[Q] How to disconnect S2 from PC - Android Q&A, Help & Troubleshooting

Hi
I connect my S2 to PC via USB but then I want to disconnect it from PC where are no choise "Enject something...." How to disconnect phone properly?

Did you try this, windows. Click Start. Click computer. Right click on the respective drive associated with the phone, choose eject
Sent from my SAMSUNG-SGH-I897 using xda premium

I tried but there is any similar choise to this to pick. Any suggestion more? I forgot I use W7 x64.

Related

Phone not recognized

Hello im trying to use my tbolt as a mas storage device but my computer wont recognize my phone but when i try using the htc sync it will work any ideas tried uninstalling htc sync and the drivers but no luck any ideas on how i can get my computer recognize my phone as a mass storage by the way im using xp sp 3.
No guarantees, but have you tried downloading the android sdk and choosing to install the usb drivers?
letzgostate said:
No guarantees, but have you tried downloading the android sdk and choosing to install the usb drivers?
Click to expand...
Click to collapse
i think i tried already but not sure ill try with the android sdk again.
Did you install all the drivers that are on the cdfs partition when you plugged in the phone?
Sent from my ADR6400L using XDA Premium App
You need to download the sync drivers.
http://www.htc.com/us/support/thunderbolt-verizon/downloads/
ScoobarSTI said:
You need to download the sync drivers.
Click to expand...
Click to collapse
Those are the sync drivers im using but no luck yet tried to uninstall and reinstall but no luck.
nerozehl said:
Did you install all the drivers that are on the cdfs partition when you plugged in the phone?
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
On this one i think i installed all them the issue here is that when i plug my phone it let me know that new hardware has been found then it starts with the installation some will install but i think there is one or two the just sit searching but nothing happens and then i try to closed out but it freezes up on me and when i turn off debugging then it closes out but if i try to install them with debugging off nothing comes up.
another thing i used my phone with acomputer runnig windows 7 and it worked so im guessing its a prblem with xp
I think pdanet has the drivers when you install it if you don't know how to manually add them.
Sent from my Thunderbolt using XDA Premium App
I don't know if this will work for you, but it worked for me...
When you plug your phone in via a usb cable, you will see a Verizon Mobile drive pop up on under "My Computer"
If you open it, there is a folder in there called DRV. There is a file called something like WM_driver installer. I installed that.
Then I go to my phone chose to connect as a disk drive (I have mine set to charge only by default).
Then I click on my removable disk and I can see my phone's data then.
Dnakaman said:
I don't know if this will work for you, but it worked for me...
When you plug your phone in via a usb cable, you will see a Verizon Mobile drive pop up on under "My Computer"
If you open it, there is a folder in there called DRV. There is a file called something like WM_driver installer. I installed that.
Then I go to my phone chose to connect as a disk drive (I have mine set to charge only by default).
Then I click on my removable disk and I can see my phone's data then.
Click to expand...
Click to collapse
ill try it tonight lets see if it work

How to copy files from PC to S3?

