Hi,
I've install ka11 with the kernel v5 and when i boot , i have optimizing applications... 258/258, and there i freeze on launching application ,...
what can i do please ?
thanks
Try a kernel without high overclock.
Sent from my LT26i using Tapatalk 2
Similar issue.
I have tried installing this several times to no avial.
I have installed the base 4.0.4 Stock rom - then DOOM kernel - Then installed the KA11 - Then installed Advanced ICS Kernel - then flashed the V5 kernel to go with the ROM... and all i get is the hanging on boot and then eventual reboot.
I have tried flashing it all through aurora - still nothing even on GB KERNEL - Previous kernel V3 everyone that I can think of.
The only way I can get KA11 to work is if I use Advanced ICS kernel. I do the full wipe and davlik... also fix permissions. I have almost tried everything. Does anyone have any ideas.
I am all out. I would love to try this rom... I have flashed a lot of units without issue... THEN THIS... lol
Cheers.
hey try this install ka11 then use xsx kernel it has oc also but up to 1.7 only, after 1 day or 1 night install the ka v5 kernel, works for me, at first i got bootloop with ka kernel but after using xsx for a night, i installed ka kernel v5 and got no bootloop. good luck
I got it working
mharckk said:
hey try this install ka11 then use xsx kernel it has oc also but up to 1.7 only, after 1 day or 1 night install the ka v5 kernel, works for me, at first i got bootloop with ka kernel but after using xsx for a night, i installed ka kernel v5 and got no bootloop. good luck
Click to expand...
Click to collapse
I flashed STOCK - then installed Doom. Installed KA11 with Auroa - then cleared davlik again and cleared cache etc... I then flashed XSX and boom. All works. FINALLY. Don't know if i want to install KA kernel V5 now
Cheers mate.
I'm having force close to mostly every app I have, even when I'm setting a new wallpaper. I think KA11 has still more bugs, so I'm still waiting for an update/bug fix
HI, if i want to return to the industry firmware can i use the update via pc companion ? i have installed advanced stock 01 and ka08 .
Thanks a lot for your answer, in fact i would like to begin again to zero as i have just bought my phone , you know..
Thanks
you must relocked your bootloader and then u can update thru pc companion
tutorial unlocking bootloader & relocking
Related
Hello all,
Okk,actually story starts from the day custom kernels are released.Here we go:
I was on wb v4 when actually doom released his custom kernels,he had two versions X/S AND FS Series.First i tried x/s series kernel and was stuck on XPERIA logo.Then,i tried FS Series it worked but cant overclock.. then i came to know that coz of some files in the ROM,u cant install x/s series untill u delete those files.
Then,WB released v5,again first i tried custom version but then also i was stuck on xperia logo.Then,i tried stock version it worked but u cant overclock.I decided to retain on stock version for some time.
Then WB released v6,now i tried gaming ROM first but guess what? I was again stuck on xperia logo.I flashed Doom's fs kernel then the ROM worked but u cant overclock.
WHENEVER I FLASHED ANY CUSTOM KERNEL OR CUSTOM ROM WITH THE CUSTOM KERNEL I WAS STUCK ON XPERIA LOGO....
I am not able to boot wb's gaming rom,always stuck on xperia logo.
Need help...
P.S. BOOTLOADER UNLOCKED.
EDIT 1:
Noticed one thing when i flashed doom's kernel v4b, it doesn't vibrate when u power it ON.
But with FS kernel it does...argh!! what the hell!!
Sent from my X10i using Tapatalk
The fact that you can install ROMs means that you have xrecovery installed and rooted 2.3.3. So my only advice would be to make sure your on the right baseband .71 and the original stock kernel. Then install wolf gaming rom. If you still can't boot up...then start from a completely clean 2.3.3 GB STOCK ROM and try over again. OR your phone is serious and cannot handle any OC or UC or UV or OV and that is possible since other users have similar issues.
nice username. By the way ZEUS raped his sister.
bharadwaj1991 said:
The fact that you can install ROMs means that you have xrecovery installed and rooted 2.3.3. So my only advice would be to make sure your on the right baseband .71 and the original stock kernel. Then install wolf gaming rom. If you still can't boot up...then start from a completely clean 2.3.3 GB STOCK ROM and try over again. OR your phone is serious and cannot handle any OC or UC or UV or OV and that is possible since other users have similar issues.
nice username. By the way ZEUS raped his sister.
