im trying to unlock bootloader and i have downloaded the pudding sbf file (derpunlock.sbf)
but with no succes it failed everytime im trying to flash
flash error log :
00:41:34, October 07, 2011
Line: 768
ERROR: Phone[0001]: The "Secure_Motorola_Flash" Interface could not be found.
The super-file is secure and for re-flash;
the phone needs a super-file that is not secure and not for re-flash.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\MIFlash.cpp
Device ID: 1
00:41:34, October 07, 2011
Line: 610
ERROR: Flash failure: Phone[0001]: The "Secure_Motorola_Flash" Interface could not be found.
The super-file is secure and for re-flash;
the phone needs a super-file that is not secure and not for re-flash. (Error Code: 66),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=255
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 1
please help , thanks
salim said:
im trying to unlock bootloader and i have downloaded the pudding sbf file (derpunlock.sbf)
but with no succes it failed everytime im trying to flash
flash error log :
00:41:34, October 07, 2011
Line: 768
ERROR: Phone[0001]: The "Secure_Motorola_Flash" Interface could not be found.
The super-file is secure and for re-flash;
the phone needs a super-file that is not secure and not for re-flash.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\MIFlash.cpp
Device ID: 1
00:41:34, October 07, 2011
Line: 610
ERROR: Flash failure: Phone[0001]: The "Secure_Motorola_Flash" Interface could not be found.
The super-file is secure and for re-flash;
the phone needs a super-file that is not secure and not for re-flash. (Error Code: 66),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=255
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 1
please help , thanks
Click to expand...
Click to collapse
1) Take a deep breath - everything is okay
2) You're supposed to get that error
3) Pull the battery after your phone freezes up
4) Get into fastboot mode (power + Vol down)
5) Run the Moto-fastboot command to confirm being unlocked
You're set!
thanke u for helping ,
i just run the cmd command moto-fastboot and it has show me a list of options and commands... thats what it should happens ?
and when i reboot in fastboot it havent shown me that it unlocked... ( i just got my photon yesterday.. )
salim said:
thanke u for helping ,
i just run the cmd command moto-fastboot and it has show me a list of options and commands... thats what it should happens ?
and when i reboot in fastboot it havent shown me that it unlocked... ( i just got my photon yesterday.. )
Click to expand...
Click to collapse
Hmm...when you flash the unlocker, it will fail. This has exactly happened to me. I then proceeded to pull the battery. When I power on the phone again, it should say "Unlocked" at the top above the motorola screen. When you put into fastboot mode, press volume up and start the moto-fastboot commands:
- Type moto-fastboot oem unlock
- Look for the UNIQUE ID number and copy it, use copy or your fat fingers might mistype it.
- Type moto-fastboot oem unlock YOUR_UNIQUE_ID_THAT_YOU_JUST_COPIED
(from the original thread)
It should say "Your phone is already unlocked" or something like that....
- type moto-fastboot reboot or fastboot reboot depending
You should be all set...I'm not sure why it wouldn't say "Unlocked" when powering on the phone again...Try again...just make sure to fully charge your phone, plug it into the back of the computer, and wait for the unlocker to fail. It shouldn't take that long...keep trying!
thanke u very much ! you realy helped me =]
salim said:
thanke u very much ! you realy helped me =]
Click to expand...
Click to collapse
No problem..just hit that "Thanks" button..I'd appreciate it!
Related
Hey Guys,
I tried flashing my rom to CM7 and in the process the phone rebooted and got the error message
SVF:105:1:2
failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop countdown
Available modes are:
1. RSD
2. Fastboot
3. NVFlash
4. BP HW Bypass RSD
5. BP HW Bypass QC Dload
6. BP Diag & boot AP
7. BP HW bypass BP only
8. BP SW bypass RSD
9. Andriod Recovery
10 .Boot andriod (No BP)
11. Device UID
12. console=ttyS0,115200n8
13. Early USB Enumeration
14..BP tools
I get the error message in the rsd lite as error switching to BP and something.
Kindly help i am really confused.
Soft brick .
Download moto-fastboot, and unzip to C:\moto-fastboot
DL here:http://www.android-advice.com/file-d...rix_Root_Files
Download system image for 2.3.4 and unzip to moto-fastboot folder
DL here http://www.android-advice.com/file-d...bread_4591_ROM
Download atrix oem unlock and unzip to moto-fastboot folder
DL here:http://gititbit.ch/pub/unlock.zip
open cmd and navigate to C:\moto-fastboot\
Force fastboot on phone by holding down PWR and VOL UP while inserting battery.
