so i got an at&t xperia but none of the root methods for other plays seem to work, i have the r800at build 3.0.1.B.0.270 android 2.3.3.
anything on this?
get 4.0.1/4.0.A ,use the RooTxperia.ZIP and CWM based recovery
where at good sir
theres a topic called [WIP] CWM based recovery
all files are there
Cat_On_Droid said:
get 4.0.1/4.0.A ,use the RooTxperia.ZIP and CWM based recovery
Click to expand...
Click to collapse
@waldoelx7241 for that you will need an unlocked bootloader, I can help with that
Just pm me
do u as well have the at&t branded one?
Alejandrissimo unlocked mine and helped me with rooting process. used cwm to do it. still not brave enough to try any other roms or kernels though. wanted root primarily for tethering, setcpu, camera mod, and disable auto brightness.
---------- Post added at 07:53 PM ---------- Previous post was at 07:51 PM ----------
as soon as you boot into cwm make a backup.
Can't recommend Alejandrissimo highly enough, was very fast and helpful.
Can't find any guide for the r800at online
Going to have to get help from the pros on this one!
alejandrissimo unlocked mine, thanks again!
waldoelx7241 said:
alejandrissimo unlocked mine, thanks again!
Click to expand...
Click to collapse
Same here! That guy is fantastic! Highly recommended
after the boot loader unlocking, I successfully flashed the 2.3.3 r800a rom and oh the difference to the at&t crappy stock rom. I say get alejandrissimo to unlock your boot loader and get the r800a rom in your phone
waldoelx7241 said:
after the boot loader unlocking, I successfully flashed the 2.3.3 r800a rom and oh the difference to the at&t crappy stock rom. I say get alejandrissimo to unlock your boot loader and get the r800a rom in your phone
Click to expand...
Click to collapse
Do you still have access to 4G Data and Phone calls/voicemail?
I was looking for a rom to flash and can't decide what to do.
yes i do, after i did the initial setup I went under wireless and networks and then mobile networks, then access point names.
I created 2 apns that are the apn's on a stock att play
apn name: att
apn: wap.cingular
proxy: wireless.cingular.com
port: 80
username: blank
password: blank
server: blank
mmsc: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port:80
MCC: 310
MNC: 410
Authentication: blank
APN Type: mms,supl,aab
apn name: Phone
APN: Phone
Proxy: blank
port: Blank
username: blank
password: blank
server: blank
mmsc: blank
MMS Proxy: blank
MMS Port: blank
MCC: 310
MNC: 410
Authentication: blank
APN Type: default
i selected apn att and viola 4g is active with mms, text, voicemail etc
Awesome! I think I will give it a shot
Do you have a link to a flashing guide? I found the firmware. Anything i should while i attempt this?
Also do i have to root the phone again afterwards?
Sorry for all the questions. Still learning android
i dont have a guide but basically what I did was download this:
http://forum.xda-developers.com/showthread.php?t=1255095
then i downloaded the SE flash tool for x10 that also works with the play:
http://forum.xda-developers.com/showthread.php?t=920746
when i unziped the flashtool i went in the folder that says firmwares and deleted all the x10 ones, left the folder empty and placed the r800a ftf i unziped from the r800a download.
i powered off the phone. i opened the flashtool, hit flash, a pop up comes up and displays the r800a firmware it found and you hit ok, this whole time the xperia is unplugged, when the flasher starts and realizes the phone isnt plugged it'll pop up and say press and hold back button and while pressing the button plug in phone, the indicator shoild light up green. the flasher will find the phone and flash it, when its all done itll tell u to unplug phone power it up then place the phone in debugging mode and allow 3rd party apps. the phone will power up saying Sony ericsson then itll do the sony boot instead of the att stock boot. the first time powering on takes a few minutes. viola your phone is now debranded and as far as the phone knows its now an r800a no longer an r800at
and yes after seting up the phone u have to root it again but thats easy
Sweet! Going to try this out this weekend
Are there any other tweaks/changes you recommend?
