[Q] Can someone help me out, phone screen doesnt turn back on - Thunderbolt Q&A, Help & Troubleshooting

Hey guys,
My thunderbolt rooted with GingerTheory Rom installed, lately ive noticed when trying to hang up on phone calls (phone away from face) the screen doesnt turn back on for me, i have to hit the power button to bring the screen back on just to hang up.. it's very annoying. Can anyone help me resolve this issue ?
I dled "root tools" i cant get current value for proximity sensor setting.. what should i set it to ? Thanks in advance

have you tried blowing condensed air through the speaker grill? Probably got dust in there.

Related

[Q] HTC Amaze Screen Goes Black After Ending Phone Call

I have Speed Rom 5.1 on my Amaze. When I am finished with a call, the screen stays black. I try to hit the power button, but nothing happens. I have to remove my battery in order to reboot. Can someone shed some light on why this happening? I am thinking that it may have something to do with my CPU Tuner settings, but I am not sure.
mrcash101 said:
I have Speed Rom 5.1 on my Amaze. When I am finished with a call, the screen stays black. I try to hit the power button, but nothing happens. I have to remove my battery in order to reboot. Can someone shed some light on why this happening? I am thinking that it may have something to do with my CPU Tuner settings, but I am not sure.
Click to expand...
Click to collapse
Probably that or a bad flash, just reflash, see if it solves the issue.
Most likely it's something simple, like an issue with your proximity sensor. I know there was an app that could calibrate that but I forgot what the app was.
Stock Rom - Black screen while phoning
There is a similar problem on my wife's phone with a stock rom (not rooted Amaze from T-Mobile). When making or accepting a call, the screen will instantly go off even without leaning the phone against anything and won't turn on unless the power button is pressed. Sometimes the screen would turn on by itself after a while after the other phone was hanged.
I've downloaded AndroSensor app: the proximity value does't change even when touching the area near the earpiece. It keeps showing ( 0.5mA ) 3.5 in.
I've found a thread which is there since april 2012 and describes quite a similar problem.
okay.. i just the original post date for this thread.. please don't bring back threads that are 6 month's old which issues might have been solved already since no ones been posting in it for 6 months...
(anyways) this is what i was gonna say
on my current s3 when my phone is placed to my ear it cuts off the display.. and if you pass your hand anywhere near the sensor's to the top near the camera it cuts off the display.. maybe there's a feature like that enabled on the stock rom also.. or you could possible check with the system settings to see "screen" on/off settings in display or power saving mode.. or something...
Thanks for the answer. I didn't notice that the thread was that old. I think I will keep up a newer one. But the current issue isn't likely to have been solved.
The problem doesn't seem to be triggered by wrong sensor measures (because the screen will go off even after disabling the sensor) nor does it depend on the rom version (same thing on the CM10).
Resolved:
It will sound stupid but I have found a simple solution:
I have just wiped the screen in the upper left corner where the proximity sensor is located and it started behaving normally. Though I don't use any protection tape on the screen it seem to have become less sensitive because of mud or sweat.

Screen turns on when on call using bluetooth headset

Hello everybody.
I have a rooted 4.0.4 XXLFB Galaxy S3 and have noticed a problem.
Whenever I'm on a call using my blueooth headset, the screen turns on once every 30 seconds, give or take.
It's a problem because if I have the phone in my pocket, sometimes I mute the call, other times I turn off the headset...
Does anybody know how to solve this?
Thanks in advance.
Posting to add a "me too" to the list. Trying a ton of different things, almost to the point of clean device.
Hit the button and the screen turns off, about 2-5 seconds later, screen turns back on. Does not matter what I do. Seems to do it with speakerphone option too. If neither Bluetooth nor speakerphone are used, and you put the phone to your ear, backlight stays off. Otherwise, it automatically turns back on by itself. Tried with wifi on/off, speaker with bt on/off, different headsets, etc. My Wife's does not have this issue, so I gotta look into what is different. There has gotta be a setting or app installed that is doing this. I've even tried apps such as screebl and others. Some even had a thing to say lock it off till press button, and it still comes back on after 2-5 seconds. I've muted and hung up on many people when the phone was in my pocket because of this issue.
I've not used a BT headset but i'm thinking that maybe because the phone isn't against your head the screen comes on. possibly to give you information about the caller.
I'm not saying you should put the phone to your head even though your using bluetooth either.
thanks, but, don't help, tried that too. Had entire top half of phone covered during most tests. Screen does not turn off unless I press button, then comes back on automatically after 2-5 seconds. I did find one app today that seemed to work, but not sure if it works too well "Smart Screen Off".
Sounds silly but have you tried locking the handset?
That's what I meant by pressing the button. Button on right side that if I am not on a call, turns off screen and locks it.
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
visegrip72 said:
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
Click to expand...
Click to collapse
agree with the above. if you leave call status up while connected via BT headset, screen remains active (comes in and out). if you exit active call status (ie press home) then the screen timeout works. if you are talking on the phone without headset, no problem.
so yes, that's the prob. any solid fix yet?
please and thanks....
visegrip72 said:
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
Click to expand...
Click to collapse
Thanks a lot, visegrip. It was really frustating having to redial every other call because i hang up without noticing.
Any solution to this problem? Hitting a home button and locking the phone is not an option when I keep my phone in a leather holster on my belt. That's a main reason for having bluetooth as hands free.
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Almazick said:
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Click to expand...
Click to collapse
Almazick,
It would be great if you can send me the fix!
ital1981 said:
Almazick,
It would be great if you can send me the fix!
Click to expand...
Click to collapse
Here is the fix for a screen that I created. Let me know if it works or not for you.
http://www.mediafire.com/download.php?1ikj7d4wnjs9hx5
Almazick said:
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Click to expand...
Click to collapse
You know, I use tasker and have been trying to figure this out for a while. I've also been trying Secure settings and Locale Using multiple settings and plug-ins. I have not been able to create anything yet that seems completely reliable.
Not trying to be rude or anything, but I am and always have been a little leary of installing APK files unless I know the source. However, if you would be so kind to post the contexts and tasks so that I may enter them myself manually, it would be greatly appreciated. Thank you in advance.
Inane65 said:
You know, I use tasker and have been trying to figure this out for a while. I've also been trying Secure settings and Locale Using multiple settings and plug-ins. I have not been able to create anything yet that seems completely reliable.
Not trying to be rude or anything, but I am and always have been a little leary of installing APK files unless I know the source. However, if you would be so kind to post the contexts and tasks so that I may enter them myself manually, it would be greatly appreciated. Thank you in advance.
Click to expand...
Click to collapse
Well, It's pretty easy.
Profile -> Phone Offhook
Task:
Wait 20 seconds
App-> Go Home
Display -> System Lock
In case if you'll have any problems just use my apk file which is exactly the same.
Good news! I just took the Jelly Bean update from sprint & this problem is FIXED!
I tried calling and turned off the screen and it stayed off!
I also called and didn't touch the screen and after the timeout, it turned itself off!
Hmmmmm... OK. Thank you. I'll have to try that and see how it works. I was looking, hoping and working on trying to get something that would keep the screen off. Dialing, talking and ending the call. I've got something that seems to work for the most part, (I still get quick flashes, which is fine) but still have some more work to do on it.
Sent from my ADR6425LVW using xda premium
visegrip72 said:
Good news! I just took the Jelly Bean update from sprint & this problem is FIXED!
I tried calling and turned off the screen and it stayed off!
I also called and didn't touch the screen and after the timeout, it turned itself off!
Click to expand...
Click to collapse
It's not fixed. I'm getting crazy about this master bug.

display crash when calling

We have here a i9300 phone from which the display turns black (as if the screen is switched off) when there is a call being made. The call can not be ended because of the black screen. Home button wont help to switch the screen back to the home screen and the only thing which helps to get the screen back is when the call is answered and the other end hangs up. This happens on different firmware, factory reset did not help. Happens on Omega ROM and om CM10 ROM ... and even on stock which we just flashed back on it. Looks like the proximity chip gets confused and seem to think the phone is kept to the ear. So different Modems have the same result ... Any idea what might be wrong? ... Hardware bug?

[Q] screen turns off when touching sensor next to front camera

hi all
i have spent almost 2 days for an answer , no luck
my problem is
my phone s3 lte . screen turns of as soon as i obstruct the front camera and the 2 sensors area . it was ok before , since few days it started doing this . now i cant take screen shot pictures by moving my palm across the screen for example , not sure what this is due to
any help please .?
You've posted in the wrong section, questions go in q&a section -those for the i9305 stand more chance of a reply that won't brick your phone in the special q&a for LTE phones.
Report your own post and ask for it to be moved.
Having said all that, you've probably got a corrupt framework or a hardware fault. Flash a fresh official stock rom after a factory reset to test. If it's still the same then send for repair.
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
tonyt3rry said:
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
thank you all for helping , i have switched the phone off removed battery and now sorted .
it was not during call only but all the time .
it seems that the problem resolved on its own .phone was scared of me posting in xda lol
thx
Screen Blanks out on Galaxy tab
I ran this test and your screen is only supposed to change color from white to green during the test. My screen blanks out completely during the test.
Not sure if the sensor is bad or if it is a software or and OS issue yet.
you tube.c om /watch?v=N8G6ksaciho
Need advice.
I just received a SM-T705Y, KitKat. When I am in only some applications not all, the screen shuts completely off when my finger passes over the two sensors/camera near the word "SAMSUNG" at the top of the device. I have tested the cause and done it repeatedly by putting a small piece of black electrical tape on the sensor.
With the tape on the sensor, the screen never shuts off. The screen then will come back on several seconds after I remove my finger/tape from the sensor. Also, I do not have to actually touch the sensor to get the screen to turn off. But it activates the lock screen when it does turn off. ANNOYING !!!
My SM-T705Y is not rooted. It is in developer mode.
I think its the sensor that turns the screen off when you take a phone call is still stuck on ???
I have the phone proximity sensor turned off in: Settings> When I'm the phone screen The screen stays on.
Auto adjust screen tone : ON
Auto brightness is off
I have the "Smart Stay" turned off in: Settings>Device>Display.
Screen timeout set to 10 minutes. Screen mode set to "AMOLED Cinema"
I have restarted, not rebooted the SM-T705Y
forums. android central.com/lg-optimus-g-pro/
358206-screen-goes-black-when-front-facing-camera-covered
forums.android central.com/andro
id-4-1-4-2-4-3-jelly-bean/309867-screen-goes-off-when-my-hand-passes-camera
android forums.com/threads/screen-turns
-off-when-camera-blocked.746785
Milwaerinc at gmail.com
.
The proximity sensor is located there. That's why you have that issue. It's normal behaviour.
If you are trying to turn the screen off during calls there is an option to do so in either calls settings or display settings.
If you move the phone away from your head it will turn the screen on. It's a proximity sensor, thats its job!.
Beamed in by telepathy.
Fix
I have same problem with my samsung and I fix it!
Just close all recently used app (press button next to menu button and close all) and you will have normal screen..... Looks like some app, especially call app make problem and activating proximity sensor. So one more time close all recently used app, press button next to menu button and close all app....
Good Luck!
Marko