Click to expand...
Click to collapse
trying now!!
w8!
Noticed one thing when i flashed doom's kernel v4b, it doesn't vibrate when u power it ON.
But with FS kernel it does...argh!! what the hell!!
P.S i tried repairing it with SEUS it does repaired, i rooted it, then intalled xrecovery, then cleanly installed WB's Gaming ROM and again stuck on Xperia logo...
anyone who can help me here..??
bump!
How does it behave after flashing SE kernel (repair with SEUS or FT)? Did you boot and test before rooting again?
Karl
Hi
I have tried all day to install ICS on my Neo V, and I always end up in a boot loop (after the XPERIA logo it restarts). I have tried KA06 ICS and another Sony based ICS ROM.
I'm pretty new to this and I'm not sure what info you need so please ask away.
One thing I noticed is that whenever I clear the dalvic-cache it gives an error (not mounted or something i think?)
Thanks
flangefrog said:
Hi
I have tried all day to install ICS on my Neo V, and I always end up in a boot loop (after the XPERIA logo it restarts). I have tried KA06 ICS and another Sony based ICS ROM.
I'm pretty new to this and I'm not sure what info you need so please ask away.
One thing I noticed is that whenever I clear the dalvic-cache it gives an error (not mounted or something i think?)
Thanks
Click to expand...
Click to collapse
Did you succesfully unlocked your bootloader and installed a custom kernel?
Thats what i did to install k6 on my neo v.
1º Flash .64 baseband.
2º Flash .62 baseband with flashtools(check exclude baseband).
3º Flash kernel.
4º Recovery wipe all + install k6.
5º Flash neo-v patch.
if i install .64 baseband im stuck on xperia boot image loops.
equlog said:
Thats what i did to install k6 on my neo v.
1º Flash .64 baseband.
2º Flash .62 baseband with flashtools(check exclude baseband).
3º Flash kernel.
4º Recovery wipe all + install k6.
5º Flash neo-v patch.
if i install .64 baseband im stuck on xperia boot image loops.
Click to expand...
Click to collapse
Do you try boot once then install Neo v patch?
Find me at Gtalk
Gmail: PM
Using XDA on my Neo V
Sorry for my bad English...
@krabappel2548 It came unlocked and with a custom 2.3 rom when I bought it. I can install a stock 2.3 rom using flashtool fine.
@equlog Yes this time I didn't flash the 64 baseband from the KA thread and just left the stock one on. (I had .62 stock)
@wilsonchuchu I tried that but it didn't help
EDIT: Somehow it works now! I flashed the stock rom again and have been using it for a while (I rebooted a couple of times), then I flashed the non-oc kernel and this time I was able to clear the dalvic-cache. The rest worked fine and I've just booted in to the phone. I'm not sure why it worked this time because I've been doing this all day.
Now for KA7 lol
Thanks for your help
wilsonchuchu said:
Do you try boot once then install Neo v patch?
Click to expand...
Click to collapse
Yes, i can boot without install neo-v patch without any problem.
flangefrog said:
@krabappel2548 It came unlocked and with a custom 2.3 rom when I bought it. I can install a stock 2.3 rom using flashtool fine.
@equlog Yes this time I didn't flash the 64 baseband from the KA thread and just left the stock one on. (I had .62 stock)
@wilsonchuchu I tried that but it didn't help
EDIT: Somehow it works now! I flashed the stock rom again and have been using it for a while (I rebooted a couple of times), then I flashed the non-oc kernel and this time I was able to clear the dalvic-cache. The rest worked fine and I've just booted in to the phone. I'm not sure why it worked this time because I've been doing this all day.
Now for KA7 lol
Thanks for your help
Click to expand...
Click to collapse
You can install KA07 without wiping everything
krabappel2548 said:
You can install KA07 without wiping everything
Click to expand...
Click to collapse
K7 already going to flash right now.
since i cant post int dev forums.. thanks krabappel! great work!.
equlog said:
K7 already going to flash right now.
since i cant post int dev forums.. thanks krabappel! great work!.
Click to expand...
Click to collapse
You're welcome I also updated Neo V patch
KA06 looks really good, just one problem so far (if you can call it that) the cosmic flow live wallpaper crashes every time I try to add it. The other live wallpapers work. Is this because the hardware acceleration isn't fully implemented yet?
