as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
next time use dsc 1.0 first... usually anything above 1.0 is for people who already tried dsc 1.0 ...
Root issues
josinho00 said:
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem, i think nop is looking into it for us.
Meanwhile nandroided back to v2.0.1
i got mine too..wifi doesnt work so i did nandroid
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
_n0p_ said:
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
Click to expand...
Click to collapse
as a very beginner in android I´m not sure that my answer is really what you are asking,
first I updated my original Froyo to Olleh stock rom via streakmode, as the thread in this forum,....after I updated to DSC 2.0 directly over Olleh gingerbread, without passing by DSC 1.0
It worked great, compared to stock rom wich is a potato,.... but now I´ve losed my paradise :crying::crying::crying::crying:
anyway thanks a lot to nop, I will reinstall 2.0, is a very very very good ROM:laugh::laugh::laugh:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
_n0p_ said:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
Click to expand...
Click to collapse
I used the streakmode, the one that I´ve downloaded from de forum when I updated from froyo to olleh gingerbread, I really dont know anything more now, I´m not at home and can not look for any more
is that what you want to know nop?
thanks a lot
Yes, thank you.
I have root problem with Dsconfig and Dsc cpu voltage.
Sent from my Dell Streak using xda premium
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
_n0p_ said:
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
Click to expand...
Click to collapse
I´ll try the new patch this afternoon
yesterday nigth I reflashed v 2.0 and after 2.0.1, it became to normal .... wifi was all rigtht and DSC apps also were allright.
but "battery counter" did not work properly (it was full charged and showed just 1%) and some apps like "ES file explorer" did not work with root privilegies, I reflashed superuser zip, and after every thing including battery counter were fixed"""
You should always flash updates on full charge, that'll get rid of 1% problem.
_n0p_ said:
You should always flash updates on full charge, that'll get rid of 1% problem.
Click to expand...
Click to collapse
OK, again thanks a lot,
I´m starting with android, comming from iOS ... I´m learning a lot
congratulations for your ROM it´s really fast and stable ... I´m not missing apple´s OS
Hi pro..how can i use fm on dsc 2.1.thanks
Sent from my Dell Streak using Tapatalk 2
Yes.
I've tried to update DSC 1.7 to 2.0 than 2.2, everything is ok.
After flashing updDSCv2.2-PDroid.zip, system hangs on boot animation.
Using nandroid back to 2.2(no PDroid), system is no problem.
How to fix it? Thanks!
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
_n0p_ said:
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
Click to expand...
Click to collapse
Problem solved. Thank you, n0p !
Steps for DSC 2.2 with PDroid
1) Flash DSCv2.0-rel.zip
2) Flash PDroid-v1.31-DSCv2.0.zip
3) Flash updDSCv2.2-PDroid.zip
4) Wipe cache partition, dalvik, fix permissions
5) Reboot
continuing to reboot...
Recently, my phone has been restarted many times. Trying to solve it by reflashing DSC 2.3, but it remains. I flashed the baseband back to 407, it works!
Now it works like a charm but loudly...
Related
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
aussiesausage said:
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
Click to expand...
Click to collapse
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
I have stock 2.1 + jit - junk apps, and Very nice, i waiting for a 2.3+ camera
Mr Patchy Patch said:
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
Click to expand...
Click to collapse
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
i use this one.....and never had a problem....
aussiesausage said:
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
Click to expand...
Click to collapse
Did u flash the correct baseband?
Mr Patchy Patch said:
Did u flash the correct baseband?
Click to expand...
Click to collapse
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
aussiesausage said:
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
Click to expand...
Click to collapse
What baseband are you on? .54 or .55?
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=945264
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
Eh - have a read, and if you have issues use the "SEARCH" button.
http://forum.xda-developers.com/showthread.php?t=911364
will give it a try but still got to flash my bb xD
@nadiros trust me I read a lot of threads with roms, and the version confused me, when I saw the link i was like "oh, so that one is the rom"
not asking about the link cause i'm lazy
alankstiyo said:
will give it a try but still got to flash my bb xD
Click to expand...
Click to collapse
What baseband are you on??
