Hey guys
I've the following problem: I installed Cyanogenmod 7 on my SGA from here.
I made a ext2 on my sd-card and set symbolic links from /data/app to /sd-ext/app... this works without any problems, but if I plug in my USB Cable and click on connect, my computer will mount the SDCard and SD-Ext.
So how can I do that the computer will only mount the SDCard and not SD-Ext??
Thank you for your answers
Greeezzzz
Related
cannot post in the correct thread in developers as i am a noob member but following the noob thread when i get to the step to mount the sdcard in recovery i cannot. i keep getting the error
E:can't mount /dev/block/mmcblk1p1 (or /dev/block/mmcblk1)
(no such file or directory)
what exactly are you trying to do? a little more info would be nice. you said you are trying to mount in recovery? for what reason?
Aren't the SD Cards auto mounted in Amon-Ra recovery? Wouldn't that error be due to the fact that they're already mounted?
Use Amon-Ra or Clockworkmod; While in recovery mount SD card.
I had to restore my laptop back to original factory settings for it to recognize my phone.
had nothing to do with the rezound, my computer woulndt install any new drivers..
if I had usb debugging turned on the computer wouldnt find the sd card or internal storage, as soon as I clicked usb debugging off, bang found sd card. I suggest trying this.
Sorry if i sound like a noob but can i take advantage of the ext3 partition on my SD using this version of CM?
I partitioned my SD using clockworkmod, which is why it's ext3.
only app i've tried is Link2SD but when i tell it there is an ext3 partition on the card it creates a script and asks me to reboot.
Once that's done and i access the app again it goes through the same motions and informs me that - "if im seeing this message then the partition is unable to be mounted during boot"
Appreciate any help
Here's a quick way to install Link2sd.
I preassume that your device is rooted and your sdcard data is backed up.I think,the mount script didn't work because of inappropriate attributes..Ok heres,how i installed Link2sd...
1.First of all download and install MiniTool Partition Wizard in your windows PC.
Connect your handset to the PC via USB.
2.Launch MiniTool Partition,you should see your SDcard mentioned in the list Under Disk 2 probably.
3.Right click your SDcard mentioned in the list, press "Move/Resize Partition"
4.In the Partition size,allocate bigger chunk of partition for primary partition.This is the partition your phone will access for general purpose.Say you allocate 7GB from your 8GB memory card.
Click OK.
5.Now Under disk 2. you will see and unpartitioned space of about 1GB.This partition will be used by link2sd.You may allocate your sdcard as you may wish.
6.Right click the upartitioned space to create a new partition under "Create As".If a warning popup asks for permission click YES.
7.Under New window Create As,choose "Primary".For File System type choose 'FAT32'.though you may choose among ext3 or ext4,either is supported by link2sd.NTFS is not supported by Link2sd or android OS.For partition size take whole unallocated space.Click on OK
8.Click Apply button<upper left corner in the screen>.
9.Restart your phone.
Again use your Link2sd app to create mount script.Now your app should work fine.
Don't forget to hit THANKS if i helped you.
I would not suggest you to create the Link2sd partition as a FAT32 one: this way when you will connect your phone to a PC through the USB cable Windows will mount all the 2 partitions automatically (with all negative consequences you can imagine); this issue will not happen on Linux, however; while with the Link2sd partition formatted as extX you will be able to use your linked apps while the phone is connected to your PC and the first partition is mounted, it doesn't matter if you are on Linux or Windows (tested )
Regarding your problem: try to tell the Link2sd script activator that your partition is an ext4 and see if it works.. I hope so, anyway let us know..
@brainvision
yeah thanks,extX would be better..bt i think windows doesn't mount two sdcard Fat32 partition at a time.i may be wrong in this term, bt sometime back,when i used to use rooted android 2.1,windows would mount only my 1st primary partition of sdcard..however under ubuntu..both partition would load bt without affecting the phone apps.
thinkfreedom said:
@brainvision
yeah thanks,extX would be better..bt i think windows doesn't mount two sdcard Fat32 partition at a time.i may be wrong in this term, bt sometime back,when i used to use rooted android 2.1,windows would mount only my 1st primary partition of sdcard..however under ubuntu..both partition would load bt without affecting the phone apps.
