So many threads that I cannot find it. I am currently unlocked on nottachtrix 1.2.9b but it keeps restarting my phone randomly so I want to flash a completely stock ROM, can anyone point me in the right direction? Thanks guys!
searching dev forum returned this list of firmwares http://forum.xda-developers.com/showthread.php?t=1125944. Find your country/carrier and go for it.
As an alternative, I have used Aura (http://forum.xda-developers.com/showthread.php?t=1186990) and was better than stock for me and includes webtop.
If you feel adventurous again, try miui-us V4 2.3.16 also in the dev forum (http://forum.xda-developers.com/showthread.php?t=1383721).
Hope I was able to help
Check the Fruitcake thread, stock roms are there.
i-MAD said:
searching dev forum returned this list of firmwares http://forum.xda-developers.com/showthread.php?t=1125944. Find your country/carrier and go for it.
As an alternative, I have used Aura (http://forum.xda-developers.com/showthread.php?t=1186990) and was better than stock for me and includes webtop.
If you feel adventurous again, try miui-us V4 2.3.16 also in the dev forum (http://forum.xda-developers.com/showthread.php?t=1383721).
Hope I was able to help
Click to expand...
Click to collapse
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
jstrayy said:
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
Click to expand...
Click to collapse
You said your atrix is unlocked (or are you on Atrix2 since you mention Supercharged A2?), then root, install romracer's cwm for atrix and use cwm to reset, clear data and cache, then flash a rom of your choice.
All available in the dev section.
i-MAD said:
You said your atrix is unlocked (or are you on Atrix2 since you mention Supercharged A2?), then root, install romracer's cwm for atrix and use cwm to reset, clear data and cache, then flash a rom of your choice.
All available in the dev section.
Click to expand...
Click to collapse
The atrix 2 is mine, the atrix 1 is my girlfeiend's
Sent from my Supercharged A2
jstrayy said:
So many threads that I cannot find it. I am currently unlocked on nottachtrix 1.2.9b but it keeps restarting my phone randomly so I want to flash a completely stock ROM, can anyone point me in the right direction? Thanks guys!
Click to expand...
Click to collapse
I don't have any issues with 1.29b. Maybe flash romracers recovery, do a complete wipe, and flash 1.29b directly.
Sent from my Motorola Atrix using xda premium
co.ag.2005 said:
I don't have any issues with 1.29b. Maybe flash romracers recovery, do a complete wipe, and flash 1.29b directly.
Sent from my Motorola Atrix using xda premium
Click to expand...
Click to collapse
I did that already, since the issue is random I won't know for some time if it is fixed
Sent from my Supercharged A2
jstrayy said:
Thanks a lot! And if I use rsd to flash the 2.3.4 SBC it won't brick my phone right? It was at 2.3.6 before
Sent from my Supercharged A2
Click to expand...
Click to collapse
Downgrading the version risk bricking. I soft bricked mine when I went from 2.3.6(prior to a few ROMs) to 2.3.4.
I would:
Fastboot -w
RSD Lite flash 2.3.6 from //sites.google.com/site/motosbf/atrix-sbf-files (Sorry, I don't have enough posts to be allow to make links)
I found this on one of the topics here:
//dropbox.com/s/eps7ldsn9n5sqlc/At%26t 236-45-141_deodexed.zip
copy after // because I can't post links.
I'm yet to try it on my Atrix but will do very soon
smurf23 said:
I found this on one of the topics here:
//dropbox.com/s/eps7ldsn9n5sqlc/At%26t 236-45-141_deodexed.zip
copy after // because I can't post links.
I'm yet to try it on my Atrix but will do very soon
Click to expand...
Click to collapse
i have statusbar issues with that one...