I´m new to this Mtp thing. I had a HOX until now and that was a breeze there.
So how is everybody copying files (non-media files) to sd-card pr ext-sd-card?
thx, nearly
Bro I just plugged my phone into my PC and my PC download the drivers needed.. recognized phone and bam. Go into computer and find your device. If you double click on it it should bring up your SD card.. From there I just drag and drop files.
sent from my Galaxy S III
Just like a USB stick. I connect to PC and it pops up. Maybe because I.have development option ticked but don't think it's that. Just download the latest version of kies for the drivers.
Sent from my GT-I9300 using xda premium
That sounds less painful than the galaxy s II
Setting-blah-blah-mount-connect-enable-driver-drag files-eject-turn off
I use airdroid.
Sent from my GT-I9300 using Tapatalk 2
How is MTP speed compared to UMS?
ECrispy said:
How is MTP speed compared to UMS?
Click to expand...
Click to collapse
Really sucks...
Can't use the phone while transferring large files
What about connecting the phone to a PS3, does that work?
i cant remember the last time i connected a phone to a computer for file transfers.
get samba share from the market or use es file explorer to transfer files to network shares on the pc.
LOL WIRES.
MTP/Kies really suck. My main pc is running Linux so that's a no-go with MTP. I installed Kies on my work pc as it runs Win 7. All SGS 3 drivers are installed as well. For the first few days it was working but now the phone isn't recognised anymore. Either the phone does not show at all on the pc, or it shows but the internal and external SD cards are not showing.
Saw on Samsung's website that there's a Kies version for Mac available so I installed that on my wife's macbook pro. When plugging the phone in the "connecting" message keeps running but the phone never connects. I thought it was because I'm not using the original USB cable, but using that won't work either.
So looking forward to a custom rom that has USB mass storage included. Until then I'm using the WiFi File Transfer Pro and/or Samba Sharing apps.
You can also install Kies Air from the play store on your phone. You won't have to install anything on your PC.
Just make sure you are on the same network as your PC and run the app.
It will start a server and the URL will be displayed on your device.
Enter this URL in your browser on the PC and you are ready to go
KennyG60 said:
You can also install Kies Air from the play store on your phone. You won't have to install anything on your PC.
Just make sure you are on the same network as your PC and run the app.
It will start a server and the URL will be displayed on your device.
Enter this URL in your browser on the PC and you are ready to go
Click to expand...
Click to collapse
So basically it works like WiFi File Transfer Pro?
Thats nice, it creates a network share of the sdcards?
Why hasnt anyone else done that?
Sent from my LG-P920 using xda premium
slonn said:
So basically it works like WiFi File Transfer Pro?
Click to expand...
Click to collapse
You can browse your entire phone, not just transfer files
KennyG60 said:
You can browse your entire phone, not just transfer files
Click to expand...
Click to collapse
Ok, will give it a go. Thanks!
You're better off using airdroid if it's just a couple of files
Sent from my GT-I9300 using XDA
How can I copy file to /data directory?
I use Cyberduck on my Mac to connect to the SGS III by SSH, I have an app called SSHDroidPro on my phone. So easy to use. I can browse the entire filesystem of the phone wirelessly and file transfer is pretty fast and totally painless. MUCH better than Kies Air IMO.
Coreym said:
Bro I just plugged my phone into my PC and my PC download the drivers needed.. recognized phone and bam. Go into computer and find your device. If you double click on it it should bring up your SD card.. From there I just drag and drop files.
sent from my Galaxy S III
Click to expand...
Click to collapse
I can just copy jpgs, nothing else.
Coreym said:
Bro I just plugged my phone into my PC and my PC download the drivers needed
Click to expand...
Click to collapse
Only with Windows 7 in my case, wouldn't work with XP

Samsung Galaxy S3 not recognized (with drivers)

I have installed Samsung USB Drivers manually and also tried Kies to install the newest drivers, but my Samsung Galaxy S3 still isn't recognized by my computer. What can I do?
EDIT: It only works sometimes, so when I plug it out and in like 10 times, maybe I'm lucky and it will connect once.
Rankiz said:
I have installed Samsung USB Drivers manually and also tried Kies to install the newest drivers, but my Samsung Galaxy S3 still isn't recognized by my computer. What can I do?
Click to expand...
Click to collapse
Switch off the phone.connect to PC.turn it on....it all surely get recognised...
Still don work means do a factory reset
Sent from my Micromax A60 using XDA
I have the same problem. My VSGS3 works with my W8 laptop but not my W7 desktop (at all). The only thing I can assume that it would be is MTP issues with Truecrypt (my desktop is encrypted). I cannot get it to work at all.
take a look at this thread...
http://forum.xda-developers.com/showthread.php?t=1652004&page=1
dont seem like there is a solution yet.
Really???? S3 Not Recognized?
Maybe I missed something in this thread but is this really the case??? The S3 cannot be recognized as a USB storage device by Windows? I accidentally left my SD card out and now have videos I need to transfer to PC, but cannot via email or any other means I can find. Anybody have a solution? I have installed the Samsung drivers but still not recognized . . . HELP!!!
gregn said:
Maybe I missed something in this thread but is this really the case??? The S3 cannot be recognized as a USB storage device by Windows? I accidentally left my SD card out and now have videos I need to transfer to PC, but cannot via email or any other means I can find. Anybody have a solution? I have installed the Samsung drivers but still not recognized . . . HELP!!!
Click to expand...
Click to collapse
No USB storage for GS3 internal memory.
Sent from my GT-I9300 using xda app-developers app
You can use MTP mode to copy the files to the computer.
The device will appear with a phone-logo in 'My Computer'
Just plug Samsung USB cable into USB port on a PC with the Samsung USB drivers installed and cut and paste as many GB as you want .SD Phone or EXT SD card via Windows Explorer as normal .
jje
This problem is quite depressing Has a restore fixed it for anyone?
I use mac OSX and after searching for a month or so, I couldnt find a solution to connect via USB. So now I use 'Air Droid' app from Play Store. Its pretty good and simple!! Plus, you can do alot more stuff like send or read SMS from PC.. Dont need to connect via USB anymore
I found that installing that rootkit installed the drivers to connect via USB - didnt root it just installed it for the drivers. THANKS!
I am having the same problem.
My Galaxy S3 charges when connected to computer via USB.
But is not detected in USB Debugging or regular mode.
Which windows version are u using. Try installing pdanet.exe on ur pc
Sent from my GT-I9300 using xda app-developers app
You must know what windows you use, 32 bit or 64 bit? Download Kies through Samsung website, make sure got right software.
Sent from my GT-I9300 using Tapatalk 2
If you are using x64 Windows 7 this will EXE file can be found here:
C:\Program Files (x86)\Samsung\Kies\USB Driver\SAMSUNG_USB_Driver_for_Mobile_Phones.exe
back this up and then you can remove KIES. This is all you need to have your phone connected without ever really needing KIES.
Or you can use the driver provided by the TOOLKIT that MSKIP has designed (thanks - love it).
Cheers,
try disabling usb debugging
it worked for me
AbdallaKhalid said:
try disabling usb debugging
it worked for me
Click to expand...
Click to collapse
nothing has worked for me. I have not tried the toolkit but I installed drivers from the TeamEpic's easy root as described by QBKing77 and those have not worked since I installed twrp
One more to this incredible situation :angel:
experienced the same on my win7 64 bit. I removed it on the faulty usb port to another one and then luckily the driver installation went fine. Weird but worked.
Sent from my GT-I9300 using xda app-developers app
YES!
Disabled USB Debugging and it worked!
Cheers @AbdallaKhalid

