Hi
Tried to update my galaxy 5 i5500 (europe) model with Cyanogenmod 7.1 but after the reboot the phone was stuck on the boot loop.
When i try to flash the orginal firmware from samfirware i only choose europa_v1.0.ops and then the tar file for my phone, i need to uncheck the one package first then check it again so the "one package" button is marked and ready to load the file if i don´t do it its grayed. I don´t load the files manually like the mds files who i read need to be loaded separate, like boot,phone,pda.
Just take the whole tar file and load it through one package button.
Then i press start and the phone starts to flash, after a while i got to the reboot screen when i should press on the phone reboot i cant move around here just press reboot i can do.
After that the phone boots up and i see the orginal starting logo for android 2.2 who was on it when i bought it but the phone still stucks on the android logo?!?
Anyone can help me whats wrong? tried to go down to android 2.1, still stuck on boot logo after reboot.
Odin alwAYS says big partition size but countinues anyway when i got to the first reboot menue when i should press the center button to accept reboot i see there is a error on f: who it says but maybe that dosent matter...
But then when its done i have the reset at 200sec the phone stucks on logo.
I have deleted everything on the sd card and tried again with flash with odon same result.
I can have the phone in download mode so that works anyway, but could anyone guess what could be the problem, tried different europe 2.2 versions no luck same logo , and all after the cyanogenmod who failed .
Is the phone bricked or do i do somthing other wrong here?
Same problem here
m also facing the same problem, im not liking cynogen mode for galaxy5. someone please tell me how to flash with froyo
Your phones are not bricked, but in order to get back from CM to stock firmware you will need first of all to upload this file using ODIN multiupload.com/OW3LQG8PZB
I really think this will help you in solving your issue. At least this tip worked more than once for me.
Sent from my GT-I5500 using xda premium
Finally no boot loop for me. i needed to manual load the files boot,phone,pda and so on with files.. not so easy to find them.
When i tried alot of "one file tar files" and choose one package as install way. boot loop was there everytime i think i got the mds files from a english android 2.2 version and then loaded every file manual and unchecked one package, boom then the phone started up again finally!
Can i now flash the phone with a one package file?
like the GT-I5500YKANEE "Sweden" because my phone is Swedish, or should i leave it with the english version on the phone?
the downgrade procedure
chillvisio said:
Your phones are not bricked, but in order to get back from CM to stock firmware you will need first of all to upload this file using ODIN multiupload.com/OW3LQG8PZB
I really think this will help you in solving your issue. At least this tip worked more than once for me.
Sent from my GT-I5500 using xda premium
Click to expand...
Click to collapse
===============
if you could tell me the downgrade procedure it would have been a great help for me.
m not a tech savvy
@ajesh
Sure, it's already been documented by CM7 developer right here http://forum.xda-developers.com/showthread.php?p=15290648#post15290648 All I have to add to psyke's explanation is that you will need to unarchive the .rar file (not the .tar itself) before uploading with Odin as Odin need a .tar file for one file upload and it can not read .rar files.
@dragonevo
Ja visst, you should be able to upload whatever firmware you want and if you ever get stuck again at boot screen after downgrading from CM to stock firmware, do not hesitate to follow the procedure with I5500-2.0.9-Downgrade.tar file.
If i want to try to flash it again i still need to fix clockwork first on the phone?
I cant flash the Cyanogenmod file direct by odin?
dragonevo said:
If i want to try to flash it again i still need to fix clockwork first on the phone?
I cant flash the Cyanogenmod file direct by odin?
Click to expand...
Click to collapse
Everytime that you want to get back to CM you will have to install ClockworkMod first as you need its recovery in order to update firmware using a .zip file. Then if you are going back to stock firmware you will need to upload the Downgrade file via Odin so it could format your system partition with RFS file system.
chillvisio said:
Your phones are not bricked, but in order to get back from CM to stock firmware you will need first of all to upload this file using ODIN multiupload.com/OW3LQG8PZB
I really think this will help you in solving your issue. At least this tip worked more than once for me.
