Hello all,
Okk,actually story starts from the day custom kernels are released.Here we go:
I was on wb v4 when actually doom released his custom kernels,he had two versions X/S AND FS Series.First i tried x/s series kernel and was stuck on XPERIA logo.Then,i tried FS Series it worked but cant overclock.. then i came to know that coz of some files in the ROM,u cant install x/s series untill u delete those files.
Then,WB released v5,again first i tried custom version but then also i was stuck on xperia logo.Then,i tried stock version it worked but u cant overclock.I decided to retain on stock version for some time.
Then WB released v6,now i tried gaming ROM first but guess what? I was again stuck on xperia logo.I flashed Doom's fs kernel then the ROM worked but u cant overclock.
WHENEVER I FLASHED ANY CUSTOM KERNEL OR CUSTOM ROM WITH THE CUSTOM KERNEL I WAS STUCK ON XPERIA LOGO....
I am not able to boot wb's gaming rom,always stuck on xperia logo.
Need help...
P.S. BOOTLOADER UNLOCKED.
EDIT 1:
Noticed one thing when i flashed doom's kernel v4b, it doesn't vibrate when u power it ON.
But with FS kernel it does...argh!! what the hell!!
Sent from my X10i using Tapatalk
The fact that you can install ROMs means that you have xrecovery installed and rooted 2.3.3. So my only advice would be to make sure your on the right baseband .71 and the original stock kernel. Then install wolf gaming rom. If you still can't boot up...then start from a completely clean 2.3.3 GB STOCK ROM and try over again. OR your phone is serious and cannot handle any OC or UC or UV or OV and that is possible since other users have similar issues.
nice username. By the way ZEUS raped his sister.
bharadwaj1991 said:
The fact that you can install ROMs means that you have xrecovery installed and rooted 2.3.3. So my only advice would be to make sure your on the right baseband .71 and the original stock kernel. Then install wolf gaming rom. If you still can't boot up...then start from a completely clean 2.3.3 GB STOCK ROM and try over again. OR your phone is serious and cannot handle any OC or UC or UV or OV and that is possible since other users have similar issues.
nice username. By the way ZEUS raped his sister.
Click to expand...
Click to collapse
trying now!!
w8!
Noticed one thing when i flashed doom's kernel v4b, it doesn't vibrate when u power it ON.
But with FS kernel it does...argh!! what the hell!!
P.S i tried repairing it with SEUS it does repaired, i rooted it, then intalled xrecovery, then cleanly installed WB's Gaming ROM and again stuck on Xperia logo...
anyone who can help me here..??
bump!
How does it behave after flashing SE kernel (repair with SEUS or FT)? Did you boot and test before rooting again?
Karl
Related
This morning I woke up and as I entered the XDA routine to look for a new ROM for my WT19a based firmware .58. I found this HYBROM v17
changed the kernel that is using the kernel itself kamarush very good I recommend to everyone and it is not stable and already spent battery is an ICS alpha. I decided to switch to GB because I was thinking of games as the OS is lighter so I can have more Hz observed for the Games. Ai gave me a Kernel not know where I'm just in Boot img. Do not know which kernel is said that he worked in the cell that is based on .62 firmware. I did everything right as in Tutorial #http://forum.xda-developers.com/showthread.php?t=1373435But I was stuck in the screen just did several times and always restarts the machine. Thank God and Backup ClockworkMod restaruar achieve my original kernel. Soon after the Advanced Backup to start the phone again. At first did not recognize most USB cable into fastboot mode or mode mass is nothing in debug mode only after a disconnected and connected the USB device works again. I wonder if applying a Kernel difirente ROM for your application. Aver can brick. Because I could not install: Confuso:
in boof rom the firmware using is .62 not 58.. the kernel using this to work is xkernel, rage and boofkernel ..
RAGE Kernel v2.8
delmarz said:
in boof rom the firmware using is .62 not 58.. the kernel using this to work is xkernel, rage and boofkernel ..
Click to expand...
Click to collapse
According to the RAGE was vendor Kernel v2.8. Because this Rage Kernel v2.8 would not have to run? Rage Kernel v2.8 ROM does not run on 58? Because before when I was using kernel kamarush MiniSanduwich and everything worked perfect. Someone tell me a kernel itself wrong in a ROM which defects that generates them.
Now I'm too afraid to apply a different kernel and not return it to flow. Because right after that my Kernel celularar stopped recognizing the USB device for a time that is normal.
Rage Kernel, X Kernel and kernels created by bbooff should work on all stock(including .42, .58, .62, .69 and many others) and stock-based ROMs.
