can any one help how can i fix wifi error on eve 3d coma
wifi issues are a boot image thing. [hint: flash a kernel]
Try flashing a different rom or use your Nano if you have one backed up.
what kernel will i flash?
Well what ROM are you using and what Android version do you have?
android 2.3.3, htc kernel i have just rooted my phone
You can try flashing the Stock kernel here:
http://forum.xda-developers.com/showthread.php?t=1197898
If that doesn't work you can try flashing Synergy which is 2.3.4 here (this comes with a 2.3.4 kernel and the latest build of android):
http://forum.xda-developers.com/showthread.php?t=1193948
If your flashing synergy then make sure you factory reset and wipe the Cache Partiton and Dalvik Cache in recovery.
Same with the stock kernel, except you dont need to factory reset for kernels.
thanks for the link i will try it today
can i use revolutionary recovery on this?
Worm1996 said:
can i use revolutionary recovery on this?
Click to expand...
Click to collapse
Yeah you can use Revolutionary Clock work mod recovery. I been using that ever since I got root with no problems at all.
Related
Need some help and am not having any luck on the forums.
I have an Hboot 1.5 Evo 3D rooted with the Synergy ROM. I have EXT4 files, and a ziggy kernal.
I have had the ROM or 2 months. I overclocked it to 1.8 GHZ the other day and locked the phone up. I kept trying to reboot and when I did it just locked up. I overcloked in SetCPU, and it was checked "set at boot", so I couldn't get it back down. I kept doing this, tried a factory reset in hboot, and now the only thing the phone does is tries to boot the rom and gets stuck after about 30 seconds.
What can I do? Is this phone fried? I tried to use the command prompt on my computer and can't get anything to communicate with the phone via fastboot USB. Answers needed as I have had a non functioning phone for 4 days. An answer or a link would be greatly appreciated.
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Theonew said:
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Click to expand...
Click to collapse
Can't get into clockwork mod recovery to do that. Don't know what the problem is but I am about to just run this thing over and take it to Best Buy.
bgdog86 said:
Can't get into clockwork mod recovery to do that.
Click to expand...
Click to collapse
Reflash ClockworkMod recovery then, via fastboot. Use this: http://forum.xda-developers.com/showthread.php?t=794638.
Someone please help!!?! I cannot for the life of me flash a ICS rom. I have tried various methods but all to no avail. I have an Evo that I bought some time ago, rooted some time ago using HTC's bootloader unlock and then used adb to flash recovery and su to the phone to gain root. I have flashed many if not all sense roms no problem but now that I am wanting to flash an ICS rom It just won't let me. No matter the recovery I use after flashing an ICS rom it stays stuck on the first splash screen and will not load custom ICS rom. I have wiped all caches did factory resets and whatnot but still have not been able to flash an ICS rom
Any help would be greatly appreciated
Have you tried 4ext with smartflash?
ics
Hello are you using a super wipe tool after wiping cache and dalvik battery stsats then format system and format data and format boot and format all partitions except sd card and when this is done now use the super wipe tool and when its done it will reboot back in recovery and now you can flash any ics rom these are the steps i use with no problem's and yes 4ext is highly recomended
You're S-ON, you need to either use 4ext w smartflash or Joey Krim's Flash Image GUI in order to flash a kernel for ICS.
S-ON does not allow for flashing kernels except in fastboot mode, with 4ext/smartflash which was introduced 2 days ago evidently, or Flash Image GUI.
Easy fix
Thanks everyone. I finally got it to work using 4ext. I was so dead set on keeping twrp that I forgot to look for other recoveries.
Sent from my PG86100 using XDA App
I flashed the leaked ICS RUU, and I'm S-Off. I'm now running Energy's 2.1 ICS ROM, and I want to try different ICS ROMs. If I were to flash the Android Revolution ICS ROM, would I need to go back to stock ICS?
I know if I want to flash Energy's 2.2 ROM, I'd just flash it over my current 2.1 ROM.
I think you just need to flash super wipe script then flash the android ROM.
Oh okay, cool. Also, do I absolutely NEED 4EXT to flash this, or is Xboarder's 5.5.0.4 recovery okay?
4ext is needed, dont use CWM
or at least highly recommended
punkmetalska said:
Oh okay, cool. Also, do I absolutely NEED 4EXT to flash this, or is Xboarder's 5.5.0.4 recovery okay?
Click to expand...
Click to collapse
you need 4ext to flash mikes rom but xboarders recovery worked fine for energy and speedrun for me.
CWM CAN NOT FLASH KERNEL IN RECOVERY.