Type these commands:
moto-fastboot oem unlock (it will show atrix ID re-enter with ID at end of line)
when finished, then enter these commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot -w
moto-fastboot reboot
When it reboots, you will be back to stock, fully restored!!
I then used Pete's Motorola Tools to root my atrix.
Info and DL here http://www.psouza4.com/Bionic/
yes it did work on my atrix make sure usb debugging is on and unknown sources checked.
I then installed CWM to my Atrix
DL here http://forum.xda-developers.com/show....php?t=1475444
unzip to moto-fastboot, put atrix in fastboot mode and open cmd, navigate to moto-fastboot folder and type this:
moto-fastboot flash recovery recovery.img
Reboot and you are DONE!!!! All thats left is to find a ROM and you are good to go
No need to do all that.
Since you want to get CM7, Unlock the phone.
Ignore the instructions to flash system.img, that will bring you back to stock.
Enter fastboot, flash a recovery. (Above post last instruction)
Enter recovery mode, than flash CM7 from there.
(I assume you are familiar with what I am talking about, and don't require step by step instructions)
Bricked
Thank u for ur replies i havent tried it yet but i wish it wud work i was using the latest update from AT&T i think since i tried to boot for the older version this happened i am not sure though.
There has been posts about trying to unlock after applying AT&T latest update. You should read up on those, I remember it could brick your phone, be careful!
Thank You
Dear All,
Thank u a hundred thousand times for helping me get rid of the problem i owe u guys a lot finally got to work.
Thank u once again i dont have words to describe my joy.At ant time u want help in India count me in.
this happened to me to, all i did was go to fastboot and unlock the bootloader and it let me boot again after recovering to a rom i had on my SD. i did try and install a custom recovery when it bricked.
HI ranjit
Hi ranjith
need your help
can u drop in ur cell number
or call on 9860521352
thanks in advance
kumar brijwani
ranjithkumar1201 said:
dear all,
thank u a hundred thousand times for helping me get rid of the problem i owe u guys a lot finally got to work.
Thank u once again i dont have words to describe my joy.at ant time u want help in india count me in.
Click to expand...
Click to collapse
kumarbrijwani said:
Hi ranjith
need your help
can u drop in ur cell number
or call on 9860521352
thanks in advance
kumar brijwani
Click to expand...
Click to collapse
9036523279
feel free to sms me
i try to help you in anything i know
it would be better if you could message in Whatsapp
Sent from my MB860 using xda premium
DL here http://forum.xda-developers.com/show....php?t=1475444
error page not found
you can solve this problem....
tank's
hoaca388 said:
Soft brick .
Download moto-fastboot, and unzip to C:\moto-fastboot
DL here:http://www.android-advice.com/file-d...rix_Root_Files
Download system image for 2.3.4 and unzip to moto-fastboot folder
DL here http://www.android-advice.com/file-d...bread_4591_ROM
Download atrix oem unlock and unzip to moto-fastboot folder
DL here:http://gititbit.ch/pub/unlock.zip
open cmd and navigate to C:\moto-fastboot\
Force fastboot on phone by holding down PWR and VOL UP while inserting battery.
Type these commands:
moto-fastboot oem unlock (it will show atrix ID re-enter with ID at end of line)
when finished, then enter these commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot -w
moto-fastboot reboot
When it reboots, you will be back to stock, fully restored!!
I then used Pete's Motorola Tools to root my atrix.
Info and DL here http://www.psouza4.com/Bionic/
yes it did work on my atrix make sure usb debugging is on and unknown sources checked.
I then installed CWM to my Atrix
DL here http://forum.xda-developers.com/show....php?t=1475444
unzip to moto-fastboot, put atrix in fastboot mode and open cmd, navigate to moto-fastboot folder and type this:
moto-fastboot flash recovery recovery.img
Reboot and you are DONE!!!! All thats left is to find a ROM and you are good to go
Click to expand...
Click to collapse
Hello
my tablet hang on huawei logo and not working anythings !!!
bootloader locked and i dont know imei serial number and biuldnumber to unlock bootloader
get device in fastboot mode and get detail to unlock bootloader and give me this message :
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
getvar:all FAILED (remote: Command not allowed)
finished. total time: 0.004s
How Can i Flash Android or factory reset or unlock bootloader
Sorry English not my first language .