GB kernels work only on GB, ICS kernels work only on ICS.
Kernel flasher
Someguyfromhell said:
Rage Kernel, X Kernel and kernels created by bbooff should work on all stock(including .42, .58, .62, .69 and many others) and stock-based ROMs.
GB kernels work only on GB, ICS kernels work only on ICS.
Click to expand...
Click to collapse
Kernel only works on GB and GB Kernel ICS ICS only works on this I know. That's why I had to Madar Kernel to use this ROM Hybrom which is based on GB. It was then that the problem had a second boy from the Facebook group I started | Kernel Rage is that it currently uses in cell http://forum.xda-developers.com/showthread.php?t=1398910 it all works perfect ROM and Kernel. In my not work as I did everything right in the tutorial and the Kernel flasher I used the flash code script to write the kernel. After I did the tutorial teaches you how. Get stuck in boot screen did all limpesas as taught and nothing. When I went to reflasher the kernel you were using ICS Kernel Before the computer stopped recognizing the phone Fastboot mode. By great luck my backup of the original ROM ClockworkMod was recovered successfully. Now I'm afraid to apply in Kernel flasher and it does not return to work.
I need to know what damage they can imreparaveis to come when a kernel applied to a ROM in a dispositovo that is not supported as in my case.
I'm a complete noob when it comes to tinker my x10. I recently installed DonutHD2.2 on it, it has baseband 2.1.71 and Kernel 2.6.29-000530g5f01537 [email protected] #1....
I've heard alot about doom kernel and the others, however I want to know what's the basic purpose of a custom kernel and which one is the best for my rom. Stable wifi connection is my highest priority xD.
Please help a newbie .
tak_juju said:
I'm a complete noob when it comes to tinker my x10. I recently installed DonutHD2.2 on it, it has baseband 2.1.71 and Kernel 2.6.29-000530g5f01537 [email protected] #1....
I've heard alot about doom kernel and the others, however I want to know what's the basic purpose of a custom kernel and which one is the best for my rom. Stable wifi connection is my highest priority xD.
Please help a newbie .
Click to expand...
Click to collapse
Hi,
kernel is the main system core of every LINUX or UNIX system, even on Android (its something like non.consistent linux...) which controlls the whole hardware available on system - e.g. display,processor, memory, wifi and bt and so on.
As you wrote, your system has stock kernel - standart delivered from SE.
You can use any kernels from XDA for X10i, there are not so much differences between them. The main thing is the CPU governors. Stock kernel doesnt have good CPU governor (called "ondemand"), so it drains battery all the time. Thats the one thing related to kernel. There are also some optimalizations and so on like undervolting, possibility to load external harware support drivers an a lot of other stuff.
But for begginner, you would probably appreciate only the CPU governors, because of battery life.
HeliumX10 said:
Hi,
kernel is the main system core of every LINUX or UNIX system, even on Android (its something like non.consistent linux...) which controlls the whole hardware available on system - e.g. display,processor, memory, wifi and bt and so on.
As you wrote, your system has stock kernel - standart delivered from SE.
You can use any kernels from XDA for X10i, there are not so much differences between them. The main thing is the CPU governors. Stock kernel doesnt have good CPU governor (called "ondemand"), so it drains battery all the time. Thats the one thing related to kernel. There are also some optimalizations and so on like undervolting, possibility to load external harware support drivers an a lot of other stuff.
But for begginner, you would probably appreciate only the CPU governors, because of battery life.
Click to expand...
Click to collapse
I hear doom kernel is good, but it has wifi problems, especially with the latest version. Which kernel would you recommend?
Try doomkernel or zKernel, but u must know that some kernels are for locked and some for unlocked bootloader. U have doom for both.
Sent from my xperia "z10i"
tak_juju said:
I hear doom kernel is good, but it has wifi problems, especially with the latest version. Which kernel would you recommend?
Click to expand...
Click to collapse
Yes, I am also running DoomKernel
I am using 2.6.29-modFXP-DooMKernel-v04b; could recommend it. And wifi works great (using it often, dont want 3G data plan).
As was told - depends if you are on locked or unlocked bootloader; but locked doesnt matter I have it also for to be completely save
HeliumX10 said:
Yes, I am also running DoomKernel
I am using 2.6.29-modFXP-DooMKernel-v04b; could recommend it. And wifi works great (using it often, dont want 3G data plan).
As was told - depends if you are on locked or unlocked bootloader; but locked doesnt matter I have it also for to be completely save
Click to expand...