I would read Aerox912 's post a lil bit down on this page to make some more room in ur internal memory, i went from having 89mb of free internal app for apps to having 204mb, i also use app2sd and move any possible apps to the SD card
http://forum.xda-developers.com/showthread.php?t=1174160
waldoelx7241 said:
yes i do, after i did the initial setup I went under wireless and networks and then mobile networks, then access point names.
I created 2 apns that are the apn's on a stock att play
apn name: att
apn: wap.cingular
proxy: wireless.cingular.com
port: 80
username: blank
password: blank
server: blank
mmsc: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port:80
MCC: 310
MNC: 410
Authentication: blank
APN Type: mms,supl,aab
apn name: Phone
APN: Phone
Proxy: blank
port: Blank
username: blank
password: blank
server: blank
mmsc: blank
MMS Proxy: blank
MMS Port: blank
MCC: 310
MNC: 410
Authentication: blank
APN Type: default
i selected apn att and viola 4g is active with mms, text, voicemail etc
Click to expand...
Click to collapse
So you have 4 APNs on a att phone? I was gonna add those 2 you posted and deleted the original two. Any chance you would post all 4 up for me? Looks to be working with just the 2 posted, but if you got some extras I'm sure they might do something when I travel.
Sent from my R800a using xda premium
ill start off by saying good that the flash worked for you, and i saw that it does add 2 apn's for you. I work for at&t so what i did was i powered on a stock xperia play and read the original apn's on the at&t branded play.
so i went to my play's apn list and hit the menu button and hit "reset to default", after both apn's got erased i added the 2 apn's that i posted above and selected the att one to be the main one, phone has worked perfect with these settings
Related
After rooting my phone I couldnt access my data because my phone went from x10a to x10i!
Ive searched all around for tutorials on how to go back but most are outdated and omnius now requires money to buy a license. Please does anyone know of a free way to go back to x10a?
corruptedlolz88 said:
After rooting my phone I couldnt access my data because my phone went from x10a to x10i!
Ive searched all around for tutorials on how to go back but most are outdated and omnius now requires money to buy a license. Please does anyone know of a free way to go back to x10a?
Click to expand...
Click to collapse
Rooting should not have changed your phone to 10i, even so should still have access to data. Have you backed up?
If needed look through dev thread for flash tool, there are several 10a flashs availabile, also SEUS repair.
Well I dont know why but it went from x10a to x10i. I followed the tutorial that proyaz made on youtube to go to version R2. Ive looked all over for flash tools and they are all outdated. As for SEUS repair it tells me that my phone doesnt need an update or it cant be repaired because its not recognized. Do you know of any flash tools that are up to date? I have a few different x10a copies on my computer. Just no way of putting it on my phone.
corruptedlolz88 said:
Well I dont know why but it went from x10a to x10i. I followed the tutorial that proyaz made on youtube to go to version R2. Ive looked all over for flash tools and they are all outdated. As for SEUS repair it tells me that my phone doesnt need an update or it cant be repaired because its not recognized. Do you know of any flash tools that are up to date? I have a few different x10a copies on my computer. Just no way of putting it on my phone.
Click to expand...
Click to collapse
You need to enter your APN settings. If you are on AT&T here they are:
Go to Settings -> Wireless Controls -> Mobile Networks-> Access Point Names
Add a new APN. Don’t forget to Save the new APN by pressing the “more” button! Once you do this, you must select the newly created Internet APN.
Lastly, make sure there are no extra spaces after entering any of these values, else your 3G won’t work.
AT&T
<name> att
<apn> wap.cingular
<proxy> wireless.cingular.com
<port> 80
<username> not set
<password> not set
<server> not set
<mmsc> http://mmsc.cingular.com
<mms proxy> wireless.cingular.com
<mms port> 80
<mcc> 310
<mnc> 410
<apn type> not set
THANK YOU!!!
So it doesnt matter that my xperia is an x10i as long as i have that?
corruptedlolz88 said:
THANK YOU!!!
So it doesnt matter that my xperia is an x10i as long as i have that?
