Hi at all,
i installed on my xperia x10 mini pro the newest version of miniCM7.
For recovery is CWM now on my phone, before i had xrecovery.
But with CWM Flashtool 0.3 couldnt find my phone when i choose a firmware to flash...for example one firmware from this list: Firmware X10
Could i install xrecovery again for recovery?
Have a nice day
coder90
Flashtool, doesn't works with CWM.
You, can always restore xrecovery, if u need to.
If u want the tool for reverting back to xrecovery, search it in dev section.
Or PM me, i will message u the link.
Make sure you use flashtool pre v3, so you want a 2.9.x beta otherwise it wont detect your phone. Having CWM installed has no baring on whether or not flashtool can detect your phone, i've used it since having CWM without ill effect.
Run the gordonsgate.exe included with flashtool and make sure you have SE companion installed, but exit the SE companion and dont have it running in the background. Reboot after installing.
It should then work without a hitch.
Sent from my U20i using Tapatalk
Related
I've installed a custom 2.2 rom to my X10, but I wanted to restore my phone to the standard 2.1 rom because of issues I had to restore my backup files.
Flashing with SEUS or PCC didn't work, so I thought I'd try to remove the custom 2.2 rom with Xrecovery. I selected wipe system from the Xrecovery menu. That didn't went well..
My phone doesn't boot anymore, it's getting stuck when the white Sony Ericcson appears on the display.
I already tried to flash my phone with SEUS and PCC, but I get the message I already have the newest software installed.
Flashing with Flashtool did work, but then I have to reboot my phone to turn on debugging/ unknown sources. And that still doesn't work.
Somebody can help me with this please?
Hook up to SEUS and when it says you already have the latest software, it also gives you the choice of going ahead and (re)installing it anyway. Do that, and that should take care of the problems. If you don't see that option, you should try downloading the latest version of SEUS, installing it, and trying again.
Since you did a full wipe you've lost xRecovery too, so SEUS is your best bet IMO.
I have SEUS Version: 2.11.1.9
It doesn't work, same message. I don't see an option to install it anyway..
niessam said:
I have SEUS Version: 2.11.1.9
It doesn't work, same message. I don't see an option to install it anyway..
Click to expand...
Click to collapse
To flash with Bynary's flash tool you don't need to be on usb debugging mode... Just put your cellphone on flash mode...
press the back key while you insert the usb cable and then flash whatever firmware you want...
Sent from my X10i using XDA App
recommendation is 2.1.A.0.435 because of MT & stability.
my x10i stuck at the sony ericsson screen and nvr cant go into the OS... the xrecovery cant mount the sdcard..
is there any method can solve this kind of problems ?
What have you done ?
Plz give us more information so that we can help you.
just use flashtool flash back to 2.1 and then root + install xrecovery
done!
hey repair using pc suite..,
i wan to flash the rom bak to 2.1 by using the xrecovery backup. But after i restored img, then i reboot the phone and then stuck at the sony ericsson screen. it nvr goes into the OS. and i tried to use flashtool to flash again. but the software cant detect my phone anymore. so i cant repair my phone with pc suit or flash tools at all.. now even cant go into the xrecovery >_<
nickymy said:
i wan to flash the rom bak to 2.1 by using the xrecovery backup. But after i restored img, then i reboot the phone and then stuck at the sony ericsson screen. it nvr goes into the OS. and i tried to use flashtool to flash again. but the software cant detect my phone anymore. so i cant repair my phone with pc suit or flash tools at all.. now even cant go into the xrecovery >_<
Click to expand...
Click to collapse
Well,you flash the rom back to 2.1 by using the xRecovery backup and you should flash .67 baseband after the backup also.
You did not flash the .67 BB so it stuck at SE screen.
Please try to install the usb driver to make flashtool work again.
Hello,
I've rooted my stock 2.3.3 with flash tool, but after the kernel upgrade, the phone isn't recognized by the FlashTool, so I can't ask root access and install xRecovery.
What am I doing wrong? I'm using flashtool 0.2.9 (tried with 0.3 but it's weird, doesn't seem to work as good as with 0.2.9)
svaldesm said:
Hello,
I've rooted my stock 2.3.3 with flash tool, but after the kernel upgrade, the phone isn't recognized by the FlashTool, so I can't ask root access and install xRecovery.
What am I doing wrong? I'm using flashtool 0.2.9 (tried with 0.3 but it's weird, doesn't seem to work as good as with 0.2.9)
Click to expand...
Click to collapse
You sure that you're using DooM's flashtool for GB rooting and xRec.?
Because if you use the ordinary flashtool it won't install the proper xRec. for 2.3.3 roms.
Hello from Brazil guys,
Xperia X10i 2.3.3
SD Card 2GB
Baseband .71
Locked Bootloader
Custom Rom
New Android user (3 weeks i guess)
The problem:
I was having fun with my phone, new rom and etc.
I was in xRecovery, so i deleted the /system folder by mistake. Im a idiot, i know.
Now, SEUS or PC Companion cant help me. They say that i already have the latest update.
I have some custom roms, FlashTool and other things downloaded. If it helps.
I dont know what to do.
The phone are stuck on Sony screen. Of course.