Well, you need to do the following:
1- Download the firmware from here
then extract the file to get the "dload" folder.
2-Get sdcard and use card reader so your pc be able to read it as a flash stick.
3- copy "dload" folder to sdcard, then insert it into your device.
4- Get into the recovery mode,
by completely turning off your device, then press (Vlo. UP + power) buttons, wait the device vibs, release the power button and keep "vol. up" one, till you get into the recovery mode.
and from the list, chose "upgrade from sdcard" option (the last one), and your device will start re-installing the whole system again.
mann1 said:
Well, you need to do the following:
1- Download the firmware from here
then extract the file to get the "dload" folder.
2-Get sdcard and use card reader so your pc be able to read it as a flash stick.
3- copy "dload" folder to sdcard, then insert it into your device.
4- Get into the recovery mode,
by completely turning off your device, then press (Vlo. UP + power) buttons, wait the device vibs, release the power button and keep "vol. up" one, till you get into the recovery mode.
and from the list, chose "upgrade from sdcard" option (the last one), and your device will start re-installing the whole system again.
Click to expand...
Click to collapse
Hello My Friend
Thanks For Reply
Device Hang On Huawei Logo After Turn ON And Not Get in Recovery Mode !!!!
I,m Record Video Tablet Working And Attachment On This Post Please See This And Give me help to fix this please
Not Any way unlock bootloader without SN And Imei ?
Video Link : Download
mo4sa said:
Hello My Friend
Thanks For Reply
Device Hang On Huawei Logo After Turn ON And Not Get in Recovery Mode !!!!
I,m Record Video Tablet Working And Attachment On This Post Please See This And Give me help to fix this please
Not Any way unlock bootloader without SN And Imei ?
Video Link : Download
Click to expand...
Click to collapse
What did you do to get your device like that?
Generally you will find the IMEI of your device on label sticker comes with the device box, usually between the manual's pages.
Try this method to unlock the bootloader, it MIGHT work, i'm not sure, but give it a try
Get into fastboot mode (Vol. down + power) then
type this code:
Code:
fastboot oem unlock 1282022012246616
mann1 said:
What did you do to get your device like that?
Generally you will find the IMEI of your device on label sticker comes with the device box, usually between the manual's pages.
Try this method to unlock the bootloader, it MIGHT work, i'm not sure, but give it a try
Get into fastboot mode (Vol. down + power) then
type this code:
Code:
fastboot oem unlock 1282022012246616
Click to expand...
Click to collapse
Hello My Friend
Thanks for my post reply
I Try this code butt now working and give me this :
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock 1282022012246616
...
FAILED (remote: password wrong)
finished. total time: 0.010s
i don,t know what i,m to do !
If don,t unlock bootloader no any way to use my tablet ?
mo4sa said:
Hello My Friend
Thanks for my post reply
I Try this code butt now working and give me this :
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock 1282022012246616
...
FAILED (remote: password wrong)
finished. total time: 0.010s
i don,t know what i,m to do !
If don,t unlock bootloader no any way to use my tablet ?
Click to expand...
Click to collapse
Sorry, without IMEI or bootlaoder i can't deal with such situation, wait for answers from others.
Did you flash custom recovery before?
mann1 said:
Sorry, without IMEI or bootlaoder i can't deal with such situation, wait for answers from others.
Did you flash custom recovery before?
Click to expand...
Click to collapse
No i,m not Flash Custom Recovery !
No Any idea to fix this ????????????
mo4sa said:
No i,m not Flash Custom Recovery !
No Any idea to fix this ????????????
Click to expand...
Click to collapse
Did you finally get help in regards to your issue, as I have the same problem
mann1 said:
What did you do to get your device like that?
Generally you will find the IMEI of your device on label sticker comes with the device box, usually between the manual's pages.
Try this method to unlock the bootloader, it MIGHT work, i'm not sure, but give it a try
Get into fastboot mode (Vol. down + power) then
type this code:
Code:
fastboot oem unlock 1282022012246616
Click to expand...
Click to collapse
Not sure if you still have this thread in notification, but I'm having the exact same issue as the OP.
Model - S10-231u
IMEI: 863693023231929
S/N: K8D6R14B03000379
Hope you can calculate a code to unlock it, I'm ready to test or flash anything if you need me to do so.
