I need to upgrade my lg optimus one to v20g, but my usb is broken about data exchange, so I was wondering if someone could give me a nandroid v20g so I can use my clockworkmod 3.1.0.0 to restore it in my cell... any help?
A little help?.. even a different stock rom would be fine.. what matters is that is a stock one like v20c for example.
If you follow the first 5 lines of the install guide of this ROM you end up with a stock V20g from September 21st (or 20, 22, 23, I'm not that sure, but it's the most recent one) with ClockworkMod. I guess it's european, since the portuguese was from Portugal and the english from England.
Oh, sorry! You meant something that doesn't require USB, right? Are you able to transfer through USB in Recovery?
First of all thanks for the attention you gave to me.
Unfortunatly my USB dosen't work in such a way.
I have tried in recovery mode, in emercengy mode, without battery using LGMDP, but my USB seems to be dead.
The only way could be restoring a nandroid backup that was done by another phone via ClockworkMod.
Could you be this one?
P.S.
Thanks for the link, it looks really interesting!
Since I wanted to flash the latest stock ROM (brazilian v20a), I added one more step installing the v20g I mentioned earlier and created a backup with clockworkmod...
See if it works...
I'm not allowed to post links, but go to www [dot] megaupload [dot] com /?d=249VCD69
Great!!!!
I'm downloading it!
Thanks a lot!
yuripg1 said:
Since I wanted to flash the latest stock ROM (brazilian v20a), I added one more step installing the v20g I mentioned earlier and created a backup with clockworkmod...
See if it works...
I'm not allowed to post links, but go to www [dot] megaupload [dot] com /?d=249VCD69
Click to expand...
Click to collapse
I'm really grateful for your effort but it didn't work out , maybe we have different clockworkmod.. mine is 3.1.0.0, which is yours?
Too bad... It's the latest 5.*
Maybe if you install the latest ROM Manager and flash this clockworkmod...
I rooted my P500 for the first time last week and I'm not that experienced with these stuff.
Good luck.
Thank you a lot the same!!!
I really appreciated your effort!
Ciao.
yuripg1 said:
Too bad... It's the latest 5.*
Maybe if you install the latest ROM Manager and flash this clockworkmod...
I rooted my P500 for the first time last week and I'm not that experienced with these stuff.
Good luck.
Click to expand...
Click to collapse
I did as u suggested me and I used the latest ROM Manager and flashed your clockworkmod.
It worked out!!!
Your nand works perferctly!!!
Thank You! Thank You! Thank You! Thank You!... Thank You!
XD
Related
hey folks , i have got a samsung fascinate and a Optimus one.
i am well versed with whats going on with the fascinate sCENE ,
but i donno i have never kept pace with the LG optimus one scene ,
I have a totally virgin LG O1 with V10e atm
I want to root it and install gingerbread that too the stock .
can anyone chip in pl. I donno nothing about O1 rooting methods and stuff.
regards
lord dredd said:
hey folks , i have got a samsung fascinate and a Optimus one.
i am well versed with whats going on with the fascinate sCENE ,
but i donno i have never kept pace with the LG optimus one scene ,
I have a totally virgin LG O1 with V10e atm
I want to root it and install gingerbread that too the stock .
can anyone chip in pl. I donno nothing about O1 rooting methods and stuff.
regards
Click to expand...
Click to collapse
To install GB you must flash the new baseband. So you either flash the whole ROM via KDZ or flash just the baseband via LGMDP (a small search will reveal everything I say, so there's no need to post links).
If you flash via KDZ you will have a stock phone. It's a "clean" flash. If you want to root it Gingerbreak has no use, search this section for threads about GB rooting, there are plenty.
If you flash the baseband via LGMDP your customrecovery will remain and you will be able to flash one of the already rooted GB roms here.
thanks mate !!!
actually i followed the KDZ method
outlined here http://forum.xda-developers.com/showthread.php?t=1060121 ( although its for froyo but i believe the process should be same )
used the 20G file from this link : http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AVDRBK/V20g_00/V20G_00.kdz
The flashing went fine but the phone is not booting
i am stuck on the android LOGO
what should i do
lord dredd said:
thanks mate !!!
actually i followed the KDZ method
outlined here http://forum.xda-developers.com/showthread.php?t=1060121 ( although its for froyo but i believe the process should be same )
used the 20G file from this link : http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AVDRBK/V20g_00/V20G_00.kdz
The flashing went fine but the phone is not booting
i am stuck on the android LOGO
what should i do
Click to expand...
Click to collapse
Turn off the phone and try a hard reset first (home+vol down+power)
Thanks mate , reflashed everything and then did a hard reset.
booted and working fine now.
but somehow there is no file manager in it LOL
got ASTRO for that.
Could you pl link me to a thread where all the KDZ files are listed with their download links.
Also could u help me to root this phone with the easiest and safest method ( actually its my primary no )and if there is any voodoo kernel available to speed things up for this.
regards
lord dredd said:
Thanks mate , reflashed everything and then did a hard reset.
booted and working fine now.
but somehow there is no file manager in it LOL
got ASTRO for that.
Could you pl link me to a thread where all the KDZ files are listed with their download links.
Also could u help me to root this phone with the easiest and safest method ( actually its my primary no )and if there is any voodoo kernel available to speed things up for this.
regards
Click to expand...
Click to collapse
For root, see here.
For firmwares, see here or use this tool.
If you want to flash kernel try franco's gingerbread kernel.
Thats great
gonna try em now
regards
Hi!
I have an Canadian tab (GT-P7510XXKG6) I need to "restock" my tab.. anybody have the rom?
thanks
Yeah I also would love to get the Canadian Stock 3.1 rom to do a fresh reset.
Any ways of doing it with an Clockworkmod's backup ?!
Thanks
benyx said:
Any ways of doing it with an Clockworkmod's backup ?!
Thanks
Click to expand...
Click to collapse
Yes, you can use the nandroid backup to restock the tab.
Just flash the nandroid backup of the stock ROM (do a full wipe if you want)and then flash the stock recovery using ODIN.
yeah do you have a stock 3.1 touchwiz CANADIAN Clockwork mod backup. I could certainly use it if that's possible by you to post one. Thanks
dvirring said:
yeah do you have a stock 3.1 touchwiz CANADIAN Clockwork mod backup. I could certainly use it if that's possible by you to post one. Thanks
Click to expand...
Click to collapse
even if my Clockwork mod backup is rooted?
Just downlod your version from samfirmware.com
Problem is samfirmware doesn't have a canadian stock firmware version!!!
Sent from my MB860 using XDA App
Beep Beep, Anyone able to get the stock rom yet
Did anyone try here?
http://translate.google.co.in/translate?hl=en&sl=pl&tl=en&u=http://sampro.pl/
I have my cwm 3.1 stock back up just dont have it uploaded
Can you upload it somewhere for us to access?
Please...
Had newton rings problem with my brand new tab so had to return it . New one should arrive monday and i will back it up rite out the box . And host it
I have a copy of my Canadian WIFI 3.1 p7510xxkg6 stock unrooted cwm backup.
If anyone needs it PM me
Link now in sig
Link is broken !
Do you know how old 3.1 HC is? Ofcourse its broken silly! 3.2 has been released and is on sammobile.com
That was posted on 20th Jan, more like a revamp..
Thank you very much bertiespeed ! I was searching very hard to find it. It work's like a charm !!!
I'm also looking for Canadian stock rom. Can someone please give me the link to download it?
Thanks a lot.
OMG guys,
it doesn´t matters for which county the stock firmware is provided,
when you have anWIFI TAB!!
Just download a European or North American firmware, they all work the same way and offer several languages!!!
There you can download the latest firmwares-> Here!!!
Hi, recently bought an Samsung Fascinate for Telus so i could enjoy yet again more Android powerfullness! ( Had an HD7 before and i didn't really liked it )
So i started hacking my way trough this phone (wich is far more complicated than my previous HTC Desire or Motorola Milestone) and i got to the point in wich i have the WeUI Rom installed! Woohoo!
Except, i'd like to try a AOKP Rom (Kang's for example) but in every topic they talk about CWM Recovery fixed for CM7 (wich i have already downloader and tried to install MANY MANY times)
Here's what i was doing in order to get that CWM Recovery :
1. Get back to Stock Froyo using Odin files.
2. Update to 2.3.3 Using Samsung Kies
3. Now Flash CWM Recovery Fixed for CM7.
4. Odin Crashed and Failed at Recovery.Bin now in boot loop...(HELPP!!!))
.... Kidding made myself a JIG with some tutorials in here so i wont have to buy one
note : i also tried starting from STOCK 2.3 to Speedmod kernel recovery and Flash the recovery trough the recovery but it just... doesnt do anything?
1.Redo 1 to 2....
2. Get up with Glitchy Kernel with WeUI and it works...
3. But i'd really like to get those AOKP wich seems to be way more battery efficient!
Now i was wondering if that was the real method in order to do this or if there was a special order for TELUS user as i'm aware that there's some tiny things that are different.
Thanks in advance for your help and before you ask me if i read those tutorials yes i did.. as a proof
http://forum.xda-developers.com/showthread.php?t=923712
http://forum.xda-developers.com/showthread.php?t=1540809
and of course my Rom
http://forum.xda-developers.com/showthread.php?t=1544143
Oh and by the way i'd like to apologize if i made a MASSIVE english error torment.... i'm french
make sure anyfiles you use are specifically for telus or you will brick the device.
Try View attachment cwm4-bml-i500.tar. I have never used it but it might work for you.
P.S. Please hit the thanks button if I have helped you.
MultipleMonomials said:
Try View attachment 1109694. I have never used it but it might work for you.
P.S. Please hit the thanks button if I have helped you.
Click to expand...
Click to collapse
thank you, after looking for this file and only running into broken links yours works and fixed my dear phone, god bless and happy new year 2022
i went from CWM 2.5.1 to your file 4.0.1 which then i was able to flash teamhacksung build and that has a cwm build of 5.5.0.4, then when flashing CWM 11.0 that flashed TWRP 2.6.3.0
Hi,
I want to go from CM7.2 back to a rooted stock rom.
I tried to install two different roms via recovery modus and install zip from sd-card.
But it failed. (showed something like "... is no longer valid")
So i made a journey through google during the last three days.
But I didn't found a page where it is clearly step by step explained.
Seems to be very tricky with the HTC Legend.
Samsung Note was much easier.
I don't want to make something wrong, can some help me with this?
Regards
Michael
You can try a old version of CWM., i think v2.5.0.7 could work.
Hi,
thanks for this.
One Question before I'm going to try it.
If it works and i have a rooted Stock Rom afterwards, can I go back easily to CM7.2 by restoring it with the ROM Manager and the Backup/restore funktion?
Needless to say that I've made a backup before.
regards
Michael
alligator_asl said:
You can try a old version of CWM., i think v2.5.0.7 could work.
Click to expand...
Click to collapse
Hi,
when the Stock Rom is really rooted, then you can go back to CM7.2 or any oher rom. Try B0.8.4 from BlaY0 , it is very stable and has a working GPS.
Hi,
thanks again, because it worked. I just installed a rooted Stock Rom (3.14.161.1 r1 - Stock Froyo ROM for the HTC Legend with Online Kitchen)
with the Rom Manager after I've changed to CWM 2.5.0.7.
So, now I can try out some Roms.
Pretty perfect.
Thx
Regards
Michael
alligator_asl said:
Hi,
when the Stock Rom is really rooted, then you can go back to CM7.2 or any oher rom. Try B0.8.4 from BlaY0 , it is very stable and has a working GPS.
Click to expand...
Click to collapse
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
next time use dsc 1.0 first... usually anything above 1.0 is for people who already tried dsc 1.0 ...
Root issues
josinho00 said:
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem, i think nop is looking into it for us.
Meanwhile nandroided back to v2.0.1
i got mine too..wifi doesnt work so i did nandroid
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
_n0p_ said:
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
Click to expand...
Click to collapse
as a very beginner in android I´m not sure that my answer is really what you are asking,
first I updated my original Froyo to Olleh stock rom via streakmode, as the thread in this forum,....after I updated to DSC 2.0 directly over Olleh gingerbread, without passing by DSC 1.0
It worked great, compared to stock rom wich is a potato,.... but now I´ve losed my paradise :crying::crying::crying::crying:
anyway thanks a lot to nop, I will reinstall 2.0, is a very very very good ROM:laugh::laugh::laugh:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
_n0p_ said:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
Click to expand...
Click to collapse
I used the streakmode, the one that I´ve downloaded from de forum when I updated from froyo to olleh gingerbread, I really dont know anything more now, I´m not at home and can not look for any more
is that what you want to know nop?
thanks a lot
Yes, thank you.
I have root problem with Dsconfig and Dsc cpu voltage.
Sent from my Dell Streak using xda premium
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
_n0p_ said:
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
Click to expand...
Click to collapse
I´ll try the new patch this afternoon
yesterday nigth I reflashed v 2.0 and after 2.0.1, it became to normal .... wifi was all rigtht and DSC apps also were allright.
but "battery counter" did not work properly (it was full charged and showed just 1%) and some apps like "ES file explorer" did not work with root privilegies, I reflashed superuser zip, and after every thing including battery counter were fixed"""
You should always flash updates on full charge, that'll get rid of 1% problem.
_n0p_ said:
You should always flash updates on full charge, that'll get rid of 1% problem.
Click to expand...
Click to collapse
OK, again thanks a lot,
I´m starting with android, comming from iOS ... I´m learning a lot
congratulations for your ROM it´s really fast and stable ... I´m not missing apple´s OS
Hi pro..how can i use fm on dsc 2.1.thanks
Sent from my Dell Streak using Tapatalk 2
Yes.
I've tried to update DSC 1.7 to 2.0 than 2.2, everything is ok.
After flashing updDSCv2.2-PDroid.zip, system hangs on boot animation.
Using nandroid back to 2.2(no PDroid), system is no problem.
How to fix it? Thanks!
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
_n0p_ said:
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
Click to expand...
Click to collapse
Problem solved. Thank you, n0p !
Steps for DSC 2.2 with PDroid
1) Flash DSCv2.0-rel.zip
2) Flash PDroid-v1.31-DSCv2.0.zip
3) Flash updDSCv2.2-PDroid.zip
4) Wipe cache partition, dalvik, fix permissions
5) Reboot
continuing to reboot...
Recently, my phone has been restarted many times. Trying to solve it by reflashing DSC 2.3, but it remains. I flashed the baseband back to 407, it works!
Now it works like a charm but loudly...