Downloading KA07 now
flangefrog said:
KA06 looks really good, just one problem so far (if you can call it that) the cosmic flow live wallpaper crashes every time I try to add it. The other live wallpapers work. Is this because the hardware acceleration isn't fully implemented yet?
Downloading KA07 now
Click to expand...
Click to collapse
Yes, that could be the reason.. Think I'll remove the Cosmic flow wallpapper in next versions
@krabappel
Will u made a mod when sony release official ics? i hope ^^
I've just been reading some more about the fw/basebands and it looks like the .62 firmware does include the .64 baseband. Looking in about phone seems to confirm that. Am I right?
.62 f/w has .64 baseband
Thanks, so for anybody else having problems with the Neo V it seems the best way would be:
1: Flash .62 firmware
2: Flash KA kernel.
3: Boot into recovery, wipe all + install KA.
4: Flash neo-v patch.
Here is the stock firmware .62 as an update.zip (for installing with ClockWorkMod): http://forum.xda-developers.com/show....php?t=1518148
These are for flashtools: http://forum.xda-developers.com/show....php?t=1445974 (I used this one), http://forum.xda-developers.com/show....php?t=1492145
equlog said:
@krabappel
Will u made a mod when sony release official ics? i hope ^^
Click to expand...
Click to collapse
Yes, I will make a mod when official ICS comes
@krabappel2548
I think I may have found the battery life problem. Looking at the battery usage under settings, the gallery app shows by far the most battery usage. When I go to apps and find gallery I see it's running a service called picassa sync. Disabling picassa sync on all the Google accounts and then force closing the gallery app seems to fix the battery usage. Can some other people please try it and confirm if it works?
After doing this the cpu time and amount of the battery used by the gallery app does not get any higher, even if I make sure the gallery is running again and it moves down the list and the highest battery usage becomes the screen.
Sent from my MT11i using xda premium
happened to me just now in KA12 ICS after I tried to remove the onscreen buttons
off topic
and about the widgets.. did anyone seems to have a problem with it? I have this battery widget after putting it up in homescreen, it doesn't move at all though the battery is decreasing, the widget stays the same. Same with player pro widget, you can press the next button fine but the music title and the album thumbnail stays.
Please help me, i tried to update my friend's phone to ICS KA16 and the wifi stops working. I'm using Night Elf v1 kernel.
anyone experienced this or it's just me? I will try to re-flash the kernel and rom.
harristgp said:
anyone experienced this or it's just me? I will try to re-flash the kernel and rom.
Click to expand...
Click to collapse
I tried to re-flash the kernel, rom, patch. Wipe everything but no luck.
I also notice that the touchscreen is not so responsive. It takes 4-6 tries to unlock the phone.
I have issues lite those after returning to stock kernel from night elf.
Night elf has its own modules, automatically flashed with kernel. If you flash stock kernel you will need to flash stock modules. But I was not able to find them, nor extract them from ftf file.
Why post a new thread? ask it where you get the rom from
Pandemic said:
Why post a new thread? ask it where you get the rom from
Click to expand...
Click to collapse
Because I don't have permission to post in development section lately.
genyt said:
I have issues lite those after returning to stock kernel from night elf.
Night elf has its own modules, automatically flashed with kernel. If you flash stock kernel you will need to flash stock modules. But I was not able to find them, nor extract them from ftf file.
Click to expand...
Click to collapse
I think the problem is the rom itself. 3 of us using this rom experience this problem.
harristgp said:
Because I don't have permission to post in development section lately.
Click to expand...
Click to collapse
so you post a new thread:/
Pandemic said:
so you post a new thread:/
Click to expand...
Click to collapse
Of course yes, just to increase my post count and to warn other people who's planning to update their rom.
Try to flash the ICS version, after that everything is restored (guide).
After that I went to this kernel (unlock bootloader first) [KERNEL] [UPDATE] Stock ICS (4.1.A.0.562) with init.d support + root + cwm
since it gives you all the wanted features, CWM built in. Will work with stock ICS.
And his rom is very nice too: [ROM][Neo V][ICS] Spacious, smooth and light ICS. You need V2, the other is for NightElf kernel.