Sent from my GT-I5500 using xda premium
Click to expand...
Click to collapse
Chilvisio thanks a lot i have a galaxy s and that never happesns to me (be stuck in bootloop), my wife was screeming on me about that, but now we cool, thanks!
i dont know why but my g5 just says welcome to gti5500 and when i touch the android it doesnt start.. I flashed it two times and wiped data.. whats the problem?
EDIT:Now i flashed the old version and it even wont show the bootlogo....
SH*T! i need help, please
ADDITION: first i was on cm 7.1 v1.3 it worked fine, then updated to v1.4 stuck on welcome to gti5500 touched android 300 times couldnt get out of it, flashed v.1.3 again just shows samsung logo then android text then stuck...
tried it with NANDROID Backup CM 7.1 v1.3...md5 mismatch??
EDIT: GOT IT YEAH !!! installed cm 7.1 v1.4.. than at welcome to i5500 tapped all four corners and then touched the android
stuck on samsung logo
i have a same prob. so plz help me from where i found this file.........coz this file isn't avileble on multiupload.com/OW3LQG8PZB..................plzzzz help....
Search Google for OW3LQG8PZB and then go to the homensdoamanha.com link (about the 3rd one down). Use Google Chrome to translate the page from Portuguese, or Google Translate if you don't have Chrome installed.
About 1/2 way down the comments there are some more links to possibly OW3LQG8PZB or equivalent files.
I've not used/downloaded the file myself as I just flashed my Europa with an older firmware to get it out of the boot loop, but you may not be prepared to try that.
The first link on the page for the ROM file (in Portuguese it says "Firmware: Clique aqui!") takes you to an advert page. Look in the top right corner and it will say "skip ad", and will then take you to the file on Rapidshare.
Sorry about the cryptic remarks about the file/link locations, but the forum is overly user-unfriendly to new registrants. There's quite a lot of good info on here, but it doesn't inspire me to contribute much... I wonder how many others have been put off too?!
Hope it helps you.
Andy.
cookiekpop said:
Search Google for OW3LQG8PZB and then go to the homensdoamanha.com link (about the 3rd one down). Use Google Chrome to translate the page from Portuguese, or Google Translate if you don't have Chrome installed.
About 1/2 way down the comments there are some more links to possibly OW3LQG8PZB or equivalent files.
I've not used/downloaded the file myself as I just flashed my Europa with an older firmware to get it out of the boot loop, but you may not be prepared to try that.
The first link on the page for the ROM file (in Portuguese it says "Firmware: Clique aqui!") takes you to an advert page. Look in the top right corner and it will say "skip ad", and will then take you to the file on Rapidshare.
Sorry about the cryptic remarks about the file/link locations, but the forum is overly user-unfriendly to new registrants. There's quite a lot of good info on here, but it doesn't inspire me to contribute much... I wonder how many others have been put off too?!
Hope it helps you.
Andy.
Click to expand...
Click to collapse
i had updated-cm-7-20120427-MADTEAM-galaxy5-signed to ma galaxy 5.i had some wifi nd sound issues so i downloded hotfix 1 nd hotfix 4 for it.but after booting
my fone is not starting.it shows the cynogenmod logo again nd again..i tried rebooting via odin to rebbot it again but it shows error Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
I even tried by changing the usb port.
plzz help wht to do..plzz
@nileshpandey84,
Go to download mode by pressing volume down+center button+power and plug it in to the pc....
( Btw how will u reboot your phone using odin !!? )
If that doesn't work reboot your pc and try again.
Sent from my GT-I9300 using XDA
Same problem (almost!!)
A while ago something went wrong when flashing my phone to cyanogen mod 9. So when I booted up my phone it got stuck on the GT-i5500 logo. Now (after what seems ages of re-flashing and one click unbrick) it displays Phone---(!)----PC.
Is that good or bad?
Odin can't flash my phone either, it just gets stuck on setting up a connection or it just comes up with fail. One click unbrick doesn't work either.
HELP!!
It's a common situation. Just remove battery, restart winz if you already tried to flash once into this session, start Odin, put battery into the phone and connect it to the PC.
