Hello community!
I tried to unlock bootloader on my mini pro, unsuccessfully, of course
Now I have some questions, just to make things clearer.
Followed instructions from guide on this forum.
USB debugging mode is enabled. Here is log:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
670 KB/s (585731 bytes in 0.852s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
110 KB/s (3087 bytes in 0.027s)
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
Waiting ...
Getting ROOT rights.
- exec '/system/bin/sh' failed: No such file or directory (2) -
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
474 KB/s (8064 bytes in 0.016s)
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
Second, we need to write semcboot
546 KB/s (596916 bytes in 1.066s)
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
Press any key to continue . . .
I suppose my mistake was trying to unlock on non-srandard ROM (MiniCM7pro v10).
I do not understand role of PC Companion in whole process. Is it used just to check connection between phone and PC? Do I have to really connect to PC Companion enabling USB Storage?
Thanx!
a kind of answer here
of course do not reflash miniCM7 2.0.7 since it is not for pro
but the other steps should work
(-Reflash Eclair with SEUS
-Root with SuperOne Click
-Unlock bootloader)
BACKUP before anything else !!!
Thank you Mat, can you also clarify PC Companion question?
cheers!
gstipe said:
Thank you Mat, can you also clarify PC Companion question?
cheers!
Click to expand...
Click to collapse
PC compagnon is needed for one thing : a driver needed for flashtool
if you don't want to install PCcompagnon, you need to install the driver :
in flashtool folder, go to drivers and install "ggsetup-2.2.0.10.exe"
I have it installed already, so no problem. Now I know why is needed!
Thanks mate!
Related
Well, I tried to install app2sd but it did not work.
But I post here because it has actually come off the root of my phone: (
And now also with the root of superoneclick I the following error:
Citation
Killing ADB Server ...
OK
ADB Starting Server ...
* Daemon not running. starting it now on port 5037 *
* Successfully started "daemon *
OK
Waiting for device ...
OK
Pushing rageagainstthecage ...
188 KB / s (5392 bytes in 0.028)
OK
chmod rageagainstthecage ...
- Exec / system / bin / sh 'failed: Exec format error (8) -
OK
Running rageagainstthecage ...
- Exec / system / bin / sh 'failed: Exec format error (8) -
FAILED
Anyone have a idea?
I have to reinstall busybox reesayé via Titanium backup but impossible and the problem seems to come from because I run root lorqui explore or Tb I have the notification "xxx has received temporary super-user"
Écouter
Lire phonétiquement
Same problem!
Please help!
i am having the same problem...tried everything flashing seus but nothing works as the script itself is corrupt nothing runs
Me too!!!
Someone to help us!!!!
Found out that my anti virus was interfere with the seus... now I am all good
Sent from my X8 using XDA App
I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
luyenlt said:
The same with this enquire. If anybody enable to root and upgrade new Rom for F-04E, can u pls share for us? Thanks
Click to expand...
Click to collapse
More : If any one known the way to unlock !
phankhang said:
More : If any one known the way to unlock !
Click to expand...
Click to collapse
Please help if there are any solution . Thank all
root
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
did you got this resolved? USB debugging enabled on your device? did you install the driver correctly first?
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
Your phone is F-02E. The root tool for F-04E
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
m_ghv_geo said:
am getting error
mount: Operation not permitted
Code:
-- F-02E ╥╗╝ⁿroot╣ñ╛▀ --
▒╛╚φ╝■└┤╫╘2ch┬█╠│íú└╢╔½dnxwj╝≥╥╫║║╗»íú
!! ╛»╕µ !!
1íóroot╓«║≤╜½╩º╚Ñ▒ú╨▐ú¼dnxwj║═╫≈╒▀╢╘┐╔─▄▓·╔·╬╩╠Γ▓╗╕║╚╬║╬╘≡╚╬íú
2íó┐¬╩╝root╘≥╩╙╬¬─π═¼╥Γ╫╘╨╨│╨╡ú╖τ╧╒íú
╟δ╫╘╨╨╫÷║├root╟░╫╝▒╕íú
PSú║╚⌠─·▓╗╧δrootú¼╟δ╓▒╜╙╣╪╡⌠╒Γ╕÷┤░┐┌íú
Press any key to continue . . .
╒²╘┌╕┤╓╞SuperUser...
╒²╘┌╚í╡├┴┘╩▒root...
989 KB/s (1283460 bytes in 1.267s)
1136 KB/s (146652 bytes in 0.126s)
867 KB/s (366952 bytes in 0.413s)
911 KB/s (1578585 bytes in 1.692s)
[+] This may take a few minutes.
[-] Failure.
╒²╘┌╜Γ│²LSM...
Mapping kernel memory...
Detected kernel physical address at 0x80008000 form iomem
Attempt fb_mem_exploit...
OK.
Finding kallsyms address in memory...
Segmentation fault (core dumped)
╒²╘┌╣╥╘┌/system╕─╬¬rw...
mount: Operation not permitted
╒²╘┌╠ß╔²SuperUser╚¿╧▐...
/system/xbin/su: cannot open for write: Read-only file system
Unable to chmod /system/xbin/su: No such file or directory
Unable to chmod /system/xbin/su: No such file or directory
╒²╘┌╓╪╨┬╣╥╘┌/system╬¬rw...
mount: Operation not permitted
╒²╘┌░▓╫░Superuser...
1140 KB/s (1578585 bytes in 1.352s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
╣º╧▓─·ú¼─·╡─F-02E╥╤╛¡│╔╣ªroot┴╦íú
Press any key to continue . . .
---------- Post added at 07:13 AM ---------- Previous post was at 07:08 AM ----------
i do have super user icon in my phone when i press install or recovery install it gives me "there was error installing superuser.please send a log of the error to the developer." but there is no log
also i checked with various apps to see if it was rooted but no it is not
Click to expand...
Click to collapse
greatslon said:
1. Setup USB drivers on PC
2. Plug in Fujitsu Arrows V F-04E to PC (USB-debugging on)
3. Run root\runme.bat
Click to expand...
Click to collapse
You tried already, and is it successful rooted for F-04E?
Robiche said:
I Just bought the new Fujitsu Arrows F-04E running android 4.0.4.
For now, there is nothing I could find on how to root it. I already tried the method of Bin4ry (Root MANY ANDROID) but didn't work. I'm now actively searching on Japanese sites, but nothing so far. If by chance someone in this community has some useful information that can help, please don't hesitate to share them. I will also share what I find, if any.
Thanks and hope we can figure the way to do it !
Cheers
Click to expand...
Click to collapse
Hi bro,
Fujitsu F-04E rooted full
Pls checking some pictures below in attachment
If any support, feel free to contact me via YM: lethanhluyen
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Phangtonpower said:
Hi,
I'm a noob at this stuff. I'm trying to root my f-04E. I've downloaded the two zip files, but I don't know how to install the usb drivers. I've tried installing them onto my SDK manager and still nothing happens. I've tried the runme option in the root file, but it says that my device is not detected. Any help would be awesome.
Click to expand...
Click to collapse
pls contact me for details
luyenlt said:
pls contact me for details
Click to expand...
Click to collapse
Actually I did send you a PM on here. Please check your in box
Is there anyone else with any ideas?
That we can have it posted here and have it documented for others to reference in the future.
Weekend bump.
About to call this one a lost cause bump
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
*Update
though i was able to install superuser and passed rootchecker test i found I couldnt do a lot of things. So I downloaded the newest version of superuser renamed it to superuser.apk replaced the one in the zip and reran it. Works perfect, so far. Thanks again!
Hello to everyone I had an issue that was my phone restarts during calls and randomly, I just follow the root guide to eliminate all docomo bloatware
I root the phone successful but three days after a lot of app showed errors and restarts
When I restart phone the phone show three errors that are:
Com. Android. Phone process was closed and the Hceviewermaganer process has stopped and that situation is always on start
My phone doesn't work because this apps doesn't permit access to phone menu
Version of my phone is V16R
Question how I can try to reinstall original software, anyone has the recovery files to be uploaded through the recovery
Or any method to access through a Pc
Regards
Sent from my GT-I9300 using xda app-developers app
moku160 said:
Thank you, was able to root no problem on the first try.
Although I did use generic google drivers. Sorry would link where I got them but cannot remember.
*update
Also wanted to mention that I have a EM01f, emobiles equivalent of this device.
Click to expand...
Click to collapse
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Guigui_18892 said:
Hello !
I also have a EM-01F but I've the same problem as mentioned before. SuperUser icon is correctly installed on the device but when it's launched, an error pops to say me it can't install su access...
Which drivers have you used are what root program have you launched ?
Click to expand...
Click to collapse
check out my follow up post. I had to redo it, replacing the given superuser.apk without a newer version. THen it seemed to work correctly.
