So in installed it using rom manager, but whenever i enter it i get an android in a triangle, which i am able to get by, but i dont see any option to back up my current rom.
Welcome to the club, same problem here
Sent from my MB860 using XDA App
Try
http://forum.xda-developers.com/showthread.php?t=1204500
[Unlocked Only][RECOVERY][2011-09-17] Custom CWM-based Recovery 4.0.1.5-atrix3.3
Sent from my MB860 using Tapatalk
you also have to delete the 'install-recovery.sh' file at /system/etc, don't forget that step!
what version of cwm?
One second...... might of jumped the gun here
i'm using 5.0.2.0 installed from Rom Manager. I've never heard of deleteing that file, unless you use Rom Racer.
jake.perkinsr said:
i'm using 5.0.2.0 installed from Rom Manager. I've never heard of deleteing that file, unless you use Rom Racer.
Click to expand...
Click to collapse
I am using rom manager and i dont even get the option of backing up roms...nor the ability to turn off protection on packages ect..
i just tried deleting the install-recovery.sh (rather i renamed it, so i could get it back. And still no cwm after restart? Any other ideas? Did i do something wrong there?
ok...so nothing that you guys suggested works...I have no idea how to get CWM to work fully....now i am stuck with the lame motoblur...yay..
Are you guys 1000% sure you're rooted?
1000%, i have super user app, and i run titanium backup. Everything gets granted root just fine that ask for it.
---------- Post added at 12:39 AM ---------- Previous post was at 12:36 AM ----------
strange thing happened. I deleted Rom Manager application. I redownloaded it. It already detected that i was on latest clockwork recovery 5.0.2.0, but i went ahead and flashed it anyways. I then restarted with volume down. I picked "Android Recovery" and it worked just fine. Booted right into cwm!!!! every subsequent time - it doesn't boot into CWM (it boots into what must be motorola's recovery menu).
Wow! That's so odd! I'm glad you found a way to work it at least once though, even if you have to reinstall Rom Manager every time to work it, hopefully this thread is still on page 1 when the experts wake up!
But that is going to suck if i have to reinstall it everytime to use it. i feel like if I can't get into from startup it would be too risky to put any rom on my phone. If i got into a boot loop or something, it seems like i would be so screwed.
After that file has been removed, reflash CWM and it should work. At least that's what got me going.
That did it. Delete the file then reflashed. Awesome. Thanks Guys!
I'm just a noob, mobileweasel helped the most (too bad i'm limited to 5 thanks a day, it's 1:18am here and i've used them up already )
I haven't even got the phone yet but i'm still trying to learn about it and hopefully, help others along the way too See you around!
Well guys the most i can say on this one is, I had somewhat the same problem my first time around. Except mine said, failed to boot 2 starting rsd mode.
the problem that i was having was that i hadn't unlocked my bootloader, which i found that if you want the most recent rom builds, you need to have an unlocked bootloader. there is a sticky for it in the android development section. still should be first thread. says Pudding.
take a look at that. as i thought i had everything ready to go when i got my atrix. i was wrong but a couple of the atrix guru's got me set straight and working with recovery and roms within ten minutes.
any questions, go ahead and PM me and i will give you what help i can. the atrix was the first device to elude me especially since now instead of tefnars recovery we actually have a full working cwm.
SErooted said:
Well guys the most i can say on this one is, I had somewhat the same problem my first time around. Except mine said, failed to boot 2 starting rsd mode.
the problem that i was having was that i hadn't unlocked my bootloader, which i found that if you want the most recent rom builds, you need to have an unlocked bootloader. there is a sticky for it in the android development section. still should be first thread. says Pudding.
take a look at that. as i thought i had everything ready to go when i got my atrix. i was wrong but a couple of the atrix guru's got me set straight and working with recovery and roms within ten minutes.
any questions, go ahead and PM me and i will give you what help i can. the atrix was the first device to elude me especially since now instead of tefnars recovery we actually have a full working cwm.
Click to expand...
Click to collapse
You sir are awesome! I forgot about the bootloader...cause..well..i guess i am an idiot
thank you very much!
coolnow said:
I'm just a noob, mobileweasel helped the most (too bad i'm limited to 5 thanks a day, it's 1:18am here and i've used them up already )
I haven't even got the phone yet but i'm still trying to learn about it and hopefully, help others along the way too See you around!
Click to expand...
Click to collapse
So for that, I thanked you ! That's what we are all here for anyway. I just happened to be a couple days ahead of you.
Related
Go easy on me guys I tried looking for the answers for the last 3-4 hours. ;/
I already rooted my phone using this guide
http://forum.xda-developers.com/showthread.php?t=1310115
and unlocked the bootloaded as well using the htcdev website.
And I would like to install beastmod. I went through the faq and the whole bit but still have questions and still a tad bit confused. I even went online to google and search the forum.
I know this is the official thread for beast mod
http://forum.xda-developers.com/showthread.php?t=1313017?referrerid=922386
I have unlocked the boot loader, do I need to flash the kernel still? This is where I am confuse.
I read the
"FAQ for the HTC Amaze 4G. Read Frequently Asked Questions before you post a question!"
and
"HTC AMAZE ROM Bible - Everything you need to know"
I'm coming from a Blackberry which I used for almost 6 years.
I'm just kinda stumped right now as far as steps I need to take if any prior to installing Beastmod. I have never installed a rom before but I figure I ask the questions above before attempting anything.
Forgive me if i'm wrong everyone, but i think the Kernel is already cooked into the ROM. So no need for flashing a kernel after flashing the ROM.
I too am new to the HTC Amaze. I'm coming from a Samsung Galaxy S2 and was also running BeastMod v4.0. And God is this a pain in the butt to root. Last HTC phone i had was a HTC TouchPro. WinMo6 ftl
Really? What made you go to the Amaze? I came in T Mobile store thinking I was going to walk out with the S2 but after 3 days I ended up leaving with the Amaze, just seemed like a better phone.
Have you installed beastmod on your phone going?
Oh i still have my SGS2, just got really bored with it dev wise. Too many Roms with pretty much the same things. BeastMod was really the only ROM that stood out. Just got my Amaze last night, so i haven't even been able to try to root it yet. I've been reading alot of tutorials, and it sounds fairly easy....just alot of steps than what i'm used to. But so far, i'm really liking the Amaze over the SGS2. Sense and the camera are a WIN!
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
YES!
You must flash the Kernal with Kernal Flasher
We do not have S-off... Security Off
So Kernals can not be buried in the rom they have to be seperate. We do not anticipate S-off any time soon. Since bootoader is unlocked we can use ADB to push the kernal. VIOLA! for us mere mortals the mighty DEV have created a tool that does it for us!
I just want to help. I find it hard to believe you did not see this in like every Xboarder ROM thread there is! Follow instructions on front page of the ROMs. They are explicit.
Feel free to PM if you have issues though. Amaze is my first Android phone and I cut my teeth with it so I should be a good resource. Cheers
I still do not see that thread, I just looked. I;ve spent a few hours on this but still determined to do it.
nguyendqh said:
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
Click to expand...
Click to collapse
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
babymatteo said:
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
Click to expand...
Click to collapse
How do you think I feel?
Alright so fact, need to flash kernel 1st.
Alright I found this
http://forum.xda-developers.com/showthread.php?t=1328141
Which I assume its the correct one.
I am confused at number 4,
4. Place the boot.img that you want to be flashed in the Kernel-Here folder.
Which boot.img? The one thats included in beastmod?
and 5
5. Make sure adb is enabled on your phone via settings
adb?
You always flash the ROM first then the Kernel.
babymatteo said:
You always flash the ROM first then the Kernel.
Click to expand...
Click to collapse
I don't know what you mean by that could you be more specific please?
Do you see on the BeastMod thread where you downloaded the ROM?
Underneath it, it says "Kernel for 2.2.0" that is the boot.img download it.
As for ADB under settings this is just referring to "USB debugging" turned on.
Put the boot.img in the "Kernel Here" folder which is in the "Kernal Flash Tool v3".
Then after run the flash.bat (windows) or flash.sh(mac) file in that tool folder.
That should do it.
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
F9zSlavik said:
I don't know what you mean by that could you be more specific please?
Click to expand...
Click to collapse
And where are you still having problems?
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
F9zSlavik said:
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
Click to expand...
Click to collapse
The boot.img is the kernel. Flashing it doesn't mean you have BeastMod.
You need to download BeastMod and flash it through recovery to get BeastMod on your phone.
Remember to wipe data, wipe dalvik and wipe cache.
After you flash the ROM then you flash the kernel using the tool.
Sometimes the kernel needs to flashed twice to fix any issues you might have after flashing a ROM and new kernel.
First boot takes longer and after first boot, once the phone settles, reboot again.
Your phone needs to be in "charge only" and not "disk drive" for ADB to recognize it.
do not worry about bricking your phone, you actually cant since there is no s-off yet + htc hasnt released much of the sources so pretty much ur phone is locked and cant brick it.
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
F9zSlavik said:
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
Click to expand...
Click to collapse
Yes. Copy the zip you downloaded on to your sdcard then reboot into recovery.
Volume down + power.
Once in recovery you should have options.
First do a backup.
Then look for the options to wipe data/factory reset.
Then usually wipe cache and wipe dalvik are under the "advanced" option.
I do believe you have a custom recovery so your options might be different.
Navigate around to find the options to wipe all your data.
After you wipe then you navigate to "apply update from sdcard" and then "choose zip from sdcard" select BeastMod and flash it.
You should be ready to go.
