Is there anyway around the droid activation screen. I have tried the touching the screen in the corners per the directions and have tried *#837 number with out any luck. Im just trying to get back to my recovery to get rid of remix since I cant get passed the backup assistant.
Thanks
NO J.O.B. said:
Is there anyway around the droid activation screen. I have tried the touching the screen in the corners per the directions and have tried *#837 number with out any luck. Im just trying to get back to my recovery to get rid of remix since I cant get passed the backup assistant.
Thanks
Click to expand...
Click to collapse
been answered in the eclipse thread
just hold the search button and use the voiice command to get to the market download a file manager and install the recovery from there
NO J.O.B. said:
Is there anyway around the droid activation screen. I have tried the touching the screen in the corners per the directions and have tried *#837 number with out any luck. Im just trying to get back to my recovery to get rid of remix since I cant get passed the backup assistant.
Thanks
Click to expand...
Click to collapse
*#837??? Use *228 or *22899... That should get you activated, and I also think you have to touch the android not the corners...??
NO J.O.B. said:
Is there anyway around the droid activation screen. I have tried the touching the screen in the corners per the directions and have tried *#837 number with out any luck. Im just trying to get back to my recovery to get rid of remix since I cant get passed the backup assistant.
Thanks
Click to expand...
Click to collapse
WHEN YOU FEEL A THE VIBRATE WHEN BOOTING START TAPPING THE CENTER OF THE PHONE, until you see a little android, if the android is there and you see a triangle on the top you failed
Related
There are ways to bypass the phone activation? Please help me! Thank you
Phone activation for a long time did not respond, because I use China Telecom SIM.
I found HTCSetupWizard.apk contains the phone activation.
HTCSetupWizard.apk there are ways to modify it?
rockeryang said:
There are ways to bypass the phone activation? Please help me! Thank you
Phone activation for a long time did not respond, because I use China Telecom SIM.
I found HTCSetupWizard.apk contains the phone activation.
HTCSetupWizard.apk there are ways to modify it?
Click to expand...
Click to collapse
If you can gain root access through ADB then you might be able to go in there and delete the apk itself... But thats a bit beyond my knowledge so I'm hesitant to give you that as an option...
On the droid you could bypass the activation by pressing all for corners of the screen in the correct order. Not sure if it's the same on the thunderbolt.
Sent from my ADR6400L using Tapatalk
I deleted the HTCSetupWizard.apk. But the manual setting is not perfect. If this is the only other way now. Droid can bypass! Thunderbolt is no way?
rockeryang said:
I deleted the HTCSetupWizard.apk. But the manual setting is not perfect. If this is the only other way now. Droid can bypass! Thunderbolt is no way?
Click to expand...
Click to collapse
If the Droid method did not work then no, not to my knowledge, but someone else may know of a way!
Thank you! Look forward to the emergence of the master!
rockeryang said:
Thank you! Look forward to the emergence of the master!
Click to expand...
Click to collapse
Haha! You'll know when he's emerged when the smell of Gingerbread floats through the air and into your Thunderbolt
The tbolt uses sense for initial setup as opposed to the stock android setup, if you can find a bypass method for another htc phone, chances are that it will work on the tbolt.
Sent from my Thunderbolt using Tapatalk
The bypass method I think you are referring to goes like this.
When you first boot and see the android saying touch me to begin, tap all 4 corners of the screen, starting at the top left and going clockwise. It usually takes me a couple tries to hit all the right spots.
Sent from my ADR6400L using Tapatalk
People there is NO ANDROID saying click me on a factory fresh THUNDERBOLT.... So that TAP 4 corners thing will not work!!!
It takes you right to CHOOSE LANGUAGE LIST and then after you choose it HANGS on activation screen FOREVER...
I make these work on Pageplus but I reset one and now cannot get past the stupid activation screen! God I hate Verizon and all these other carriers making life miserable if you dont pay their high prices..haha
There HAS TO BE a way to bypass this thing, theres not a phone yet that you cannot bypass activation...
ANYONE???
