I recently purchased a Nordic Track 9500 Elite Pro. This bad boy has a 10" android tablet built in. They really don't want you messing with the android part much, but I am sure there are plenty of other users out there like me that want to do more!
This is my first post so I am unable to show the pictures via the link. Hopefully you can copy and past the text to view the images. I will try to repost on my website so it all flows.
I don't see where a post like this would go, I am not sure if at some point it would gain it's own device forum... That would be exciting. So for now I will post here. I will also post my initial findings for others in the community that may want to purchase this treadmill and can't find any information regarding the built in Android Tablet with WiFi.
This image shows the version information. From what I can tell it looks like they purchase an APAD from someone and then stick it inside of their device. They also must have wrote some special drivers and software to interface with the equipment and hardware. I was very happy to see a mainstream current android OS.
Android OS 2.2
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0027.jpg
Click to expand...
Click to collapse
Here are the pre-installed apps. Pretty basic. (note: I was able to find an APK and install Last.FM that wasn't included) Also a major bummer to see was that there wasn't a market application.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0026.jpg
Click to expand...
Click to collapse
This is the typical workout screen you see.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0024.jpg
Click to expand...
Click to collapse
I also noticed that the device doesn't have very much memory. This could be due to the built in applications taking up so much space. It only had about 57MB of internal memory free, but it had a built in 2GB SD Card. I have not gotten to the point where I have needed to take it apart yet to see if there is a replaceable SD card. I may wait another 5 years for my warranty to end to do that.
I have tried to install some apps but have not had very much luck. The only app that was I was able to install was the Last.FM.
I tried the follow apps, and they didn't install:
1. Market
2. Angry Birds
3. Pandora
Other disappointments:
1. Designed to not be in the Android Interface. They have an application that runs, and makes it tricky to get to the android desktop. It takes about 3 clicks to get from the main workout screen back to the Android Desktop.
2. The screen is not capacitive, it is resistive. I don't know how much more I need to say about that.
3. Only 3 buttons. Back, Menu, Home. Home takes you to their software not the android home screen. Long press on home does nothing.
4. When i go to the desktop the Time is all over the place. I have tried changing settings in every spot possible but something is telling it what time to think it is, occasionally it is correct... Just don't get it.
Even with the disappointments this thing is sweet. I wish i could install more apps, stream videos from a PC over the WiFi connection and stream music from a PC over the WiFi connection. Maybe with the help of the community we will figure some of these items out... Or I will be the only one who has this that knows about this website!
ntsteele,
How is your experience up to now with your 9500? I am looking at getting the c1250, which is the same as the 9500, but with a smaller motor and no decilne. Is the 10" screen worth it? The rep at Nordictrack told me the only differcence between the 7" screen is the web browser, the google maps display, and some basic apps. But overall the workout system is the same as the 7' display of the 1750 commercial and that you can view the google maps by logging in on ifit.com. Thanks for the info and screen shots.
iFit Android App
Have you or has anyone else been able to pull the apk files off of the NordicTrack Elite 9500 Treadmill. I would be interested to see if it works on any adroid phone to view the menu system.
I played with this today at Google IO. The rep said that the integrated tablet was rev 1 and that they wanted to eventually let users connect their own devices.
what do you need to press to get to the android home screen?
Where I work at there is a Proform Trailrunner 4.0 treadmill that has 10" Android tablet screen. From what I have been told nordic track and proform are made by the same manufacture or something. It was returned because of a broken display unit. Of course I wasn't going to let them throw the old one away so they let me keep it. I trashed the main display and now I have the 10" tablet but cannot power it because the treadmill doesn't operate without a magnetic key. How could I power this thing and see if it works?
I got the new incline trainer x9i which has the 10 inch android interface. I am interested to get in and try installing apps as you have but I am unable to even get to the android home screen. The only time I see it is when I turn the machine on and it is booting up, the screen comes up for a few seconds to where I can hit on the applications button and see what is on it. But within a second after I see the apps it automatically gets routed into the machine exercise interface and I have not figured how to get back to the android home screen from there. How did you do it? It would sure be nice to install a different browser. I hate the fact that I cannot create my own shortcuts. Anyway, love the machine.
How to get to the Android Home Screen
Any luck finding out how to get to the Android Home Screen? I am wanting to do that also. I was able to get to it one time accidentally, but haven't figure out how to stop the machine interface from loading since.
Home Screen
Ok, same question. I just got a C2150 which is a similar model to the 9500. Slightly smaller motor and belt, but same basic thing with the 10" tablet. I believe it's capacitive now, but still not great as far as that goes.
I too have hit the setup icon when it's booting and it goes to the Android setup screen for a second and then continues to boot into the Nordictrack IFit proprietary stuff.
So I can't believe the posts with the images and no explanation of how you got there? Please share with the rest of us.