I have the same problem and can not find a solution to it today so I hope you help
I unfortunately can not find the imei number
I have an SN number and a mac number
Either the device number S10-231w
I hope you can solve my friends
Hello,
I accidentally flashed a Stratos firmware on my Amazfit Pace 1. Blame on me !
But since I cannot unbrick it.
I can boot in fastboot bootloader thank to thread https://forum.xda-developers.com/smartwatch/other-smartwatches/amazfit-boot-fastboot-directly-t3546829,
but I cannot boot into recovery with command :
> fastboot boot Amazfit-mod-recovery.img
downloading 'boot.img'...
FAILED (remote: ED: The command is not allowed.)
finished. total time: 0.063s
Can anybody provide help ?
Thanks in advance
The error message is because bootloader is locked. If you don't have root access nor unlocked bootloader, I guess the only option is trying to use Ingenic's "cloner" tool to flash the firmware directly (use option 2 instead of 1 to enter "force erase"). You should flash an old firmware with unlocked bootloader first, check if serial number is OK (if now, fix it using the info in the thread about fixing a null SN) then update.
PS: Do NOT enter "force erase" without having everything set up correctly because the watch won't leave this mode until you flash it.
lfom said:
The error message is because bootloader is locked. If you don't have root access nor unlocked bootloader, I guess the only option is trying to use Ingenic's "cloner" tool to flash the firmware directly (use option 2 instead of 1 to enter "force erase"). You should flash an old firmware with unlocked bootloader first, check if serial number is OK (if now, fix it using the info in the thread about fixing a null SN) then update.
PS: Do NOT enter "force erase" without having everything set up correctly because the watch won't leave this mode until you flash it.
Click to expand...
Click to collapse
Thanks @IFOm
the problem I have is that the swatch boots, then reboot, and finally fall into error screen. So I have little time to act with adb.
iznogoud! said:
Thanks @IFOm
the problem I have is that the swatch boots, then reboot, and finally fall into error screen. So I have little time to act with adb.
Click to expand...
Click to collapse
On Windows use:
Code:
adb wait-for-device & adb shell reboot bootloader
and on Linux/macOS:
Code:
adb wait-for-device; adb shell reboot bootloader
and watch will enter fastboot mode as soon as adb is detected (you can type the command and adb will wait for the device, as the words say, then issue the second one).
adb shell does not work, I get following message :
- exec '/system/bin/sh' failed: Exec format error (8) -
using port=5555
enter fastboot using this method https://www.youtube.com/watch?v=ZlXoeq30vM0 and check the correctness of the serial number and the bootloader lock
iznogoud! said:
adb shell does not work, I get following message :
- exec '/system/bin/sh' failed: Exec format error (8) -
using port=5555
Click to expand...
Click to collapse
Your system is messed up... You can go to fastboot mode manually, then try to flash the correct kernel (boot.img) and recovery from fastboot... this my fix your serial number and show locked status as unlocked again. If everything fails, your last resource is the cloner tool I mentioned a few comments before.
Hi,
I've now spent quite a few frustrating hours trying to root my Alcatel 1c (model 5003D, running Android 8.1 Go) and nothing seems to work. A short overview of some of the rabbit holes I've gone down:
Root tools
Started with the obvious: root tools. In short, none that I ran work. There's a couple I haven't tried because the instructions were mostly in Russian and some googling turned up quite a few mentions of them containing malware, but other than that I've pretty much tried all the major ones.
Flashing images via fastboot
Naturally, the next place I turned was the awesome resource that is this forum. This thread gave me plenty of hope, but I was soon flummoxed by my device's fastboot mode for which a bunch of the normal features are either broken or are simply not implemented. Some examples of things that should work (and indeed work on other Alcatel phones, notably, it seems, ones that are not based on Spreadtrum) but didn't:
Code:
~/D/platform-tools > ./fastboot oem unlock
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot oem unlock-go
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot oem unlock-go --wipe
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
Code:
~/D/platform-tools > ./fastboot flashing unlock
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
(note the spelling error in the error message...)
Code:
~/D/platform-tools > ./fastboot flash recovery ../recovery.img
Sending 'recovery' (28266 KB) OKAY [ 1.582s]
Writing 'recovery' FAILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')
fastboot: error: Command failed
That last one was particularly intriguing, as it suggests there is a Flashing Lock Flag that can be unlocked. I tried all of the fastboot commands that seemed relevant but couldn't find any way of setting that flag or even figuring out if it actually exists. I even rand the boot.img through strings to see if I could find something interesting, but didn't turn up anything.