I fixed the restarts by flashing the 2.3.6 sbf (not pudding), and I left it like that... no more unlock since I believe that was the issue. Every ROM I tried had the same results
Sent from my MB865 using xda premium
return to stock
Hi.I'm new here.I have some question if someone can help me.I have an Atrix 4g and i'm currently using Neutrino 2.7 EE version ROM.But i want to return to stock firmware from Europe without carrier branding and to do ota update.With this return to stock i want to unroot and lock my bootloader.So is it possible so return to stock and get official updates from Motorola without ruining my phone?Sorry for my bad english.
rocer said:
Downgrading the version risk bricking. I soft bricked mine when I went from 2.3.6(prior to a few ROMs) to 2.3.4.
I would:
Fastboot -w
RSD Lite flash 2.3.6 from //sites.google.com/site/motosbf/atrix-sbf-files (Sorry, I don't have enough posts to be allow to make links)
Click to expand...
Click to collapse
I have an Atrix 4G from AT&T and I Unlocked the bootloader, rooted the phone and upgraded it to CM9.
My Question is If I do this... Can I Downgrade my phone fro CM9 to 2.3.6 as it was before?
Thank you!!
rmena28 said:
I have an Atrix 4G from AT&T and I Unlocked the bootloader, rooted the phone and upgraded it to CM9.
My Question is If I do this... Can I Downgrade my phone fro CM9 to 2.3.6 as it was before?
Thank you!!
Click to expand...
Click to collapse
Yes. You can download the 2.3.6 fruitcake from fruitcake backup thread and flash via CWM. Then the 2.3.6 webtop and flash via CWM. Remember to perform a full wipe first.
Sent from my MB860 using xda premium
CaelanT said:
Yes. You can download the 2.3.6 fruitcake from fruitcake backup thread and flash via CWM. Then the 2.3.6 webtop and flash via CWM. Remember to perform a full wipe first.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Downloading.....
Thanks!!
here you go
http://forum.xda-developers.com/showthread.php?p=27245300#post27245300 go here
use this link for ATT downloads
http://forum.xda-developers.com/showthread.php?t=1583199
Related
I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
marko! said:
The right kernal flashes automatically with most roms
sent from my Atrix via XDA premium
Click to expand...
Click to collapse
When I have flashed a rom like DARKSIDE, which has the kernel built-in, the phone won't boot and I have the same issue, even though it has the correct kernel, unless I flash back to stock at&t kernel.
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
carlharsch said:
He has a GB version and a CM version out. Are you sure you're using the correct version for your rom?
Click to expand...
Click to collapse
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
kent1286 said:
yes, I have tried the GB AT&T/Unified Version for when i have flashed a GB Rom and I tried the CM7 Kernel for when I flashed CM7, neither kernel was working for their respective roms.
Click to expand...
Click to collapse
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
After installing a new kernel/rom, did you full wipe your phone?
Alcapone263 said:
Have you tried to reflash pudding and reinstalling your recovery afterwards? Just be sure to reflash the right sbf
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Sorry it took a while for me to get back to you, thanks for your suggestion, I did try this but still no results. I reflashed pudding and put recovery back and then tried flashing the kernel again but it still gives me the same result. Anyone have any other ideas i could try?
I also tried doing a full wipe after flashing the kernel as well, that didn't work either.
sorry man, i can't think of anything that might be causing that problem. you should send Faux123 a tweet and ask him about it, if he has spare time he might be able to help you out
Does anyone have any ideas i could try to get this workong? I'd really love to use faux's kernel on my atrix.
Sent from my MB860 using XDA Premium App
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
jgc121 said:
Have you gone through the fastboot oem unlock commands after flashing the pudding sbf?
Click to expand...
Click to collapse
yes, i did, even though its already unlocked, and it just said that it was already unlocked
kent1286 said:
I've tried again and again, following multiple sets of directions, but for some reason, whenever I try to flash faux's OC UV GB Kernel for my AT&T Atrix, the phone won't boot or get past the boot screen. I have no idea why this could be happening and have tried whatever I could think of to fix the problem but no luck so far.
I've tried to flash previous versions as well as the latest version of faux's kernel using Romracer's latest CWM, but it hasn't worked. I keep having to flash back to the stock AT&T kernel to get the phone to boot up. I've tried this on the HomeBase Rom, DARKSIDE Rom and on the Alien Rom. The ROMs work fine with the stock kernel though.