Usually for me it always worked this way.. the ! means that a flash process is been interruptes manually or maybe for unknown reasons (file corrupted? )
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk2 }
nileshpandey84 said:
i had updated-cm-7-20120427-MADTEAM-galaxy5-signed to ma galaxy 5.i had some wifi nd sound issues so i downloded hotfix 1 nd hotfix 4 for it.but after booting
my fone is not starting.it shows the cynogenmod logo again nd again..i tried rebooting via odin to rebbot it again but it shows error Download Start...
--- cannot open the usb serial port. code: 32
I even tried by changing the usb port.
plzz help wht to do..plzz
Click to expand...
Click to collapse
Did you install the right hotfix for your version? Every release has different hotfix!, and you have to install ONLY the last one available for your version.. so if psyke released hotfix-XXXXXXX_01 and hotfix-XXXXXX_02 you must install only the 02 ones..
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk2 }
Same problem, the screen blinks on boot
Hi,
I have a problem similar (or the same) as the one in the first post.
I have a Samsung Galaxy 5/Corby, I5500, the operator is TIM (Italy). I've rooted it, then installed MAD Manager, installed ClockWorkMOD and flashed the last version of CyanogenMod. It worked quite good, the only thing that didn't work was wireless tethering. However, it was very slow, because of the small RAM. So I decided to shrink the main SD partition and add a little SWAP, then enable the apposite option in the Advanced tab in Settings. But, after a reboot, it din't swapon the partition. So I enabled ADB and (throught Linux) opened a root shell and ran "swapon /dev/block/xxxxxx#p#". It worked. But I didn't want to open an adb shell or a terminal after every reboot to enable swap. I googled a bit, then read somewhere that a /system/etc/init.d script might have done the trick. So I made a little script with my PC:
Code:
#!/system/bin/sh
swapon /dev/block/mmcblk0p2 || echo "Unable to enable swap, please insert the SD card."
sysctl -w vm.swappiness=60;
then pushed it into /system/etc/init.d/83swapon
The filesystem is read-only
Click to expand...
Click to collapse
I remounted /system in rw, and tried again.
No space left on device.
Click to expand...
Click to collapse
I removed Apollo, a media player included with the rom I downloaded, and tried again, getting again "no space...".
After a bit of hacking I decided to put the script into /data, then make it executable and make a symlink in init.d that points to it.
I didn't manage to remounte read-only /system, so I didn't remount it at all.
I rebooted the phone to check that it was working, but the screen started blinking. The only thing I was able to do was removing the battery then starting it in download mode by pressing Volume down, Center and Power.
I've made a video: youtu.be/SM7dXfCa4dI
I tried to flash the stock Samsung ROM using ODIN, but ODIN makes it reboot and blink again. I don't know what to do, the link in the fourth answer doesn't work... can someone reupload that file or suggest me a better solution?
Thanks
Related
Im having some issues with my x10i that i put Nordic 2.1 on a few weeks ago.
Some apps fail to open every now and then, and the stock android alarm doesnt work (the app seems fine, but when the alarm goes off there is no noise, yes ive tried volume etc, yes ive tried downloading a 3rd party alarm)
So id like to put a fresh 2.1 rom on, ive tried these:
http://forum.xda-developers.com/showthread.php?t=825675
http://forum.xda-developers.com/showthread.php?t=827065
But i cant get them to work, the .bat files of the flasher fail at the connection stage (2nd step after selecting windows vr)
Im having a lot of problems,, main one is that i cant install the driver for the x10 in flash mode, windows cant find the driver.
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10), id be happy to donate $20USD into your paypal account
Ok let me see if I can help you a title here....
1. Root your device using this http://forum.xda-developers.com/attachment.php?attachmentid=453551&d=1291188836 its really simple and fast...
2. Once you've root your device use this application http://www.mediafire.com/?ewf9e41ybw2eazz
to install the Xrecovery menu on your phone... It's very simple as well....
