[Q] Problem Restore Original ROM - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi guys, i've a problem, with HSPL 1-2 or 3 if i try to use LEOIMG.nbh original(taked from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
During the installation, at 10% it doens't works, it stop and reboot it, with this screen:
RUUNBH
PB811 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code errore
Please try again
What i need to do, to solve this problem? I've try to do task 29 on mtty but nothing, if i try to install a cooked room(after restore HSPL) the installation works.

first of all, this is the wrong section. you should use the Q&A section for such posts.
second, from the info you've provided you don't have HSPL installed.
And you don't need HSPL to flash a stock ROM.
Try flashing it using USB: Connect your phone in bootloader mode (tricolor screen) and wait until it says "USB" then run the RUU setup on your PC, when it tells you to connect using sync just ignore it and continue.

try this
http://forum.xda-developers.com/showthread.php?t=606713

Dr.Move said:
first of all, this is the wrong section. you should use the Q&A section for such posts.
second, from the info you've provided you don't have HSPL installed.
And you don't need HSPL to flash a stock ROM.
Try flashing it using USB: Connect your phone in bootloader mode (tricolor screen) and wait until it says "USB" then run the RUU setup on your PC, when it tells you to connect using sync just ignore it and continue.
Click to expand...
Click to collapse
Yes, so sorry, i ask an Super-User to move this thread.
I've try with this method, but i can't ignore, i can only exit setup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pajomoro said:
try this
http://forum.xda-developers.com/showthread.php?t=606713
Click to expand...
Click to collapse
I've try but doesn't work, it doesn't install SPL 1.42 and Bootloader. and i do this operation, only for install it
Please help me, i don't know what can i do

Problem solved! We can close it.
I've Use HSPL 2 for set HSPL1 and i've install my ROM

Related

Trying to unlock/cid/sim/ load new 6.1 OS into a G4 Orange SPV M3000

Now I been reading all of the stickies and after much confusion and some more readin i found myself into the correct Vista RUU loader, now for the ROM I found through orange one that has an extension of .nb0 and one on this forums ftp of .nbh which is the one I should be using once I do the soft spl and cid unlock?
I also kept getting a error connection saying my update utility is out of date, then with the Vista one(after installing all drivers etc) I get a connection error but only with those tool I am able to connect with the vista mobile device center with no problems before and after installing the 32bit drivers, should I be trying to load the files in the main phone menu or in boatloader? Cause I've tried both ways and receive the 2 previous mentioned errors.
I just don't know what I am doing right with those, if helps you guys help it is a Orange M3000 with I believe german ROM...sorry If I couldn't find the answer I have been reading for a few hrs before I decided I need to post for proper direction on doing this....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ahh, well, let me commend you brother for actually reading and searching before posting a problem! Much appreciated! But lemme ask you this...what is your phones info? IE-IPL/SPL, is it a G3 or G4? Once you can provide us that information, then would should be able to better assist you!
Sorry forgot that info for the SPL, I know its a G4 since the examples I read talked about the 3 leading 0's, but specifically it is
IPL/SPL: 2.16.0001
GSM: 01.04.10
OS: 2.16.1.1
Mkay, what I would recommend is going ahead and Hard-SPLing your phone(look for the Hard-SPL thread in this subforum, and follow the instructions EXACTLY!), and then upgradeing your GSM radio ROM to 1.69.X or something similiar, seeing as the one that you have is REALLY old. Upgraded radio ROMs offer better connectivity then older ones do. After you do both of those things, you can then safely upgrade to either WinMo 6 or 6.1...hope that helps!
Tried the HardSPL and got this:
Do I need to have a ROM(nb.nbh) loaded in the same folder as the Hard-SPL.exe I used?
No ! you don't have to have a Rom in the HardSPL folder,just Activesync with pc and run the HardSPL,it'll start to flash,don't worry if the screen goes white,it part of the procedure,but I assume you are trying it on WinVista.HardSPL doesn't work on Vista,better try on a pc with WinXP.

[Help] Problem of using the Hard-SPL-V7 for updating ROM

My phone model is x01ht, currently I am using WM6.0, and I want to update to WM6.1, so I use Hard-SPL-V7 and follow the instructions to update.
However, when I was at the below step, the image Ver. was 1.00.000.0 instead of Hard-SPL-2.10, and the instructor didn't say anything about the situation I have at this moment. Below picture is my case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the following one is the correct case:
How can I change the Image Ver. into the correct one? Please Help, and thanks in advance.
That is the same screen I got also, but I went ahead and flashed anyway (I like living on the edge! ) It did update to hard spl, so you should be okay.
Really? Since I was afraid my PPC would become a brick, I just can do nothing with this case. Thanks a lot!
Hard SPL doesn't update
I have image version 3.54.263.2
And when i try to update to hard-spl 2.10 it seems like it doesn't copy the image to the device ( Hermes 200 ).
It says the update is complete but when i check the device again it hasn't updated at all.
wm 6.0
Rom : 3.54.263.2
Rom date 07/09/07
radio : 1.47.00.10
ext rom : Rom : 3.54.263.102
anyone have a clue?
You're looking at the rom version, NOT the SPL. You need to go to bootloader to check your SPL - hold ok button above flywheel, power button and reset with stylus, hold all three in until you get to the tri-colour screen (AKA bootloader). You should then see your IPL and SPL. reset normally to get out of bootloader.
Cheers...
ultramag69 said:
You're looking at the rom version, NOT the SPL. You need to go to bootloader to check your SPL - hold ok button above flywheel, power button and reset with stylus, hold all three in until you get to the tri-colour screen (AKA bootloader). You should then see your IPL and SPL. reset normally to get out of bootloader.
Cheers...
Click to expand...
Click to collapse
Ahhh silly me, well now i feel stupid i was pressing the wrong "ok" button, thanks alot for the help m8.
now i can see
HERM200
IPL-1.04
SPL-2.10.Olipro
Thanks again for the quick reply ultramag69
No worries, just tell other people if they have the same problem... What comes around goes around...
Cheers...

Help Please soft brick ( FIXED )

Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA

Impressive root failure (please help!)

After managing to unlock via fake cid, installing twrp recovery, my attempt to install nj's Kangbang rom failed (something like com.android.core errors) Attempted Rancun Soff, made it partially through but my command window repeatedly froze at step where original RUU is installed.. (using win vista 32 bit) ..
Been going mad trying to fix this, and now can only gt to the bootloader screen- fastboot works, but get errors trying to flash any image- same with any attmpt to artificially place PJ53Img.zip (recovery, RUU, rom...) or any other file on external sd, then booting.
Essentially stuck with this screen (or Fastboot)....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
soccerfocus05 said:
After managing to unlock via fake cid, installing twrp recovery, my attempt to install nj's Kangbang rom failed (something like com.android.core errors) Attempted Rancun Soff, made it partially through but my command window repeatedly froze at step where original RUU is installed.. (using win vista 32 bit) ..
Been going mad trying to fix this, and now can only gt to the bootloader screen- fastboot works, but get errors trying to flash any image- same with any attmpt to artificially place PJ53Img.zip (recovery, RUU, rom...) or any other file on external sd, then booting.
Essentially stuck with this screen (or Fastboot)....
Click to expand...
Click to collapse
ukb is based off the old software, therefore you have to flash the boot.img of the old software via adb.nits has both te new and old boot images posted here somewhere.
unfortunately, at the moment i am unable to successfully flash anything via fastboot...no twrp, no stock recovery...
You said in the OP that you unlocked your bootloader. You'll need to re-lock if before the RUU will successfully install.
sorry, thought i posted this screenshot earlier- i am relocked but this is the only gui i can access
I know this seems obvious, but are you getting the stock image files from here: http://forum.xda-developers.com/showthread.php?t=1770978 ?

[Q] HTC Desire X only fastboot

Hello everybody!
I'm newbie in Android, but have a little experience in flashing several devices. I hope that dear guru of this Forum will help me; alone I already have not any ideas to do.
So. Here is the phone. It was played by the little child and now anyone does'nt know what was exactly did with the phone.
Now I have "body", that vibrates 7 times while booting and stops on the HTC logo. After that powers off only by long pressing "power" button.
When connecting to the PC it boots to bootloader and stops waiting user reaction:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I downloaded an "RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed" and tried to do something. It recognizes the phone, shows me OS version (2.20.xxx) and suggested to flash to the lower version. It's no matter for me, what version of software will be installed on the phone: I just want this device work. It starts flashing, reboots the phone to fastboot mode and waits something (RUU writes "waiting for bootloader"), after some time RUU says "can't connect to the phone" and suggest only one button - "exit".
I decided to go further and starts reading about ADB and fastboot. Downloads a couple of stock recovery images with 2.20, but "fastboot flash recovery recovery.img" fails with an checksum error.
After reading some forums I found an answer, that it happens because of locked bootmanager. Ok, I'd start searching any information about that. Registered at htcdev.com, followed instructions and obtained the unlock_code.bin. Executing "fastboot flash unlocktoken unlock_code.bin" causes choise menu on the phone's screen: UNLOCK or DO NOT UNLOCK and what is the most interesting: when I choosing UNLOCK - pushing on "power" button to confirm my choise did'nt do anything. Like I'm not pushing anything. Selecting DO NOT UNLOCK - pushing on "power" couses reboot without any changes.
After all of that my ideas are ended....
Can anyone help me what to do? Or it is better&faster to throw this over a window?
Thank You very much for any ideas.

Categories

Resources