Alright I am running leedroid atm, every kernel I try flash causes bootloop except tiamat. Is there a way around this? I have rogers EVO and is s off. Hboot 1.49.0008. I have tried highs ROM as well no luck bootloop.
Sent from my HTC EVO 3D X515m using XDA App
+1. Every kernel i put in boot loops or black screens. Dont know what the problem is. Currently searching around the forums
---------- Post added at 02:16 AM ---------- Previous post was at 01:50 AM ----------
I tried that tiimat and it worked. I'm still researching in why no others are. Will try to remember to update this post, but send me a message in a few days if you haven't heard from me. I don't know the answer, but I'm usually pretty good at finding someone that does. Gonna hang it up for the night.
---------- Post added at 02:26 AM ---------- Previous post was at 02:16 AM ----------
I just noticed I have serious WiFi issues with this kernel though. Will not see it most of the time, and will never connect. I'm going to try to put it down for the night again...
BrockFerens said:
Alright I am running leedroid atm, every kernel I try flash causes bootloop except tiamat. Is there a way around this? I have rogers EVO and is s off. Hboot 1.49.0008. I have tried highs ROM as well no luck bootloop.
Sent from my HTC EVO 3D X515m using XDA App
Click to expand...
Click to collapse
Rogers are gsm based phones, right? - have to be, cause I'm also running Leedroid which is only available for the gsm version!
..so there isn't any gsm custom kernel out yet and it seems your trying to flash a CDMA Kernel to a GSM Phone - isn't very healthy for your phone (-;
The reason why we still don't have any custom kernel is, because HTC didn't released the gsm board files with the 2.3.4 kernel sources yet.
Just have a look at the Leedroid thread to stay up2date - there are a lot of post were people spamming htcs fanbook page etc. to get htcs attention.
Butt its Sprint. I thought Sprint was cdma? Are there longterm consequences to flashing the wrong kind? Everything seems to work fine after nand restore after each kernel attempt. So if there aren't any kernels, how is everyone else oc ing to 1.8?
bitterevp said:
Butt its Sprint. I thought Sprint was cdma? Are there longterm consequences to flashing the wrong kind? Everything seems to work fine after nand restore after each kernel attempt. So if there aren't any kernels, how is everyone else oc ing to 1.8?
Click to expand...
Click to collapse
yeah, sprint is cdma, but the OP is talking about Rogers, which is GSM.
Yea, those guys gone done forgot about us lonely gsm'rs. Tiamats kernel works though am running it right now, unless its not really that different. -
Sent from my HTC ShooterU using XDA App
BrockFerens said:
Yea, those guys gone done forgot about us lonely gsm'rs. Tiamats kernel works though am running it right now, unless its not really that different. -
Sent from my HTC ShooterU using XDA App
Click to expand...
Click to collapse
Could you Post the Link to this kernal?
Maybe we could use this Kernel as base.
Sent from my HTC EVO 3D X515m using xda premium
Related
I don’t know if anyone has experienced this before but I just rooted my phone and flashed the Sick-Sense VX.1 ROM and for some reason any time I switch the camera to 3d mode I get a green/pink blocky image (see attachment). I don’t know what is going on but the 2d camera works just fine and since the phone is bootloader 1.4 I really don’t want to exchange it and wind up with BL 1.5. Any help would be greatly appreciated.
What I have tried:
Reboot
Pull battery 10 min
Reflash Stock Kernel
Flash SHOOTER-CDMA-SENSE-AnthraX-RLS001 Kernel
Reflash Sick Sense ROM
HTC Amaze Camera
Wipe the whole phone a few times then reinstall the ROM perhaps.
That's a weird pic lol. A full wipe should help . If not the camera is screwed up.
deadlocked007 said:
Try a different Rom I suggest infected eternity with the stock theme flashed over because of the pervertedness -_- otherwise try to use a stock kernel?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Lol whats wrong with the theme he is using on enternity it's sleek and good lookin
Thanks Reaper and just to be sure since I’m a noob, to do a full wipe I boot into recovery and install viperROM_superwipe.zip then install ROM correct?