3. Download this file http://hotfile.com/dl/87564842/7e80127/SE_update-shipped-full.zip.html
and save it to your SD Card into any folder you want, I recommend you to do it in a new one with any name you want, that will make easier the next step...
4. Reboot your phone and right after the white letters with Sony Ericsson logo appear press the back key a few times , if the Xrecovery menu has been installed correctly you will see a weird image of and Android with troll face lol... and a bunch of options like reboot, install update zip etc....
5. Choose Install Custom Zip and then go to the folder you created with the downloaded zip file... from step 3... Then select it and click in yes... Wait for a few minutes and when the phone tells you done click on reboot and wait for the firmware to load...
6. Enjoy the SE 2.1 firmware with JIT enabled.
7. Read your inbox...
Jimmy
Sent from my AOSP on Xperia (Guatemala)
Siddy1200 said:
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10)
Click to expand...
Click to collapse
Put XP in safemode, run seus, put phone in flashmode when prompted so it installs the drivers, try the flashtool again, while in safemode on XP.
Or if you'd rather go for something simpler.. try rooting (if you haven't already) then follow this - http://forum.xda-developers.com/showthread.php?t=828163 to flash to global generic.
i cant even get the phone to tunr on atm, but if i get it to work ill send $20 ur way jimbo, thanks everyone
jimbo, actually your links are broken so i cant follow your guide cause u just say "use this application" - but link is down
ok, i found a new link for that one, but i cant install it cause when i connect my phone to the pc, it just starts charging, it wont mount the sd??
"If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp..."
ok i put xrecovery on the sd card through a pc, installed the app and ran the app, clicked Install Xrevovery, error
already have root access, xreovery was granted superuser, but doesnt work
tried the new root app just in case, it just switched off my phone... none of this works
does anyone live in Sydney and can do it for me????
Have you installed BusyBox too?
Hi all 1st post here and it's already a question so I apologize, , I am pretty new this stuff and recently started messing with my firmware and having a play around. Now the issue I have is I cannot connect the phone to pc by usb at all. I have tried all the usual methods of switching data cables, hard reset, enabled/disabled debugging. The only thing that it does is charge the phone.
On a seperate note, I think my current version of android is corrupt as when i hold down the power button, the only option I get is power off, various other things are not quite right either and would prefer stock to this. The device is rooted using universal androot. If anyone could help me return to stock or change my firmware would be greatly appreciated. Please bare in mind that I am unable to use usb, so kies and odin are just not an option. Many thanks
the information i have is.
PDA: - I5500LUYJP2
PHONE - I5500LUYJP2
CSC: - I5500LAROJP2
The kernal version says
2.6.32.9-perf
tyoon hwang SEP-04 #2
Running 2.2 android
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Many thanks for the reply, I was a little naive and just downloaded a random linked one Am I able to put the madteams on there just from sdcard?
If you mean install it from sdcard using clockworkmod?
Use this one : http://www.madteam.co/forum/development/(re-release)-motafoca-froyo-2-0-9-rom-clockworkmod-edition/
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
I don't even get the dialog to connect by kies or mass storage. I plug my phone in and the only thing it does is charge. The computer doesn't even acknowledge there is a device connected, with that in mind i'm certain it is a problem with my phone. Possibly firmware related, or faulty usb phone port I would guess.
Which is why I really hope someone can come along and help with my previous problem of fixing things with sdcard only.
Shady27 said:
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
Click to expand...
Click to collapse
Jordanooo said:
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Click to expand...
Click to collapse
if you're wanting to use odin to flash, use that rom i said. download both files from the 'full edition' and extract them
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
to flash:
1. download kies
2. download odin
3. download your files for the rom
4. put them all into odin
5. turn phone into download mode and connect to pc
6. wait for it to show up on odin
IF, your phone doesnt show up, try uninstalling kies, re-installing it, restarting your computer and try again
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Should be a rom.problem..flash other rom..if odin shows yellow light below com port in odin it means you are ready to go..flash another rom and see if it helps..but if yellow light doesnt display theb its data cable prob or usb port prob..