Hi everyone,
I have a tablet Sony p with baseband r402, i'm italian but i bought it in usa, android version si 3.2.1 but i can t upgrade to 4.0.1.
The upgrade software return me an error that the tablet can t connect to wifi but the wifi still connect and the stock browser navigate perfectly.
Any solution?
Ps. The tablet si at&t branded
Ps2. Sorry 4 bad english guy
Thx
Thepunisherg4 said:
Hi everyone,
I have a tablet Sony p with baseband r402, i'm italian but i bought it in usa, android version si 3.2.1 but i can t upgrade to 4.0.1.
The upgrade software return me an error that the tablet can t connect to wifi but the wifi still connect and the stock browser navigate perfectly.
Any solution?
Ps. The tablet si at&t branded
Ps2. Sorry 4 bad english guy
Thx
Click to expand...
Click to collapse
First things first, get off that 3.2.1 AT&T crap. See http://forum.xda-developers.com/showpost.php?p=39383023&postcount=263
Then you can update to ICS plus 3G will still work
stifilz said:
First things first, get off that 3.2.1 AT&T crap. See http://forum.xda-developers.com/showpost.php?p=39383023&postcount=263
Then you can update to ICS plus 3G will still work
Click to expand...
Click to collapse
Thx mate, but can t understand the steps i have to do..
I'm a little bit confused!
i complete the steps following:
wipe data\factory in recovery
install abd drivers succesfull
download aio 5.3
enable usb debug on sony tablet p
try to root with aio but return me a lot of errors:
run-as: Package 'com.pwn.me' is unknown
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~40s)
[*] Attempting to insert fake local.prop entry...
[+] Flooding log...
[*] Rebooting device...
[*] Waiting for tablet to reboot...... (~40s)
[*] Attemping persistence...
remount failed: Operation not permitted
failed to copy 'files\su' to '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
failed to copy 'files\tempsu' to '/system/bin/tempsu': Read-only file system
Unable to chmod /system/bin/tempsu: No such file or directory
Unable to chmod /system/bin/tempsu: No such file or directory
failed to copy 'files\busybox' to '/system/xbin/busybox': Read-only file system
Unable to chmod /system/xbin/busybox: No such file or directory
/system/xbin/busybox: not found
failed to copy 'files\Superuser.apk' to '/system/app/Superuser.apk': Read-only f
ile system
[*] Cleaning up...
failed on '/data/data/com.android.providers.media/lib.bak' - No such file or dir
ectory
[*] Rebooting...... (~35s)
[*] MTP driver has been enabled back.
[*] Exploit complete!
[*] Press any key to continue.
the root process stops but there isn't any sign of the root.
i try to change region but it tells me that NEED ROOT to procede
any idea?
please help me, thx
Q&A for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Cannot go to recovery
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
rojculanag said:
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
Click to expand...
Click to collapse
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
rojculanag said:
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
Click to expand...
Click to collapse
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
blueether said:
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
Click to expand...
Click to collapse
thanks. I finally was able to do it. thank you. now im trying out Android Lollipop Port and it's great.
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
0 KB/s (29 bytes in 1.000s)
15387 KB/s (15757 bytes in 0.001s)
0 KB/s (501 bytes in 1.000s)
11 KB/s (11842 bytes in 1.000s)
1790 KB/s (56834 bytes in 0.031s)
334 KB/s (3082 bytes in 0.009s)
0 KB/s (385 bytes in 1.000s)
1794 KB/s (657704 bytes in 0.358s)
1996 KB/s (2965760 bytes in 1.451s)
2494 KB/s (2599934 bytes in 1.018s)
2142 KB/s (1875823 bytes in 0.855s)
855 KB/s (8759 bytes in 0.010s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
153 KB/s (1572 bytes in 0.010s)
1659 KB/s (13592 bytes in 0.008s)
cannot stat 'easyroottool\libexploit.so': No such file or directory
545 KB/s (9496 bytes in 0.017s)
1335 KB/s (13672 bytes in 0.010s)
Copying kernel module...
1122 KB/s (34473 bytes in 0.030s)
0 KB/s (765 bytes in 1.000s)
1659 KB/s (13592 bytes in 0.008s)
Kernel version is 3.4.0-perf-g0109737
Version does not match 3.4.0-perf-ge4322cd, needs patching...
1+0 records in
0+1 records out
19 bytes transferred in 0.001 secs (19000 bytes/sec)
Kernel module patched.
modulecrcpatch (by zxz0O0)
module_layout: match
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
towelzxperia (by zxz0O0)
thanks to geohot for libexploit
creating libzxploit.so
error: Could not open libexploit.so
/system/bin/sh: /system/xbin/busybox: not found
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Aby kontynuować, naciśnij dowolny klawisz . . .