Just to be clear, before doing all this I set the phone to Developer Mode and checked the "OEM unlocking" feature.
Flashing tools
I tried various tools with which it's possible to flash phones. A lot of them use fastboot under the covers which doesn't work (see above). Some of them don't but didn't work on my phone all the same, for various reasons:
SPD flash tool - After yet more Googling I stumbled upon the SPD flash tool,built specifically to flash Spreadtrum-based devices. I downloaded the latest version, installed all of the necessary USB drivers and tried to flash the phone with the stock ROM. No dice. The tool fails to connect to the device via the USB2Serial thing that it uses to communicate. No idea what's going on or why it won't work, and haven't yet mustered the courage to dive into the source code. Of course, if I do get it to work, then I have to figure out how to actually root the device using this tool. I'm guessing it will involve unpacking the ROM (a PAC file), modifying the recovery.img to a TWRP (or similar), repacking it and flashing the result. I've only managed the unpacking so far, no clue as to the other 2 steps. BTW, the SPD flash tool site als has a "factory" and a "research" tool, besides the "upgrade" tool that I tried. Unless I'm missing something, all three seem to be exactly the same (save for the color scheme).
Alcatel Mobile Upgrade S - Installs just fine and then allows you to choose your phone out of a dropdown... that doesn't include my model.
Sugar MTK/QCT - Installed it and the necessary drivers but it can't find my phone, no matter what I try. Also, I keep reading that it needs login credentials (wut?)
Conclusion: argh!
So, nothing so far. Since it's a Spreadtrum phone it has an engineering mode that can be explored with an APK I found in this thread. Nothing in the settings it reveals appears to be of any help though. I also contacted the makers of the AIO Alcatel toolkit to see if they had any ideas, but after I explained the situation one of them concluded "Hmmm. New one on me". Needless to say I also tried searching this forum for more tips, but googling 'site:forum.xda-developers.com "5003D"' returns no hits.
For now, I'm forced to conclude that there is a lot of really awesome tooling out there created by some very talented people, but none of it works on my phone. As of yet the 5003D appears pretty unrootable. If anyone has any tips to help me along or point me in the right direction, I would be very appreciative.
bump
bump
Then type the command to show the device
fastboot -i 0x1bbb devices
Execute the next command which will show device info including bootloader status (e.g. locked).
fastboot -i 0x1bbb oem device-info
This command is to unlock the bootloader on Alcatel device
fastboot -i 0x1bbb oem unlock
Repeat Step and you should see “Device unlocked: true”
To reboot normally type:
fastboot -i 0x1bbb reboot
Done
This command is to unlock the bootloader on Alcatel device
fastboot -i 0x1bbb oem unlock
Click to expand...
Click to collapse
I've tried that a bunch of times in an bunch of different ways, and unfortunately that doesn't work for this particular phone.
lotus118 said:
I've tried that a bunch of times in an bunch of different ways, and unfortunately that doesn't work for this particular phone.
Click to expand...
Click to collapse
Rooting your phone's Android does NOT require you fiddle around with its boot-loader. Forget trying to make use of Fastboot.
So how would I go about this without using fastboot?
lotus118 said:
So how would I go about this without using fastboot?
Click to expand...
Click to collapse
1. Open Windows command prompt and input the following comand
Code:
adb devices
2. Start the ADB sideload in your phone's recovery
3. Then input the following command in the Windows command prompt
Code:
adb sideload <filename.Zip>
where <filename.zip> must of course be the real full filepathname of ZIP to get flashed
So I got a Lil c100 a couple days ago. It has a screen lock and the recovery mode don't work. Everyone says get it into fastbook amd use that to get to recovery. But the problem is after I get into fastboot the device isn't found. I've installed every USB driver known to man about fastboot or Nokia in general. And yet it still not popping up. Can sb help me?
swiftd3v said:
So I got a Lil c100 a couple days ago. It has a screen lock and the recovery mode don't work. Everyone says get it into fastbook amd use that to get to recovery. But the problem is after I get into fastboot the device isn't found. I've installed every USB driver known to man about fastboot or Nokia in general. And yet it still not popping up. Can sb help me?
Click to expand...
Click to collapse
anything yet?
swiftd3v said:
So I got a Lil c100 a couple days ago. It has a screen lock and the recovery mode don't work. Everyone says get it into fastbook amd use that to get to recovery. But the problem is after I get into fastboot the device isn't found. I've installed every USB driver known to man about fastboot or Nokia in general. And yet it still not popping up. Can sb help me?