stock jellybean and computer conectivity question

i have installed the stock jellybean rom from here but since doing so i have noticed that when i connect my phone to the computer via usb cable my computer does not bring up the 'autoplay' options allowing me to access the phones storage and be able to drag and drop files to the phone etc.
I have tried installing kies so i can transfer files this way (pictures/videoe etc) but the computer dose not seem to see the phone?
any ideas
thanks
Phone should be in Windows explorer .
jje
JJEgan said:
Phone should be in Windows explorer .
jje
Click to expand...
Click to collapse
sorry can you explain more what you mean by this?
i am using windows vista on my computer, are you saying there is another way of detecting my phone when it is connected to the computer via the usb?
when i click on 'start' then 'my computer' i can see the drives on the computer etc but no phone attatched where i would normally see it.
Then that usually means you have no USB drivers installed for the phone .
jje
Try reinstall usb driver for vista version.
Jellybean is still under beta. Bugs are inevitable.
Sent from my GT-I9300 using xda app-developers app
Drivers were installed when adb was installed, also when toolkit was installed.
Sent from my GT-I9300 using xda app-developers app

Connecting SGS3 to PC

Hi to all.
I have a strange problem with my SGS3 I9300.
When i connect it to the pc trough USB cable, it make me choose if i want to connect it like "dispositivo multimediale" which is the italian translation of Media Drive (or something like that) and should be the normal connection or "fotocamera" which means camera.
Doesn't matter what option i choose, the phone won't connect to PC.
Any suggestions?
Willy89 said:
Hi to all.
I have a strange problem with my SGS3 I9300.
When i connect it to the pc trough USB cable, it make me choose if i want to connect it like "dispositivo multimediale" which is the italian translation of Media Drive (or something like that) and should be the normal connection or "fotocamera" which means camera.
Doesn't matter what option i choose, the phone won't connect to PC.
Any suggestions?
Click to expand...
Click to collapse
Delete all drivers for the SGS3 from your pc. Then try to connect via MTP (it´s the first option) and Windows should install the right drivers. If it doesn´t work, try to delete the drivers aswell and use this to install the drivers.
Mine connection istn´t working well, too. Sometime I have to plug out and plug in, restart PC and phone etc. But you can use the Easy UMS app.
R: Connecting SGS3 to PC
I've forgot to say that i have Windows 8 64 bit
Sent from my GT-I9300 using xda app-developers app
Ok will try your suggestions...
Willy89 said:
Hi to all.
I have a strange problem with my SGS3 I9300.
When i connect it to the pc trough USB cable, it make me choose if i want to connect it like "dispositivo multimediale" which is the italian translation of Media Drive (or something like that) and should be the normal connection or "fotocamera" which means camera.
Doesn't matter what option i choose, the phone won't connect to PC.
Any suggestions?
Click to expand...
Click to collapse
You neglect to say if you have installed Samsung Usb drivers or kies .
jje
1. As JJEgan said, install drivers, first.
2. Uninstall KIES, or make sure that its services are not running in background on PC
3. Before connecting the phone, cut-off internet connection on PC. It will always try to download drivers from MS
4. Try another data cable.
JJEgan said:
You neglect to say if you have installed Samsung Usb drivers or kies .
jje
Click to expand...
Click to collapse
Kies was installed but then i've removed it

Categories

Resources