix the problem. Right now I am running on 748MHz and sometimes 729MHz.
Please help me fix the freezing problem.
Thanks

thats called a kernel panic. sometimes your phone cannot handle the frequency that you set and when that happens, your phone freezes (or reboots or shuts down). if you want to be able to overclock to a higher frequency, try flashing another kernel

I found that on my wifes phone I can't overclock past 748 or else it has problems. My phone is stable at 768, same models. I guess it's just the way different phones behave.

skarookidoo said:
I found that on my wifes phone I can't overclock past 748 or else it has problems. My phone is stable at 768, same models. I guess it's just the way different phones behave.
Click to expand...
Click to collapse
There are some phones that are stable at 806 while some guys here reported kernel panics at 729. It differs.

sweetnsour said:
thats called a kernel panic. sometimes your phone cannot handle the frequency that you set and when that happens, your phone freezes (or reboots or shuts down). if you want to be able to overclock to a higher frequency, try flashing another kernel
Click to expand...
Click to collapse
If I need to flash another kernal then what kernal do you recommend for me? I usually like performance based ones.
Sent from my LG-P500 using XDA App

NanoNoodle said:
If I need to flash another kernal then what kernal do you recommend for me? I usually like performance based ones.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
For performance? franciscofranco kernel of course Search in dev. section...

Garuxa said:
For performance? franciscofranco kernel of course Search in dev. section...
Click to expand...
Click to collapse
Ok thanks. I'll try it now

Fail reboot
Garuxa said:
For performance? franciscofranco kernel of course Search in dev. section...
Click to expand...
Click to collapse
I have installed the Franco Kernel but when I reboot the phone it says that it is overheated and it shuts down. I have rebooted several times and it still doesn't work. I am immediately changing the custom kernel.

Hye i hve an official gingerbread 2.3.3 V20d rom(rooted) and i wan. To overclock my optimus one, do i need a custom kernel to do that? Im new to this so pls guide me

yes you need a custom kernel

samrox144 said:
yes you need a custom kernel
Click to expand...
Click to collapse
thnks, can u suggest me the custom kernel for the stock rom? and do i need custom recovery?

you need a rooted phone and a kernel that works with the stock rom you are on.
most kernels only seem to work with some custom roms. But you search and you will find
I ran 480mhz and 729mhz for the longest time with no issues.
Right now I'm at 122mhz and 480mhz (longer battery life), and the fact that I'm not running games or intensive graphics or anything.

ROM
skarookidoo said:
I found that on my wifes phone I can't overclock past 748 or else it has problems. My phone is stable at 768, same models. I guess it's just the way different phones behave.
Click to expand...
Click to collapse
Which rom do u use??? the stable 1 u had mentioned at 768MHz???

768mhz is just too high, the most stable and highest clock for our p500 is 729max and 691min
I tried 768 for a day and the mother board burnt the other day.

MANOJ5329 said:
Which rom do u use??? the stable 1 u had mentioned at 768MHz???
Click to expand...
Click to collapse
You shouldn't be going higher than 729 on the p500
Sent from my Galaxy Nexus using Tapatalk 2

Oh, oops, I've been running my p500 at 768mhz for the last 4 months and apart from the battery draining 1% a minute and the battery temperature reaching 38C° it doesn't crash, I tried 787mhz but it crashed in the first 10 seconds.
Sent from my LG-P500 using xda app-developers app

Related

[Q] Battery Draining

How to extended the battery life time and minimize it's draining during your daily usage of the SGS2 ?
Also is. Over clocking. Increases the battery draining ?
To extend your battery life, stop using your phone and/or decrease the screen brightness when using it.
Overclocking will probably increase the battery drain if your phone is using the overclocked frequencies.
To increase your battery life turn your phone off every time you are not using it, turn it on when you want to use it, that will get you good battery life.
Honestly search this forum there are a handful of threads that give guides and tutorials on how to maintain battery life not that difficult to search my friend.
Sent from my GT-I9100 using Tapatalk
konrad2004 said:
How to extended the battery life time and minimize it's draining during your daily usage of the SGS2 ?
Click to expand...
Click to collapse
Use it as a paperweight and that should be good enough..Or just keep having the charger in it while you are at home
anyway lame jokes aside. get yourself a decent kernel. in your case speedmod. set the governor of your choice and let the magic begin......seriously for you that kernel should be fine. just do not get to excited when the magic begins and you start kissing your phone though just do not tell us here
Hope that helps mate
Suarez7 said:
Use it as a paperweight and that should be good enough..Or just keep having the charger in it while you are at home
anyway lame jokes aside. get yourself a decent kernel. in your case speedmod. set the governor of your choice and let the magic begin......seriously for you that kernel should be fine. just do not get to excited when the magic begins and you start kissing your phone though just do not tell us here
Hope that helps mate
Click to expand...
Click to collapse
sorry to interrupt this thread, but wat do u mean by governor of ur choice? im running speedmod aswell
thanks
adamski123 said:
sorry to interrupt this thread, but wat do u mean by governor of ur choice? im running speedmod aswell
thanks
Click to expand...
Click to collapse
Speedmod is fine on default. No need to change governor unless you want to try conservative but I recommend to leave speedmod as is.
Sent from my GT-I9100 using Tapatalk
nikzDHD said:
Speedmod is fine on default. No need to change governor unless you want to try conservative but I recommend to leave speedmod as is.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
ohh u mean scaling of the cpu
oh yeh i never change that :L
its on ondemand now on setcpu
To be honest you don't need to use any of those type of application you are better off just removing them and leaving the kernel on complete stock.
adamski123 said:
ohh u mean scaling of the cpu
oh yeh i never change that :L
its on ondemand now on setcpu
Click to expand...
Click to collapse
Governors are for scaling cpu as you just said. As Nikz said if you are using speedmod no point using any cpu apps as the kernel does all the work for you
nikzDHD said:
To be honest you don't need to use any of those type of application you are better off just removing them and leaving the kernel on complete stock.
Click to expand...
Click to collapse
exactly..might try speedmod someday when i get bored of cm9
Suarez7 said:
Governors are for scaling cpu as you just said. As Nikz said if you are using speedmod no point using any cpu apps as the kernel does all the work for you
exactly..might try speedmod someday when i get bored of cm9
Click to expand...
Click to collapse
Ahh tried an earlier build and was fine but one thing I don't like about CM is the camera quality, I know it's not a digital camera but a TW rom produces better pics.

[Q] How can i overclock my optimu one, up to 780 mhz. Now i can overclock only 748

How can i overclock my optimu one, up to 780 mhz. Now i can overclock only 748 . :S
Buy another LG P500 and see if your overclock is higher.
it's releated to the kernel you're using
Sent from my LG-P500 using tapatalk
i agree to unicycler,.. it really depends on your kernel.. some kernel can OC more than 768 but its not stable and will cause a kernel panic then your phone will reboot
i only OC up to 768 and i dont have any problems at all
Lol I can Oc 864 performance bench lastest antutu
kernel CPU voltage overclock
You can search another rom and try it.I am trying to increase CPU voltage so that the CPU could running at a very high speed ,but i have not find an efficent way.I would like to make my P500 Running at 800Mhz stably.Could someone help me?
eeee616 said:
Lol I can Oc 864 performance bench lastest antutu
Click to expand...
Click to collapse
How is it possible?
Just use another kernel or ROM... Each kernel will also give you different governors! ROM PerfectPeso2.2
I use franco kernel 4# with nightly foure. I can overclock only 748 Mhx
It depends on cpu also some can oc 710 and some can oc up to 806
vikasb32 said:
It depends on cpu also some can oc 710 and some can oc up to 806
Click to expand...
Click to collapse
Yea we have big hardware differences... I can OC to 787...
I was born in the '90's... 1290's >
Echelonex said:
Just use another kernel or ROM... Each kernel will also give you different governors!
Click to expand...
Click to collapse
And what are you using to get those scores?
Sent from my LG-P500 using XDA Premium App
Esterra said:
And what are you using to get those scores?
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Only PerfectPeso 2.2, and i activated "kick ass kernelizer" which is included in ROM.
congrats, you can now cook with your p500
Echelonex said:
Only PerfectPeso 2.2, and i activated "kick ass kernelizer" which is included in ROM.
Click to expand...
Click to collapse
I`m using the same, but i`m stable only on 729mhz.
When i use more, my phone freezes
I suppose that i have bad hardware in my O1.
Esterra said:
I`m using the same, but i`m stable only on 729mhz.
When i use more, my phone freezes
I suppose that i have bad hardware in my O1.
Click to expand...
Click to collapse
Thats a bummer.... It looks like I got lucky with mine... On mik_os 6.5.7 got it running about 10min before crashing on 864Mhz... But still, even on 729 its pretty fast!

Stuck when overclocking

I have Galaxy s2 with Resurrection Remix ROM with Siyah-s2-v4.0.1 karnel... When i try to overclock it ti 1500-1600mhz it stucks and powers off.
What should i do ??
Einstein97 said:
I have Galaxy s2 with Resurrection Remix ROM with Siyah-s2-v4.0.1 karnel... When i try to overclock it ti 1500-1600mhz it stucks and powers off.
What should i do ??
Click to expand...
Click to collapse
why do u want to overclock in the first place.since 1200mhz is more than enough for the beast (ur GS2) to wrk efficiently. do rewert back, since overclocking or undervolting will always lead to issue's like, overheating,random freeze's and reboots rather than improving the performance
Sun90 said:
why do u want to overclock in the first place.since 1200mhz is more than enough for the beast (ur GS2) to wrk efficiently. do rewert back, since overclocking or undervolting will always lead to issue's like, overheating,random freeze's and reboots rather than improving the performance
Click to expand...
Click to collapse
well... thanks mate i saw some videos where they overclock it they dont have the same problem... i whonder is it just me or...? i want to see the benchmark results with 1600mhz procesor...
Einstein97 said:
I have Galaxy s2 with Resurrection Remix ROM with Siyah-s2-v4.0.1 karnel... When i try to overclock it ti 1500-1600mhz it stucks and powers off.
What should i do ??
Click to expand...
Click to collapse
All phones aren't created equally and therefore some can't handle being oc or uv. That being said, have you tried to give out more voltage?
Sent from my Nexus 7 using xda premium
kilometers4 said:
All phones aren't created equally and therefore some can't handle being oc or uv. That being said, have you tried to give out more voltage?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Can you tell me some useful tweeks so i can speed up my phone (if you had the same karnel or rom...) THANKS !!
Einstein97 said:
Can you tell me some useful tweeks so i can speed up my phone (if you had the same karnel or rom...) THANKS !!
Click to expand...
Click to collapse
Galaxy S2 is very fast! There is no need to overclock your device. If you are looking for the best stats and performance for the Galaxy S2. Go back to Gingerbread. Meaning install a custom gingerbread based Rom and Kernel. Mix and match different Kernels and Roms until you find a Rom and Kernel that suits you. Remember its not all about the best stats on benchmark tests. Enjoy your phone!!

[Q] can setcpu damage phone???