Also, my console has a USB connector at the top of the thing. Any idea what if anything that'll let me do?
Thanks!
Anyone figure this out? Seems a shame to have a 10' screen and not be able to install apps on it. There must be some button combination that the Icon service team would use to stop the auto load of the iFit interface.
Internal Pictures
I took the tablet apart to see what information can be gathered. Apparently, HANNSTAR (TAIWAN) manufactures the board (HANNSTAR J MV-7); which uses a Samsung ARM8 CPU(5PV210AH-A0 1044); has 512MB; and a 4GB SANDISK FLASH (SDIN2C2-4G).
I haven't been able to find sufficient info to track a compatible ROM, yet I can't imagine for the life of me that HANNSTAR would design this just for Nordic. I am posting some pics hoping that someone might be able to id the hardware, which in turn might help point to a more fruitful search for a workable ROM.
Try to upload pics but not sure if it worked. It's late, and I can't figure out how to do it smoothly yet.
I'm gonna do another bump. I have a similar treadmill (or maybe the exact same one, I lost the the manual with product name). It is of the X9i series and when I saw it in the store, I had to go for it. I was a bit irritated to see that you are locked to the iFit application and you cannot return to the launcher. I need a male to male USB cable to see if I can get a bit of ADB on it.
From the (crappy) performance of it, I can tell it has about 512 MB RAM, a dated CPU clocked at around 600-800MHz, the screen looks like a crappy TFT display at 1280x700. Lastly, this thing runs Froyo. Mine features a full USB port and an Audio in port. Not much to screw around with. Downloads are disabled in the browser, and the Menu key does nothing.
I think something can be done though. The application that controls the treadmill can't crash as it is, and if it ever does FC, the motor shouldn't stop. NordicTrack doesn't have a recovery image up for some reason (thanks, NordicTrack -_-) so that's even less to work with.
Nevertheless, something can be done. It's not really a fun thing for an Android enthusiast to pick up an Android device with such dated hardware (the tredmill itself, as just tredmill is amazing).. Plus, it was $2,100 at Sears.
---------- Post added at 08:48 PM ---------- Previous post was at 08:43 PM ----------
here is a video of the Treadmill and the board;
http://www.youtube.com/watch?v=eKyf6MHIefk
USB and Audio in is on the right side of the console.
I've had my Nordictrack 9500 Pro for about a year now. Still working well for the most part (I do have messed up deck tension adjuster that I need to call support about).
Would love to be able to unlock the Android device to at least install Netflix, Pandora, etc.
I have had one over the air firmware upgrade that went pretty smoothly. Was hoping more updates would come from Nordictrack, but it has been a long time since that one.
Has anyone else noticed that the Speed Calibration utility under the iFit controls says that it isn't enabled yet? Maybe there's hope for future updates.
fanVrARCHITECT
Greetings,
I have been following this thread as a 9500 owner as well, and looking at what has been posted and see if there is any follow up.
1.) like everyone else what startup combinations may have disabled Nordic Tracks proprietary software.
2.) the usb socket on the top of the console, has anyone had anyluck attempting a usb male to male connection on a laptop? If so what has been tried?
3.) any idea of maybe porting something over via the Ifit updates or account? I noticed the HDvideo inside of the program is pretty descent from what I've seen, and looks like the video plays in the center of main app..just a thought.
I'm looking at getting the male to male usb cable and trying to interface it with the below. .. at least curious if the cable will talk, and most likely this unit is not root so view only but maybe a start if it works.
//www*howtogeek*com/howto/42491/how-to-remote-view-and-control-your-android-phone/
Cheers,
devmo
Did anyone figure out how to get android home screen????
I read somebody was able to email themselves an apk and install it? The tablet enables sideloading? Ding ding ding! I'm going to try sideloading launcherpro or any other replacement launcher to attempt to hijack the home screen
Update: Didn't work on my c2150's tablet. Bastards.... I did however get my c2150's to boot into "safe mode" which I have no idea what that entails. While it was powering on, I held down home and back I believe was the combo.
Update: SUCESS!!! So by booting into "safe" mode, you can hit the preferences launcher while the device is booting to interrupt the ifit loading. From there, go enable unknown sources. Then launch the browser and google "z4 apk" and download it and run it. Did permanent root on mine and it worked.
ENJOY
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
jsteelm said:
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
Click to expand...
Click to collapse
Sorry - can you tell me the exact steps involved here. How do I get to safe mode and then what? I tried Home Back while powering on and it still goes to the ifit screen
You know I'm really not sure what trick it is to make it stay. I had good luck getting it to stay in android rubbing home/back/menu while it booted and as soon as I saw the android home screen, hit the preferences launcher and then grabbed the top menubar and half pulled it down. All I know is that when you get it to stick in android, its always in safe mode which is triggered by some combination of those buttons on boot. Even then it will boot into iFit, but if you go to the settings first, in safe mode, it wont exit that screen.
Nordictrack commercial 2150 Android Safemode
Very simple folks. Turn treadmill on and once you see ANDROID appear in the center of the screen, begin pressing the dashes button that is between the home and back buttons on the console. Not sure if holding down works any better. An "unable to load widget" will be seen in middle of screen once the I-FIT software has stopped and safe mode will appear at the lower left hand corner. You'll then be able to check out the various Android options etc for your tablet. Be careful in editing anything unless you know what you are doing! Wouldn't want to brick your treadmill unnecessarily. It took awhile to find the key to safe mode access, due to limited info out there, but I hope users will continue to make some progress on exploiting this device and maybe we'll be able to use it to our liking. I would like to stream my dish television to the tablet like I do on my i phone or i pad. Being able to install the dish app via google app store is what I'm looking forward to. I want to be able to watch tv on my treadmill while exercising. Please keep this thread going! I'm sure that future software updates may allow for a better user interface. The challenge is certainly in the storage capabilities in the tablet itself and the sd card inside.
There are multiple threads that address the webtoptosd project, containing guides, discussions, etc, but I'm not allowed to post in the development forum yet (grrrrrrr, lol). Anyway, sorry if this is a stupid question, but I want to know whether I can install ubuntu, like shown in these threads:
[webtop] webtop2sd 1.1.0
[webtop] webtop2sd discussion (currently version 1.1.0)
[GUIDE] WebTop fixes for fully functional Ubuntu (WIP)
But I still want to be able to use the original webtop os. Great start speed, integration with the phone, etc. That's the reason I bought it and want to keep it, but want both.
How would I go about doing this? e.g. swapping out microSD cards or something?
Thanks everyone
EDIT 1: On second thoughts, I suppose my real question should be different upon viewing a couple of videos... If I use these kinds of instructions to get a full OS like Ubuntu or Debian, does it keep the mobile view application for using the phone from the lapdock screen... Also when I pull out the phone, is there any chance it will still give that nice little ability to continue browsing a web page on the phone with built-in browser?
First off, I realize this needs to be in the development forum, but I don't have permission to post a new thread or (ideally) just reply to the on-going thread already created (http://forum.xda-developers.com/showthread.php?t=1075054). I have Backtrack 5 running, it boots fine, touch screen works, using USB keyboard. I get to the login screen, it shows Clementine under the PC icon, but where the field should be to type in username then password is a straight white line that seems to be inactive. I tried copying the /etc/shadow- to /etc/shadow without success. I tried just hitting enter to see if I'd get an incorrect login popup, but did not. Also just tried typing "root/enter/toot/enter" without seeing a cursor, no dice there either. I followed the instructions precisely-twice- and still am in the same hole. It almost sounds like a permissions issue, but I untarred the bt5 archive on a Fedora 18 box, so there was no Windows permissions gumming up the works. Anyone else ran into this or have an idea where to look? Again, I apologize for the incorrect placement of this post, it's the closest I can get
I got a Kaya Android tablet which was lock after the user entered wrong pattern several times. The tablet presents the unlock with gmail screen but, guess what!, it does not connect to any even public unencrypted WiFi so that it is impossible to unlock with gmail account.
I tried to connect to it from adb via USB but it does not recognized as ADB device, only as USB mass-storage.
And, finally, magic key combinations like power-volume-up does not give me any recovery or boot loader.
Is it the stage where I go and throw it to garbage or there is something else left?
Thanks.
So, there is NOT much documentation for your device (surprise! lol) but I if you have the Ktab Classic 7" as I am assuming/hoping (info found here: http://ankaka.en.alibaba.com/produc...Classic_7_Touch_Screen_tablet_pc_android.html) , then it runs the old WM8650 chip. There is a forum for these types of things here: http://www.androidtablets.net/forum/wondermedia-wm8650-tablets/ Though nothing says it is specifically for you, I know that I have worked on a few of these before and used the Uberdroid rom to make it run a bit better. If your tablet is what I am thinking, there is some hope as the method to update the rom involves just copying the files to the storage, selecting which version to try on the PC, and rebooting and it does the rest. http://www.androidtablets.net/forum...repair-update-your-android-tablet-wm8650.html The downside to this, is that it is hard to know which tablet it shares the most with as the Uberdroid rom supports dozens of different ones and typically the only differences are screen size, touchscreen functionality, and maybe wifi, if I remember right. Just have to keep playing around with it till you find the right combo. If that isn't the particular version of the tablet you have, then some more research would be in order, but these things obviously aren't very popular and the less popular or supported, the harder it is to find anything worthwhile. As it is, you have to scour mostly foreign websites and use Google Translate to come close to figuring out what's going on. lol Good luck!