Sent from my GT-I5500 using Tapatalk
Shady27 said:
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Click to expand...
Click to collapse
So you already have clockworkmod installed?
Jordanooo said:
So you already have clockworkmod installed?
Click to expand...
Click to collapse
I used universal androot and I used an app called 'rom manager' which says it installs clockworkmod recovery. i havnt ever used odin to install.
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Jordanooo said:
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Click to expand...
Click to collapse
It may not have installed correctly which is how I managed to ruin my phone, but according to rom manager it did install I never got the chance to check tho as my phone is now dead and hoping to get it fixed under warranty.
you probably installed a version for another phone. If you can, boot your phone into download mode and install clockworkmod found here: http://www.madteam.co/forum/development/(development)-ltsecret-projectgt/
Then, hopefully your phone should be ok, but just to be sure, install the latest cyanogenmod (using clockworkmod).
Hope this helps
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
sry for the fast answer i didn't read correctly,
i just edited this for those who dont know what im talking about,
did you try to flash to stock, your not using a stock rom as i can see in the picture
cabloomi said:
I'M NOT HOLD RESPONSAPBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE
BY FOLLOWING THIS GUIDE YOU AGREE TO THE TERMS
HERE THESE ARE STOCK ROMS, WHAT YOUR USING IS NOT EVEN FLASH ABLE VIA ODIN (I THINK)
1. DOWNLOAD OLD BOOTLOADER
2. FLASH OLD BOOT LOADER BY
1. OPEN ODIN
2. CLICK BOOTLOADER BUTTON AND CHOOSE THE RECENTLY DOWNLOADED BOOTLOADER
3. TICK PHONE BOOTLOADER UPDATE
4. THEN CLICK START
>>>>PROBLEM SOLVED<<<<
Click to expand...
Click to collapse
Dude... he has an SII HD LTE. (E120L) Which has different CPU/SoC/GPU than the I9100.
I am about 95% certain I9100 firmwares will NOT WORK on his phone, and may, in fact, make his situation worse.
---------- Post added at 11:28 AM ---------- Previous post was at 11:15 AM ----------
vdbergh said:
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
Click to expand...
Click to collapse
First off, do NOT follow that guy's advice above, unless you want to brick your phone.
Second, try reading/searching this thread. I myself did a quick perusal of it and found that someone in it mentioned that they were able to root their E120L or S by flashing Tegrak kernel. Search around for it.
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
ctomgee said:
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
Click to expand...
Click to collapse
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
vdbergh said:
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
Click to expand...
Click to collapse
I would get the latest firmware available via CheckFUS. (if you don't know what that is, just google it) Then flash it via Odin. Let's start there.
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
cabloomi said:
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
Click to expand...
Click to collapse
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
vdbergh said:
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
Click to expand...
Click to collapse
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
ctomgee said:
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
Click to expand...
Click to collapse
Thanks for your help ctomgee, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
vdbergh said:
Thanks for your help cabloomi, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
Click to expand...
Click to collapse
Please don't get me mixed up with cabloomi...
Thanks for your help, Ctomgee...
The problem that I couln't enter download mode or root my phone is solved with your help.
I still have a probem with the radio/basebad, but I'll post that in another thread.
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
usm125 said:
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
Click to expand...
Click to collapse
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Shrewdy said:
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Click to expand...
Click to collapse
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
usm125 said:
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
Click to expand...
Click to collapse
I am not sure... but you can try this guide here ...
http://forum.xda-developers.com/showthread.php?t=1840030
Since it is already bricked... you can take all the chances to revive it....
And i searched on the internet and there is a lot of stuff available for Qhsusb_dload Mode you mentioned above.... take the chances ...:good:
my dear the link you send me is for those phones whose are getting into download mode and turned on. but my phone is dead. bettry is charged.but when ever i am connecting my phone to pc.it does not shows me in odin. the drivers and every thing is properly installed. i needs some one's help who is understanding about my problem. my device is hard brick. it is not going to turn On. also not going into any download mode or recovery...i know there is no way without jtag. but currently jtag is not in my range. so i want turn on it my self. there is alot of members who is eligible to solve my problem. but i think they are busy some where that's why they are not helping me. but i am still waiting ....