What am I doing wrong? Can anyone help? I have tried on the second laptop with the same result. Windows 7 x64.
Never mind. I didn't turn off antivirus.
Hi..
Wondering if I'm able to flash these cwm/ twrp
Into my togari 6833 (xperia z ultra)?
Error while installing on C6802 Xperia Z Ultra
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: more than one device and emulator
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: protocol fault (status read)
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Problem while switching to recovery..
I installed recovery properly..
But when I am trying to switch recovery mod, It is directly switch on..
I am using a latest firmware 14.4.A.0.108..
Is there any solution for it??
I installed this successfully on my Z ULtra. However when I tried to do a nandroid backup or flash a custom rom i always face this error : cannot mount system ??
ANy solution to this ?
Thanks
Issues with Dual Boot Recovery
Hi,
Anyone can help me out?
I have an Xperia Z Ultra, freshly rooted with unlocked BL.
I installed Dual Recovery but for some reason, I can't reboot to any of the recovery this has to offer (PhilTouch, CWM, and TWRP).
Tried the physical button method and via NDR Utils with no success.
Looking at the log on the console, it looks like it failed to copy some files saying that a given directory is read-only but I checked using ES File Explorer that these directories are writable.
Can anyone help out as I would like to create a nandroid backup before messing with anything else just in case.
Anyway, here is the output of the installer console:
===========================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
19 KB/s (30 bytes in 0.001s)
4728 KB/s (16947 bytes in 0.003s)
326 KB/s (501 bytes in 0.001s)
4656 KB/s (11920 bytes in 0.002s)
5842 KB/s (56834 bytes in 0.009s)
1504 KB/s (3082 bytes in 0.002s)
3271 KB/s (30148 bytes in 0.009s)
453 KB/s (1162 bytes in 0.002s)
2805 KB/s (34473 bytes in 0.012s)
225 KB/s (924 bytes in 0.004s)
1896 KB/s (13592 bytes in 0.007s)
375 KB/s (385 bytes in 0.001s)
5405 KB/s (719520 bytes in 0.130s)
5668 KB/s (3419065 bytes in 0.589s)
5123 KB/s (2431545 bytes in 0.463s)
6589 KB/s (1936442 bytes in 0.287s)
3477 KB/s (8902 bytes in 0.002s)
=============================================
Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
-rwxr-xr-x 1 shell shell 719520 Apr 8 14:27 /data/local/tmp/recover
y/busybox
Press any key to continue . . .
##########################################################
#
# Installing XZDR version 2.8.5 RELEASE
#
#####
Temporarily disabling the RIC service, remount rootfs and /system writable to al
low installation.
insmod: can't insert '/system/lib/modules/wp_mod.ko': File exists
Copy recovery files to system.
Copy chargemon script to system.
Copy dualrecovery.sh to system.
Copy rickiller.sh to system.
Installing NDRUtils to system.
Copy disableric to system.
Copy busybox to system.
Trying to find and update the gpio-keys event node.
Found and will be using /dev/input/event5!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propGnS20I': R
ead-only file system
Trying to find and update the power key event node.
Found and will be monitoring /dev/input/event4!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propUUaD89': R
ead-only file system
Speeding up backups.
touch: /sdcard1/clockworkmod/.hidenandroidprogress: Read-only file system
Make sure firstboot goes to recovery.
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propTcsuIy': R
ead-only file system
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propT1eL2g': R
ead-only file system
=============================================
DEVICE WILL NOW TRY A DATA SAFE REBOOT!
=============================================
=============================================
Your installation has already cleaned up after
itself if you see the install.bat/install.sh exit.
=============================================
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
=============================================
Hi sorry I just want to see if anyone can help me with my z ultra I can't get it to enter recovery with the hardware keys and the rom isn't working correctly so I can't do anything when It turns on all help appreciated
Anyone?
@[NUT], assistance please?
Thanx!
Resolved!
I removed the installation using the guide on the original thread and reinstalled a newly downloaded version (ZU-lockeddualrecovery2.8.8-RELEASE.installer.zip)
Just thought I'd place a feedback here.
Thanks!
Can this be installed on purely stock unrooted firmware? I'm on Lollipop .270.