HKP7 said:
Thanks Reaper and just to be sure since I’m a noob, to do a full wipe I boot into recovery and install viperROM_superwipe.zip then install ROM correct?
Click to expand...
Click to collapse
Sup man virus sometimes includes a superwipe tool with his roms I would check to see first if it has one.
Also there maybe nothing wrong with the rom your using you just need to do a full wipe like normal or you will have funky issues like the camera thing. If your flashing kernels with S on it can also cause that sorta issue. Read up on the kernels when it comes to flashing.
Also does the Amaze camera do 3d? I know it was a port from what I was reading up on.
Hope this helps man.
---------- Post added at 12:51 AM ---------- Previous post was at 12:47 AM ----------
deadlocked007 said:
I guess its not the theme but the pictures :|
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Ya I know what you mean not something I wouldn show off at the office lmao unless you out with your buddies.
Tho it's not really that nasty atleast there are no tittys stickin out
reaper24 said:
Sup man virus sometimes includes a superwipe tool with his roms I would check to see first if it has one.
Also there maybe nothing wrong with the rom your using you just need to do a full wipe like normal or you will have funky issues like the camera thing. If your flashing kernels with S on it can also cause that sorta issue. Read up on the kernels when it comes to flashing.
Also does the Amaze camera do 3d? I know it was a port from what I was reading up on.
Hope this helps man.
---------- Post added at 12:51 AM ---------- Previous post was at 12:47 AM ----------
Ya I know what you mean not something I wouldn show off at the office lmao unless you out with your buddies.
Tho it's not really that nasty atleast there are no tittys stickin out
Click to expand...
Click to collapse
Which ROM has titties sticking out. Just curious for research purposes.
its because that camera is the one from the amaze and i dont think it has 3d capabilities.. switch roms or get the apk from another rom
The stock camera started displaying that weird image after flashing new ROM so I installed the amaze cam since it is supposed to work in 3D but it shows the same screen artifacts in 3D mode. I can view 3D pics and videos just fine its only the 3D camera that is freaking out.
is likely to be antrax kernel, i have that same problem but only with 3d games using infected rom with stock antrax, so i suggest you to try other kernel before you flash other rom.
KB112 said:
Which ROM has titties sticking out. Just curious for research purposes.
Click to expand...
Click to collapse
Lmao same here I have seen some interesting wallpapers . On infected rom site virus has some nice lookin wallpapers and boot screens for enternity Need some research
Just as an update, I used superwipe and flashed new ROM and still no dice. Using my finger over the two camera lenses, I noticed that in 3D mode only the top camera is working so it’s probably a hardware issue.
Since I will get stuck w the 1.5 boot loader I was thinking it might just be better to wait for the ICS update then bring the phone in. Any thoughts on this?
Hi Guys,
i have a serious problem. i bought a second hand korean version of HTC evo 4g, known as HTC rider. i have searched the forums and they mention that its same as evo 3d. The problem is that my phone is stuck on the boot logo and i want to install a custom rom in it. i have also noticed that hboot has been installed in it so i presume that i can install the custom rom. which rom can i use for it?
please help.
The evo 4g is the original evo, not the 3d. So my guess is that you need a 4g evo Rom.
Posted with Tapatalk 2
unfortunately, i have tried a 4g rom also, but it didnt work. the installer showed an error message for asstertion and then aborted the installation :|
Since its a different phone with a different footprint, you might need to adjust the build.prop in the rom before you flash, that way the footprint in the phone matches the footprint in the rom. That's the first thing that clicked in my head, I'll try and do some extra research for you if I can, that way you know what to change what to
Sent from my PG86100 using xda app-developers app
try this http://forum.xda-developers.com/showthread.php?t=1307336
and this http://www.qdppc.com/forum-159-1.html (i used chrome to translate it)
quick root for evo 4g+
http://forum.xda-developers.com/showthread.php?t=1307336&page=4
---------- Post added at 06:24 AM ---------- Previous post was at 06:13 AM ----------
beneath-a-burning-turtle said:
Since its a different phone with a different footprint, you might need to adjust the build.prop in the rom before you flash, that way the footprint in the phone matches the footprint in the rom. That's the first thing that clicked in my head, I'll try and do some extra research for you if I can, that way you know what to change what to
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Hi Mate,
Can you help us (evo 4g+ users) to find a working custom rom and kernel.
thanks in advance.
I have a CDMA EVO 3D and every AOSP rom causes random reboots. Does anyone else have this problem and if so how did you fix it?
We need more information.Are you s-on or s-off? What hboot are you running?
I've found the AOSP ROMs to be relatively stable on my phone, but they are still a work in progress and may have some issues.
I am s-off with hboot 1.4 and have used both twrp and 4ext but still have the same problems.
I used to have the same issue but reboots are now almost none scince I started using ButteredToast kernel v 11.1 works the best for me even on a ROM that originally gave me a ton of reboots/freezes
Sent from my PG86100 using xda app-developers app
---------- Post added at 10:11 AM ---------- Previous post was at 10:11 AM ----------
And I thought this issue would never be fixed on my phone
Sent from my PG86100 using xda app-developers app
Did that kernel just come with the rom or did you get it from somewhere else.
Never mind stupid question
so im a noob at this and i rooted my evo 4g lte and when i start the phone up the first htc startup boot screen it says on every rom i install
"This build is for developmental purposes only. Do not distribute outside of HTC without HTC's written permissions. Failure to comply may lead to legal actions."
What's Your Question?
Sent from my SGH-T769 using xda premium
Hes asking how to get rid of the red text on the screen when it boots up.
Sorry but you can't until there is an s-off for hboot 2.09. I also hate it. If your hboot is lower, you can get s-off, which is highly recommended
Btw its not the roms, no Rom will be able to take it away. Its something HTC did to be d*ckheads
Sent from my EVO using xda app-developers app
bennyboy78 said:
Hes asking how to get rid of the red text on the screen when it boots up.
Sorry but you can't until there is an s-off for hboot 2.09. I also hate it. If your hboot is lower, you can get s-off, which is highly recommended
Btw its not the roms, no Rom will be able to take it away. Its something HTC did to me d*ckheads
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
^^^^^^ this
thank you also would that be causing my phone not being able to be fully flashed to cricket???
Its only a message to let you know the phone is setup for development, it does not affect anything. What is the problem you are having with Cricket?
Nevermind I see the other post
took it to a flashing place to get it flashed and they could not get data and mms working only talk and text
No that dosen't have anything do do with flashing the phone to another carrier
SACS BADASS S3 ROM
---------- Post added at 10:36 PM ---------- Previous post was at 10:35 PM ----------
You have to manually activate it once you've flashed it
SACS BADASS S3 ROM
Evo last night started boot looping randomly after changing the band settings. I have tried ruuing and nadda thing is working. S-off, hboot 2.09.
restore your nandroid
and stop messing with stuff
What do you mean when you say you changed the band settings?
Sent from my EVO using xda premium
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
bigdaddy619 said:
restore your nandroid
and stop messing with stuff
Click to expand...
Click to collapse
^ This.
You did make a Nandroid.....right?
Sent from my EVO using xda premium
Yeah ive tried that with no luck. and the menu is *#*#4636*#*#
No luck with your nandroid ?
SENT FROM MY LTEVO
corcgaigh said:
No luck with your nandroid ?
SENT FROM MY LTEVO
Click to expand...
Click to collapse
Luckily I was s-off and found and old ruu and it fixed the problem. I was hiking in Colorado last weekend and forced 800mhz to get service on the top of the peek. Something got borked and the virus ruu for 3.16 was not fixing the problem. The older htc ruu .exe worked great. Then I nandroided back. Just lost a few photos on my internal. All is well now.
Does Evo LTE even support 800MHz?
Edit: I was thinking of LTE, not CDMA.
Glad you got your phone working for you again