I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
marko! said:
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
Click to expand...
Click to collapse
When I have flashed a rom like DARKSIDE, which has the kernel built-in, the phone won't boot and I have the same issue, even though it has the correct kernel, unless I flash back to stock at&t kernel.
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
carlharsch said:
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
Click to expand...
Click to collapse
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
kent1286 said:
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
Click to expand...
Click to collapse
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
After installing a new kernel/rom, did you full wipe your phone?
Alcapone263 said:
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Sorry it took a while for me to get back to you, thanks for your suggestion, I did try this but still no results. I reflashed pudding and put recovery back and then tried flashing the kernel again but it still gives me the same result. Anyone have any other ideas i could try?
I also tried doing a full wipe after flashing the kernel as well, that didn't work either.
sorry man, i can't think of anything that might be causing that problem. you should send Faux123 a tweet and ask him about it, if he has spare time he might be able to help you out
Does anyone have any ideas i could try to get this workong? I'd really love to use faux's kernel on my atrix.
Sent from my MB860 using XDA Premium App
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
jgc121 said:
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
Click to expand...
Click to collapse
yes, i did, even though its already unlocked, and it just said that it was already unlocked
kent1286 said:
I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
Click to expand...
Click to collapse
bump.......Anyone have any suggestions as to how I can get this working please?
atrix 4g
im new to motorola android devices and have no clue what im doing. i have rooted my atrix but still dont know the whole process for installing everything. i have the rooted stock 2.3.6 bloated at&t rom.. is their a kernel i can install that will allow me to overclock on stock gb?
Sorry to tell you this my man but not all atrixeseses are made the same. I confirmed this by using 3 different atrixes (long story).
Sent from my A200 using xda app-developers app
Related
Here's the stock kernel from software ver 1.13.651.7, flashable through recovery, of course.
Thank you.
Sent from my PG86100 using XDA Premium App
Thanx for this.
Sent from my PG86100 using XDA Premium App
Finally! Thanks man!
Wow thanks.
thanks.........
Thanks dude. Not sure what I did but my battery started discharging crazy fast this morning, I had to switch back to stock.
[Kernel] Modified Stock 2.08.651.2 (2.6.35.13-g84f8edd)
Adding new kernel to new post.
Good looking man. Thanks.
Locked & Loaded
" Shooter on Deck"
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Dudemeister said:
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Click to expand...
Click to collapse
Do you have hboot 1.5? Just asking because there are ~2 more steps to take before flashing a kernel... Or I heard you can use Flash Image GUI.
Sent from my Infected EVO3D! Virus, you rock!
I flashed a AOSP kernel, and my rom didn't load. so I restored a backup and my wifi didn't work and also. So i flashed this kernel and now my backup doesn't work or even any rom that I have downloaded.
using viperrom before.
now nothing is working
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
im getting really sick of this evo3d.
TheFlatulentFox said:
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
Click to expand...
Click to collapse
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
SteelH said:
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
Click to expand...
Click to collapse
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
TheFlatulentFox said:
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I'm almost positive this kernel is WAY outdated (note the date of the OP)
Ok here's the point. I tried to flash another rom yesterday, and now i cannot log into motoblur. It says that there's a "problem with the phone's clock"..
What should I do?
What phone(international?)
What rom
Did you use the right kernel?try re flashing the rom
sent from my Atrix via XDA premium
marko! said:
What phone(international?)
What rom
Did you use the right kernel?try re flashing the rom
sent from my Atrix via XDA premium
Click to expand...
Click to collapse
I'm on an international, and the last kernel was the unified one, on Faux's thread. And everything begun after i've flashed Aura bloated version 1.1.2
EDIT: I've found the solution. For those who got the same problem FLASH BACK TO THE ORIGINAL KERNEL FROM THE FAUX'S THREAD.
It seems like it solved my problem. More feedback in an hour.
I successfully rooted my 1.5 hboot with HTC's official method. All my root apps work fine and I installed steel rom 2.01. My kernel version is
2.6.35.13-g84f8edd
I originally tried to flash synergy rom, this caused my phone to randomly (and frequently) reboot. I flashed steel rom and my phone is stable now. I downloaded the showdown kernel 2 from here at xda and flashed it by itself. I don't believe my kernel version changed; I would think it would say showdown something. My setcpu does not have any overclock capabilities right now.
Is this because I don't have s-off? If so, is there a way possible now to flash kernels on evo 3ds with the hboot v1.5?
Also if anyone has any tips on getting synergy to work I'd appreciate it.
Which synergy are you flashing? If you took the update and are on 2.3.4 you can't flash a 2.3.3 ROM. sounds like you are flashing an older synergy.