Sent from my LG-F320L using Tapatalk
Failed install ZU Dual Recovery
Hi... sorry, i want to see if anyone can help me with my Z Ultra C6833 build number 14.4.A.0.108, I am failed install recovery.
Can anyone help me out, until success install Dual Recovery...
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: protocol fault (status read)
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Hello I'm using a Xperia z ultra c6833 running stock lollipop 5.2 I have done nothing on it i dont have root my bootloader is locked keep in mind that lollipop has some problems I want to install a coustem rom can I use this method is there any other way please help me I'm losing hop please help
---------- Post added at 12:35 PM ---------- Previous post was at 12:14 PM ----------
Hello I'm using a Xperia z ultra c6833 running stock sony lollipop 5.0.2 I don't have root access and my bootloader is locked since lollipop has problems and it's really hard to get a coustem recovery in my situation can I use this method is there any other way I'm losing hop can any one please help
Hi, I have a stock Tablet Z on 10.7.A.0.222
I have successfully unlocked the bootloader via instructions on xperia firmware. However I have been unable to root it or install twrp.
I am a complete noob at this but the tablet is running incredibly laggy as stock so want to refresh it. I was using this guide:
https://www.cyanogenmods.org/forums/topic/xperia-tablet-z-cm14-cyanogenmod-14-nougat-7-0-rom/
In that guide I got to 1b which led me to this guide for installing recovery:
https://www.cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
When i try to do step 6 the tablet shuts off and does not go into bootloader mode where I can flash twrp.
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
cward0625 said:
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
Click to expand...
Click to collapse
Hello!
Look at this thread.
Rootk1t said:
Hello!
Look at this thread.
Click to expand...
Click to collapse
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
- Root. Follow Bin4ry root : http://forum.xda-developers.com/show....php?t=1886460
Download : http://forum.xda-developers.com/show....php?t=1886460
Below is what I get in the command prompt when doing the steps. When I tried option 4 for new xperia root it did not work...it just hangs here:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry =
= (15.06.2014) v36 =
======================================================================
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 4
Please connect Xperia device with enabled USB-Debugging now to your Computer
Going to copy over some files ...
33 KB/s (442 bytes in 0.012s)
33 KB/s (170 bytes in 0.004s)
13 KB/s (57 bytes in 0.003s)
Starting restore operation, please look on your device and confirm restore!
after that press anykey here in the console
Now unlock your device and confirm the restore operation.
Press any key to continue . . .
After restore is confirmed please look on your device and choose "Service Tests -> Display" in Service menu and WAIT THERE!"
Starting: Intent { act=android.intent.action.MAIN cmp=com.sonyericsson.android.servicemenu/.ServiceMainMenu }
/data/local/tmp/onload.sh ...
Then if I try option 1 instead I get this (although I do not think this is the correct option anyways:
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Exploit type:
0) xsacha Z2 Tablet Root
1) jcase Z1S Root (make sure to download the pwn binary first from XDA thread!)
Make a choice: 1
Please connect your device with enabled USB-Debugging ...
Copy needed files ...
4106 KB/s (574722 bytes in 0.136s)
6023 KB/s (104576 bytes in 0.016s)
5317 KB/s (2139595 bytes in 0.392s)
72 KB/s (148 bytes in 0.001s)
1024 KB/s (2092 bytes in 0.001s)
4525 KB/s (1109128 bytes in 0.239s)
Beaups and jcase were here
donations may go here, pleaes say what it was for -> [email protected]
Rebooting device, please wait ...
mount: Permission denied
dd: /system/xbin/su: Read-only file system
chown: /system/xbin/su: No such file or directory
Unable to open /system/xbin/su: No such file or directory
ln: /system/bin/su: Read-only file system
dd: /system/app/Superuser.apk: Read-only file system
chown: /system/app/Superuser.apk: No such file or directory
Unable to open /system/app/Superuser.apk: No such file or directory
dd: /system/xbin/busybox: Read-only file system
chown: /system/xbin/busybox: No such file or directory
Unable to open /system/xbin/busybox: No such file or directory
/data/local/tmp/install_tool.sh[39]: /system/xbin/busybox: not found
mount: Permission denied
"If this helped you please consider donating to the original author jcase: http://forum.xda-developers.com/showpost.php?p=53407127&postcount=1004"
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
cward0625 said:
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
Click to expand...
Click to collapse
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Rootk1t said:
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Click to expand...
Click to collapse
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
cward0625 said:
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
Click to expand...
Click to collapse
wiping and installing 14.1 did not work, but when i did 15.1 it did. I think I should be set now.
Thanks