Now, i need help.
Sorry for my trash english.
Best regards,
Scarlet.
Edit: I forgot: I cant boot on Safe Mode or xRecovery too.
if you can still boot and go to xRecovery, then you can simply restore one of your backups. or if not, you can try to flash using flashtool.
try xRecovery restore first.
Hello,
Thank you for your answer.
I cant boot in xRecovery.
Can you explain how cai i flash a dead phone?
necrohades said:
if you can still boot and go to xRecovery, then you can simply restore one of your backups. or if not, you can try to flash using flashtool.
try xRecovery restore first.
Click to expand...
Click to collapse
Use pc companion to revive your phone. See pic attached.
Hit thanx if helpful!
CheersS!
From X10i on ROM : "ThGo2 v9.3"
using XDA premium
Hi. I'm a newbie on xda and I would be extremely grateful if someone could help me.
I have a problem with my X10i. It used to run stock 2.3.3 Gingerbread with root access and busybox / xRecovery 0.3 already installed. I decided to install DiXperia 7 'Avenger' by DiKeJ (greetings, buddy) on my device using xR. I downloaded the ROM and pasted it directly into my SD card. Then I did all the steps:
-Factory Reset
-Wipe Cache Partition
-Wipe Dalvik Cache
-Wipe Battery Stats
I choosed Install Custom Zip to install DX7. The console displayed few lines of code which I don't remember and this error:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Device or resource busy)
E: Can't mount /sdcard
After this my phone freezes on SE logo, I can't run xRecovery, system or even charge my phone. I tried to flash it using Flashtool, but it doesn't recognize my device.
Is there any chance to resurrect my Xperia? I want to use it again, even with the stock ROM?
Greetings
Yes it possible, and impossible to break your device for now - sometimes this problem exist, don't know why, and not only on my ROM - it's possible on all X10, I had it too one time when I wanted to flash Wolfbreak's ROM v4 (old time ). Let's back to your problem - you need to apply again Stock ROM 2.3.3 - install it via SEUS/PcCompanion (or FlashTool, but I suggest official app. If you can't flash via FT, then you need to update your drivers for X10), and then make Root, Busybox, and xRecovery 0.3, I suggest you GB ready (the newest FlashTool have it included all). Then problem should dissapear, without anything. I think it should help. Take care buddy .
DiKeJ I can't remember. Does Your ROM require an unlocked bootloader?
Sent from X10
Use this tool forum.xda-developers.com/showthread.php?t=1415600
Thank you very much, DiKeJ. My X10 has been saved!
But I still want to install DX7. What did I do wrong (or what's wrong with my SD card)? How can I make it work next time?
Anybody care to tell me how to get any of those methods to work? I got my x10 stuck at the SE logo while flashing, and I can't do anything with it. None of the programs can recognize it and it won't boot into recovery.
can you help me my x10i freeze at "Sony Ericsson" after rooting kernel help me please
im from philippines and i don't think we have sony ericsson care here
can you send me in my email? [email protected] please
I guess the best solution to get ride of this issue is to flash the stock full firmware and then do everything from the beginning.
To do that, you should visit this topic : [TOOL/X10] [UPDATE 07/04/2012] Flashtool version 0.6.9.0
Then flash a generic firmware(you choose whatever you like) using flashtool
Once your phone is booted, you can try to mod it as you wish.
If you would like to change the kernel, I advise you to unlock the bootloader : read the topic
Hope this gonna help
DiKeJ said:
Yes it possible, and impossible to break your device for now - sometimes this problem exist, don't know why, and not only on my ROM - it's possible on all X10, I had it too one time when I wanted to flash Wolfbreak's ROM v4 (old time ). Let's back to your problem - you need to apply again Stock ROM 2.3.3 - install it via SEUS/PcCompanion (or FlashTool, but I suggest official app. If you can't flash via FT, then you need to update your drivers for X10), and then make Root, Busybox, and xRecovery 0.3, I suggest you GB ready (the newest FlashTool have it included all). Then problem should dissapear, without anything. I think it should help. Take care buddy .
Click to expand...
Click to collapse
Hi, i have same problem and i try diferent things to make work, and wont work, still Sony Ericsson logo there, i try update service from Sony, any advice? I`m a noob about this.
I try to root the x10 with FlashTool, after that when i try yo flash to update kernel, logo freeze, i wait 10 minute, still freeze.
Can you or someone help me?
Thank you very much!
Edit: I fix the problem, with SEUS and a trick, i plug the usb in phone, press the BACK button, and then put the battery in the phone, and SEUS autodetect my phone, and now is updating.
Repair the phone using SEUS if nothing else give good results
zsec1021 said:
can you help me my x10i freeze at "Sony Ericsson" after rooting kernel help me please
im from philippines and i don't think we have sony ericsson care here
can you send me in my email? [email protected] please
Click to expand...
Click to collapse
It should work in x10i manong, just start from the beginning which you need apply again the stock 2.3.3 ROM from sony ericsson (sony mobile these days) via PC Suite then Root and install busybox and xRecovery 0.3 and the problem is solved. I tried it to my friend's phone which is x10i also, and it works. Just follow the instructions given by DiKeJ and you'll be fine. :good: