[Q] Verifing modem, pda, and csc on S5830M after flashing - Galaxy Ace S5830i Q&A, Help & Troubleshooting

hi guys, i got a SGA S5830M with this stock firmware S5830MWHLE3_S5830MCOLLE1_COL.zip, and I flash this one with odin S5830MWHLK2_S5830MCOLLK3_COL (downloaded from sammobile), but when I verify with code *#1234# appears data of this one S5830MWHLE3_S5830MCOLLE1...even in "about phone" on phone settings...apparently flashing finish ok but why keep showing old firmware data????

Related

[Q] All CSCs disappeared after flashing I9100XWKE7 XEUKD1 XXKE4 [Solved]

After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
http://forum.xda-developers.com/showthread.php?p=13730471
xtzz said:
After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
Click to expand...
Click to collapse
If you took the time to research you'd have seem that it's not a multi-CSC package but only contains XEU csc. This is not a problem, it's working correctly. If you want another CSC that flash a firmware package containing that CSC.
Thanks guys.
@Intreatech, no, XEU is okay for me, it's the one I actually want.

[q] ordin flash with different pda, phone & csc

Dear All,
Just want to ask a noob question regarding Ordin Flashing.
Can I flash different type's of tar into the S2?
etc : PDA: XXKI3
Phone: DXKI1
CSC: OLCKH1
Phone and CSC is according to the original Version.
Thanks
Odin flash different PDA Phone or CSC yes .
Example .
PDA KH7
Phone = modem/baseband KH1
CSC = country network settings KD1
jje
Thanks for the info..
By the way, can I flash the PDA, Phone & CSC all in one time? Means that I select the tick the PDA, Phone & CSC, then Start.
Or flashing one by one. 1st PDA, rebbot. 2nd Phone, reboot again. Last CSC, Done..
All or individually can be flashed .
jje

[Q] firmware

can any one helo me with this?
i have a samsung galaxy s2 from bell it was flashed with xxki3 package that included a bootloader pda phone and csc files. i want to return my phone to the stock bell files ugkg2 but the firmware i downloaded does not have a bootloader just the pda phone and csc files.
am i right to assume that the bootloader that came with the xxki3 firmware even after i flash the ugkg2 firmware remains on my phone thats why whin i flash to it the phone wont boot?
i am a noob but my understand is there is check points in the bootloader and the firmware of xxki3 that must match up and if they dont meaning u change the firmware and not the bootloader and the phone wont load? is this correct?
also is the bootloader from xxki3 secure? meaning it cant be changed?
how do i find the ugkg2 bootloader to flash with the ugkg2 firmware?
or how do i unsecured the xxki3 bootloader so i can flash back to the ugkg2
sorry for the noob questions but i have been searching for about a week now to be able to get off this xxki3 firmware so i can load a coustom rom
PLEASE HELP!!

[Q] Stock ROM Flashing - CSC missing

I got my phone with I9300XXALE8_I9300OXAALE8. Downloaded the latest version I9300XXALF2_I9300OXAALF2 from sammobile. It is coming with a single file PDA and flashed via odin without pit. But after flashing CSC is unknown. So tried to change the CSC *#272#IMEI# but the list is empty. So decided to flash back to I9300XXALE8_I9300OXAALE8 and I got the CSC back. Again tried to flash the latest one and the result is same CSC unknown. So back to I9300XXALE8_I9300OXAALE8, but this time I didnt get the CSC on this version, same like new version unknown.
Finally flashed I9300XXALF2_I9300OXAALF2 and I got CSC on this time. I dont have any idea why this misbehavior is happening while flashing. Any suggestions?
Quick look..
1. Flash I9300XXALF2_I9300OXAALF2 - Result-unknown CSC
2. Flash I9300XXALE8_I9300OXAALE8 - Result-CSC is there
3. Flash I9300XXALF2_I9300OXAALF2 - Result-unknown CSC
4. Flash I9300XXALE8_I9300OXAALE8 - Result-unknown CSC
5. Flash I9300XXALF2_I9300OXAALF2 - Result-CSC is there
Regards...
Any luck resolving that issue?

galaxy s2 stuck in odin

hello
i have a galaxy s2 phone with 2.3 firmware
i wanted to upgrade it to ics of jeallybean, so i've downloaded a flashable zip rom and tried to flash from stock recovery, but it didn't flash, so i tried to falsh a new recovery, i tried: rom manager (after rooting the device but it ddoesnt work.
so i tried to flash a frimware via odin
i used Odin 1.85
and this firmware: GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5
but the oding stucks in:
boot.ini
NAND write start
and then it stopes
i've also tried this firmwre:
I9100XWLSW_I9100XXMS3_I9100VGFLS2_HOME.tar.md5
and i have the same problem
my phone now is stucked in download mode, and i cannot enter recovery mode, not connect with samsung Kies.
please help me.
ARDV said:
hello
i have a galaxy s2 phone with 2.3 firmware
i wanted to upgrade it to ics of jeallybean, so i've downloaded a flashable zip rom and tried to flash from stock recovery, but it didn't flash, so i tried to falsh a new recovery, i tried: rom manager (after rooting the device but it ddoesnt work.
so i tried to flash a frimware via odin
i used Odin 1.85
and this firmware: GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5
but the oding stucks in:
boot.ini
NAND write start
and then it stopes
i've also tried this firmwre:
I9100XWLSW_I9100XXMS3_I9100VGFLS2_HOME.tar.md5
and i have the same problem
my phone now is stucked in download mode, and i cannot enter recovery mode, not connect with samsung Kies.
please help me.
Click to expand...
Click to collapse
Follow the steps I've mentioned in this forum yesterday.
http://forum.xda-developers.com/galaxy-s2/help/fix-samsung-s2-booting-root-reset-t3087729
This should fix the issue, and then you can restore back and update your phone or flash custom ROMs.
Regards
i'm trying to download from rapidgator from 2 days but i can't, it always breaks!
and it can't be resumed
http://samsung-updates.com/details/23417/Galaxy_S_2/GT-I9100/VOD/I9100XWMS2.html
I have a stucked i9100 too.
If i choose a pit file, and select Re-partition, Odin stucked in SetPartition.
if i not checked, the re-partition, Odin stucked in data.img (3 files) or sbl.bin (1 file)
the same problem
always stuck in: NAND write start!!
help please
note:
when i falsh a recovery (like:CWM-KitKatCompatible-i9100.tar) it flashed well, but i can't access the recovery!
phone ssn: i9100GSMH
is it necessary to flash any pit file?
pit file should not be necessary, its main purpose is to re-partitionate the device. If you are already happy with your setup you don't need to flash it to update firmware.
Remember to choose the firmware for the right region for you, the link you posted is for VOD Region (United Kingdom Vodafone).
i think the problem is in the region, i've tried many regions but no one worked.
how to know my phone original firmware region?
Edit: phone flashed sccuessfully.
the problem was that the version printed in the phone is I9100, and the real phone's firmware is I9108.

Categories

Resources