I have Htc Thunderbolt and Asus transformer and would like to OC. Both are rooted and installed it custom kernel that can be OC. They showed up in about phone and about tablet so I know they were flashed correctly. I'm using setcpu to OC but when I go into the app the max that it is showing me is 1ghz and I can set anything higher. Is there any other settings I need to mess with? I flashed the zip folder in clockwork recovery mode.
Sent from my SHIFTAO5P using XDA App
You need to use a kernel which allows frequencies above 1Ghz for your device.
What is the frequency range of your kernel? Did you select "autodetect" to allow setcpu to recognize the frequencies?
Is SetCPU asking for, and are you granting it superuser permissions? If you don't grant it superuser permissions you can underclock, but not overclock.
OK it was set on nvidia tegra2 I didn't know you set it for auto detects thanks for the help.
Sent from my SHIFTAO5P using XDA App
gammagogeta said:
I have Htc Thunderbolt and Asus transformer and would like to OC. Both are rooted and installed it custom kernel that can be OC. They showed up in about phone and about tablet so I know they were flashed correctly. I'm using setcpu to OC but when I go into the app the max that it is showing me is 1ghz and I can set anything higher. Is there any other settings I need to mess with? I flashed the zip folder in clockwork recovery mode.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
The simplest way is to use ROM Toolbox app. It has a range from 122MHz to 2.016GHz.
febycv said:
The simplest way is to use ROM Toolbox app. It has a range from 122MHz to 2.016GHz.
Click to expand...
Click to collapse
Not on all devices and kernels.
Related
Hi! first of all sorry my english (not my first language).
I have Miks CM7 6.5.2 and Francos kernel 14.1, when i try to set setcpu and i put "set on boot" when i back the settings are again the stock ones (245/600 ithink, something like that), and is not saving the OC, anyone knows what can i do?
btw, setcpu is not on sdcard
Regards!
Use No-frills CPU Control from the Market. It sets on boot for me. It's also incorporated in the new devoid.
Try to downgrade SetCPU, use version 2.11a or 2.1.2.1. This should work.
Sent from my LG-P500 using XDA Premium App
Well, I think you should just wait a few minutes after reboot before checking. Since, AFAICT, this is a feature to prevent you from being stuck in a boot loop.
CM7 has its own option in settings to over clock so you dont need setcpu i still use cause i dont like mine to be permanently over clocked but that might be why try uninstalling setcpu and ust using the CM7 settings
dislplin01 said:
CM7 has its own option in settings to over clock so you dont need setcpu i still use cause i dont like mine to be permanently over clocked but that might be why try uninstalling setcpu and ust using the CM7 settings
Click to expand...
Click to collapse
CM7 OC settings break with franco's kernel. no frills has an unclean reboot feature which sets Clock to last working freq in case of KP. so no worries there.
Sent from my LG-P500 using XDA App
I'm running fauxs kernel but I scaled it back to 1 ghz. However, when I select Time ib each state I notice that it's still going past that frequency, what am I doing wrong?
Sent from my MB860 using XDA App
i am having same issue, i think set cpu only kicks in after the boot.
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Anyone?
Sent from my MB860 using XDA App
?
10 char
do you have set on boot selected?
yeah 10char
IUH1991 said:
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I meant to say setcpu only works after boot like cpu will be 1100 while booting after OS is loaded up setcpu gets super user permission and then scale cpu down.
If kernal has set clock to 1000 by defualt and only then it boots at 1000 and u can use setcpu to over clock it.
i guess old faux's 1.6 kernel was default 1000 new 1.7 is not.
I run the original cm7 rom with the infected kernel. I use set CPU to under clock/over clock to try to save battery but it constantly gets granted super user permission, and it will not sleep automatically. Any body know a way to fix this? Btw when I get rid of set CPU completely the battery life is worse...
Sent from my PG86100 using XDA App
Go into superuser options and turn off notifications. Problem solved!
Sent from my PG8610000 using xda premium
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
EniGmA1987 said:
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
Click to expand...
Click to collapse
+1 SetCPU doesn't play well with Anthrax kernels.
Thanks guys
Sent from my PG86100 using XDA App
Is there a way to overclock the newest AOKP? There is a CPU manager in it but it only goes up to 1Ghz. So I tried a 3rd party overclocker but it still only gave me 1Ghz. I want to run it up to 1.3Ghz. Any help would be appreciated.
jaed.43725 said:
Is there a way to overclock the newest AOKP? There is a CPU manager in it but it only goes up to 1Ghz. So I tried a 3rd party overclocker but it still only gave me 1Ghz. I want to run it up to 1.3Ghz. Any help would be appreciated.
Click to expand...
Click to collapse
If it won't let you over clock it's because the current kernel won't allow you. You need to flash a different kernel that supports overclocking/voltage control
Sent from my SCH-I500 using XDA App
jaed.43725 said:
Is there a way to overclock the newest AOKP? There is a CPU manager in it but it only goes up to 1Ghz. So I tried a 3rd party overclocker but it still only gave me 1Ghz. I want to run it up to 1.3Ghz. Any help would be appreciated.
Click to expand...
Click to collapse
Glitch kernel v14 well do that for you
Sent from my SCH-I500 using xda premium
Fj mod, cwm, supersu
How do i.get 1.7. I need a kernel, but has to mesh with this rom?
liftedzuki said:
Fj mod, cwm, supersu
How do i.get 1.7. I need a kernel, but has to mesh with this rom?
Click to expand...
Click to collapse
Your kidding right?
Sent from my Transformer Prime TF201 using XDA Premium HD app
This is the top post in general. Slow weekend I see
Sent from a Flappjaxxxed AOSP note
Everybody is burnt out from the big ICS update.
OK so i think I figured it out. For those on fjs roms. You have to disable andrev oc so it disables the CPU profiles set in fj-tools. I did this by using rom toolbox. Go into root explorer and browse to system/xbin and find the andrev oc file and rename it to andrev oc.bak then set a CPU profile with which ever app you are using and reboot. I'm using system tuner to both overclock and undervolt. This is working for me so far. You can check by going into settings ans clicking on CPU tweak. If it force closes then its disabled. I was checking logcats and it is no longer changing the CPU back to default settings on screen lock. Flap feel free to chime in if this is gonna break something else. Other wise no issues yet.
http://forum.xda-developers.com/showthread.php?t=1771220
Copied it from another thread