Edit: also there are no kernels for 2.3.4 out yet except the stock because HTC hasn't released the source code
Sent from my PG86100 using XDA Premium App
The file I downloaded was synergy-evo3d-unofficial-345.zip. It took me a while and some confusion to find it. I think the thread said the kernel was included in the rom. But I think it also said 2.3.4. I would rather be on 2.3.3 with a custom kernel.
I just flashed synergy revision 318 and it didn't flash the ziggy kernel. I cleared data before flashing. I see my vrsion of androi is 2.3.3, and I tried flashing the showdown Kellernel 2. Any ideas? It still says I have the stock htc kernel.
You can't flash a kernel if you rooted using HTC's unlocker method.
shuwoo said:
I just flashed synergy revision 318 and it didn't flash the ziggy kernel. I cleared data before flashing. I see my vrsion of androi is 2.3.3, and I tried flashing the showdown Kellernel 2. Any ideas? It still says I have the stock htc kernel.
Click to expand...
Click to collapse
HTC's unlock method doesn't let you flash kernels ( not to my knowledge but I could be wrong ) I've read several threads about people trying to flash kernels and it looking like it flashed, but didn't actually flash. BUT, your on 2.3.4, so you can't flash a 2.3.3 kernel. You gotta flash a 2.3.4 kernel. And the only losses kernel we have is freeza's kernel.
From what I understand, HTC's unlock method only allows write access to the system partition.
Sent from my PG86100 using XDA Premium App
First I followed the directions in this thread then installed CleanROM using the directions in this post and now my wi-fi isn't working. I tried doing a factory reset from recovery mode but it didn't work.
NoNotReally said:
First I followed the directions in this thread then installed CleanROM using the directions in this post and now my wi-fi isn't working. I tried doing a factory reset from recovery mode but it didn't work.
Click to expand...
Click to collapse
You need to flash the kernel again after you flash any new rom. If you are using the stock kernel, you need to flash that. If you were using ziggy's kernel, flash that one.
Kernels can cause issues because when we flash a ROM the kernel is not changed. You must make sure you flash the correct kernel for the ROM after you flash the ROM.
Using ziggy's kernel without also flashing the proper modules into the ROM causes wifi error.
Others have had this issue, do a quick search for kernel and wifi error, you will find more detailed info.
Marine6680 said:
Kernels can cause issues because when we flash a ROM the kernel is not changed. You must make sure you flash the correct kernel for the ROM after you flash the ROM.
Using ziggy's kernel without also flashing the proper modules into the ROM causes wifi error.
Others have had this issue, do a quick search for kernel and wifi error, you will find more detailed info.
Click to expand...
Click to collapse
Agreed. All of your answers are in the CleanROM thread. And if not, Scrosler is very responsive to questions over there.
I have the opposite problem. Was on stock using Ziggy's kernel. Flashed another ROM. Ziggy's kernel worked fine. I want to flash back to stock kernel, but no matter which way I do it, I lose WiFi.
I got my wifi working again.check out the stock kernels files posted here:
http://forum.xda-developers.com/showthread.php?t=1426270
Tikerz said:
I have the opposite problem. Was on stock using Ziggy's kernel. Flashed another ROM. Ziggy's kernel worked fine. I want to flash back to stock kernel, but no matter which way I do it, I lose WiFi.
Click to expand...
Click to collapse
Sent from my ADR6425LVW using XDA App
Izeltokatl said:
I got my wifi working again.check out the stock kernels files posted here:
http://forum.xda-developers.com/showthread.php?t=1426270
Click to expand...
Click to collapse
For the love of God, finally. The custom kernels kept bootlooping while I was sleeping and I depend on my phone to wake me up in the morning. Thanks!!
So many threads that I cannot find it. I am currently unlocked on nottachtrix 1.2.9b but it keeps restarting my phone randomly so I want to flash a completely stock ROM, can anyone point me in the right direction? Thanks guys!
searching dev forum returned this list of firmwares http://forum.xda-developers.com/showthread.php?t=1125944. Find your country/carrier and go for it.
As an alternative, I have used Aura (http://forum.xda-developers.com/showthread.php?t=1186990) and was better than stock for me and includes webtop.
If you feel adventurous again, try miui-us V4 2.3.16 also in the dev forum (http://forum.xda-developers.com/showthread.php?t=1383721).
Hope I was able to help
Check the Fruitcake thread, stock roms are there.
i-MAD said:
searching dev forum returned this list of firmwares http://forum.xda-developers.com/showthread.php?t=1125944. Find your country/carrier and go for it.
As an alternative, I have used Aura (http://forum.xda-developers.com/showthread.php?t=1186990) and was better than stock for me and includes webtop.