I also tried flashing CM7 and faux's CM7 but that didn't work either.
Anyone think of why this could be happening and have any suggestions that I could try to get this working?
Thanks in advance for the help.
Click to expand...
Click to collapse
bump.......Anyone have any suggestions as to how I can get this working please?
atrix 4g
im new to motorola android devices and have no clue what im doing. i have rooted my atrix but still dont know the whole process for installing everything. i have the rooted stock 2.3.6 bloated at&t rom.. is their a kernel i can install that will allow me to overclock on stock gb?
Sorry to tell you this my man but not all atrixeseses are made the same. I confirmed this by using 3 different atrixes (long story).
Sent from my A200 using xda app-developers app
Is bootstrap recovery the same as clockwork recovery? Are they one and the same?
Also I'm on kernal 2.3.4 do I have to do anything special if I want to load a 2.3.5 rom?
Sorry I'm new to playing around with motorola phones.
I thought they were the same when I first started hacking my phone. But it turns out they are not the same.
As for updating your phone to 2.3.5, if you are on stock 2.3.4, all you need to do is root your phone, install bootstrap recovery and flash the 2.3.5 ROM using bootstrap recovery.
There is a nice guide someone put together in the dev. Section.
Sent from my DROID X2 using xda premium
Basically, yes - those recoveries a almost the same. They are both used in the same way, which is to backup/restore, wipe data and flash a ROM. So there's no real difference.
As for the 2.3.4 kernel. SOME people can get away with flashing a 2.3.5 based ROM on their 2.3.4, others can't. Either way, I'd recommend just updating to 2.3.5 to safe. Plus (to me), 2.3.5 seems smoother and faster.
To Update to 2.3.5, just download the update.zip from here: http://www.multiupload.com/0ZT7FTOW0R
This is just the update file, so all you need to do is flash that, but I won't get into much about that.
If you need a guide on updating it, then you can look at this one right here: http://forum.xda-developers.com/showthread.php?t=1391824
That's the one I used.
Ok so I'm currently on Molten 2.2 wich is a 2.3.4 romand was looking at liberty rom wich is 2.3.5 rom. So all I would need to do is just clear the needed data and flash it like any other rom?
The reason for asking about if it was clockwork was because in one of the roms the instructions says to use clockwork and I never saw a like to clockwork in the dev section
Yes I looked in the stickies first and these were just the questions that popped up that I didn't see the answer to it. I may have just over looked it but I figured I would ask before I borked my phone lol
looks like while I was writing a responce some one answered lol thank you all for your help
U don't need to root to install 2.3.5
It is signed by moto so we can flash in stock recovery
(actually that's how you SHOULD FLASH 2.3.5)
And our BSR is a hacked/ported cwm
To update to 2.3.5 you WILL need to be STOCK (you CAN be rooted but it will take away root when u flash it....just root again with zergrush...)
bsannes said:
Ok so I'm currently on Molten 2.2 wich is a 2.3.4 romand was looking at liberty rom wich is 2.3.5 rom.
Click to expand...
Click to collapse
Just so you know, Liberty is a 2.3.4 rom. Have a look at the OP in that thread. If you're on Molten, just wipe data and cache and you should be set.
Ok, my atrix is running a Faux 1.3ghz kernel, CM10 v2.0 by jokersax. I want to get back to stock as possible. My backup of my original is no longer with us. Can I install fruitcake 2.3.6 with webtop with this kernel or do I need to flash a different one? If so, which one. I can use CWM well, but just don't want to brick my only phone before I upgrade in Oct.
MadJoe11 said:
Ok, my atrix is running a Faux 1.3ghz kernel, CM10 v2.0 by jokersax. I want to get back to stock as possible. My backup of my original is no longer with us. Can I install fruitcake 2.3.6 with webtop with this kernel or do I need to flash a different one? If so, which one. I can use CWM well, but just don't want to brick my only phone before I upgrade in Oct.
Click to expand...
Click to collapse
You could just use the Motorola software to flash the whole thing back to stock.
http://direct.motorola.com/hellomoto/motosupport/source/softwareupdatesummary.asp
daveschz said:
You could just use the Motorola software to flash the whole thing back to stock.
http://direct.motorola.com/hellomoto/motosupport/source/softwareupdatesummary.asp
Click to expand...
Click to collapse
No. Don't. Use fruit cakes by Sam Cripp. They are your friend...
daveschz said:
You could just use the Motorola software to flash the whole thing back to stock.
http://direct.motorola.com/hellomoto/motosupport/source/softwareupdatesummary.asp
Click to expand...
Click to collapse
You should think twice before you give out advice like that. Flashing through official methods is a sure way to brick your phone.
well, If I wanna to go back to stock i have stock SBF file, but I've got INTL Atrix so I won't get brick
I am considering making a youtube video of restoring my Atrix to stock using rsd because a lot of people think this is like crawling over a live landmine. It is totally *safe if you know what you're doing.
Sent from my Nexus 7 on official CM10
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
MadJoe11 said:
Ok, my atrix is running a Faux 1.3ghz kernel, CM10
Click to expand...
Click to collapse
What?
Sent from my Nexus 7 on official CM10
MadJoe11 said:
Ok, my atrix is running a Faux 1.3ghz kernel, CM10 v2.0 by jokersax. I want to get back to stock as possible. My backup of my original is no longer with us. Can I install fruitcake 2.3.6 with webtop with this kernel or do I need to flash a different one? If so, which one. I can use CWM well, but just don't want to brick my only phone before I upgrade in Oct.
Click to expand...
Click to collapse
Simple. Just flash the 2.3.6 fruitcake and webtop as you suggested, then flash a Faux 1.3GHz GB kernel. Make sure to do a full wipe via fastboot first.
Don't flash SBF's. That should be considered a last resort!
http://forum.xda-developers.com/showthread.php?t=1583199
Sent from my MB860 using xda premium
okay so I read through some of the threads and I still don't know how to fix my issue. I rooted my phone using Odin v 1.85 and used siyah 3.4.2. I did it successfully and everything was good. I then gave the phone to my cousin and he said he performed a factory reset to get rid of everything on the phone ( contacts ,etc). Now when I turn on the phone it shows the samsung galaxy display with the triangle and then the screen goes black and just blinks. It still goes back into download mode I just dont know what to do to fix the problem. I know I'm a noob but please HELP!!!
Development section. You'll find the stickies that show how to flash stock packages with Odin. Go back to stock to fix your issue. You should then be able to load a new kernel and flash a custom rom.
Oh, and never let that cousin touch the phone again.
Sent from my SGH-I777 using xda premium
Red_81 said:
Development section. You'll find the stickies that show how to flash stock packages with Odin. Go back to stock to fix your issue. You should then be able to load a new kernel and flash a custom rom.
Oh, and never let that cousin touch the phone again.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thank you! I went back to stock and everything seems to be back in order. I used
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
to get back to stock. My question is can I flash a new Rom for example
http://forum.xda-developers.com/showthread.php?t=2076718
or ShoStock3??? thank you
mmoncay11 said:
Thank you! I went back to stock and everything seems to be back in order. I used
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
to get back to stock. My question is can I flash a new Rom for example
http://forum.xda-developers.com/showthread.php?t=2076718
or ShoStock3??? thank you
Click to expand...
Click to collapse
You will need to root first. If you did not flash the stock plus root package already, flash that, and then install a custom kernel which has ClockworkMod Recovery. Then you can flash any firmware.
There is a good guide linked in my signature.
creepyncrawly said:
You will need to root first. If you did not flash the stock plus root package already, flash that, and then install a custom kernel which has ClockworkMod Recovery. Then you can flash any firmware.
There is a good guide linked in my signature.
Click to expand...
Click to collapse
Thanks. I Used "Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders" to go back to stock.
I'm going to install Mobile Odin lite, I already found the flash kernel for the I-777. After installing both of these I should be good to flash the ROM of my choice by just putting the rom on the sd card right?
mmoncay11 said:
Thanks. I Used "Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders" to go back to stock.
I'm going to install Mobile Odin lite, I already found the flash kernel for the I-777. After installing both of these I should be good to flash the ROM of my choice by just putting the rom on the sd card right?
Click to expand...
Click to collapse
Flash a kernel with ClockworkMod Recovery, then boot into recovery and flash the firmware. Mobile Odin can't handle the CWM flashable zip format.
There is a Siyah kernel for gingerbread that would give you CWM so you could then flash a custom rom. It would be in the development section. Just make sure you grab the version for gingerbread and not ics
Sent from my SGH-I777 using xda premium
Red_81 said:
There is a Siyah kernel for gingerbread that would give you CWM so you could then flash a custom rom. It would be in the development section. Just make sure you grab the version for gingerbread and not ics
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
oh okay have CWM now. So now I just go into recovery and flash the firmware correct?
Yep. Follow the directions of the rom you want to flash
Sent from my SGH-I777 using xda premium
hiartic the
Red_81 said:
Yep. Follow the directions of the rom you want to flash
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks alot. Any Roms you recommend ?
I know this is pretty noobish but will backing up on the internal sd card cause any problems?
mmoncay11 said:
I know this is pretty noobish but will backing up on the internal sd card cause any problems?
Click to expand...
Click to collapse
I assume you mean nandroid backup from ClockworkMod Recovery? No. It's mainly a space issue, where you want to store them, because they take up quite a bit of space, especially if you have several.
mmoncay11 said:
Thanks alot. Any Roms you recommend ?
Click to expand...
Click to collapse
The general answer you will get around here is try them all. You can see what I like by looking in my signature.
I like both Shostock3 and the collective's rom. I don't think there is a bad rom on here.
Sent from my SGH-I777 using xda premium
mmoncay11 said:
Thanks alot. Any Roms you recommend ?
Click to expand...
Click to collapse
Depends on which OS version firmware you want.
I like Eclair and Froyo
Hi everyone, is nice to be part of this big comunity!
A few months ago i bought an atrix 4g att that came with cyanogenmod 7.2, naturally i didn't know about the original firmware version and i'm very tired of trying roms and roms and roms, so i want to restore my device to its original state (factory reset). i've found the motorola software update and it's telling me that there is available a new update to my device. The question is, if is possible to update from this motorola software without any risk??
If is not possible, there is another way to restore my device to factory?
Thank you! and sorry for my english, i know is bad.
Jhonny9211 said:
Hi everyone, is nice to be part of this big comunity!
A few months ago i bought an atrix 4g att that came with cyanogenmod 7.2, naturally i didn't know about the original firmware version and i'm very tired of trying roms and roms and roms, so i want to restore my device to its original state (factory reset). i've found the motorola software update and it's telling me that there is available a new update to my device. The question is, if is possible to update from this motorola software without any risk??
If is not possible, there is another way to restore my device to factory?
Thank you! and sorry for my english, i know is bad.
Click to expand...
Click to collapse
Wipe system, cache, data, osh. Flash a fruitcake via cwm or flash a sbf via rds. There is a thread that gives the 4.5.145 (2.3.6) update thats flashable via cwm, that would be the easiest.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Wipe system, cache, data, osh. Flash a fruitcake via cwm or flash a sbf via rds. There is a thread that gives the 4.5.145 (2.3.6) update thats flashable via cwm, that would be the easiest.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Do i need to know my current firmware to update the 4.5.145???. Cause i have no idea....
Jhonny9211 said:
Do i need to know my current firmware to update the 4.5.145???. Cause i have no idea....
Click to expand...
Click to collapse
No, if you flash the 4.5.145 update from the thread via cwm, current firmware isn't relevant. Its like flashing a custom ROM, only difference is that its fully Blurred and non CM.
Sent from my MB860 using xda app-developers app