Sorry my instructions aren't specific as I haven't rooted my Amaze or flashed a custom ROM.
So I don't know what your recovery looks like.
I am going off my experience with 7 MT4Gs and 2 Sensations.
The steps should be pretty basic when flashing a ROM anyway.
I understand that for someone who is new at this reading the instructions might seem complicated at times.
I'm just trying my best to reword those instructions for you and put it steps you can understand.
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
F9zSlavik said:
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
Click to expand...
Click to collapse
Don't unzip it. Just place the entire thing on your sdcard.
If you're flashing the ROM through recovery you should not need to unzip it.
It's just placing it on your SDcard and flashing it.
ooooh
I will try it right now then.
OK
Off topic question, Cynogen is a mod like Beastmod correct?
UPDATE
Alright its been flashed yay it works lol. Do I need to flash the kernel again? I did it before, do i have to do it afterwards as well, you mention that earlier.
Boy it looks so different...... so the Sense theme is still there but just hidden in some sort of way? Will they ever disable the security on this phone or is that permanent?
Dude if the admin are smart they will PIN this thread. I am a computer guy I fix them for a living mod the etc and damm this was a pain in the ass. The information is there but its missing certain details and its scattered, I searched around and sort of has the jist of it but honestly they should make a faq on how to more or less how its detailed in this thread, would save a lot of time and effort.
This forum is so awesome! lol
This is going to need some getting use to....
Any advice on what to do next? lol Like I said this is the 1st time I've own a phone that is not a blackberry...
This is my very first smartphone as I have been to poor to get one before now. I have Att SGS2. From what i have read i have made a bad decision when doing the factory upgrade to uckk6.
The thing is I want to root the phone, put on custom mods....but I am having a hard time grasping it. I don't want to mess anything up and I dont want to lose my photos and such that are on the phone.
I dont know where to even start.....backup program? or? what all programs or apps i need?
before I upgraded, i downloaded a super1click program and it said it was rooted...then i tried to use the phone and there was soooo much lag in the response time..... i hit the unroot button and tried to use the phone and same thing...restarted phone and it was fine. While it was rooted tho, the damn superuser part asked for money before i could even do anything, that was second reason for unroot and of course thinking i may mess up my phone.
I have tried asking all my friends and to no avail have succeeded in finding anyone that has rooted a phone and/or flashed custom roms.
Like I said in the title, i have been to many different sites even trying to read up and I would rather be safe than sorry. If someone could plz help me out here I would be very grateful.
I am hoping I don't get spazzed at like i seen in a few other posts of other ppl.
And i have seen where someone sent ppl to:
[Heimdall][Odin][Stock][Root]UCKH7/KK6 Return/Unbrick to Stock (or Root
but that doesnt get my foothold on where to start at.
Please don't write me off as a lost cause because I would like to enjoy the benefits of having a rooted phone and custom roms as the rest of you that are intelligent enough to do so. At one point I'm sure you were where i am. I am very eager to learn and can't wait!
While I was writing this i downloaded the Uckk6_stock_rooted.tar.7z not sure if i need it or what though.
Thanks
Follow this guide TO A TEE, and you shouldn't have any problems. It also won't trigger the flash counter so you can take it back for repairs and Samsung won't know you've done anything to it. Use (2C) Entropy's version using windows to root as the others won't work with the OTA update. If you have a MAC, use 2D. Folow the directions EXACTLY how their written. This will get you rooted. Drop down to 3B and again, FOLLOW THE DIRECTIONS EXACTLY HOW THEIR WRITTEN. After this is done, you have a Entropy's kernel with CWM. You can then download any COMPATIBLE rom to your internal SD card and flash the rom with CWM.
To save your pics and such, just hook your phone to your puter via the USB cord and copy/paste, or drag and drop to a file on your computer.
GUIDE
thx again axis01. i sent you a couple pm's with a few more detailed questions also
um.....got past the first part 2c......my wifi doesn't work now????
sorry for spazzing i guess. just trying to learn lol.
my phone wont connect to any wifi, turn it on, few seconds later it shuts itself off....... plz somone help asap! its 5 am now....gonna sleep, hopefully response tomorrow.
thx in advance
help came in later post to wipe. thanks
Did you root with kh7? I see you had kk6 stock. If you went back to kh7 (2.3.4) wifi breaks and have to wipe data. Look at entrophy's thread about it. The return to stock one
Head back over to sticky land... Rooting is the easy part.
http://forum.xda-developers.com/showthread.php?t=1285894
sent from my Galaxy SIII ...haha jk, I FOiLed ya!
I just don't understand why people who can't comprehend the process of rooting or flashing even try. It's not like this phone sucks stock that they just have to mod it to make it workable. None of this is rocket science, but if you don't understand it beforehand then JUST LEAVE YOUR PHONE ALONE! It will be 100 times harder to fix it if you don't know how you messed it up in the first place. It really isn't fair to expect people in here to bail you out when things go wrong because you didn't know what you were doing. The warnings aren't there to keep you from the good stuff. They're there so that you'll think before doing and only do once you understand.
Miami_Son said:
I just don't understand why people who can't comprehend the process of rooting or flashing even try. It's not like this phone sucks stock that they just have to mod it to make it workable. None of this is rocket science, but if you don't understand it beforehand then JUST LEAVE YOUR PHONE ALONE! It will be 100 times harder to fix it if you don't know how you messed it up in the first place. It really isn't fair to expect people in here to bail you out when things go wrong because you didn't know what you were doing. The warnings aren't there to keep you from the good stuff. They're there so that you'll think before doing and only do once you understand.
Click to expand...
Click to collapse
my apologies
Dude stop spazzing out. And don't encourage Miami. Hes helpful but has no patience with this type of stuff. Frankly it was pretty obvious from your first post you were gonna come back with freak out apocalyptic questioning about stuff thats pretty basic.
You did everything in 2c?
Can you still enter download?
Do you have clockwork mod recovery? (Hold all three buttons until you see basic text on your screen... usually like 10 seconds.)
Did you back your contacts up?
Sent from my SGH-I777 using xda premium
Error........
nyamoV2 said:
Did you root with kh7? I see you had kk6 stock. If you went back to kh7 (2.3.4) wifi breaks and have to wipe data. Look at entrophy's thread about it. The return to stock one
Click to expand...
Click to collapse
Thank you for that info. i did the wipe and it restored my wifi. should i update my superuser? for some reason in the market it's showing with an update
I was going to say wipe data but.wanted to be sure you backed your contacts up first.
Dude relax. If it says update, go ahead and update. What's the big deal?
Sent from my SGH-I777 using xda premium
33t said:
Dude stop spazzing out. And don't encourage Miami. Hes helpful but has no patience with this type of stuff. Frankly it was pretty obvious from your first post you were gonna come back with freak out apocalyptic questioning about stuff thats pretty basic.
You did everything in 2c?
Can you still enter download?
Do you have clockwork mod recovery? (Hold all three buttons until you see basic text on your screen... usually like 10 seconds.)
Did you back your contacts up?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I did everything in 2c.
When entering download mode i still get
Odin Mode
Product name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
I do have CWM and i backed up my contact on Kies.
As mentioned now, i have wiped the phone and wifi is working, but have read in forums where ppl have had it stop working again.
In creepyncrawlys guide I didn't read where it said it needed to be wiped?
Thanks
I've read everything in your thread so far and it sounds like everything is fixed. If wifi works and you have root, cwm, and superuser you should be good to go. Go install roms and enjoy. Really doubt your wifi is going anywhere. I'm far from a programmer or anything like that, and from my experience, if you follow the instructions it's hard to **** this phone up beyond repair firmware wise so freaking out is pointless.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
I bought the phone, rooted it and flashed a custom rom all yesterday. I was on KK6 2.3.6. Here is EXACTLY what I did:
Get Odin 1.7 from here:
http://forum.xda-developers.com/showthread.php?t=832827
Get Samsung Kies from here (only way my computer would pick up the phone):
http://mirror10.downloadandroidrom.com/download/Samsung/Kies_2.0.3.11082_152_4.exe?token=512181517
Follow 2c from here:
http://forum.xda-developers.com/showthread.php?t=1311081
Then Step 3A in the same thread.
My phone restarted and I was rooted. My WiFi didn't work. Wiped all data in Clockwork Mod Recovery and I was all set. Then I unlocked my phone (this is optional). Then I flashed a ROM. Easy.
Seems like you're all set if I you did something close to that^
I used ICScrewD (http://forum.xda-developers.com/showthread.php?t=1375255)
Another popular option is UnNamed (http://forum.xda-developers.com/showthread.php?t=1299474)
Kernels:
Entropy DD (http://forum.xda-developers.com/showthread.php?t=1289460)
Siyah (http://forum.xda-developers.com/showthread.php?t=1367800)
croftmx said:
I did everything in 2c.
When entering download mode i still get
Odin Mode
Product name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
I do have CWM and i backed up my contact on Kies.
As mentioned now, i have wiped the phone and wifi is working, but have read in forums where ppl have had it stop working again.
In creepyncrawlys guide I didn't read where it said it needed to be wiped?
Thanks
Click to expand...
Click to collapse
Sounds like you're all set.
Don't use keis for anything. You only needed the drivers. Leave it closed. Figure out another way to get your contacts back.
Sent from my SGH-I777 using xda premium
Croftmx, take the bullets but don't shoot them back while you are in learning curve, you have freedom of writing your comments about others, but i am afraid that may be end of help you seek from many who intend to help.just be kind and get your issues fixed, and move on, pal.
croftmx said:
my apologies
Click to expand...
Click to collapse
I sure wish I'd read the post before you edited it. Hope you got the help you needed.
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here: http://forum.xda-developers.com/showthread.php?t=1362759
Basically:
- Root your device
- Install a custom recovery
- Install the downloaded ROM .zip found in post #3
- Make sure to do a Factory Reset / Wipe before installing ROM
For the record, these steps are out of order. Steps 4 and 3 are switched and I didn't notice till it was to late. What I did next was do the factory reset and then try to re-install the ROM. Everything seemed to go fine until it was time for a reboot. Then it froze on the HTC logo.
Could use some ideas as to what my next move should be. Since it was a previous version of Energy ROM + Faux kernel, phone is definitely rooted, etc. Perhaps I should start over with a stock Gingerbread ROM?
jcllings said:
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here:
...
Perhaps I should start over with a stock Gingerbread ROM?
Click to expand...
Click to collapse
Apparently I am also supposed to flash the kernel as per this thread which I've finally found:
http://forum.xda-developers.com/showthread.php?t=1645641
In order to find it, I had to search for it using Google as this forum software is so haphazard. Also not mentioned in the instructions. Will try this next if I can get at it through just the custom recovery.
Still wrong. Coming from GB and going to ICS you need to flash the ICS RUU in bootloader. I don't know how many times its been mentioned or how many other threads have been started because of this issue.
--------------------------------
It's Better To Fail At Originality
Than To Succeed In Imitation.
--------------------------------
First im not resbonsible for anything that can happen to your phone this what i do if it didnt work im not resbonsible.
If you are rooted via HTCDev S-On Hboot 1.490018 and up you need to Run a command prompt and flash the boot.IMG that comes with the ROM (if not included extract the ROM and search for its in the .Zip file then move that file into a folder in the Root lf ur C Drive put your phone into fastboot mode (remove battery then put it back then press lock/on button and the volume up button at the same time) then connect it to your PC and run command prompt press on start and search for cmd then run it and type the following :
Cd c:\android (or whatever you named the folder)
After that type:
Fastboot flash boot boot.IMG
After its done unplug your phone from ur PC reboot it and it should work perfectly (it may stay at the HTC Logo for 10-20 minutes)
HOPE IT WORKS ENJOY!
Sent from my GT-P7500 using XDA Premium HD app
Double0EK said:
Still wrong. Coming from GB and going to ICS you need to flash the ICS RUU in bootloader.
...
--------------------------------
It's Better To Fail At Originality
Than To Succeed In Imitation.
--------------------------------
Click to expand...
Click to collapse
Awesome. Thanks for the tip. Will see what I can make of it.
I notice that there is a file, PH85IMG.zip in the same directory as the modded ROM. The name isn't very descriptive. Clue?
jcllings said:
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here: http://forum.xda-developers.com/showthread.php?t=1362759
Basically:
- Root your device
- Install a custom recovery
- Install the downloaded ROM .zip found in post #3
- Make sure to do a Factory Reset / Wipe before installing ROM
For the record, these steps are out of order. Steps 4 and 3 are switched and I didn't notice till it was to late. What I did next was do the factory reset and then try to re-install the ROM. Everything seemed to go fine until it was time for a reboot. Then it froze on the HTC logo.
Could use some ideas as to what my next move should be. Since it was a previous version of Energy ROM + Faux kernel, phone is definitely rooted, etc. Perhaps I should start over with a stock Gingerbread ROM?
Click to expand...
Click to collapse
I don't want to put down energy rom, but it hasn't been updated since the original leak, and the instructions were never clarified - he simply never explained the PROPER way to switch from gingerbread to ICS. ARHD gives a better explanation, but I think post #2 in the everything ICS thread gives the best and links to everything you should need..
You have to be careful anytime you are switching to a totally new OS. All the devices I know, switching from 2.1 to 2.2, or 2.2 to 2.3.. or to 4.0+.. it is USUALLY not just a "flash over the old OS".. just something to keep in mind for any of your other or future devices..
yuseiatlas said:
First im not resbonsible for anything that can happen to your phone this what i do if it didnt work im not resbonsible.
...
After its done unplug your phone from ur PC reboot it and it should work perfectly (it may stay at the HTC Logo for 10-20 minutes)
HOPE IT WORKS ENJOY!
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
I'm trying to get RUU now. When I tried the above earlier, got as far as the wirly Energy rings though but then it restarts.
Silentbtdeadly said:
I don't want to put down energy rom, but it ...
other or future devices..
Click to expand...
Click to collapse
Well as far as I know, it ain't like he is getting paid much so it would seem to be a miracle if any of this stuff gets updated. ;-) If I don't have this figured out by Tuesday, I'll use it as an excuse to get a new phone. This one has a crack or two in the screen anyways.
Still, even so I would MUCH rather get this one working again. 'specially since I'm between software gigs & cash is tight. If Energy ROM hasn't been updated and there's a better and/or more complete set of instructions maybe I should be looking at something else. Will continue hunting through these forums for info but can use all the help I can get since this forum software ain't exactly friendly. Probably best to see if I can get it back to stock on ICS and then work forward from there. Having said that, I have an RUU that I am working with, its: PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip
Tried just flashing it but apparently there's more to it than that.
Latest problem is that I can't get it re-locked without enabling USB debugging. Can't do this since I don't have a working OS. Can it be done from CLI or recovery?
Uh.... hmmm... mysterious. Seems to have fixed itself. Will try a restart and see what happens.
jcllings said:
Latest problem is that I can't get it re-locked without enabling USB debugging. Can't do this since I don't have a working OS. Can it be done from CLI or recovery?
Uh.... hmmm... mysterious. Seems to have fixed itself. Will try a restart and see what happens.
Click to expand...
Click to collapse
I was saying that there are some other options, other roms, that have better instructions and have been updated fairly well.. that is all.
The thread I was talking about by glacierguy is here - it links to tons of resources and should answer most questions you may come up with. For example it has "Relock phone (fastboot oem lock)" you can issue fastboot commands while your phone is booted into the bootloader - so this has nothing to do with usb debugging..
There is tons of information here, I know it isn't absolutely organized, but there are a lot of guys here who tried to make the information as easy to find as possible..
Did u try to restart it again it usually takes a couple of times but anyway should either return to stock or use the RUU for the ICS ROM
Sent from my GT-P7500 using XDA Premium HD app
jcllings said:
Well as far as I know, it ain't like he is getting paid much so it would seem to be a miracle if any of this stuff gets updated. ;-) If I don't have this figured out by Tuesday, I'll use it as an excuse to get a new phone. This one has a crack or two in the screen anyways.
Still, even so I would MUCH rather get this one working again. 'specially since I'm between software gigs & cash is tight. If Energy ROM hasn't been updated and there's a better and/or more complete set of instructions maybe I should be looking at something else. Will continue hunting through these forums for info but can use all the help I can get since this forum software ain't exactly friendly. Probably best to see if I can get it back to stock on ICS and then work forward from there. Having said that, I have an RUU that I am working with, its: PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip
Tried just flashing it but apparently there's more to it than that.
Click to expand...
Click to collapse
If you're.gonna flash that last file you mentioned, you need to rename it to PH85IMG, since its a stock ruu and not just a flashable Rom.
Sent from an Amaaaaaazing place :-D
Woohoo! I've succeeded in getting the aforementioned RUU installed. Should be much less of a problem from here forward.
yuseiatlas said:
First im not resbonsible for anything that can
...
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Of course you are responsible. Heaven forbid anyone should take responsibility for their own actions or anything crazy like that.
Since English may not be your first language, I'll be clear. I'm just kidding.
Silentbtdeadly said:
I don't want to put down energy rom, but it hasn't been updated since the original leak, and the instructions were never ...
other or future devices..
Click to expand...
Click to collapse
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
jcllings said:
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
Click to expand...
Click to collapse
Whoops, you covered this earlier. Will chase down the link and see where it goes.
jcllings said:
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
Click to expand...
Click to collapse
If you want cutting edge(these both have features no other rom has added yet, and are very current update wise) and like the senseui, try remix's http://forum.xda-developers.com/showthread.php?t=1673609 or if you want with less sense and more of an aosp-ish feel go for his http://forum.xda-developers.com/showthread.php?t=1623184
ARHD is what is being used for the base for many roms because it is solid and bugless, energy has more features that he had included in his gingerbread rom.. I've heard good things about capromce, but I have no idea what features he has added that are or aren't included in the others..
Heheheh and its not my first language thats why you might see a lot of grammar and/or writen mistakes, just for the futur before you flash any new ROM Back-Up you current or the original ROM just in case something like this happen so you can restsore it without worrying and hope i helped
Sent from my GT-P7500 using XDA Premium HD app
Righteous! Up and running on Speed ROM 4.0. Thanks so much to everyone who collaborated. Copious mashing of the Thanks button.
I have been trying since yesterday evening to install the CM9 nightly build. I've read through every single post in the thread ( http://forum.xda-developers.com/showthread.php?t=1778170 ) and I still can't seem to do it. I've flashed a few ROMs in the past with no issues, but for some reason this one is not making any sense. Maybe it's a good thing because I've learned so much and had my heart drop a few times thinking my phone is ruined. My issue seems to be with my version of CWM I guess? The first step of the instructions says to: 1. Install ClockworkMod Recovery for "quincyatt".
I don't understand this. I click on the link in the thread and the CWM file is a .img file, so I don't understand how to flash it to my phone. I've downloaded ROM manager (and paid for the premium version) and flashed the newest version through there. When I do that, it completely messes up CWM and keeps giving me errors anytime I try to install any ROM. It freezes on most things I do, keeps giving cache errors, etc. It seems like there's an issue with flashing the newest version through ROM manager. So how do I get CM9 on my phone? Do I need to update CWM someway? I currently have the version in the CWM thread ( http://forum.xda-developers.com/showthread.php?t=1584576 ) with the latest release 04-14. If someone can please give me an explanation for what I'm missing here, that would help greatly. I've been on this forum for a few years and always read and search. I actually just made my first post yesterday to help someone when I was encountering the same issue with CWM that they were and finally figured it out after hours of reading.
THANK YOU!
jaxjonesdrew32 said:
I have been trying since yesterday evening to install the CM9 nightly build. I've read through every single post in the thread ( http://forum.xda-developers.com/showthread.php?t=1778170 ) and I still can't seem to do it. I've flashed a few ROMs in the past with no issues, but for some reason this one is not making any sense. Maybe it's a good thing because I've learned so much and had my heart drop a few times thinking my phone is ruined. My issue seems to be with my version of CWM I guess? The first step of the instructions says to: 1. Install ClockworkMod Recovery for "quincyatt".
I don't understand this. I click on the link in the thread and the CWM file is a .img file, so I don't understand how to flash it to my phone. I've downloaded ROM manager (and paid for the premium version) and flashed the newest version through there. When I do that, it completely messes up CWM and keeps giving me errors anytime I try to install any ROM. It freezes on most things I do, keeps giving cache errors, etc. It seems like there's an issue with flashing the newest version through ROM manager. So how do I get CM9 on my phone? Do I need to update CWM someway? I currently have the version in the CWM thread ( http://forum.xda-developers.com/showthread.php?t=1584576 ) with the latest release 04-14. If someone can please give me an explanation for what I'm missing here, that would help greatly. I've been on this forum for a few years and always read and search. I actually just made my first post yesterday to help someone when I was encountering the same issue with CWM that they were and finally figured it out after hours of reading.
THANK YOU!
Click to expand...
Click to collapse
Try using TWRP recovery. I believe it flashes successfully.
http://forum.xda-developers.com/showthread.php?t=1647575
It is a zip not a. Img i just clicked it myself. Dont use the stock browser. Download dolphon browser hd. And click the link. The zip file you download is there. Flash it in cwm recovery. Easy easy stuff.
Download rom manager from the market. From within the app you can install CWM. This is what the post means.
Oops, sorry didn't read your whole post at first.
I had the same problem. What I did to fix it was purchase the touch recovery upgrade from within rom manager and that fixed my problems. If you have $2 to spare give it a shot. Good luck!
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for the replies. I finally got it to work with TWRP. Now of course when it loads up everywhere I click I get an error saying 'Unfortunately, the process android.process.acore has stopped. :laugh: Here we go again.
Do what i said in my post above. Make sure to wipe data cache and dalvik cache in CWM recovery. Or dont listen and continue to enjoy the issues. Also dont use rom manager. Its more problems then its worth. Good luck
Thank you, I appreciate your help. Well I figured out how to get that error to stop. Now just need to figure out how to get all my contacts on here that were only saved on my SIM and I'll be good to go. This was a really good learning experience. I'm really liking TWRP
Do yourself a favor and put all contacts on your Gmail account. You can enter them on a PC quickly. Just be sure to always select your Gmail account to sync.
Another option is to use Titanium Back Up and restore the contacts once moving to a new ROM.
Sent from my SAMSUNG-SGH-I717 using xda premium
Big Dawg 23 said:
Do yourself a favor and put all contacts on your Gmail account. You can enter them on a PC quickly. Just be sure to always select your Gmail account to sync.
Another option is to use Titanium Back Up and restore the contacts once moving to a new ROM.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Thanks, I synced them all to Gmail. Much faster now! Finally got it all up and running. Just a question about using the 'touch key notification lights' Does this kill the battery? It seems like it stays on until you read your text, so if you get one while asleep those lights just stay on?
Use bln app from market and uncheck in system settings. You can set that to turn off whenever you'd like
froidroid said:
Use bln app from market and uncheck in system settings. You can set that to turn off whenever you'd like
Click to expand...
Click to collapse
awesome app!! bought the paid version. thanks man!
silver03wrx said:
It is a zip not a. Img i just clicked it myself.
Click to expand...
Click to collapse
Some of the links are .zip files and some are .img files.
Yes I have searched, yes I have tried google and yes I am still stuck...
I *think* I have tried just about everything and I have read through about 10 "soft brick" or "stuck on samsung screen after rooting on stock ICS" (and most combinations of) but nothing is working. I'm sure it's probably an easy fix but I just can't seem to get anywhere. Here's what happened.....