If you feel adventurous again, try miui-us V4 2.3.16 also in the dev forum (http://forum.xda-developers.com/showthread.php?t=1383721).
Hope I was able to help
Click to expand...
Click to collapse
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
jstrayy said:
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
Click to expand...
Click to collapse
You said your atrix is unlocked (or are you on Atrix2 since you mention Supercharged A2?), then root, install romracer's cwm for atrix and use cwm to reset, clear data and cache, then flash a rom of your choice.
All available in the dev section.
i-MAD said:
You said your atrix is unlocked (or are you on Atrix2 since you mention Supercharged A2?), then root, install romracer's cwm for atrix and use cwm to reset, clear data and cache, then flash a rom of your choice.
All available in the dev section.
Click to expand...
Click to collapse
The atrix 2 is mine, the atrix 1 is my girlfeiend's
Sent from my Supercharged A2
jstrayy said:
So many threads that I cannot find it. I am currently unlocked on nottachtrix 1.2.9b but it keeps restarting my phone randomly so I want to flash a completely stock ROM, can anyone point me in the right direction? Thanks guys!
Click to expand...
Click to collapse
I don't have any issues with 1.29b. Maybe flash romracers recovery, do a complete wipe, and flash 1.29b directly.
Sent from my Motorola Atrix using xda premium
co.ag.2005 said:
I don't have any issues with 1.29b. Maybe flash romracers recovery, do a complete wipe, and flash 1.29b directly.
Sent from my Motorola Atrix using xda premium
Click to expand...
Click to collapse
I did that already, since the issue is random I won't know for some time if it is fixed
Sent from my Supercharged A2
jstrayy said:
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
Click to expand...
Click to collapse
Downgrading the version risk bricking. I soft bricked mine when I went from 2.3.6(prior to a few ROMs) to 2.3.4.
I would:
Fastboot -w
RSD Lite flash 2.3.6 from //sites.google.com/site/motosbf/atrix-sbf-files (Sorry, I don't have enough posts to be allow to make links)
I found this on one of the topics here:
//dropbox.com/s/eps7ldsn9n5sqlc/At%26t 236-45-141_deodexed.zip
copy after // because I can't post links.
I'm yet to try it on my Atrix but will do very soon
smurf23 said:
I found this on one of the topics here:
//dropbox.com/s/eps7ldsn9n5sqlc/At%26t 236-45-141_deodexed.zip
copy after // because I can't post links.
I'm yet to try it on my Atrix but will do very soon
Click to expand...
Click to collapse
i have statusbar issues with that one...
I fixed the restarts by flashing the 2.3.6 sbf (not pudding), and I left it like that... no more unlock since I believe that was the issue. Every ROM I tried had the same results
Sent from my MB865 using xda premium
return to stock
Hi.I'm new here.I have some question if someone can help me.I have an Atrix 4g and i'm currently using Neutrino 2.7 EE version ROM.But i want to return to stock firmware from Europe without carrier branding and to do ota update.With this return to stock i want to unroot and lock my bootloader.So is it possible so return to stock and get official updates from Motorola without ruining my phone?Sorry for my bad english.
rocer said:
Downgrading the version risk bricking. I soft bricked mine when I went from 2.3.6(prior to a few ROMs) to 2.3.4.
I would:
Fastboot -w
RSD Lite flash 2.3.6 from //sites.google.com/site/motosbf/atrix-sbf-files (Sorry, I don't have enough posts to be allow to make links)
Click to expand...
Click to collapse
I have an Atrix 4G from AT&T and I Unlocked the bootloader, rooted the phone and upgraded it to CM9.
My Question is If I do this... Can I Downgrade my phone fro CM9 to 2.3.6 as it was before?
Thank you!!
rmena28 said:
I have an Atrix 4G from AT&T and I Unlocked the bootloader, rooted the phone and upgraded it to CM9.
My Question is If I do this... Can I Downgrade my phone fro CM9 to 2.3.6 as it was before?
Thank you!!
Click to expand...
Click to collapse
Yes. You can download the 2.3.6 fruitcake from fruitcake backup thread and flash via CWM. Then the 2.3.6 webtop and flash via CWM. Remember to perform a full wipe first.
Sent from my MB860 using xda premium
CaelanT said:
Yes. You can download the 2.3.6 fruitcake from fruitcake backup thread and flash via CWM. Then the 2.3.6 webtop and flash via CWM. Remember to perform a full wipe first.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Downloading.....
Thanks!!
here you go
http://forum.xda-developers.com/showthread.php?p=27245300#post27245300 go here
use this link for ATT downloads
http://forum.xda-developers.com/showthread.php?t=1583199