Hi,
My HTC Mozart is bricked. It is not even starting in boot loader mode.
I am planning to flash the boot loader using RIFF BOX. Can anyone help me with the JTAG pinouts for HTC Mozart? I opened the phone and found that there are some solder pads. But unable to identify the JTAG ones.
Please help!
Just run JtagManager (RIFF) select Mozart in resurrection tab and you will find JTAG pinouts.
Thanks for the reply.
I ordered RIFF box yesterday and waiting to be recieved. Meanwhile, I will build the JTAG adapter for same. Can you please post the screenshot of the pinouts? It will help me to build a PCB for the adapter.
Related
HELLO my friends!
Can you help me to revive my qtek 9100 whit Jtag interface.
I need testpoins for Jtag of G4 mainboard (TDO,TDI,TMS,TCK...)
Thanks in advance for ALL!!!
To the best of my knowledge nobody has revived their wizard using JTAG contacts. It might be a myth, or just unproven yet.
Wizard jtag Done yeeeeehaaa!
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
fsl13 said:
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
Click to expand...
Click to collapse
HEY lissten HOW DID U GET THE places where to solder the JTAG cables to motherboard ? please answere
Wizard jtag test points
I found this on another site, hope it is some help.
I am extremely sorry that ihave been away and couldnt respond
Ok im all ears and here to help you till you make it to the end
now tell me your actuall status and what you need
i luckily have all the files needed to jtag but
right these unfortunately i have a very bad internet connection
PM me and we ll take it from there
dont worry i am with you now
Mr FSL13
Can you please come to PM or IM
i have also a one WIZA200 Dead while Update
and i need to JTAG it
its very urgent
can you please help me in this problem?
Thanks in Advance
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
souriant said:
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
Click to expand...
Click to collapse
RIFF JTAG Wizard look at http://www.jtagbox.com/tag/security-features/
Guys, I'm frustrated now. I've refreshed the ROM of my G4 version of Dopod 818pro (2.15.0001 or something I just can't remember). Unfortunately it fails and I cannot even turn the power on. My WinCE colleague told me that the Boot Loader was damaged. I am now seeking for some place to re-program the chip and hope if someone can provide me boot loader program. I really appreciate your guys help!!!
Are your Bootloader Realy damage? You mean you cant enter it? Or you havent Power to start your Device?
SD Flashing doesnt work without Bootloader!!
JTAG Flashing (hardware nearest Flashing!!) isnt developed for G4 Plattform. (i think so ... look in the Wizard board ... they talk about JTAG flashing and Wizard G4 must simulare like Prophet G4!!)
the bootloader really damaged, I cannot enter the three stripe screen by holding CAM, PWR button and hit reset hole. Do you mean that I even cannot use JTag to burn the chip???
I do have two fully charged batteries. But it should not be a problem of battery, I tried to connect it to charger but it gives no response, no LED
Using JTAG to revive a wizard is either a myth, or an undiscovered secret. If you cant get into bootloader, your chances of reviving your device are slim.
JTAG isnt a secret ... its more like ... hardware knowlage. If you know what IC is your ROM. You can found over the IC Spec the right Pins for JTAG Programming. If i can get a G4 S200, i can try my best.
yes, I know that using Jtag to rewrite boot loader is complex, but it seems like it's my last chance. NetrunnerAT I really appreciate your help but I'm in Shanghai, China so I have to find someone locally who can help me with that. Wish me good luck and I'll keep you guys updated about the result
If I can find someone who can help Jtag my phone, where can I find the correct bootloader program for my cell? is it downloadable?
guys, I finally found a place to revive my prophet. However, they don't know how to jtag it either, neither do they have a programer to rewrite the chip because they say the programer is very very very expensive. They just changed the old chip with one which has correct ROM and now my G4 Prophet turns to a G3 one...anyway, I can use it now.
Thx!
You have change your rom and it is now G3!!
Can you say me what IC they have exchange! If i know it ... and get a damage device, its possible to found a solution for all Prophet users!
No problem, I kept the damaged IC at home, I'll check the model No. and will let you know
er... One more question, I want to dump the current ROM to my SD card, however the wiki doc says it needs to unlock G3 first. But another doc also says unlocking G3 will downgrade my OS to 1.0.13.21. It's like a kind of deadlock, can I just unlock G3 without changing OS?
uhm ... i think you must downgrade your OS first to CID unlock ... after that you can upgrade to your rom and make SD-Dump!
ok, then that is to say i'll never be able to get a backup of the ROM I currently have.
I'll wait for some weeks and will try to "torture" my prophet again. It was just fixed and I'm supposed to "rest" it for some days, but sooner or later it'll be unlocked, hey heyhey....
Hi, I'm back, the chip is a "M-System MD8832-d16-v3-xp" with a clearly name "Disk On Chip" on it, hope this can help you locate the chip
http://www.m-systems.com/NR/rdonlyr.../0/EOL_DOC_G3_P3.pdf|EOL_DiskOnChip_G3_P3.pdf
Cool ... i read some PDFs ... this is are very nice entry in the PDF!
Compatibility Issues
The recommended replacement, DiskOnChip G4 1Gb/2Gb 9x12mm FBGA, and H1 2Gb
12x18mm FBGA are ball to ball compatible with DiskOnChip G3/P3 7x10mm, 9x10mm FBGA
products that are being discontinued. It is necessary to upgrade software based on TrueFFS 6.2.x
to TrueFFS 6.3.2 and above when upgrading to DiskOnChip G4.
If the different betwen G3 and G4 is the TrueFFS Driver and the G4/H1 is Pin Conpatibel ... possible if i get a half damage device i try to solder a H1 DOC on the PBC and reformat it.
[edit]Holly ****! THX i have found the Migration Document with JTAG Pins!!!
http://www.m-systems.com/NR/rdonlyr...MigrationGuideDOC_G4_1Gb_to_H3_1Gb_Rev0.2.pdf
how are you going to access the pins on a FBGA?
yanuk said:
how are you going to access the pins on a FBGA?
Click to expand...
Click to collapse
you dont. you take a bricked one, de-solder it, and manually trace them to somewhere on the motherboard using a multimeter.
can any body help me with a jtag points for a g4 wizard doomed with a incorrect ipl
Give me a damage Wizard board and i say the JTAG Pins! G4 and G3 have the same JTAG Pins.
I search for a damage Prophet to but i doesnt want pay over 80€ for a community project without any payment. It some on give me a wizard or prophet Board ... i desolder the IC ... search for JTAG Pins ... and reflash it ... send it back but working :->
the device doesnt damage if i resolder the DOC ... i have the right soldering mashine.
NetrunnerAT
Where you saw on DOC points jtag ?
You need the signals TDO TCK TMS TRST TDI.
DOC only memory and there no these signal.
What jtag you will use? And no program for flash DOC through jtag - see about Universal jtag.
hi does anyone no of any jtag specialists in the united kingdom that can bring my wallaby back to life? i tried to flash a working wallaby pda and somehow the bootloader is gone and stuck on a bootscreen ,,if anyone can atleast point me in the right direction to get jtag done on this old device i would appreciate it .
as this device may be old but it was fully working until i used lumpistefans kitchen to add the rom now i have a dead device and when i contacted him about it didnt reply until i started busting balls on here no worrys ,thanks to him i have a dead device and do not blame me for i am a electronics engineer ,,pc engineer and no these pdas inside out but i will not do jtag myself as thats very delicate work ,,,if u or anyone no of any jtag specialist in the united kingdom please let me no so i can salvage my old wallaby back ,,,since thanks to lumpistefans crap kitchen ,,this pda is sitting in a box with no bootloader u tell me why my bootloader get erased from his rom ?? oh well
since then i have got myself a trinity handset ,,and now i own a htc athena
but i will never give up on recovering my wallaby as it was a lovely pda had good use out of it
Can someone help me to locate flash chip on mainboard of tytn in order to replace it. I have two mainboard, none work. on first I have flash chip dead (only can start bootloader but cannot upgrade any hardspl or any rom, or radio... on second mainboard have problem with main quallkom chip, dont have all contact on board itc ripped from board... So I think to put the flash chip from second to first board, but I can't find any scheme over the internet for tytn chip position! I really need for help from someone!!! PEACE!!!
Hello
I killed my HTC TyTN II.
Flashed a Touch Diamond ROM to it and it stoped Working,not even the lights turn on. And it doesnt go to Bootloader mode unfortunatly.
I sent it to repair and they said to me that that was the MainBoard Problem and it needed to be substituded.
Do you know any place i can get a Mainboard or HTC TyTN II Parts like Chips and other stuffs.
Hope u be ablle or already fixed your device.
Thankx in advance for your help.
Hi!!!
I have found in SPV C550 J-tag pins.
Up
1-NTRST
2-TMS
3-TCK
4-TDO
5-TDI
Down.
Pin are in BLUE-LABEL.
Foto is T-Mobile SDA (Sonata) but pins I searched in SPV C550.
There SPV is without processor ;>
Greetings from Poland
Great find!
Thanks a lot and... pozdrowienia!
Fajnie jak się przyda, poświęciłem swoją "latarkę"
are that jtag pins have any connection with display message "data crashes. contact your service" on my spv c550?! Are they broken or somthin' cuz some guy tell me that i must change them to fix my problem?
Did someone try this?! Are the points ok?! I am going to flash my hurricane through this JTAG points so i'm not going to suprise me if something didn't worked ok?! And, is the WIGGLER cable ok for this, and if someone have bootloader and all need software for the JTAG flashing!? I will be thankfull!!!
who can give a complete guide how to make it work for a typhoon . now i use a wiggler cable can communicate with my typhoon, also can load a .nb file ,but how can i let my typhoon into the wish bootloader, my typhoon is in using now all is ok i just want to test how to change the SPL version via jtag method,everytime i loaded the SPL nb file ie.064, clicked run--go from--10000000---ok,if i hold the camera button the phone just white screen nothing happen cannot detect by mtty,if i dont hold the camera button the phone will startup nomally into wm6.1.
can somebody give me some help?thanks very much!