Click to collapse
I don't know if I have locked or unlocked bootloader. ^.^
How do I check?
Also if I install any of these custom kernels, would I be able to restore the original SE kernel if needed?
U can check it with s1tool, find it on this thread (step for unlocking bootloader). And yes, u can return ur stock kernel, with flashtool. All info u can find on this thread:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my xperia "z10i"
tak_juju said:
I don't know if I have locked or unlocked bootloader. ^.^
How do I check?
Also if I install any of these custom kernels, would I be able to restore the original SE kernel if needed?
Click to expand...
Click to collapse
If you havent done bootloader unlock, you have locked bootloader Or test as described above
And yes, if you will install any custom kernel you are still able to load original kernel from SE. In case you will delete locked bootloader image; the stock kernel will load instead. This is on locked bootloader, dont know if this also on locked kernels.
No, DoomKernel doesn't have WiFi problems...I think you said it because once you have DoomKernel installed on your phone, you must flash and adittional file using Flashtool that is called Wifi Module, and everything will be fine again..
Just referring to this thread:
http://forum.xda-developers.com/showthread.php?t=1673050
Maybe there are no problems than, guess I'll install it and inform you guys if it works .
How do I backup my stock kernel?
tak_juju said:
Just referring to this thread:
http://forum.xda-developers.com/showthread.php?t=1673050
Maybe there are no problems than, guess I'll install it and inform you guys if it works .
How do I backup my stock kernel?
Click to expand...
Click to collapse
Personally I havent used Feralab ROMs, but on other ones I didnt have any problems.
You dont need to backup stock kernel, it cant be erased (only after bootloader unlock).
If you will find any problems, we or I will surely help you
Yap, on locked BL u can't erase stock kernel, u don't need to backup.
Sent from my "z10i"
Been on thgo's kernels for a very long time now, and it still is the best for me.
Sent from my Xperia X10 using XDA
Flashing Kernel
I am a total newbie and have rooted my x10 and unlocked its bootloader. But now I want to use custom roms but do not know how to flash a custom kernel. Can you guide to a thread which can show step by step guide on flashing custom kernel???
Any help would be greatly appreciated.
I am searching all the threads since last month without any success.
diehardluck said:
I am a total newbie and have rooted my x10 and unlocked its bootloader. But now I want to use custom roms but do not know how to flash a custom kernel. Can you guide to a thread which can show step by step guide on flashing custom kernel???
Any help would be greatly appreciated.
I am searching all the threads since last month without any success.
Click to expand...
Click to collapse
I guess that you can find a complete tutorial on FlashTools topic under the complete FlashTool guide.
Long story short:
1 Install Flashtool and put desired kernel file inside the firmware folder (which is located inside flashtool folder)
2 Connect phone with unknown sources and USB debugging checked on and check if its recognized
3 Click the flash button (the one with the little thunder), select the kernel file
4 Follow FlashTools instructions (it will show up after you select the files and hit ok)
5 ??????
6 Profit
Driver
wha is mali drivers
a2296455 said:
No, DoomKernel doesn't have WiFi problems...I think you said it because once you have DoomKernel installed on your phone, you must flash and adittional file using Flashtool that is called Wifi Module, and everything will be fine again..
Click to expand...
Click to collapse
That additional file called WIFI module or WIFI fix must be flashed via Xrecovery, because it's a zip file. With Flashtool you flash just FTF files (FlashTool File).
Doomkernel (V06) are good, Ferakernel also, ThJap th n5-1... This are kernels for Stock based Roms.
For non-Stock based Roms, like CM 7.2 AND CM9.1 based Roms, you must use kernels which are based on that Roms (FXP kernel, Amin kernel...)
That rom that you were flashed (Donut 2.2.9) is one of the best Stock based Rom. You can use Doomkernel v.06 with medium OC (Overclock) 1113 Mhz. First download Doomkernel on PC, and put that file in Flashtool/firmware folder. Than download WIFI module for that kernel and put on SD card of your phone(every kernel have specific wifi module). Flash kernel via Flashtool, when finished, reboot into Xrecovery ( when you power up your phone and blue led lights up, keep pressing Back button on your phone). Choose Install custom zip, than find your downloaded Wifi module and choose to install. After that, choose Reboot option in Xrecovery and enjoy...
Sent from my SO-01C using xda premium
Hi everyone!
I'm tired using custom roms for their instability and fc's everywhere for over a year I didnt found Rom that works perfect all the time with many apps installed so I just want to my phone work, dont want to flash new system every month again.
I was running stock with deleted apps, Set Cpu (tnx to gregbradley (edit: that was neoxx3m very good advidce, sorry my bad) and z-kernel for about 4 months and I was happy, that was one and only Rom that i've used so long. Yes it wasnt so fast but it was very stable and everything works so nice not even one fc. (kindda wierd couse ive installed z-kerner on my Unlocked BL x10 and now I can't and dont wanna to play and relock)
So i wanna repair my phone and get back to stock, root it, delete all uneeded apps and flash the most stable kernel so will it be failsafe from doom right?
And the question is will my plan work? I know that phone will not be so fast but will everything work and this is all I need or maybe someone has better idea?
Also have some questions about the newest fw for this Doom UB kernel. Where do i get this newest se fw?
Any help will be very appriciated.
Restore the phone back to stock using SEUS. That should do the trick
Sent from my X10i using xda premium
Last few ROMS Ive installed from scratch. So repair, root, etc I've even format sd card everythime i flash new rom. The question is:
Will doomkernel work on stock rom repaired in pc companion?
Will it be stable?
DoomKernel is stable on stock unlocked BL, but u have few version. X, S and one more i think. Look at his thread an try it.
Sent from my "z10i"
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Someone made the topic that He was tring to flash this newest firmware (3.x.x.x) and ended with no boot and anything could help him
I was running stock with deleted apps, Set Cpu (tnx to gregbradley advidce) (...) and I was happy,
Click to expand...
Click to collapse
Of course that was your your advice neoxx3m sorry
netox187 said:
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Click to expand...
Click to collapse
It will work because when u repair ur phone via PCC u get latest firmware (2.3.3/3.x.x.x.x.x), but my advice is to try relock BL and use zKernel, i did that yesterday and i'm happy again!
Sent from my "z10i"
I told you that dont wanna play with bootloader no more, maybe for some time i would like to try some kernel or rom (if im not happy for using stock and doom) and will have to unlock again so im patience (tring to) and will not to this for a while.
Anyway strange is that i flash zKernel even if i had unlocked Bootloader and it work fine but when i tried to do this again ( didnt know that this kernel is fo Locked only) it didnt work
i been trying to install [ROM] MiniCM7Pro on my x10 mini pro but i get stuck on a black screen everytime, can some one guide me here please.
This are the steps i get right
my phone its successfully rooted, i also manage to unlock the bootloader, and install CWM.
but then i get confused installing the kernel and the ROM,
i installed Fa Kernel 01a FIX with flashtool but then when my phone boots up it gets stuck in a black screen
what am i doin wrong?
83RN15 said:
i been trying to install [ROM] MiniCM7Pro on my x10 mini pro but i get stuck on a black screen everytime, can some one guide me here please.
This are the steps i get right
my phone its successfully rooted, i also manage to unlock the bootloader, and install CWM.
but then i get confused installing the kernel and the ROM,
i installed Fa Kernel 01a FIX with flashtool but then when my phone boots up it gets stuck in a black screen
Click to expand...
Click to collapse
MiniCM7Pro will only run on the stock kernel, there was no need to unlock your bootloader, and most certainly not to install a custom kernel. Get back to stock kernel (I think there's a link provided for a kernel you can flash with flashtool) and then run MiniCM7Pro.
SmG67 said:
MiniCM7Pro will only run on the stock kernel, there was no need to unlock your bootloader, and most certainly not to install a custom kernel. Get back to stock kernel (I think there's a link provided for a kernel you can flash with flashtool) and then run MiniCM7Pro.
Click to expand...
Click to collapse
thanks for the help,
i will try to fly the rom straight with the stock kernel,
i have a question, when im i install this kind of roms do i always need to install the kernel first?
83RN15 said:
thanks for the help,
i will try to fly the rom straight with the stock kernel,
i have a question, when im i install this kind of roms do i always need to install the kernel first?
Click to expand...
Click to collapse
No, the order doesn't really matter, but your phone will only work if you pair the right kernel and the right rom together. The ROM post will state which kernel it will run on.
so for:
MiniCM7Pro - Stock Kernel
MiniCM7 - nAa-13 Gingerbread kernel
ArcMiniNxt - Just about every kernel
MiniCM9 - nAa-04 ICS kernel
SmG67 said:
No, the order doesn't really matter, but your phone will only work if you pair the right kernel and the right rom together. The ROM post will state which kernel it will run on.
so for:
MiniCM7Pro - Stock Kernel
MiniCM7 - nAa-13 Gingerbread kernel
ArcMiniNxt - Just about every kernel
MiniCM9 - nAa-04 ICS kernel
Click to expand...