Click to expand...
Click to collapse
What do you mean by "the device isn't found"?
wenyendev said:
What do you mean by "the device isn't found"?
Click to expand...
Click to collapse
The error I’m getting is “fastboot: usage: unknown device target recovery”
I am experiencing the EXACT same thing. No matter what box program Im using , nothing works! crazy. Please help. Id be happy with a factory reset. Atleast then I could get past the FRP.
Wow, I have not encountered that error yet.
I could only guess that it might be a problem of recovery.
How did you install your current recovery if not from fastboot?
diamant3 said:
The error I’m getting is “fastboot: usage: unknown device target recovery”
Click to expand...
Click to collapse
you're using fastboot reboot recovery?
Hey any update on this? I can say I've come across the same issue where their seems to either be no recovery or a corrupt one.
One thing I want to point out is (at least with the TracFone) that when I put the device in fastboot, and have wondershare tune go running, it displays the device as a Sony Xperia. The program still isn't able to connect to the device for me to attempt a reboot into recovery. It also reads the device as two other devices.
I'm hoping someone has encountered these findings and may also have a dump of the stock rom.if so I may be able to begin rooting for at least fix the recovery issue.
TaigaDaReck said:
Hey any update on this? I can say I've come across the same issue where their seems to either be no recovery or a corrupt one.
One thing I want to point out is (at least with the TracFone) that when I put the device in fastboot, and have wondershare tune go running, it displays the device as a Sony Xperia. The program still isn't able to connect to the device for me to attempt a reboot into recovery. It also reads the device as two other devices.
I'm hoping someone has encountered these findings and may also have a dump of the stock rom.if so I may be able to begin rooting for at least fix the recovery issue.
Click to expand...
Click to collapse
Also I'm going to use my Linux system to see if I get any results. Let me know if you've tried it as well.
fastboot oem unlock/fastboot flashing unlock has been blocked in the boot loader, only hope for root is another brom exploit like mtkclient or a temp root privilege escalation exploit
luridphantom said:
fastboot oem unlock/fastboot flashing unlock has been blocked in the boot loader, only hope for root is another brom exploit like mtkclient or a temp root privilege escalation exploit
Click to expand...
Click to collapse
Were you able to get fastboot to recognize the device?
Which OS are you testing on if you are?
TaigaDaReck said:
Were you able to get fastboot to recognize the device?
Which OS are you testing on if you are?
Click to expand...
Click to collapse
you need to use a special mtk boot mode script you can download here #101
Code:
computer:~ user$ python3 ~/Downloads/mtk-bootseq.py FASTBOOT /dev/tty.usbmodem14100
b'READYTOO'
Boot sequence sent
computer:~ user$ ~/Downloads/platform-tools/fastboot oem unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
computer:~ user$ ~/Downloads/platform-tools/fastboot flashing unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
computer:~ user$ ~/Downloads/platform-tools/fastboot oem unlock-go
FAILED (remote: 'unknown command')
fastboot: error: Command failed
testing on android 12, jan5 2022 update build 02US_1_030
luridphantom said:
you need to use a special mtk boot mode script you can download here #101
Code:
computer:~ user$ python3 ~/Downloads/mtk-bootseq.py FASTBOOT /dev/tty.usbmodem14100
b'READYTOO'
Boot sequence sent
computer:~ user$ ~/Downloads/platform-tools/fastboot oem unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
computer:~ user$ ~/Downloads/platform-tools/fastboot flashing unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
computer:~ user$ ~/Downloads/platform-tools/fastboot oem unlock-go
FAILED (remote: 'unknown command')
fastboot: error: Command failed
testing on android 12, jan5 2022 update build 02US_1_030
Click to expand...
Click to collapse
Hey thanks for the response.
So far I've been able to get the device to read in fastboot but I'm still unable to unlock the bootloader since as your saying it's definitely..."gimped" haha. I'll checkout the script and do some tests to see what I get.
TaigaDaReck said:
Hey thanks for the response.
So far I've been able to get the device to read in fastboot but I'm still unable to unlock the bootloader since as your saying it's definitely..."gimped" haha. I'll checkout the script and do some tests to see what I get.
Click to expand...
Click to collapse
if you're curious you can always reach out to this guy, he's able to get prototype boot loaders and stuff: https://twitter.com/Hikari_Calyx
might even know how to get test points to force it into brom for mtkclient