Click to expand...
Click to collapse
oh sorry I'm not a winZoZZ user since a lot of time!! I'm a slacker now!!
Regarding Linx OS: I set up my Slackware so that it doesn't auto mount external disk, so i can plug in the phone and activate the USB Mass storage without still mounting it: this way I can mount only the first partition; but in a auto-mount situation I fear that the the phone apps would be affected by USB Mass storage activation!
Hey guys, wondering if you could help me. I'm running Jelly Blast V-3.5, with Rafaels Kernel 2.6.35-7 on my S5380i. I've been trying to increase the internal storage on my device by partitioning my 32gb card in CWM with a 1gb ext. I've tried every solution I've found on this forum but I simply cannot get it to mount. Link2sd yields 'invalid argument' no matter where I point it, and when trying to format/mount the ext. in CWM it just says 'apps 2 sd partition not found'.
Here's a list of the things I've tried which have failed to solve this:
Partitioning in minitool, with various sizes and exts, and setting the partition as active.
Flashing conrod script, doesnt seem to be effective.
Script to mount sd-ext at boot, followed iamareebjamal's guide found here http://forum.xda-developers.com/showthread.php?t=1971689
S2E
Mount2SD
I'm completely at a loss, and with the internal storage of the S5380i being what it is, it would be great if anyone could offer me any advice.
Thanks!
do one thing , I'm recovery check if sd-ext is mounted
it used to happen to me that when I flashed new roms I had to mount sd-ext from mounts and storage
so mount it then reboot your phone
go to link2sd and create mount script as ext4
if problem persists , go in storage info of link2sd so see if the partition is mounted
if not you will have to enable auto mount at boot ( if option present in rom ) or mount using terminal emulator
Sent from my GT-S5670 using xda premium
soham jambhekar said:
do one thing , I'm recovery check if sd-ext is mounted
it used to happen to me that when I flashed new roms I had to mount sd-ext from mounts and storage
so mount it then reboot your phone
go to link2sd and create mount script as ext4
if problem persists , go in storage info of link2sd so see if the partition is mounted
if not you will have to enable auto mount at boot ( if option present in rom ) or mount using terminal emulator
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Thanks for responding.
Attempted to mount in CWM but just receive an error. It's as if the partition isn't there at all. Re-partioned the card but still, no luck.
My rom doesn't have the auto mount at boot option, so it looks I'll have to mount with terminal emulator. Could you run me through the process, or point me towards a guide? Cheers
what error did you get in cwm while mounting ?
yry this line in terminal
mount -o rw /dev/block/
mmcblk0p2 /sd-ext
also is mount2sd file present in your /etc /init.d folder ?
Sent from my GT-S5670 using xda premium
The error in CWM when attempting to mount is: 'Error mounting /sd-ext!'
'mount -o rw /dev/block/mmcblk0p2 /sd-ext' in Terminal Emulator yields the following line: 'Usage: mount [-r] [-w] [-o options] [-t type] device directory'
The mount2sd file is not currently present in my init.d folder as I restored my phone from a backup, though when it has been there, the error in CWM is still the same.
The only difference I have noticed is that when partitioning with MiniTool, Link2SD will say that the partition is not mounted, but when partitioning with CWM it will say that the partition is not found.
galaimo said:
The error in CWM when attempting to mount is: 'Error mounting /sd-ext!'
'mount -o rw /dev/block/mmcblk0p2 /sd-ext' in Terminal Emulator yields the following line: 'Usage: mount [-r] [-w] [-o options] [-t type] device directory'
The mount2sd file is not currently present in my init.d folder as I restored my phone from a backup, though when it has been there, the error in CWM is still the same.
The only difference I have noticed is that when partitioning with MiniTool, Link2SD will say that the partition is not mounted, but when partitioning with CWM it will say that the partition is not found.
Click to expand...
Click to collapse
Did you format ext2 in the secind partition? Normally when you format with cwm, first partition is fat32 and the second partition is ext2. Try to format all available space to 1 partition and using cwm format the card to two part. May be partitioning before makes cwm recognize the wrong part and gives error.
