[q] ordin flash with different pda, phone & csc - Galaxy S II Q&A, Help & Troubleshooting

Dear All,
Just want to ask a noob question regarding Ordin Flashing.
Can I flash different type's of tar into the S2?
etc : PDA: XXKI3
Phone: DXKI1
CSC: OLCKH1
Phone and CSC is according to the original Version.
Thanks

Odin flash different PDA Phone or CSC yes .
Example .
PDA KH7
Phone = modem/baseband KH1
CSC = country network settings KD1
jje

Thanks for the info..
By the way, can I flash the PDA, Phone & CSC all in one time? Means that I select the tick the PDA, Phone & CSC, then Start.
Or flashing one by one. 1st PDA, rebbot. 2nd Phone, reboot again. Last CSC, Done..

All or individually can be flashed .
jje

Related

[Q] noob mode on : when I flash a kernel, what am I modifying exactly ?

I read the Kernel is the heart of a linux system.
But, when i'am flashing a stock Kernel (for exemple XWKE8 on XWKE4 stock firmware) what will be the modifications ?
PDA part ?
Not PHONE or CSC part ok I am not so stupid.
Is odin PDA : android OS + Kernel or only kernel or other ?
Thanks to show me the light
I *think* the kernel is the same as PDA...
...i think...
Kernel is the core that communicates with hardware and the OS .
PDA is phone firmware kernel .including Phone is modem CCS is country specific file
PDA has multiple uses kernel full firmware as a single file including modem and csc
Each file is flashed via the relevant instructions as to Odin location .
jje

How to change CSC code from KOR to XEU when XEU is not in the list ?

Just got my S2 yesterday and KIES said my device is not supported. I found out that because my CSC code is KOR, I tried to change it to XEU by enter CSC code menu but XEU is not in the list. So please tell me how to change mine to XEU and will it be supported by KIES after the CSC code change into XEU ?
Thanks in advance.
If your worried about future updates, flash a complete XEU official firmware package from here to allow KIES updating;
[ROM+Guide]Official i9100 Firmwares KG, KH, KI, KJ, KK1/2/5, KL1/2/3, LA2 Download
If your not too worried (as you can always update and flash new firmware packages (or part of) with Odin) use Odin instead of KIES.
You could also install a multi CSC and change CSC to XEU (phone dialer *#272*<your IMEI>#) or flash an individual XEU CSC package from the thread (end of post #3). Just use Odin for installing any future updates. Edit: Note changing CSC will most likely wipe your phone, so backup anything important first!
To keep an eye out for updates, check back regularly on Intratech's thread or use a program here to check and download;
[WINDOWS APP]Check Fus Downloader - Download and decrypt latest firmware [Kies2.0] or here

[Q] Stock ROM Flashing - CSC missing

I got my phone with I9300XXALE8_I9300OXAALE8. Downloaded the latest version I9300XXALF2_I9300OXAALF2 from sammobile. It is coming with a single file PDA and flashed via odin without pit. But after flashing CSC is unknown. So tried to change the CSC *#272#IMEI# but the list is empty. So decided to flash back to I9300XXALE8_I9300OXAALE8 and I got the CSC back. Again tried to flash the latest one and the result is same CSC unknown. So back to I9300XXALE8_I9300OXAALE8, but this time I didnt get the CSC on this version, same like new version unknown.
Finally flashed I9300XXALF2_I9300OXAALF2 and I got CSC on this time. I dont have any idea why this misbehavior is happening while flashing. Any suggestions?
Quick look..
1. Flash I9300XXALF2_I9300OXAALF2 - Result-unknown CSC
2. Flash I9300XXALE8_I9300OXAALE8 - Result-CSC is there
3. Flash I9300XXALF2_I9300OXAALF2 - Result-unknown CSC
4. Flash I9300XXALE8_I9300OXAALE8 - Result-unknown CSC
5. Flash I9300XXALF2_I9300OXAALF2 - Result-CSC is there
Regards...
Any luck resolving that issue?

[Q] CSC unknown

Hello,
had stock XEO ROM. Decided to switch to BTU. Took latest release (XXEMB1) from Sammobile and flashed it via Odin. Now even *#1234# shows its XXEMB1, my CSC is actually unknown and Kies does not support it (shows its KOR). How do i fix that and make my CSC be BTU? Thank You.
Gytis
If you flashed via Odin then it's normal and dont expect kies support.If you back to stock firmware and wait via OTA or Kies then you can see your csc and kies support.
deniz2051 said:
If you flashed via Odin then it's normal and dont expect kies support.If you back to stock firmware and wait via OTA or Kies then you can see your csc and kies support.
Click to expand...
Click to collapse
Thats strange. So the only way is to untar FW, extract cashe.img, find BTU in CSC directory, copy its content into main CSC directory to overwrite KOR content. Make img file again, tar it and try to flash?
first of all CSC unknown is not a big issue, you can use the phone normally.
second, for most people (incl. me) reflashing the rom will give you back the CSC (if nothing was changed with the newer firmwares).
to change the CSC, try CSC changer from market or search for a flashable zip here on xda
So, to sum up: extracting CSC and pasting BTU content over default content in CSC dir did not help - flashed only modified CSC.tar.md5 and still, Kies shows KOR and not supported. Decided to flash back to initial stock SEB FW. Did that and still no success - my CSC is KOR in Kies. Seems like once you flashed via Odin, you are forever lost...

[Q] Verifing modem, pda, and csc on S5830M after flashing

hi guys, i got a SGA S5830M with this stock firmware S5830MWHLE3_S5830MCOLLE1_COL.zip, and I flash this one with odin S5830MWHLK2_S5830MCOLLK3_COL (downloaded from sammobile), but when I verify with code *#1234# appears data of this one S5830MWHLE3_S5830MCOLLE1...even in "about phone" on phone settings...apparently flashing finish ok but why keep showing old firmware data????

Categories

Resources