If I find out I will post here IF I DONT THROW THIS STUPID PHONE FIRST!!..lol
Its probably not the solution you are looking for, but if you root / load an AOSP rom (cm7, omgb, etc), you have the default android setup and should be able to bypass screen. If you have to have sense, then I'm not sure. Then again, i'm assuming you already have USB debugging activated, which might not be the case. Just some thoughts that might help.
if your phone is already rooted w/ enabled with debugging (example:custom rom) or hold the search button and say application settings and enable debugging
then use android commander and rename that apk to .bak
that's what worked for me
how to BYPASS htc 6400
the only way is that you bypass is by press the next after the language selected it goes to activating screen than you press search button that will take you back to emergency option now press emergency and dail ##7764726 that should take you to input SPC codes which is 6 ZERO's as you know this lol . go toNAM-general and program like you always do . done and dont get mad be glad and eveything comes together ok bro hahahahah enjoy[/RIGHT]
ownmart said:
if your phone is already rooted w/ enabled with debugging (example:custom rom) or hold the search button and say application settings and enable debugging
then use android commander and rename that apk to .bak
that's what worked for me
Click to expand...
Click to collapse
---------- Post added at 03:24 PM ---------- Previous post was at 03:01 PM ----------
i can get you to the programming screen from the emergency dail option all you do is dail ##7764726 hit call button and put 6 zeros and from there select nam general settings or whatever you want ok now i gave you i way in and now lol i need you to give me the settings to put on pageplus . i know how but is that to tether from programing screen only or it need custom ROM ? let me know please
jstubblefield said:
People there is NO ANDROID saying click me on a factory fresh THUNDERBOLT.... So that TAP 4 corners thing will not work!!!
It takes you right to CHOOSE LANGUAGE LIST and then after you choose it HANGS on activation screen FOREVER...
I make these work on Pageplus but I reset one and now cannot get past the stupid activation screen! God I hate Verizon and all these other carriers making life miserable if you dont pay their high prices..haha
There HAS TO BE a way to bypass this thing, theres not a phone yet that you cannot bypass activation...
ANYONE???
If I find out I will post here IF I DONT THROW THIS STUPID PHONE FIRST!!..lol
Click to expand...
Click to collapse
I you activate on pageplus you wont get data. I got my thunderbolt from a guy that found that out the hard way.
Sent from my ADR6400L using Tapatalk 2
Thunderbolt bypass
Simply pull out the sim card and reboot.
htc setup wizard will start follow direction and skip sim section.
Thats all activated....afterwards replace sim card
this is my 1st post ever....hope it was useful
mandip69
Mandip69 said:
Simply pull out the sim card and reboot.
htc setup wizard will start follow direction and skip sim section.
Thats all activated....afterwards replace sim card
this is my 1st post ever....hope it was useful
mandip69
Click to expand...
Click to collapse
your the only 1 post make me want to ROFL ma self until die lol lol.
this way awesomely worked.
i remember 1 year ago i didnt stuck my lol non vzw sim card on sim slot :silly:
Im trying to root my tablet WITHOUT activating it through the simcard and i cannot figure out how to do it I was wondering if anyone else found a way to bypass the stupid SIM activation. I followed the steps on GALAXYTABHACKS.COM and i CANNOT go into recovery to install the zip file the screen just gives me the green android guy for software downloading and the other icon with the android logo and the white box. the tab conects to wifi fine through the settings and im able to download apps though the market and open them only through the market since i cant see the home screen at all. I managed to download the ZIP file into the sd card via dropbox but im just stuck now.
I wanna either bypass the stupid activation or root it then activate it later.
anyone? I'd appreciate the help. Any time of help lol
Did you select the Android + box? That's what you have to do. Follow the instructions here: http://www.fun47.com/verizon-4g-lte-samsung-galaxy-tab-rooted/
yea it keeps saying error 401 on the link when i go to the site. and when i click on the android + icon nothing happens just a blank screen
Hmmm, strange, the site works. Did you try to access it from your Tab or from a computer?
Sent from my PG86100 using XDA App
When the tablet ask the activation, just tape on the screen on each corner (up-left, up-right, down-left, down-right) and volume down (the right button in volume) and you're tablet will pass the activation.
I've done it on my own tablet and it works perfectly. If you need more help, I remain at your disposal.