Click to expand...
Click to collapse
No, it should not matter. You can flash whatever firmware you like from here if you like. You will find both the X10a and X10i firmwares.
I know i asked this few places but mostly getting ignored.
Anyone know if it is possible to go back to 2.1.55 baseband for rogers if i did the 2.3.3 gingerbread manually?
I don't want to stay on 2.1.71 if possible because i am not getting 3g any longer.
thank you.
shameless bump, i want to know, i can not use 3g anymore defeat the whole purpose of update to 2.3.3
I'm using Rogers x10a, and installed the 2.3.3 (non-rooted version).
My baseband is 2.1.71 and I'm getting 3G without any issues.
have you confirmed your settings in:
Settings -> Wireless & Network Settings -> Mobile networks -> Network Mode
Mine is set to: GSM/WCDMA preferred.
Also for Network Operators. Mine gives me the choice of:
Rogers 2G
Rogers 3G
Bell 3G
and some weird one called 30220 3G.
So make sure you have Rogers 3G selected.
You need to input the apns . I'm On rogers too and it all works after I did this.
Go here
http://www.nexusoneforum.net/forum/rogers-discussion/3987-rogers-wireless-apn-settings-data-mms-here.html
Then go to access point names in your mobile network settings, and add a new apn for data and mms. Copy what he has exactly and presto! Your done.
Just one APN does the trick. I copied what my x10a had before updating to 2.3 x10i
APN
Name: Rogers Internet
APN: rogers-core-appl1.apn
MMSC: http ://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
(everything else is blank)
I thank you for all your reply, i seem to able to get it after i enter the apn as told, thank you so much.
P,S: never mind..after i put it got 3g but it put me on a reboot cycle ...
3g seem to put a lot stress on gingerbread on my x10.
Been using Wolf's for 4 days now on my Rogers X10a on the Rogers network in Toronto with ZERO issues.
Restore the APN: http://pastebin.com/jNse0tpf
wish i can say the same.
But after 2.1 update and a little later my phone started to restarting.
issue: http://talk.sonyericsson.com/message/24287
i already gave up the x10, 2.3.3 make it worse instant boot out as soon i enter "home page"
and worse is, i can't use PC companion now since it say "you have the latest update".
I am done with this piece of crap.
wrongfeifong said:
wish i can say the same.
But after 2.1 update and a little later my phone started to restarting.
issue: http://talk.sonyericsson.com/message/24287
i already gave up the x10, 2.3.3 make it worse instant boot out as soon i enter "home page"
and worse is, i can't use PC companion now since it say "you have the latest update".
I am done with this piece of crap.
Click to expand...
Click to collapse
hey I have the same problem as you. Rogers x10a using any 2.3 rom causes a crash/boot loop
You can go to this thread: http://talk.sonyericsson.com/message/59415 and download the ftf file and flash it to your phone with http://forum.xda-developers.com/showthread.php?t=920746 and then update your phone with SEUS
You should be back to Rogers branded firmware and if you're still under warranty you may be able to get an exchange or repair or something.
This thread: http://forum.xda-developers.com/showthread.php?t=801892 Seems to imply that our phones have a motherboard problem due to faulty soldering or misplaced insides.
Good luck to you.
Just repair the phone with PC Companion or reflash with the Flash Tool or xRecovery to see if the issue is still present.
Did you use the pre-rooted ROM? If so, did you follow ALL the instructions (factory reset, wipe cache, etc.) because not doing it may result in the problem you are having.
Also, there's no way to go from 2.3.3 to 2.1 with SEUS. You have to use the FlashTool.
Hi guys, I just bought a HTC Hero off of someone, it has the cyanogenmod 7 on it, and was apparently unlocked. Having an iPhone for, I bought an adapter for microsim to sim, and plopped my simcard in the Hero.
Only issue now is.. No service. if I run through settings and go to network operators, Virgin shows up (Virgin Mobile Canada). So if I select this, it tries to register with Virgin, and then I get the error "Unable to connect to this network at this time, please try again later".
Im new to android, so Im a little lost in how I might go about fixing this issue. Ive tryed checking the APN settings, they appear to be right, this is what I have for them:
BELL
Name: Bell
APN: pda2.bell.ca
MMSC: htt p://mms.bell.ca/mms/wapenc
MMS Proxy: web.wireless.bell.ca
MMS Port: 80
MCC: 302
MNC: 610
APN Type: mms
BELL INTERNET
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MCC: 302
MNC: 610
APN Type: Default
Im curious if those are set up right, and if they may be the issue. Also, could it be an issue with cyanogenmod, or that the phone was not unlocked correctly? If it is cyanogenmod, how might I go about getting the stock OS on the phone again?
Thanks for the help in advance,
the android noob,
Syntackz.
Syntackz said:
Im curious if those are set up right, and if they may be the issue. Also, could it be an issue with cyanogenmod, or that the phone was not unlocked correctly? If it is cyanogenmod, how might I go about getting the stock OS on the phone again?
Thanks for the help in advance,
the android noob,
Syntackz.
Click to expand...
Click to collapse
So you can try to flash another ROM, if you want the stock one you can try VillainROM 13 or the one from elelinux, both of the are tweaked stock versions with Sense UI made by htc...or you can flash a new version of gingerbread...
The problem with the signal can be caused by the sim or by the ROM...try another sim and see how it works, and try to flash another ROM, it's easy to do this
ROMS:
1.Android 2.1 with Sense UI [Elelinux] -> here
2.Android 2.1 with Sense UI [VillainROM] -> here
3.Android 2.3.5 Stock [JiieeHD] - > here
4.Android 2.3.5 [Elelinux] -> here
5.Android 2.2.1 [Erasmux] -> here
Keep me in touch how things go
Stefan
Thanks for the response, Ill try a new rom tonight, im sure its not the sim as it works in the iphone without any issues.
Have to go pick my girlfriend up from work and run some errands and such so I will attempt a new rom tonight.
Chances are I will get stuck trying to install a new rom, this is my first android phone and I bought it with cyanogen already on it, so I have no experience doing that.
Anyways, Ill post back later to let you know how it worked out!
Thanks,
Syntackz.
Syntackz said:
Thanks for the response, Ill try a new rom tonight, im sure its not the sim as it works in the iphone without any issues.
Have to go pick my girlfriend up from work and run some errands and such so I will attempt a new rom tonight.
Chances are I will get stuck trying to install a new rom, this is my first android phone and I bought it with cyanogen already on it, so I have no experience doing that.
Anyways, Ill post back later to let you know how it worked out!
Thanks,
Syntackz.
Click to expand...
Click to collapse
To start flashing a new ROM it's easy , try this -> here, or you can try youtube .
PS: try a sim from another phone, not from your iphone
Stefan
After flashing a stock Bell ROM to a Rogers branded phone, I can no longer connect to any network. I unlocked the phone previously and had been using it on Bell. No, nothing. Not Rogers, Telus or Bell. It worked fine with the ATT pre-rooted ROM but was buggy as hell, so I decided to do a stock Bell ROM. Plus after going t the stock Rogers rom and a factory reset, I can't get to the unlock code screen, either. What did I do wrong?
Dumb Q here, have you checked the APN settings ?
input80 said:
Dumb Q here, have you checked the APN settings ?
Click to expand...
Click to collapse
Not at all a dumb question, but yup.
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
Tried my wife's sim card as well. Everything works but the phone modem.
ok, another dumb Q, have you tried changing the modem itself ? Tried Bell's customer support, they're not all that bad.
[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]-- HTC ONE X+ (S728e) --[/SIZE]
[SIZE=+1]This a short list of frequently asked questions in this device forum and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.[/SIZE]
* * *
[SIZE=+1]Q1: How do I ask a question so I'm not called a "noob"?[/SIZE]While you may see many questions asked in the Development section, PLEASE be aware this is not the place for questions.
Remember to use the search found at the top of the forum. There is also a search within each section. Example click on Q&A HERE. In the upper right you will now see two search's. At the top it says Search All Forums and a little further down you will see Search This Forum. Enter your search criteria in the Search This Forum to get info from this section. The search at the top will look through the entire forum.
Please read as much as you can prior to doing anything with your device.
Make sure your question has not been answered in the OP (Opening Post) of each section of Development
Search Q&A for threads that may have been started for a particular rom.
Take the time to summarize at the best of your knowledge what you are experiencing as problem. (i.e. Phone, stock or rooted, etc.)
[SIZE=+1]Q2: Thanks Button?[/SIZE]At XDA, we have a large number of users that work tirelessly to provide the community with great ROMs, software, advice, and support, and they often do it asking nothing in return except for the occasional donation. Often times it’s reasonable to add a “thanks” in a reply if someone did great work. Trouble is, posts that say “thanks” can quickly clog up a thread and detract from the more in-depth conversation that is going on.
XDA have rolled out an interesting feature on the forum: the Thanks button. Quite simply, if you appreciate someone’s post, give them a Thanks by using the button in the far left position in the User field. Each user is limited to eight Thanks per day (There is a count down from each Thanks you hand out, not the group. Therefore, if you give a Thanks at 17:00, then at or around 17:00 the following day, you will have another one to replace that one), and you cannot undo a Thanks, so only reserve your Thanks for when you really mean it. There are several features in place to prevent people from taking advantage of the system for example, you cannot Thanks yourself. XDA discourage users from soliciting Thanks and they should never be required in return for providing replies or anything else.
Remember, if someone took the time to help you, a Thanks should be given freely and without pressure / obligation to this person, this feature was implement exactly for that purpose
[SIZE=+1]Q3: How do I install ADB and make use of it?[/SIZE]Just follow this tutorial [Tutorial] How to install Android SDK/ADB tool & HTC's drivers [BEGINNER FRIENDLY]
[SIZE=+1]Q4: What is ADB? [/SIZE]Everything you need to know is well explained HERE.
[SIZE=+1]Q5: Which ROM/KERNEL/BATTERY AUTONOMY is the best?[/SIZE]There is no perfect/best ROM. It's all based on personal preference. Do your own test and be your own judge.
[SIZE=+1]Q6: Where should I start to root my phone?[/SIZE]You will first need to unlock your bootloader, install a custom recovery, then rooting will be possible. Please read this HOW TO by hasoon2000. His All-In-One Toolkit can be found Here. (Take the time to thank him if he helped you!)
[SIZE=+1]Q7: Why does the sound of my Bluetooth is so bad, how can I fix this?[/SIZE]Unfortunately to fix this issue you need a rooted phone until HTC release an update to correct this, if it's the case then simply apply the BT Call Fix solution provided by Steve0007 (Take the time to thank him if he helped you!)
[SIZE=+1]Q8: How to mount USB storage in Recovery? [/SIZE]The HTC ONE X+ is a data/media device which is why this function is non-working. More explanation can be found HERE.
[SIZE=+1]Q9: HELP! My phone is boot looping! [/SIZE]You need to extract the boot.img from the ROM you just flashed and to place it in the Platform-Tools folder of SDK. While your phone is boot looping, hold the VOLUME down rocker + POWER button it should reboot in bootloader. Plug in your USB cable coming from your computer and flash the boot.img
Start with this command : fastboot devices (you should see your serial at the screen)
Write this command (if serial is successful) : fastboot flash boot boot.img (Enter)
Clear cache with : fastboot erase cache (Enter)
Reboot with : fastboot reboot (Enter)
Your phone should boot with your new ROM, let your phone sit for ~10 minutes before setting it up.
[SIZE=+1]Q10: How can I achieve S-OFF with my ONE X+? [/SIZE]Unfortunately, this is not a possibility for the moment with this device. This means you have to flash a specific boot.img manually, no RADIO can be flash. Some kernels can be flashed also manually. The reason is simple, no Devs tools are available for the TEGRA chipset (the chipset of the HTC ONE X+) to do so, actually this is only possible on devices with a Qualcomm chipset. You can follow the evolution of this feature in the development thread located HERE
[SIZE=+1]Q11: How do I enter Recovery Mode?[/SIZE]
Make sure Fast boot is Disabled via Settings -> Power -> Fast boot (unticked).
Phone unplugged and in Power Off mode.
Press and hold Volume down while pressing the Power button.
Once in Bootloader navigate with the volume rocker and validate your choice with the Power button.
[SIZE=+1]Q12: What does MD5 checksum means? [/SIZE]MD5 digests have been widely used in the software world to provide some assurance that a transferred file has arrived intact. For example, file servers often provide a pre-computed MD5 (known as Md5sum) checksum for the files, so that a user can compare the checksum of the downloaded file to it. A simple HOW TO is located HERE.
[SIZE=+1]Q13: I've been asked for a logcat, how I do this?[/SIZE]Simply read the Logcat tutorial provided by paxChristos (Take the time to thank him if he helped you!)
[SIZE=+1]Q14: Are International ROM and AT&T / TELUS ROM inter-compatible? [/SIZE]NO! The INTERNATIONAL (enrc2b) version does not have the radio feature called LTE unlike AT&T / TELUS (evitareul) versions. It is important to select the correspondent ROM version of your phone. If you flash the wrong version, your phone will simply boot loop endlessly. To resolve this you need to flash the correspondent version. You will probably need to use the method called sideload to transfert a valid ROM on your SD Card, please refer yourself to Q15 to do so.
More details about : International specs vs AT&T / TELUS specs (see NETWORK).
[SIZE=+1]Q15: How can I ADB Sideload a ROM to my SD Card? [/SIZE]Some situations require the sideloading method to be able to transfer a ROM on the internal memory of your phone, here are some cases :
You flashed a wrong version and your phone is endlessly looping.
You accidentally wiped your SD Card and you already have wiped your phone's ROM.
You wiped your ROM and forgot to transfer a custom ROM.
Or any variant of the previous reason.
Whoever told you to use ADB Sideload.
Here is how to do it :
You absolutely need the latest TWRP RECOVERY (download links below) to use ADB Sideload, at this moment I don't think it is working with CWM RECOVERY...
Download or locate the desired ROM on your computer.
Rename it with a short name.
Place it in the sub-folder : Platform-tools of your SDK folder.
Reboot in RECOVERY
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload Slide to start.
From the command line, type : adb sideload your_rom_name.zip
It can take several minutes to complete the transfer.
╠►TWRP2 Recovery download links : For International model look HERE and for AT&T / TELUS model look HERE.
[SIZE=+1]Q16: How many charge cycles does it take for a ROM to settle down after flashing?[/SIZE]By general experience it is around [email protected] full battery cycles. Which means you have to charge your battery to 100% and then run it down to about ~5% before you start charging again. After the 3rd - 4th cycle your battery should start to improve.
[SIZE=+1]Q17: My battery is draining fast when my screen is off, why?[/SIZE]It is most likely caused by an application that is active in the background, thus draining your battery, learn what is a wakelock.
[SIZE=+1]Q18: I need an original RUU, where can I find them?[/SIZE]
For the International (ENRC2B) version have a look HERE
For AT&T/TELUS (EVITARE_UL) version look HERE
[SIZE=+1]Q19: Several HTC Widgets are missing, how can I fix this?[/SIZE]Go to Settings → Apps → All → Navigate to 'HTC Sense' and tap on 'Clear data'.
[SIZE=+1]Q20: Help!!! I am stuck in bootloader without a ROM installed, what should I do?[/SIZE]Simply follow this guide to load a custom ROM onto your HOX+ device if you have bootloader access.
[SIZE=+1]Q21: Where I can find latest TWRP Recovery?[/SIZE]Simply follow those TWRP2 Recovery download links : For International model look HERE and for AT&T / TELUS model look HERE.