Maxximus007 said:
Try to flash the ICS version, after that everything is restored (guide).
After that I went to this kernel (unlock bootloader first) [KERNEL] [UPDATE] Stock ICS (4.1.A.0.562) with init.d support + root + cwm
since it gives you all the wanted features, CWM built in. Will work with stock ICS.
And his rom is very nice too: [ROM][Neo V][ICS] Spacious, smooth and light ICS. You need V2, the other is for NightElf kernel.
Click to expand...
Click to collapse
Thanks but I want the Ice Cream Sony ROM.
KA16 WIFI issue!
The same issue as you,my phone also doesn't work
i think wifi is related to kernel....try change kernel..
but i didnt had a wifi issue in KA16 with night-elf ICS rc2 full without zram..
KA16 WIFI issue
pls re-download the ROM,it's solved in the new KA16 ROM
Hi,
I installed ROM KA18 with kernel v1.0 RC3:
http://forum.xda-developers.com/showthread.php?t=1566871
KA18 works good, the problem is when I upgrade to ROM KA19 that the device starts a loop, all I get is the Sony logo and then the Xperia logo over and over again.
My phone is an Xperia neo.
I know that the bootloader is unlocked because ROM KA18 works fine.
Make a full wipe (data,cache and dalvik cache).
already tried clearing everything, factory reset, clearing Dalvik cache, and I get the same result. Boot loop.
Try with another kernel.
Sent from my Sony Xperia Neo using XDA
I just tried with XNeo ICS v1.1 and got the same result...
I got tired of trying different kernels and the same boot loop so I decided to stick with KA18 for the moment. at this point I need to make some calls .
If somebody finds a solution, please let me know, thanks!
sdato001 said:
I got tired of trying different kernels and the same boot loop so I decided to stick with KA18 for the moment. at this point I need to make some calls .
If somebody finds a solution, please let me know, thanks!
Click to expand...
Click to collapse
I used the version 3 of the kernel available in the same thread instead of the latest modified version 4 and KA19 worked for me
Sent from my MT11i using Tapatalk 2
monil.verma said:
I used the version 3 of the kernel available in the same thread instead of the latest modified version 4 and KA19 worked for me
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
Hi, what exact kernel are you running?
I am running 2.6.32.9-v1 ([email protected] #2)
This one worked for me.
www.mediafire.com/?1v959naubi1vbvg
Sent from my MT11i using Tapatalk 2
sdato001 said:
Hi, what exact kernel are you running?
I am running 2.6.32.9-v1 ([email protected] #2)
Click to expand...
Click to collapse
just use inteks ICS kernel. i'm using it since KA16 and everything works perfectly in KA19 for me. here is the kernel: http://forum.xda-developers.com/showthread.php?t=1521309
oh and next time, ask your question in that ROM's own thread.
codephos said:
just use inteks ICS kernel. i'm using it since KA16 and everything works perfectly in KA19 for me. here is the kernel: http://forum.xda-developers.com/showthread.php?t=1521309
oh and next time, ask your question in that ROM's own thread.
Click to expand...
Click to collapse
Hi,
Thanks for the information, I will test the Kernel later today.
I was going to ask in the ROM's thread but I was not able because you need to have 10 post to post in a development threat and I didn't have 10 yet.
I have KA19
to install it please
Install a fresh KA18
Install KA19
reinstall KA18
Install KA19
Don't wipe data or cache or dalvik..never!
I use night elf rc3 kernel
just flash this
Code:
mediafire.com/?gd5dfh51tl2sqle
and flash stock rom
So, I have installed DonutHD 2.2.9 rom and 2.2.9r2update2 update and also flashed ThKernel N5-1. The problem is that my phone reboot like five to seven times a day. Is there any workaround or should I just for example try Doomlords kernel? Need some help ty.
E2Razor said:
So, I have installed DonutHD 2.2.9 rom and 2.2.9r2update2 update and also flashed ThKernel N5-1. The problem is that my phone reboot like five to seven times a day. Is there any workaround or should I just for example try Doomlords kernel? Need some help ty.
Click to expand...
Click to collapse
Yes I would do that. I'm using it with DoomLord's kernel and it works great
I installed Doomlord's kernel but it slowed my phone so much that it looked like it was underclocked all the time. Now I installed stock kernel and looks like that it's working great.