:: Today is the first day of what's left of your life. ::
ChelebiTech said:
Did you format ext2 in the secind partition? Normally when you format with cwm, first partition is fat32 and the second partition is ext2. Try to format all available space to 1 partition and using cwm format the card to two part. May be partitioning before makes cwm recognize the wrong part and gives error.
Click to expand...
Click to collapse
Ensured all the space on card was unallocated and partitioned in CWM recovery.
Attempted to mount /sd-ext again and still receive the following error: 'Error mounting sd-ext!'
Attempted to format /sd-ext and receive the following error: 'No apps2sd partition found. Skipping format of /sd-ext'
Tried so many different ways/combinations of partitions now. Do you think it could be a kernel or rom issue?
galaimo said:
Ensured all the space on card was unallocated and partitioned in CWM recovery.
Attempted to mount /sd-ext again and still receive the following error: 'Error mounting sd-ext!'
Attempted to format /sd-ext and receive the following error: 'No apps2sd partition found. Skipping format of /sd-ext'
Tried so many different ways/combinations of partitions now. Do you think it could be a kernel or rom issue?
Click to expand...
Click to collapse
Make sure you have backed up all your files in your sdcard they will all be deleted and recreated with two partition.
In CWM enter Advanced --> use Partition SD Card
Set your second (ext2/3/4) partition size then set swap to zero (0).
ChelebiTech said:
Make sure you have backed up all your files in your sdcard they will all be deleted and recreated with two partition.
In CWM enter Advanced --> use Partition SD Card
Set your second (ext2/3/4) partition size then set swap to zero (0).
Click to expand...
Click to collapse
This is exactly what I've done, countless times. It simply will not mount. Really struggling to understand this problem.
galaimo said:
This is exactly what I've done, countless times. It simply will not mount. Really struggling to understand this problem.
Click to expand...
Click to collapse
Using a card reader enter your sd card to a computer and test if card has a problem or partitions are correctly created. If your answer is yes you may have a misconfig on your phone. Make sure u have the latest busybox available, have rooted your phone correctly, vs...
Or create your partitions in computer and try...
Ps: I created my partition in Stock Rom. So it must NOT depends on kernel or rom...
ChelebiTech said:
Using a card reader enter your sd card to a computer and test if card has a problem or partitions are correctly created. If your answer is yes you may have a misconfig on your phone. Make sure u have the latest busybox available, have rooted your phone correctly, vs...
Or create your partitions in computer and try...
Ps: I created my partition in Stock Rom. So it must NOT depends on kernel or rom...
Click to expand...
Click to collapse
Partitioned with CWM again. Plugged in to laptop and in MiniTool and this is the result:
galaimo said:
Partitioned with CWM again. Plugged in to laptop and in MiniTool and this is the result:
Click to expand...
Click to collapse
That unallocated space is your problem. Try to create an ext2/3 partion with mini tool. And if minitool gives error than you probably have a defected sd.
And one more suggestion try the cwm in rafaels kernel thread.
Edit: Sorry for cwm use http://forum.xda-developers.com/showthread.php?p=23715776
:: Today is the first day of what's left of your life. ::
ChelebiTech said:
That unallocated space is your problem. Try to create an ext2/3 partion with mini tool. And if minitool gives error than you probably have a defected sd.
And one more suggestion try the cwm in rafaels kernel thread.
Edit: Sorry for cwm use http://forum.xda-developers.com/showthread.php?p=23715776
Click to expand...
Click to collapse
Thanks for taking the time to talk me through this.
Turns out my SD card is defective, swapped for another card and I've now increased my internal storage!
I'll be sending the other one back.
Thank you again for your time :good:
ChelebiTech said:
That unallocated space is your problem. Try to create an ext2/3 partion with mini tool. And if minitool gives error than you probably have a defected sd.
And one more suggestion try the cwm in rafaels kernel thread.
Edit: Sorry for cwm use http://forum.xda-developers.com/showthread.php?p=23715776
:: Today is the first day of what's left of your life. ::
Click to expand...