wondering if the phone can get damaged if u changing cpu speed constantly by profiles? not overclocking thought.
No it won't
《spilled from dragon jellybean rom》
bala_gamer said:
No it won't
《spilled from dragon jellybean rom》
Click to expand...
Click to collapse
And if the speed goes down does it means that voltage goes down as well?
Since i have rooted my sg3 and instal custom room and got setcpu i have set some profiles but seems like my battery drain a way quicker then when it was unrooted. Any advise please
zbojnik65 said:
And if the speed goes down does it means that voltage goes down as well?
Since i have rooted my sg3 and instal custom room and got setcpu i have set some profiles but seems like my battery drain a way quicker then when it was unrooted. Any advise please
Click to expand...
Click to collapse
Try undervolting i undervolt at 50mv and set the governor to ondemand or pegasusq
Thealshear said:
Try undervolting i undervolt at 50mv and set the governor to ondemand or pegasusq
Click to expand...
Click to collapse
How will i undervolt in setcpu? Can't do it there. Do i have to download another apk?
zbojnik65 said:
How will i undervolt in setcpu? Can't do it there. Do i have to download another apk?
Click to expand...
Click to collapse
You will need a kernel that supports Undervolting and then you can do it in SETCPU
i suggest Siyah's kernel. im OC'd to 1.6mhz and UV'd at -100mV. my phone is stable
sent from my quad turbo 1.6L GT-i9300
No, only users can wreck a phone
Overclocking your S3 above 1800mhz will SURELY damage your hardware, the most stable and recommended clock speed when overclocked is 1600mhz,1800mhz and above are highly experimental.
nhariamine said:
Overclocking your S3 above 1800mhz will SURELY damage your hardware, the most stable and recommended clock speed when overclocked is 1600mhz,1800mhz and above are highly experimental.
Click to expand...
Click to collapse
1,8Ghz should be possible i guess. The Note2 has the same cpu and is standard clocked to 1,6 Ghz.
gee2012 said:
1,8Ghz should be possible i guess. The Note2 has the same cpu and is standard clocked to 1,6 Ghz.
Click to expand...
Click to collapse
So if can't overclock stocked kernel can u underclock it? I have stock kernel and setcpu so wondering if i have couple of profiles set if they actualy work?
Yes you can underclock mate
Sent from my GT-I9300 using xda premium
gee2012 said:
Yes you can underclock mate
Sent from my GT-I9300
I did and my phone seems a bit freezing. I suggest if i just simply stop using setcpu it will go back normal
Click to expand...
Click to collapse
zbojnik65 said:
gee2012 said:
Yes you can underclock mate
Sent from my GT-I9300
I did and my phone seems a bit freezing. I suggest if i just simply stop using setcpu it will go back normal
Click to expand...
Click to collapse
Not true, i`am using Voltage Control Extreme right now and set the max clockspeed to 1 Ghz on a stock kernel in ARHD 9.5.0 and saved these settings as init.d script at boot and it works, even after reboots it`s still 1 Ghz.
Click to expand...
Click to collapse
gee2012 said:
zbojnik65 said:
Not true, i`am using Voltage Control Extreme right now and set the max clockspeed to 1 Ghz on a stock kernel in ARHD 9.5.0 and saved these settings as init.d script at boot and it works, even after reboots it`s still 1 Ghz.
Click to expand...
Click to collapse
and what if i just wanna everything back to original conditions. will restore to stock firmware put everything to normal???
Click to expand...
Click to collapse
zbojnik65 said:
gee2012 said:
and what if i just wanna everything back to original conditions. will restore to stock firmware put everything to normal???
Click to expand...
Click to collapse
Yes, but you just set cpu speed back to 1400 Mhz and you`re back to stock clock speed mate
Click to expand...
Click to collapse
gee2012 said:
zbojnik65 said:
Yes, but you just set cpu speed back to 1400 Mhz and you`re back to stock clock speed mate
Click to expand...
Click to collapse
and my last question will be if its normal that phone doesn't use same cpu speed all the time.it changes speed under different conditions.i guess it would be wastage of battery for example run phone on 1.4 ghz on locked screen
Click to expand...
Click to collapse
zbojnik65 said:
gee2012 said:
and my last question will be if its normal that phone doesn't use same cpu speed all the time.it changes speed under different conditions.i guess it would be wastage of battery for example run phone on 1.4 ghz on locked screen
Click to expand...
Click to collapse
seems like i gave answer to myself right there.
thanx to everyone to give me a bit of knowledge.hope i hit thanx button to all of u
Click to expand...
Click to collapse
A friend of mine downloaded SetCPu. She did something and now the phone is just dead. No screen, no vibration. Heck it doesnt even go in recovery. Either the battery is totally dead or we have a very expensive paper weight here.
PROGUERAM said:
A friend of mine downloaded SetCPu. She did something and now the phone is just dead. No screen, no vibration. Heck it doesnt even go in recovery. Either the battery is totally dead or we have a very expensive paper weight here.
Click to expand...
Click to collapse
Maybe, she overclocked CPU too much for long time and burn out the CPU... in which case only solution is replace motherboard
Sent from my GT-I9300 using xda premium

Legend CPU Question

Hey,
I have currently the CM9 and there you can overclock the CPU around.
How far can I safely overclock high sodas because everything is still stable?
Try it out!Every phone is different.
I can't even overclock to 768MHz
Sent from my Legend using xda app-developers app
filipathtc said:
Try it out!Every phone is different.
I can't even overclock to 768MHz
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse
Me neither...:crying:
786Mhz works fine for me ^^ Unless I plug in the car charger AND use GPS. Then it overheats and reboots
I usualy keep it at 787MHZ, but i`ve had it at 806MHz and even on 825MHz and i had no problems. Only...i don`t really see the reason why to overclock it so much. I`ve never had the need of it so far.
I have mine at 768MHz and I've only gotten a random reboot once or twice.
and strangely after flashing CM10 alpha I've gotten three reboots today at 768MHz... Maybe it was because of the different governor
I'll put it back to ondemand and see how it goes now.
My GF's Legend works flawlessly at 768Mhz under CM7.2, although she never uses GPS nor play games for a long time so I can't be sure it wouldn't heat up too much under heavy use.
lolamarcel said:
Hey,
I have currently the CM9 and there you can overclock the CPU around.
How far can I safely overclock high sodas because everything is still stable?
Click to expand...
Click to collapse
787 should be fine

Categories

Resources