4ext takes care of it. You don't HAVE to buy the app. 4ext also has wipe menu with format all partitions (except sd card) option which works the same as superwipe.
Rule of thumb, its always best to backup and wipe whenever you switch between ROMs for a clean install (unless u are flashing an update of your existing ROM). It doesn't take more than 6 minutes to backup and wipe. It's always worth it and you can always advance restore /data from a backup if needed
Sent from my iced out HTC Ruby
I have an evo v 4g on virgin mobile, which is an evo 3D. I had rooted the device and installed the midnight rom. All was well and eventuallly I got bored of that rom and decided to switch to the stock rom. Everything was still fine. Then I decided to install the "king kang" rom. I didn't read the tutorial very well. It warned me not to install if I was on HBOOT 1.5. Turns out I was and I got stuck in a boot loop. I was able to boot into fastboot and then enter teamwin recovery. I attempted to wipe cache, wipe dalvik cache, wipe all (factory reset), and then flashing the stock rom again. No luck. Still had a bootloop, only now it shows the virgin mobile logo until it restarts. I have also tried doing the wipes and then restoring from the backup I made before installing any roms. Can someone please help me figure this out? I am S-ON and have HBOOT 1.57.
Think you might have to flash the stock kernel after returning to stick ROM, at least I did it to fix a bootloop.
Sent from my shooter using xda premium
How would I go about doing that?
kodonnell204 said:
How would I go about doing that?
Click to expand...
Click to collapse
You'll have to flash boot.img through adb with fastboot commands.
Sent from my SlimRom jb'd EVO 3D.
aqualls said:
You'll have to flash boot.img through adb with fastboot commands.
Sent from my SlimRom jb'd EVO 3D.
Click to expand...
Click to collapse
Could you give me a list of steps I need to complete for me to do this? I've tried doing my research but it didn't help. Wouldn't flashing the stock rom automatically flash the stock kernel?
Hi , i have a HTC EVO 3D GSM.
I just tried to flash VIPER3D 1.6.3[sense 4.1] with ROM Manager , i wiped all the data and cache but when the installation finished and phone rebooted , it was again in the SENSE 3.6 but all my apps and stuff were deleted.
Does any one has a clue what to do to flash correctly viper3d ??
gentrithumolli said:
Hi , i have a HTC EVO 3D GSM.
I just tried to flash VIPER3D 1.6.3[sense 4.1] with ROM Manager , i wiped all the data and cache but when the installation finished and phone rebooted , it was again in the SENSE 3.6 but all my apps and stuff were deleted.
Does any one has a clue what to do to flash correctly viper3d ??
Click to expand...
Click to collapse
Try flashing it via bootloader not ROM manager
donkeykong1 said:
Try flashing it via bootloader not ROM manager
Click to expand...
Click to collapse
I flashed again with 4ext in recovery mode , but now it doesn't boot.It reboots when it says system confirmed... :S:S:
Did you wipe everything? I wipe cache, dalvik cache, do factory reset and then wipe everything except memory card and then flash ROM
Sent from Mwakious powered EVO 3D using Tapatalk 2
What HBOOT version are you. and did you use the cdma or gsm version of viper?
TehJibba said:
What HBOOT version are you. and did you use the cdma or gsm version of viper?
Click to expand...
Click to collapse
I'm on HBOOT 1.53.7777 and i used the GSM version.
If i remember right ( i used the cdma version for a bit) i think you need to be on hboot 1.58 in order for it to boot. I could be wrong tho
TehJibba said:
If i remember right ( i used the cdma version for a bit) i think you need to be on hboot 1.58 in order for it to boot. I could be wrong tho
Click to expand...
Click to collapse
Do you know how to upgrade or downgrade hboot , so i can boot again because now im on bootloop.
gentrithumolli said:
Do you know how to upgrade or downgrade hboot , so i can boot again because now im on bootloop.
Click to expand...
Click to collapse
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
TehJibba said:
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
Click to expand...
Click to collapse
OK , i'll try it now , hope it works !
TehJibba said:
**EDIT** after reading the latest posts it should work with your current hboot. If you are s-on then try going to 4ext recovery then tools > enable smart flash
also make sure u do a full wipe of everything except the sdcard and then wipe cache-dalvik too then flash the rom
Click to expand...
Click to collapse
EDIT : It didn't work for that . do you know any ROM that works with hboot 1.53.7777 just to boot my phone ?
[SOLVED] with PG86IMG.zip.
For those who have same problem as mine , you just have to download this file and put it in the sd card , reboot in to booloader and wait for the "pres volume up/down" thing , update the hboot and than you will have hboot 1.49.
THANK YOU ALL WHO HELPED ME.