Click to collapse
Thanks for the link! seems like my CWM wasn't detecting sd-ext.. this fixed!! feared my sd card was ruined.. really thanks a lot!
i yesterday install a new rom to my rooted s3(intl) today i try to reboot another rom i was stuck in cwm recovery...i wanted to install another rom from my sd card. but it says cant find any file in sdcard.... i cant back restore cz i dnt have back up file in phone as i moved my back up to laptop...when i search abt thz i found out this hapn because my sd card having some issue.
You most probably have an unpartitioned sdcard, clockworkmod however assumes that is partitioned and wants to mount the first partition (/dev/block/mmcblk0p1).
You can fix this by repartitioning your sdcard so that it has a mountable fat-formatted first volume and then retry.
If you don't mind using the commandline, boot to recovery and connect via adb shell to it, then mount your sdcard manually: mount /dev/block/mmcblk0 /sdcard and retry.
Technical explanation:
cat /proc/partitions lists:
/dev/block/mmcblk0 is your FAT formatted volume (no more partitions at all)
should be:
/dev/block/mmcblk0 (whole device)
/dev/block/mmcblk0p1 (1st partition, FAT formatted)
/dev/block/mmcblk0p2 (sd-ext partition, only for those that use SD2ext and such)
im new to rooting and these stuffs plz explain what is adb shell and how i can mount my sd card....
btw i also tried factory reset it didnt wrk too....i dnt want any files i just want my phone back cz i badly need it....plz help me on this guys :crying: plzzz :crying:
In cwm under mounts and storage there should be the option to format sd card...
Adb is android debugging, it's used to connect to, pull/push files, get logs and more from your phone using a terminal or command prompt window.
http://developer.android.com/tools/help/adb.html this site shows the adb commands available including shell which is connecting to your phone via the terminal to allow you to enter commands.
Also maybe try mount USB storage through cwm and see if you can connect you phone to your pc and transfer the files needed.
If I helped you in some way, take a second to hit the Thanks button.
Hi guys, I'm new here!
I'm having some problems with my S2 with NeatRom SuperLite. When I try to access to gallery or download some files, I get the error message: "Not enough space. Delete unused items..... etc" . I found that I have a .Trash-1000 folder that has lot (!!!) of 2/3 Gb files! The problem is that I can't delete this folder, if I try with a file explorer I get a "can't delete this file" or "permission denied", if I try from Linux terminal I get "file system is in read-only mode".
I also tried to format /emmc from recovery or simply re-installing NeatRom, with no results.
What can I do?
okey i had this problem to,
step 1:
got to storage or if you get a notifaction about formatting your internal sd card or external sd card
step 2:
reboot
or
step 1:
downlaod root explorer
step 2:
locate your sddisk1 or sddisk0 or exdisk (external disk) and you see that is says ro(read-only), now that needs to be rw (read-write)
step 3:
reboot
or
step 1:
use any recovery mode, not the stock, use like cwm
step 2:
go to mount/storage
step 3:
mount everthing
srry i did this everthing, and suddenly i got fixed, i don't nog exact what was the fix ;D i hope it is fixed
The sII mounting paths seems to be different of other phones.
storage/SdCard0 - Internal Storage
storage/ExtSdCard - External Card Storage
storage/UsbDriveA to UsbDriveF - External storage connected by Usb Port using OTG Cable
/ - ROM Storage
I recomend ES File Explorer as your file explorer
+1
I was with same problem with teamxd rom. I could not delete any file. I made a full factory reset with erase all storage and get bootloop. After that I flashed many different roms but in all roms my all audio/video apps not running smoothly. my bad luck. Hope you get right guidelines here.
SkyaTura said:
The sII mounting paths seems to be different of other phones.
storage/SdCard0 - Internal Storage
storage/ExtSdCard - External Card Storage
storage/UsbDriveA to UsbDriveF - External storage connected by Usb Port using OTG Cable
/ - ROM Storage
I recomend ES File Explorer as your file explorer
Click to expand...
Click to collapse
but the problem is that the storages are in RO (Read-Only) but it most be RW (read-write)