Motheboard replacement or JTAG.
MistahBungle said:
Motheboard replacement or JTAG.
Click to expand...
Click to collapse
i am sorry to say but there is a members who can able to fix these problems have a proof take a look here
http://forum.xda-developers.com/showthread.php?t=1914359&page=10
the member name darkspr1te is able to fix my problem and the member E.V.A Too.
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
MistahBungle said:
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
Click to expand...
Click to collapse
i already said in my post if the people's who dont know about my problem should not reply in my thread,
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
MistahBungle said:
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
Click to expand...
Click to collapse
These Things Are Not in MY Range.
Then your phone stays busted *shrugs*
MistahBungle said:
Then your phone stays busted *shrugs*
Click to expand...
Click to collapse
i needs help not a sadness..
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
I have found the KERNEL SOURCE under the "Open Source Code" here: http://www.vodafone.com/content/index/about/what/devices/smartprime6.html !!!
Thanks in advance!
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Can you boot to fastboot/download mode?
Try to use ADB to restore the stock ROM files, unfortunately I don't know where to find the stock ROM files
Sent from my VF-895N using XDA Free mobile app
Please help
trentinmarco said:
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Click to expand...
Click to collapse
i bricked my smart prime 6 aswell do you know how to use the sorce code?
Num3 said:
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
Thanks in advance!
Click to expand...
Click to collapse
Hi,
sorry to read that, actually I got this phone from a friend who lost mine (here in Czech Republic) and I did root it, but I saw that many people had problem after rooting so I un-rooted and at the moment it's working properly... I think there is also this "Purify" maybe it did mess with the rom uninstalling things or who knows what...
I hope you find the way to restore the software...
Hi guys i m looking for rom for this phone as well i have 2 phone after i update phone phone stuck now can some one give me firmware for this phone plz
Hey, I bricked this phone as well
any stock rom to download and flash in recovery?
please, thanks a lot
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
dragontass said:
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
Click to expand...
Click to collapse
I need too
Plus88 said:
I need too
Click to expand...
Click to collapse
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Plus88 said:
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Click to expand...
Click to collapse
Many thanks - it worked perfectly! :good:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
could you explain in more detail how you shorted the phone please iv bricked my v895n
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
peraoterangi said:
Click to expand...
Click to collapse
Hi,
What exactly is:
"Short the test point next to the sim card holder to ground"
dragontass said:
Many thanks - it worked perfectly! :good:
Click to expand...
Click to collapse
Can someone help I went on the link provided htcmedia and download the unbrick zip when I used suger flash tool it got stuck at 2 percent does anyone have password or can post steps on how you got to work thanks guys u da best
Should I put my phone in download mode when connected to sugar qct-sp when I press upgrade because I get to 2percent even after 15 mins didn't budge I hope someone can help
If you try to root with KingRoot, works. But follow the next steps:
-reboot your phone into recovery mod using POWER BUTTON + VOLUME UP BUTTON
-next select english using POWER BUTTON
-next select "WRITE PROTECT SWICH" and select "set write protect off"
-now reboot your phone and start the KingRoot and Root.
-Now your device is rooted.
I need a stock ROM so badly. I removed some system apps I don't use but now I can't update.
Here's the log:
nstalling zip file '@/cache/recovery/block.map'
Installing zip file '@/cache/recovery/block.map'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
sysutil: mmapped 19 ranges
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
sysutil: mmapped 19 ranges
Verifying current system...
failed to stat "/system/app/Calendar/Calendar.apk": No such file or directory
file "/system/app/Calendar/Calendar.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: "/system/app/Calendar/Calendar.apk" has unexpected contents.
"/system/app/Calendar/Calendar.apk" has unexpected contents.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '@/cache/recovery/block.map'
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
What you mean "Short the test point next to the sim card holder to ground." Sorry, I not understand! Can you show a picture please!?
1st custom ROM for VF-895N: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/