Hi, i have Wolf´s rom (2.2.1) with 54er baseband. i want to update... but ive flashed the baseband update (71) first... no i cant go in the recovery to flash anything.... what can i do plz help!!
Flash the old kernel back, see if it is working.
wont work.. tried... it boots up but now i have no wlan and cant write and recive sms... :-( cant flash original sony software... it says that the server are overloaded...
Forgot to remind you about the baseband too.
Connect to SEUS or PCCompanion and update.
Then root and install custom kernel of your choice
This is in the wrong section.
Now you have the correct advice you should not reply in this thread.
PM me if you have any problems or re open this thread in the Q&A section.
I will not reply in this thread
now i have:
2.2.1 andoid
2.1.54 baseband
2.6.29 [email protected]#1 baseband
and the wolf xperia TW009 rom...
but i cant go to recovery
@OP, unfortunately, there is no solution for your problem. You will have to start fresh. Flash your phone with the latest 2.3.3 GB FW pre-rooted by DooMLorD, and enjoy.
and how?!?!!? pc compangin says that the sony ericsson server are overloaded...
Using flashtool, flash this:
http://www.multiupload.com/JEXUAHAZTL
Thread moved to Q&A. Thanks for reporting and be good to each other
how to flash a .zip with flashtool? *smile*
body85 said:
how to flash a .zip with flashtool? *smile*
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
body85 said:
how to flash a .zip with flashtool? *smile*
Click to expand...
Click to collapse
Sorry for late reply(my phone is out of battery), but anyway, unzip the the .ZIP file first and put it in the "firmware" folder(if I'm not mistaken) in the flashtool folder.
Related
Hi guys, It may sound silly but i generally have no clue about it, Is there any other way to update my x10's baseband without connecting to a computer? like via SD card? i only ask as my charger port has failed on my phone.. and am waiting to send that off in the next few weeks to get repaired
Thanks
Stevon said:
Hi guys, It may sound silly but i generally have no clue about it, Is there any other way to update my x10's baseband without connecting to a computer? like via SD card? i only ask as my charger port has failed on my phone.. and am waiting to send that off in the next few weeks to get repaired
Thanks
Click to expand...
Click to collapse
If you have Xrecovery, you could pre-load your sdcard with whatever zip files you wanted by directly attaching it, sdcard, to your pc.
No, which is why Bin4ry didn't use xRecovery...
Bin4ry said:
Download latest flashtool here:
http://forum.xda-developers.com/showthread.php?p=10738467
Extract the Dualtouch.rar from here:
http://www.multiupload.com/K97IO1FTAR
Mirror:
http://dl.dropbox.com/u/17170888/Dualtouch.rar
FTF-File for Flashtool Version 0.2.4 or higher:
http://www-stud.uni-due.de/~sfanmakr/X10Flash/X10_1.0_Bin4ry_Dualtouch.ftf
Copy this File into the firmwares folder directly!
and copy the "Dualtouch" Folder inside the Firmwares Folder of Flashtool.
After that just flash and reboot =)
If the Rom is capable of Dual-/Multitouch you will have it now.
Regards
Bin4ry
NOTE:
This will just ADD dualtouch feature to your ROM. It will not wipe userdata or something else, see it as an addon =)
If you having problems in stock Rom with Multitouch follow this guide: (thanks My_Immortal)
http://forum.xda-developers.com/showthread.php?t=921302
Click to expand...
Click to collapse
You can use 2 methods for Dualtouch.
#1 FlashTool
#2 xRecovery
XperiaX10iUser said:
No, which is why Bin4ry didn't use xRecovery...
Click to expand...
Click to collapse
This,
http://forum.xda-developers.com/showthread.php?t=936462&highlight=2.1.A.0.435+xrecovery
is the link for 435 for xrecovery.
Wouldn't that work?
The kernel can't be flashed with xRecovery, which as already stated is why you need to use the flash tool.
Sent from my X10i using XDA App
XperiaX10iUser said:
The kernel can't be flashed with xRecovery, which as already stated is why you need to use the flash tool.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks, missed that nuance. Explains some problems I've had.
i dont want open a new thread for my question so i aks here
a few days ago i updated my phone with SEUS to 2.1.A.0.435 rom and 2.1.54 kernel
and there was pinch-to-zoom activated...
but i wanted the freex10 beta4 and flashed it on my phone...
now ther is no mediascape and i dont know if the pinchtozoom feature only works in this or if its gone...
can you tell me whats going on?
(sorry if i wrote something wrong my english isnt the best... )
BlackWodka said:
i dont want open a new thread for my question so i aks here
a few days ago i updated my phone with SEUS to 2.1.A.0.435 rom and 2.1.54 kernel
and there was pinch-to-zoom activated...
but i wanted the freex10 beta4 and flashed it on my phone...
now ther is no mediascape and i dont know if the pinchtozoom feature only works in this or if its gone...
can you tell me whats going on?
(sorry if i wrote something wrong my english isnt the best... )
Click to expand...
Click to collapse
There is no mediascape or other sony bloat ware on beta 4.. If you already had dual touch you wouldn't have lost it by flashing beta 4, that isn't possible.have you tried it in gallery or in the browser?
fiscidtox said:
There is no mediascape or other sony bloat ware on beta 4.. If you already had dual touch you wouldn't have lost it by flashing beta 4, that isn't possible.have you tried it in gallery or in the browser?
Click to expand...
Click to collapse
i know that...
and yes the dual touch isnt lost it works in every app... but the pinch-to-zoom is away.. except it realy worked only in mediascape... sad...
pinch to zoom does work though, that is the point of my whole post. Try it in the browser or gallery..... :S
somehow it wont work for me..
Sent from my xperia using XDA App
Is there anychance that someone could uplaod the 2.0.46 baseband for flashtool as i restored the stock SE 2.1 and it justs reboots after the sony graphics i think its cause i it doesnt work with the new 2.1.54 baseband thanks
Reinstall your firmware.
BlackWodka said:
somehow it wont work for me..
Sent from my xperia using XDA App
Click to expand...
Click to collapse
Theblackfleet said:
Is there anychance that someone could uplaod the 2.0.46 baseband for flashtool as i restored the stock SE 2.1 and it justs reboots after the sony graphics i think its cause i it doesnt work with the new 2.1.54 baseband thanks
Click to expand...
Click to collapse
Use SEUS to get fresh firmware, then flash 2.1.A.0.435 for MT, search for HOWTO.
ok will it go back down to the 2.0.46 baseband then?
Theblackfleet said:
ok will it go back down to the 2.0.46 baseband then?
Click to expand...
Click to collapse
Depends on your operator
about bundeling files in flashtool for changig baseband
deleted- sorry wrong thread
Friends do not know what to do, I had my x10 and xrecovery rooted, the room was going to install v4.02.1 WB 2.3, when I install all the wipes, but also install a custom Karnel "DoomKernel: modFXP-DooMKernel-v01 CM7FXP-S-(S-series). "
Now my xperia does what he wants, it always hangs on the screen of sony ericcson, few loads an image that says "free xperia project" and from there it does not, and not accessible to xrecovery.
I have tried to repair it with SEUS but it says it is the latest version and dont gives me the option to repair.
The Flashtool shows me many errors when trying to go back to 2.3 stock, and says "Flash aborted" AND NOT TO DO: '(
I hope can help me ...
Sorry for my bad use of English.
Did you try to reinstall xrecovery through Flashtool?
atikabubu said:
Did you try to reinstall xrecovery through Flashtool?
Click to expand...
Click to collapse
Friend me that option is grayed out in the flashtool
my friend flash generic frimware on flash tool version 3.0 there's a help how to revive your x10...
http://forum.xda-developers.com/showthread.php?t=920746
iruganisan said:
my friend flash generic frimware on flash tool version 3.0 there's a help how to revive your x10...
http://forum.xda-developers.com/showthread.php?t=920746
Click to expand...
Click to collapse
It worked! xD but in another PC, I can only dude, I have stock GB ... I have to flash again baseband and Karnel necessary for the room of WB?
And if I wanted to put a custom Karnel with the WB room, which is the correct for install? (DoomKernel)
emmanueldmc said:
It worked! xD but in another PC, I can only dude, I have stock GB ... I have to flash again baseband and Karnel necessary for the room of WB?
And if I wanted to put a custom Karnel with the WB room, which is the correct for install? (DoomKernel)
Click to expand...
Click to collapse
glad to help, it depends on you, as of now im using Doom kernel, but be ware that this kernel can damaged your device if you overclock and use it for a long time.... doom kernel is very fast....
iruganisan said:
glad to help, it depends on you, as of now im using Doom kernel, but be ware that this kernel can damaged your device if you overclock and use it for a long time.... doom kernel is very fast....
Click to expand...
Click to collapse
Friend understand it, but I meant to Karnel of all there is to devo used to prevent what happened to me previously Karnel "DoomKernel: modFXP-CM7FXP DooMKernel-v01-S-(S-series)." That did not answer my xperia ...
x10I Help Needed .
I flash X10 to 2.3.3 or 2.3.4,bb 71,my phone will often reboot .
But i use 67 or other baseband will not reboot.
Please tell me why it is like that?
T.T........................
2.3.3 only works on bb .71 no other bb will work
restore with pc companion for getting stock SE rom
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
tracyzhen1202 said:
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
Click to expand...
Click to collapse
what are you flaashing??
and try to restore by SEUS or pc companion and try reflashing
I try to restore by SEUS or pc companion,but the problem is not resolved.
2.1 ,other bb,X10 was OK
did you try flashing generic 2.3.3 firmware by flashtool?
yes i try,but ......
then sorry I have no ideas...
go to 2.1
-root and install xrecovery through newest flashtool
-download wolfs 2.3.3 rom and bb .71 from his thread
-put rom in sd card
-reboot into xrecovery then wipe data cache
-install the rom
DONT REBOOT NOW
take the battery out and then open flashtool and put phone in flash mode
flash the baseband from flashtool
now you can reboot
I hope this helps
Flash global generic 2.3.3.ftf with flashtool
Sent from my X10 using XDA
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
tracyzhen1202 said:
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
Click to expand...
Click to collapse
did you try flashing the way i suggested 2 posts before?
yes,... each of these methods i have tried.
I think this is probably the baseband problems
tracyzhen1202 said:
yes,... each of these methods i have tried.
I think this is probably the baseband problems
Click to expand...
Click to collapse
here is the collection of baseband http://forum.xda-developers.com/showthread.php?t=960527
if u dont have urs
just flash ur default baseband
thats the only way
or u can have .71 baseband just flash the custom roms.....
thank u very much.
my phone is X10I,Locked bootloaders.
can i flash 2.0.72 baseband?
Nobody???
I flash 2.1,other bb,everything is fine.
but i found the battery overheating will reboot
..............
Hi all, thanks and sorry if I am too noob. I am looking for solution for 2 hours and I cant find, maybe anyone can help me
I have Sola MT27i and I was trying to update to ICS and root my Xperia Sola for hours. I updated with Sony Companion and then I found the thread for root with Flashtool mode (flash to 6.1.1.B.1.10 with Flashtool, root using Bin4ry's method, then flash to 6.1.1.B.1.54), then I instaled CWM and I was trying now install a rom. It seems easy, and I did it last summer in my Geeksphone, but after various errors installing roms copied in externalSD as "installation aborted. Status: 7" I did the step 4 of this tutorial (enter in mounts and format system)and my Sola now only show SONY!!
http://forum.xda-developers.com/showthread.php?t=1960590
"IF COMING FROM SOME OTHER ROM, make factory wipe then go into mounts/storage and format system (not needed if updating AOKP)"
I have tried all I find and I cant restore. I cant enter in CWM, I am flashing with MT27i_relock_bootloader.ftf and Flashtool and phone only show SONY after flash...
Please help
Ty for all
Sorry my bad english
Flash stock ics ftf
Sent from my Ultimate Sola
Ty, I will try
What version plz, .54 or .10?
I am downloading now:
http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf
http://forum.xda-developers.com/showthread.php?t=1914264
Thanks friend
Download. 54
Then flash kernel of. 10
Root via binary method
Flash kernel of. 54
Lucdim said:
Ty, I will try
What version plz, .54 or .10?
I am downloading now:
http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf
http://forum.xda-developers.com/showthread.php?t=1914264
Thanks friend
Click to expand...
Click to collapse
Both are no problem
Sent from my Ultimate Sola
Thanks all, but I think that is the same I am trying with ftf's of this thread:
http://forum.xda-developers.com/showthread.php?t=2029756
But when I flash with Flashtool it seems is all right in Flashtool, but my phone still not run, only shows SONY
I will try with the ftf that are inside the downloads in those threads http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf and http://forum.xda-developers.com/showthread.php?t=1914264 but maybe are the same...
I am desperate
Ty again
Ey, mates, I did! Ty for all again, y restore with Flashboot and MT27_6.1.1.B.1.54_Global.ftf and all my phone was restored.
I have phone again
Thanks!