[Q] LG G2 D802 problem when making or answering a call

Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
help reguading the g2 screen blackout during calls
madafis said:
Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
Click to expand...
Click to collapse
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Blank Screen
I am having sort of the same issue. But mine is wether in a well lit room or dark room it doesn't matter.
I noticed that it usually happens when i receive a call, after the conversation when i hang up it does not go back to the home screen. all i get is a blank screen. the only way i can get it to generate the home screen again is by pulling down the status bar and going into the general settings and clicking home button again.
during this blank screen i can still see the status bar, and when i bring down the status bar i can see the nav buttons but they are unresponsive.
I also noticed this takes place sometimes after closing an app (noticed on netflix)
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
SOMEONE PLEASE HELP.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Click to expand...
Click to collapse
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
VS980 Black Screen
I have a customer phone that I replaced the LCD and Digitizer on. The new screen works fine but...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
The SIM Card is not activated but it is recognized by the phone.
Has anyone else had this issue? I tried a factory restore with no luck.
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
Click to expand...
Click to collapse
Hi,
I have the same issue , my screen turns black when calling or receiving calls , i m not really good with my hands... so do you know other solutions to disable the proximity sensor ?
thanks
Same issue here - LG G2 screen turn off and goes blank during conversations
I have exactly the same issue - LG G2 D802 screen turn off and goes blank during conversations.
Thanks to @Bam9 and @EtherBoo , who suggested to clear the proximity sensor from the outside and squeeze the top left corner of the phone, I tried to clean it and put some stress on it - and it worked!
Another issue which I also have and is also caused by the proximity sensor is that the screen stays on and the touch buttons in the dialer aren't responsive - which means we can't switch to speaker, add a call, mute, etc... However, the main touch / navigation button (home, back and menu buttons in the bottom of the screen) are responsive, in addition to the status bar.
(This issue was already reported by @athorax here)
In both of these situations the only quick way to end a call is to pull down the status and notifications bar and hang up from there.
I have a glass screen protector (which don't block the proximity sensor), and I am rooted and using CyanogenMod 11 ROM.
I used ioroot to root and AutoRec, which comes with TWRP 2.7.0.0, to install CyanogenMod ROM.
However, going back to stock ROM (in my case, LG G2 D802, it's D80220C) won't help since the issue still exists.
What I'm sure is that it was pretty much okay in the beginning, and the situation became worse and worse - occurring randomly, until it arrived to a situation in which I can't use the phone properly during conversation.
Now that I discovered that I can put some stress on the proximity sensor it seems that I have a hardware rather than a software issue.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
...
i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
...
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having.
Click to expand...
Click to collapse
So for you it was a software issue?
Is your sensor working until today with no issues?
ingoljosh said:
I am having sort of the same issue.
...
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
Click to expand...
Click to collapse
I'm also rooted and with TWRP.
Did it happened before you rooted?
Did you used ioroot to root andAutoRec to have TWRP?
You see, I'm really trying to find the similarities between us all in order to solve this issue...
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.
Click to expand...
Click to collapse
We already have KitKat based firmware update. For me it's D80220C.
For you it might be already D80220D. Use this link to check your version, and replace the IMEI in the end of it with your IMEI.
BobbyLG said:
...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
Has anyone else had this issue? I tried a factory restore with no luck.
Click to expand...
Click to collapse
When you place the call you do hear that the call is made?
If so - then you have exactly the same issue.
What is your model, what ROM are you using, and did you root your phone?
I have LG G2, unable to make call. The signal strength is fine. I have tried reinserting the sim. but i am able to receive calls. when i make a call the dialup screen come up and call ended automatically. Any Help

Categories

Resources