Click to collapse
Thank you very much!!!
that was very helpfull.
in your opinion which rom do you think i should go for? i want to try gingerbread for the moment..
the main reason i rooted my phone was cause i wanted to be able to use apps2sd app
83RN15 said:
Thank you very much!!!
that was very helpfull.
in your opinion which rom do you think i should go for? i want to try gingerbread for the moment..
the main reason i rooted my phone was cause i wanted to be able to use apps2sd app
Click to expand...
Click to collapse
Just about all roms that state they're based on CyanogenMod (CM) include App2SD by default, all you have to do it activate it in settings.
ArcMiniNxt is a Gingerbread ROM with a sony ericsson framework, so it will look and work a bit like the original firmware, but based on Gingerbread, and it will run on the stock kernel. It seems smooth and easy on battery-life.
MiniCM7 is sort of the 'default' ROM to go for if you want Android look-and-feel, it is further developed than MiniCM7Pro, but you will need the nAa-gingerbread kernel for it. It is also very smooth and fast.
Mind you, nothing is perfect, you can expect some problems with your keyboard layout and keyboard lights on all Gingerbread ROMS, but there are fixes for that if you care to search through the x10minipro development forum
SmG67 said:
Just about all roms that state they're based on CyanogenMod (CM) include App2SD by default, all you have to do it activate it in settings.
ArcMiniNxt is a Gingerbread ROM with a sony ericsson framework, so it will look and work a bit like the original firmware, but based on Gingerbread, and it will run on the stock kernel. It seems smooth and easy on battery-life.
MiniCM7 is sort of the 'default' ROM to go for if you want Android look-and-feel, it is further developed than MiniCM7Pro, but you will need the nAa-gingerbread kernel for it. It is also very smooth and fast.
Mind you, nothing is perfect, you can expect some problems with your keyboard layout and keyboard lights on all Gingerbread ROMS, but there are fixes for that if you care to search through the x10minipro development forum
Click to expand...
Click to collapse
i just installed MiniCM7Pro, rebooted the phone and its now stuck on that android motion logo :S is this normal?
edit: NVM it is normal ahha.. xD i now have it perfectly installed im in love with its interface. i now have to get use to it.
Hi,
I've install ka11 with the kernel v5 and when i boot , i have optimizing applications... 258/258, and there i freeze on launching application ,...
what can i do please ?
thanks
Try a kernel without high overclock.
Sent from my LT26i using Tapatalk 2
Similar issue.
I have tried installing this several times to no avial.
I have installed the base 4.0.4 Stock rom - then DOOM kernel - Then installed the KA11 - Then installed Advanced ICS Kernel - then flashed the V5 kernel to go with the ROM... and all i get is the hanging on boot and then eventual reboot.
I have tried flashing it all through aurora - still nothing even on GB KERNEL - Previous kernel V3 everyone that I can think of.
The only way I can get KA11 to work is if I use Advanced ICS kernel. I do the full wipe and davlik... also fix permissions. I have almost tried everything. Does anyone have any ideas.
I am all out. I would love to try this rom... I have flashed a lot of units without issue... THEN THIS... lol
Cheers.
hey try this install ka11 then use xsx kernel it has oc also but up to 1.7 only, after 1 day or 1 night install the ka v5 kernel, works for me, at first i got bootloop with ka kernel but after using xsx for a night, i installed ka kernel v5 and got no bootloop. good luck
I got it working
mharckk said:
hey try this install ka11 then use xsx kernel it has oc also but up to 1.7 only, after 1 day or 1 night install the ka v5 kernel, works for me, at first i got bootloop with ka kernel but after using xsx for a night, i installed ka kernel v5 and got no bootloop. good luck
Click to expand...
Click to collapse
I flashed STOCK - then installed Doom. Installed KA11 with Auroa - then cleared davlik again and cleared cache etc... I then flashed XSX and boom. All works. FINALLY. Don't know if i want to install KA kernel V5 now
Cheers mate.
I'm having force close to mostly every app I have, even when I'm setting a new wallpaper. I think KA11 has still more bugs, so I'm still waiting for an update/bug fix
HI, if i want to return to the industry firmware can i use the update via pc companion ? i have installed advanced stock 01 and ka08 .
Thanks a lot for your answer, in fact i would like to begin again to zero as i have just bought my phone , you know..
Thanks
you must relocked your bootloader and then u can update thru pc companion
tutorial unlocking bootloader & relocking