Sincerely,
Avalon
djavalon said:
When the tablet ask the activation, just tape on the screen on each corner (up-left, up-right, down-left, down-right) and volume down (the right button in volume) and you're tablet will pass the activation.
I've done it on my own tablet and it works perfectly. If you need more help, I remain at your disposal.
Sincerely,
Avalon
Click to expand...
Click to collapse
tape on the screen on each corner together or just one by one ?
can u record a video for proof
i tried same u say many time but cant ( today 4G galaxy tap 10.1 verizon
bypassing 4g
Tap on the corner of the tablet in this order when it boots up
top left
top right
bottom left
bottom right
I am recalling from memory
for the final step
after above procedure
hit power or
hit vol up or
hit vol down
This means you will have to do this at least 2 more times that usual but, one of these sequences will work.
This will then bypass the 4g setup and go into wifi setup for the initial setup of the tab....
Hello, I’m having this same issue. I factory reset the tablet, and I keep getting an error message. It says “SIM Initialization error” a SIM card is needed to operate this tablet. Please turn off your tablet and insert your SIM card.” I do not have a SIM card, and would like to use the device with wifi instead. I have been unable to get the trick with touching the corners of the screen to work. Is there another way to bypass this screen? Or can someone post a video showing me how to do it right?
Hello everyone i hope someone can help me. I rooted my Kindle Fire HDX using KFHDX Tool Kit and it was successful. Afterwards i installed SUPERSU by way of the program itself and also disabled OTA. Now my problem happened after disabling OTA my silk browser will not work at all even though the WIFI is connected so i did a factory reset now when i power on my unit it keeps prompting me to choose a language even though i have already chosen one it will just keep going back to that screen. I was able to bypass it by tapping quickly on the screen and i was able to go to contacts and from there i am able to go to settings via the drop down menu. The problem is i cannot access home because when i press back it will just show home for a split second and then go back to the language menu even if i tried all the languages it wont let me use the tablet. Also i remember having paused the update before attempting to root. Now i cannot proceed to use my tablet at all. Can someone help me out with my predicament? I would really appreciate it, Thank you.
momayhem03 said:
Hello everyone i hope someone can help me. I rooted my Kindle Fire HDX using KFHDX Tool Kit and it was successful. Afterwards i installed SUPERSU by way of the program itself and also disabled OTA. Now my problem happened after disabling OTA my silk browser will not work at all even though the WIFI is connected so i did a factory reset now when i power on my unit it keeps prompting me to choose a language even though i have already chosen one it will just keep going back to that screen. I was able to bypass it by tapping quickly on the screen and i was able to go to contacts and from there i am able to go to settings via the drop down menu. The problem is i cannot access home because when i press back it will just show home for a split second and then go back to the language menu even if i tried all the languages it wont let me use the tablet. Also i remember having paused the update before attempting to root. Now i cannot proceed to use my tablet at all. Can someone help me out with my predicament? I would really appreciate it, Thank you.
Click to expand...
Click to collapse
Happened to me as well, you need to get supersu installed and it'll stop doing it.
derpadoodle said:
Happened to me as well, you need to get supersu installed and it'll stop doing it.
Click to expand...
Click to collapse
Hi derpadoodle. I was also able to fix it by doing another factory reset and redoing superSU and OTA. Was able to install es file explorer via third party website and the Gapps. Almost thought that its already dead just bought it 3 days ago..
Im having another problem sometimes when i turn on my wifi my unit reboots itself.. It has happened a couple of times already.. any solution to this?
momayhem03 said:
Hello everyone i hope someone can help me. I rooted my Kindle Fire HDX using KFHDX Tool Kit and it was successful. Afterwards i installed SUPERSU by way of the program itself and also disabled OTA. Now my problem happened after disabling OTA my silk browser will not work at all even though the WIFI is connected so i did a factory reset now when i power on my unit it keeps prompting me to choose a language even though i have already chosen one it will just keep going back to that screen. I was able to bypass it by tapping quickly on the screen and i was able to go to contacts and from there i am able to go to settings via the drop down menu. The problem is i cannot access home because when i press back it will just show home for a split second and then go back to the language menu even if i tried all the languages it wont let me use the tablet. Also i remember having paused the update before attempting to root. Now i cannot proceed to use my tablet at all. Can someone help me out with my predicament? I would really appreciate it, Thank you.
Click to expand...
Click to collapse
Go back to root tool. Enable ota updates. Register tablet. Disable ota. It keeps going to language because it can not contact amazon to set up. This exact thing happened to me. That's how I fixed it
conan1600 said:
Go back to root tool. Enable ota updates. Register tablet. Disable ota. It keeps going to language because it can not contact amazon to set up. This exact thing happened to me. That's how I fixed it
Click to expand...
Click to collapse
Thanks. I was able to fix it by resetting to factory settings, registering and then doing everything again. Do you know of any solutions to the wifi problem where when you turn on the wifi the unit reboots?
try this
momayhem03 said:
... Do you know of any solutions to the wifi problem where when you turn on the wifi the unit reboots?
Click to expand...
Click to collapse
posted by Hashcode somewhere in development section
...If you try and start Wifi and the device crashes/reboots, try turning on bluetooth prior to enabling wifi and see if that works...
hope it will work for you :good:
jeryll said:
posted by Hashcode somewhere in development section
...If you try and start Wifi and the device crashes/reboots, try turning on bluetooth prior to enabling wifi and see if that works...
hope it will work for you :good:
Click to expand...
Click to collapse
Thanks bro! I also seem to see that when my unit turns on the bluetooth icon appears beside the wifi indicator but when i go to settings > wireless and i check my bluetooth it is turned off LOL. Needed to turn it on and off for the icon to disappear. Anyways did the updates ever solved this problem? not really a biggie for me but it is nice if i can turn off my wifi.
Hello
I am having a problem with my screen capture. I've took it to best buy and they tried everything but factory reset. I have a Sprint note 3 and ever since the software update I cannot screen shot for nothing. Can someone please help?
bigbankhank05 said:
Hello
I am having a problem with my screen capture. I've took it to best buy and they tried everything but factory reset. I have a Sprint note 3 and ever since the software update I cannot screen shot for nothing. Can someone please help?
Click to expand...
Click to collapse
Palm Swipe worked for me
same problem. nothing is working.
Kchitown1977 said:
Palm Swipe worked for me
Click to expand...
Click to collapse
Im having the same problem. I emailed samsung about it and they emailed me back with a bunch of instructions on how to update the security. I followed the instructions then tried to screenshot and the same message popped up. Palm swipe wont even let me activate it. The pin doesnt work. And holding the power button and the home button doesnt work either.
I have a stock LG Power. I recently factory reset my phone. After I finished the initial setup, my home and recent app buttons didn't work, and my notification bar wouldn't pull down. I researched it a little and found out that the reason was because the phone was still stuck in setup mode. So I force closed the Lgsetup, and everything worked except the home button. So, I rebooted the phone. Now it just brings up the setup every time the phone reboots. Everything is still entered, I don't have to do anything other than hit next. I don't know what else to do, help?
Did you ever get any help
vanishedsarah said:
I have a stock LG Power. I recently factory reset my phone. After I finished the initial setup, my home and recent app buttons didn't work, and my notification bar wouldn't pull down. I researched it a little and found out that the reason was because the phone was still stuck in setup mode. So I force closed the Lgsetup, and everything worked except the home button. So, I rebooted the phone. Now it just brings up the setup every time the phone reboots. Everything is still entered, I don't have to do anything other than hit next. I don't know what else to do, help?
Click to expand...
Click to collapse
I have the same problem and have not gotten any help. Did you ever get a reply to hrlp you fix this problem?
Mman1000 said:
I have the same problem and have not gotten any help. Did you ever get a reply to hrlp you fix this problem?
Click to expand...
Click to collapse
No, I didnt, sorry. I ended up just upgrading my device
vanishedsarah said:
No, I didnt, sorry. I ended up just upgrading my device
Click to expand...
Click to collapse
Me too lol
vanishedsarah said:
vanishedsarah said:
No, I didnt, sorry. I ended up just upgrading my device
Click to expand...
Click to collapse
Me too lol
Click to expand...
Click to collapse
lol.. You should add [SOLVED] to the thread's title...
:good: