I have GlsmtRom v1.5 but is based in kpn
the 2.1 os based in kpo, i need to put the kpo and then install the GlsmtRom v2.1 or can i update to 2.1 directly??
And what is the SOD, i read some times but i dont understand what is
gaio03 said:
I have GlsmtRom v1.5 but is based in kpn
the 2.1 os based in kpo, i need to put the kpo and then install the GlsmtRom v2.1 or can i update to 2.1 directly??
And what is the SOD, i read some times but i dont understand what is
Click to expand...
Click to collapse
Yes you can directly update to 2.1 without problems as I have done it. SOD stands for sleep of death which is when some ROMs turn off if you have wifi or bluetooth on. It is kernel related.
Sent from my GT-S5830 using XDA App
do i have to wipe my data or update directly? because last time i put i had to wipe my data
Related
Hi guys, I have a 2.1 x10i with Eminence v1.2 rom with Jit v.2 and now my phone is very quicky( compare to 2.1 SE rom)!! Do you think that Free x10 beta 2 froyo is much faster and performance??How much??Do you think i should install 2.2 or use 2.1 with jit??
Thanks a lot
you should definitely put the 2.2 froyo beta 2.
and be patient, because theme will come soon
did you have a problem of the constant rebooting? i've tried everything in this thread....
coming from Eminence+v1.2 rom
kevwo said:
did you have a problem of the constant rebooting? i've tried everything in this thread....
coming from Eminence+v1.2 rom
Click to expand...
Click to collapse
i have installed 2.2 + google apps and none reboots.
try flashing from stock rom and having sim card inserted
I'm currently running FreeX10 B3H1, I see that B4 is out and all it apears to do is add support for the new Baseband... is there any notice improvements with the updated baseband?
I'm also not entirely sure what the baseband does
The baseband is the radio of the phone, so basically it controls your call quality, signal, mobile network, etc..
As fire why to upgrade, I can honestly say I haven't noticed any real benefits since I updated. However, as time progresses newer roms are going to be based on this version so if you want to keep flashing custom roms eventually you will have to upgrade anyway..
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
hey, for d "unknown baseband" problem u have to wait for d auto reboot after d 1st boot..only then d baseband and network will appear..
and for d boot loop problem-u will need to update to d .435 firmware (.52 baseband and .29 kernels)..or if u want to keep d old firmware install beta3..(beta 4 is only for .435 firmware)
happy flashing bro.
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
srikanth.naidu said:
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
Click to expand...
Click to collapse
I've installed this : http://forum.xda-developers.com/showthread.php?t=936462
Got .435 and baseband 2.1.54
Installed Free X10 without any problem.
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
ratmkicksass said:
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
Click to expand...
Click to collapse
no you don't...
flashing just the kernel and the baseband through flashtool has the EXACT same effect...
Use it when your baseband is 54+ and want to try out J's cm7 rom or rdannar's GB Miui rom or Arc rom.
Tested working on J016 and J017 and rdannar's GB Miui - for stock kernel only.
Do it at your own risk and it's not supported by J
Patch it with cm7bb54.zip
Restore back the original with cm7bb52.zip (if you decide to change base band)
This patch won't solve any problem that may come with the rom (such as wlod)
Note: This patch won't work on Trip's GB Miui
pls hit Thanks button if it helps you
I want to make sure I got this all correct:
1. If on bb.54+, flash cm7bb54.zip to patch/use cm7
2. If previously flashed to bb.52, flash cm7bb52.zip to go back to bb.54+
Would I have to flash each zip file every time I want to go back and forth between each rom?
Thanks cobrato!
1.correct
2. only if you decide to flash bb52 again(for any reason) and still want to use cm7 flash cm7bb52.zip
no. if you are flashing a new rom which requires bb54 and you are on bb54 then no need to flash this zip.
Can use this patch for bb.55 ?
I finally gave in and left FreeX10 to test out CM7.
It feels pretty stable but there's some issues I sense still need tweaking and I'll post after I'm done here.
QQ; what improvements have you sensed using .54 over .52, both in general and with CM7?
Personally i don't think there are any improvements. But some people just want a higher number. In fact some of the functions in .54 are broken like auto-time settings.
realunited123 said:
Personally i don't think there are any improvements. But some people just want a higher number. In fact some of the functions in .54 are broken like auto-time settings.
Click to expand...
Click to collapse
Not correct.....
If you are in north america .49/.52 causes many issues, especially when it comes to dropped calls , failed text messages and slow 3g+ speeds.
On .55 the failed text issue is fixed completely, I get much better call signal and faster 3g+.
fiscidtox said:
Not correct.....
If you are in north america .49/.52 causes many issues, especially when it comes to dropped calls , failed text messages and slow 3g+ speeds.
On .55 the failed text issue is fixed completely, I get much better call signal and faster 3g+.
Click to expand...
Click to collapse
Ok. Never have those issues here.
Sent from my X10i
@cobrato
brilliant job!!!!!
a much needed patch for ppl trying out CM7...
but the custom kernels will not work if u use this... all customs kernels currently available are based on baseband 2.0.52
great work ive ben donne it too but havent time to share it wanted to do it today and i see your post
can u make a patch for bb 49 i wna try it on trip Miui which only works on bb49
I support it for me and you miui Rom...
Sent from my Arc_2.3.1-TMR using XDA App
Thank you so much
Sent from my X10i using XDA App
great stuff
Omfg thanks your awesome dude!
Sent from my X10i using XDA Premium App
Worked on cm7.03 with bb 67 and 360 kernal ;-)
Sent from my X10 using XDA Premium App
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
toninawer said:
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
Click to expand...
Click to collapse
Not without the new kernel, the only way it is possible is if the bootloader gets unlocked
Sent from my x10i using xda premium
toninawer said:
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
Click to expand...
Click to collapse
Your usb port, or usb cable?
You can't install the kernel needed for GB without flashtool.
So if your usb port is broken, maybe look on ebay for spare parts to fix it.
If your usb cable is broken, buy a new one.
Good luck
sorry but how do i apply this patch? i'm on BB54 with a broken usb connector
i guess this might be (all steps via xrecovery)
1.- install patch
2.- install 2.3.3 rom (any rom available)
3.- install custom kernel (zKernel might be)
is this correct?
thanks in advance
Hello, i'm italian so sorry for my poor english...!!!
I have an atrix ORANGE UK, already rooted and unlocked with gingerbreak.
On my phone i read:
system version 4.1.31.MB860 Orange.en.gb
Android 2.2.2
Baseband n_01.86.00r (not the latest)
Webtop ver
Oshwt_u1_6.34.0
Buld
OLYEM_U4_1.3.1
1- I want to flash a custom rom, like the INTL Darkside 2.0, but i read that the faux123's kernel is optimized for the latest baseband....is it right?
And what will happen if i flash a not INTL rom (or just after i don't flash the fixed kernel)?
2- If i check for updates an alert inform me that a 40mb OTA update is available for download...have i to install it or will it brick my phone...???
3-So what have i to do before i can flash safely?
That's my 1st android phone after 7 years with windows mobile....and i have flashed several time various WM phones.
i read A LOT of threads on this forum but i'm VERY confused...too much informations mixed from AT&T e INTL......
Thanks a lot!!
Mirko
Don't worry about the baseband. As long as you are bootloader unlocked and you flash a kernel that is international and tegra part identifying.
Darkside does flash the fight kernel by itself so you can go ahead. I believe that the update is safe(not certain though) but is unnecessary if you are going to flash a rom
sent from my Atrix via XDA premium
Thanks a lot!!!
Now i'm going to try to flash the Darkside rom...i will let you know!
msin84 said:
Thanks a lot!!!
Now i'm going to try to flash the Darkside rom...i will let you know!
Click to expand...
Click to collapse
After a lot of troubles now i have the cm7 beta, with some little problem!
Thanks a lot!
t's been awhile since my last upgrade, my X10a is still on 2.1-update1 firmware, baseband 2.1.54, kernel version 2.6.29 with build number 2.1.A.0.435
How to flash to latest 2.3 ?
You can upgrade to gingerbread with with pc companion..
but stock 2.3 from SE is very laggy & slow so install a custom gingerbread rom like Wolfs TW Gingerbread v7
Wolfs TW Gingerbread v7 is a very god rom. it has no bugs, no fcs its very smooth
I do want a custom rom, but can I just flash thru recovery? Given that I'm already rooted.
Yes, flash thru xRecovery
Sent from my X10i using xda premium
ubertwik said:
I do want a custom rom, but can I just flash thru recovery? Given that I'm already rooted.
Click to expand...
Click to collapse
No, you need the baseband 71 as well and that needs flashtool....
Read the OP to any custom rom you want to flash.
Or, use pccompanion to upgrade to stock 2.3 then whilst you are there you can use flashtool to
a) root
b) ask root permissions
c) Install xrecovery (0.3 GB ready)
d) Unlock bootloader (Optional step)
then flash the rom of your choice...
LzVebz said:
You can upgrade to gingerbread with with pc companion..
but stock 2.3 from SE is very laggy & slow so install a custom gingerbread rom like Wolfs TW Gingerbread v7
Click to expand...
Click to collapse
I didn't have any lag on the stock 2.3.3 when I used it for a few weeks, about half unrooted, then rooted, and no lag either way. If you have 2.3.3 and lag check your running programs. Our phones are computers now so just like with a pc if you have too much in the background everything gets slow. When I was on stock 2.3.3 my phone was new so I was installing ALL sorts of things finding out what I liked but I always checked settings and permissions of things I was trying out. Bottom line you shouldn't have lag on 2.3.3.