I googled rooting galaxy not after ICS update and found this http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
It was all I could find about rooting after the ICS OTA update, so I did it. Everything seemed fine. I had CW but no superuser so I DL it from the market as well as my old Titanium pro from back when I rooted my HTC. I rebooted my phone to get it all settled in and decided to run Titanium and get this party started. I got an error message that busybox was not installed so.... I installed it but when I clicked the app on my phone it said it would not install because I didn't have root access.... This is where the confusion starts to set in.
So I restarted to see if I could get into CW but when I rebooted the soft brick started.... I was stuck at the "samsung" screen.
I IMMEDIATELY ran to XDA and began my search. I can still get to DL mode, Odin and CW so I know there is hope. I tried the files listed in the "All in one guide for noobs" and the "Galaxy Note Super Everything Thread (I717)".
There was a suggestion to use Kies but when I put in my serial # and model name i get the "galaxy note does not support initializing" message.
I'm not new to flashing/rooting, although things are a bit different, I have a basic understanding of the process but I ain't no Einstein either...
I also tried to flash the stock Telus ICS rom but I got an error message and my lil droid guy went belly up....
Any help would be greatly appreciated! I love my note and this is killing me...
I have to go to work so if I don't reply immediately its because I have no email access at work.... Especially without my Note....
The steps are correct in the link you gave.
Did Odin3 say success?
Did you get CWM installed?
Did you flash superuser?
Is there a superuser icon in your apps?
Ranger is on it....
I'm thinking we dont have CWM on the device....????
And no SU flash, from within the recovery that doesnt exist....g
He has cwm, he did not flash superuser, Looks like he assumed flashing cwm would automatically root him.
Since you can get into recovery... i would just go ahead and download a Rom zip, transfer to phone by mounting in cwm (mounts and storage if you didn't know) and flash that sumbitch
Oh yep...found that.......Thanks brother....g
That means do or redo steps 13 to 16 in the guide you posted.
agreed....g
im back...
Just got in, thanks for the replies.
Yes I have CWM and can access it. I have tried to flash the CM roms as well as the stock telus ICS rom but was denied at install. I got a "assert failed getprop (ro.build.device)" message and 2 other "ro." error messages when I install the cm nightly quincyatt rom.
rangercaptain said:
The steps are correct in the link you gave.
Did Odin3 say success? Yes
Did you get CWM installed? Yes
Did you flash superuser? Yes
Is there a superuser icon in your apps?
Click to expand...
Click to collapse
Cant see my apps but when I first flashed CWM and was able to see my screen there was a SU app on my home screen because I DLed it from the market.
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
I thought I was on the latest. Someone else suggested that also, so I flashed the touch CWM Updated 04/14
rangercaptain said:
You need to update your CWM. Get it here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look right under the big green arrow in the first post of the thread.
Readreadread. Then thankbigjoethankbigjoe.
Of course, come back here if further assistance is needed or you solve the issue.
Click to expand...
Click to collapse
Yup, thats the one I flashed, its working and I get a successful message when I flashed SU so I assume its there also. Any recommendations of a rom to try and flash? Still hanging at the samsung screen.....
I appreciate the help by the way, I know how frustrating it can be to try and help with tech situations from emails and messages (Hi Mom ).
Thanks has been pushed....
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
rangercaptain said:
That assert error is in the script used by CWM to flash and it is saying 'wrong rom for your device'. So for sure you have the correct CWM and rom for your phone? Just checking because errors at this point make your phone useless.
Click to expand...
Click to collapse
I got my CWM from the link you posted but the rom I am iffy about. Any suggestions for a rom to try and flash? something stable?
EDIT: going to try and flash this rom and modem http://forum.xda-developers.com/showthread.php?t=1801689
Downloading now..... Sloooooowly. lol
Holy McCrappy dance!
Okay... so I flashed the stock ATT with odin. just at start screen now.... Don't think it is rooted so now.... How do I get back to telus and root right the first time?
Edit: so it appears the ATT rom was a GB ver so I am assuming that I was somehow reverted to GB instead of my stock ICS. Now to try and flash a stock Telus GB rom, update then try to root.... AGAIN! Thank gawd I don't have a $600 paperweight now!
Thanks everyone
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
^^^ what ranger said. No point in repeating trust and go!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rangercaptain said:
I recommend this rom:
http://forum.xda-developers.com/showthread.php?t=1766933
Select the pure stock. There is no point in using the Telus rom.
Please read carefully. Good luck.
Click to expand...
Click to collapse
I would like my ota ICS back but I guess no bother huh? I am back on the stock telus GB and for some reason it wont let me update to ICS anyway.... LOL
Might as well root it up and go go go!
Thanks again Ranger.
WOW! that pure stock is a big ole file! lol
Ok, take it easy for a few days. Just read up and, now that you've survived the worst scenerio, you might want to try a more custom rom or other modifications. Pretty soon you will be pulling someone else's a$$ out of the fire. Good luck.
I think I'm okay now. Was a skeerty one though. Lol