[SIZE=+1]Q22: Everything is working great but I have no Data working?[/SIZE]Probably your APN's are missing.
If you follow this path : Settings -> click on Mobile Data left part -> Access point names -> APN's
Do you have a black screen with only APN'S & Menu on top? If yes, then you need to create an APN to regain your DATA access, just follow these instructions...
How to create an APN... There's two in fact on my HOX+ on TELUS network :
Navigate to Settings -> click on Mobile Data left part -> Access point names -> APN's -> Menu -> New APN -> write in the correspondent field the following for the first one
Name: TELUS SP
APN: sp.telus.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://aliasredirect.net/proxy/mmsc
MMS Proxy: 74.49.0.18
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 302
MNC: 220
APN type: default,hipri,mms
Now Save this via the Menu
For the second one again clicking on Menu -> New APN
Name: TELUS ISP
APN: isp.telus.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: <Not set>
MMS Proxy: <Not set>
MMS Port: <Not set>
MMS Protocol: WAP 2.0
MCC: 302
MNC: 220
Authentication type: <Not set>
APN type: dun
*N.B. ISP is related for tethering mode.
Save via Menu, you are done, just make sure that the first APN is ticked on the APN's screen. Ah yeah I almost forgot, it is always better to reboot your phone after setting up your APN's. It's free anyway!
[SIZE=+1]Q23: Where I can find the original AT&T and TELUS boot.img?[/SIZE]For AT&T model look HERE and for the TELUS model look HERE.
[SIZE=+1]Q24: Where I can find the original AT&T and TELUS recovery.img?[/SIZE]For AT&T model look HERE and for the TELUS model look HERE.
* * *
Forum Rules | New Users Guide | XDA Tour | Report Posts
This FAQ is part of a Recognized Contributor Group Initiative. Please look for a similar FAQ thread when visiting another device forum.
A special thanks to everyone who contributed to the production of this FAQ
Known Issues with no solution yet
What about also adding a thread (or another reply on here) for "known issues" with no known solution or something of the sort. For example:
-Multiple and/or Delayed Texts (AT&T only) - http://forum.xda-developers.com/showthread.php?t=2156386
-Headphone button calls previous call, regardless of any apps downloaded (like Headset Button Control).
-Google Contacts Sync always shows a "double arrow." - http://forum.xda-developers.com/showthread.php?t=2170659
If someone with perfectly working AT&T (or any other carrier for the LTE HOX+ EVITARE_UL only) APN's settings can send them to me by PM, it would be much appreciate. I will then add them to the FAQ
TIA
Lucky Thirteen said:
If someone with perfectly working AT&T (or any other carrier for the LTE HOX+ EVITARE_UL only) APN's settings can send them to me by PM, it would be much appreciate. I will then add them to the FAQ
TIA
Click to expand...
Click to collapse
hi, 2 days back I got HOX+ it's cid is 11111111 but under [ro.aa.cidlist]: [TELUS001] , [ro.aa.project]: [EVITARE_UL_JB_45] . so this is a telus variant device but I'm in India, will I get 4.2.2 OTA update?
I'm worried now .
I also checked my device is S-Off .
thanks for all the info.
gaara6775 said:
hi, 2 days back I got HOX+ it's cid is 11111111 but under [ro.aa.cidlist]: [TELUS001] , [ro.aa.project]: [EVITARE_UL_JB_45] . so this is a telus variant device but I'm in India, will I get 4.2.2 OTA update?
I'm worried now .
I also checked my device is S-Off .
thanks for all the info.
Click to expand...
Click to collapse
as far as i know there's no update for non international version of HOX+ yet, you will have to wait until it's released.
Just to add more for Q18.
The link provided there will direct you to the new link where the files are already moved. But if you want to go directly to download the link, you can go HERE for the international and HERE for the AT&T.
However, downloading RUU from those links are not resumable. I have found one where you can resume your download since it is quite big but only for international version (ENRC2B) and 1 RUU for EvitaRE. But i believe it is updated so there will be more added in the future. You can try it HERE