Lucdim said:
Thanks all, but I think that is the same I am trying with ftf's of this thread:
http://forum.xda-developers.com/showthread.php?t=2029756
But when I flash with Flashtool it seems is all right in Flashtool, but my phone still not run, only shows SONY
I will try with the ftf that are inside the downloads in those threads http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf and http://forum.xda-developers.com/showthread.php?t=1914264 but maybe are the same...
I am desperate
Ty again
Click to expand...
Click to collapse
Dude ! The ftf's in the first link are only the kernel. You just installed a CM9 ROM over a stock kernel, which would explain why it had bootloop ( in your case stuck at Sony ).
Did you flash the CWM in the ROM ( the boot.img in the zip ) or one of the others on the forum? Because those are built on Stock kernel, and this uses CM9 kernel, causing bootloops ( This is just me trying to zero in on the issue )
Solution:
Since that 1st thread had only kernel, the files were ~10Mb. The actual ftf is much larger, around 300 Mb or so, as it contains all files.
Flash one of the other 2 links' ftf's via flashtool and you should be fine.
Lucdim said:
Ey, mates, I did! Ty for all again, y restore with Flashboot and MT27_6.1.1.B.1.54_Global.ftf and all my phone was restored.
I have phone again
Thanks!
Click to expand...
Click to collapse
Congrats
Sent from my Ultimate Sola
U20i Stock ROM ftf 2.1.1.A.0.6
Searched a lot for U20i stock rom ftf but couldn't find it. So created the ftf using PC Companion.
NOTE : ITS ONLY FOR UNLOCKED BOOTLOADER AS I HAVE NOT TESTED IT ON LOCKED BOOTLOADER. SO PLEASE TRY IT AT YOUR OWN RISK ON LOCKED BOOTLOADER
INSTRUCTIONS:
1. Download and install Flashtool and its drivers.
2. Move the file U20i_2.1_2.1.1.A.0.6.ftf to C:\Flashtool\firmware folder.
3. Open flashtool and flash normally. Done :good:
Download Link:
https://www.dropbox.com/s/sijh0v4v8grpmia/U20i_2.1_2.1.1.A.0.6.ftf?dl=0
link is dead
any one got this file ? bricked mu u20i and would be great to flash it back to life
Dahoncho said:
any one got this file ? bricked mu u20i and would be great to flash it back to life
Click to expand...
Click to collapse
Have a look in my stach
https://www.mediafire.com/folder/rjdi2rg1baqb2/Stock+X10+mini+pro
thanx i stuck it into firmware folder but flashtool does not see the file ? updating flashtool just now to latest and will report back
edit :
ftf file does not show up on latest flashtools ? any ideas ?
Dahoncho said:
thanx i stuck it into firmware folder but flashtool does not see the file ? updating flashtool just now to latest and will report back
edit :
ftf file does not show up on latest flashtools ? any ideas ?
Click to expand...
Click to collapse
Place it on the desktop and navigate to it manually, when selecting firmwarefile
Emperor.dk said:
Place it on the desktop and navigate to it manually, when selecting firmwarefile
Click to expand...
Click to collapse
still wont show in flashtools tp flash
using latest ver flashtools
Dahoncho said:
still wont show in flashtools tp flash
using latest ver flashtools
Click to expand...
Click to collapse
Try with ver 0.9.11.0
Emperor.dk said:
Try with ver 0.9.11.0
Click to expand...
Click to collapse
where xcan we find older versions from ? is there a repo for them ?
Dahoncho said:
where xcan we find older versions from ? is there a repo for them ?
Click to expand...
Click to collapse
Be carefull downloading from 3rd party
run virusscan
here is my backup http://www.mediafire.com/file/pkzjo1r363quoif/flashtool-0.9.11.0-windows.exe/file
I have some stock ROMs here, in case the other link dies:
http://mediafire.com/folder/m07tam9mit6jj/X10_Mini_Pro_(U20)
U20i_2.1.1.A.0.6_FR-Generic.ftf
U20i_2.1.1.A.0.6_GK-Generic.ftf
U20i_2.1.1.C.0.0_DE-Generic.ftf
U20i_2.1.1.C.0.0_DE-O2.ftf
I'm not sure what the difference is between A.0.6 and C.0.0, but all are:
Firmware 2.1-update1
Baseband M76XX-TSNCJOLYM-53404015
Kernel 2.6.29
edit// You should have checked https://forum.xda-developers.com/showthread.php?t=1587177 for links to stock ROMs. Lots there, including a link for the original stock ROM, Android 1.6!