Try letting the boot screen loop run for a few minutes. I recently reinstalled wolf's CM2.2 again and it looped a good 6 or so times before actually loading up.
Also make sure that you are on the latest firmware, Wolf's rom requires it
EDIT:: lol I don't know why my post was so late.. guess all the questions were answered.
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
aussiesausage said:
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
Click to expand...
Click to collapse
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Mr Patchy Patch said:
What baseband are you on??
Click to expand...
Click to collapse
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Mr Patchy Patch said:
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Click to expand...
Click to collapse
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
aussiesausage said:
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
Click to expand...
Click to collapse
LOL! ok, well im gonna be up for a while, so if your on the same baseband as me I already have all the files on my computer so I can quickly make you a .zip file with all the proper files to flash.
alankstiyo said:
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Click to expand...
Click to collapse
Ok, im on .54 as well and the ROM works awesome. no need to change your baseband to flash that ROM. Just download the proper files.
Hi there. Im having a problem with my x10i. The battery is drained very quickly. I dont have any weird programs running in the background, but when i went to bed i had 97% and when i elke up 67%. Im running wolfbreaks cm with all new updates and BB .54. Any Solutions?
Sent from my X10i using XDA App
Hi,
Give some more details,
On wich ROM are you, official or customised ?
Task killer app ?
Always the same problem with this phone or new problem ?
If you've installed the new custom kernels, then battery drain is normal..also did you do a clean install of the rom? If yes, did you restore the apps and data.?
As I said I'm running wolfbreaks rom. I have already done a fresh installation of the rom. I have restored apps and data using mybackup root. I am not running any costum kernels. Any help is appreciated thanks guys.
Sent from my X10i using XDA App
Wipe dalvik cache and reset battery stats, that could help
There is a known issue, stated on Wolfbreaks thread about the ROM, it says that if you have this problem..
Make a full fresh reinstall of 2.1 trought Sony Ericsson Update Service and then after that my ROM and dont restore your Data in 2.1 or my ROM. Make a fresh install and if thats done you can restore Data with Flashtool Method i described or with MyBackupRoot/Titanium
or read this Thread
Click to expand...
Click to collapse
http://forum.xda-developers.com/show....php?t=1024867
Also check for applications running in the background.
Sent from my HTC Desire using Tapatalk
MrHassell said:
There is a known issue, stated on Wolfbreaks thread about the ROM, it says that if you have this problem..
http://forum.xda-developers.com/show....php?t=1024867
Click to expand...
Click to collapse
Yeah I already did that. But thanks for your help
Sent from my X10i using XDA App
I use the Cyanogen 6.1.3 & have no issues at al, maybe you should callebrate your battery every once in a while!
Have you updated Wolf's ROM to V06? Since I updated the phone is flying! Very fast and smooth and battery seems to last much longer
reflash the phone (or recover using xRecovery) to 2.1
then reboot back to xRecovery, wipe everything in order as written in the instructions.
flash base rom (v05), reboot, login to the market and let it settle.
then install the update v06, flash in the new market, then reboot.
apart from doing the correct steps, it is also important to calibrate your battery, which you can find apps from the market to do so.
hey guyz
sorry to start a new post but i have searched everywhere on this platform and mostly its same solution everywhere so i think i just need some specific steps to do it i guess.
i was on A0435 with baseband .54 which comes with generic rom. then i searched and found out that MIUI 1.0.5 can work on .54 without changing to .49, we just apply cm6bb54.zip patch.
first i did was flashed A0435, ran the phone, rooted, installed xrevocery, then i flashed trip's MIUI 1.0.5 through xrecovery and without rebooting i flashed the patch also. that solved the problem of network connection.
but my major problem is that it keeps bootlooping. i cant get it to stop bootlooping.
i have also tried 10times to flash .49 on it but it wudnt work. i always get unkoen baseband and because of that again MIUI wudnt work.
i need some1 to help me out with steps to do it perfect from whom this ROM is working on x10.
thank you for your time.
worked fine for me....
Did you make sure to full wipe before you flashed the rom?
full wipe/factory restore, wipe cache, then go into advanced and wipe dalvik cache. Then flash the rom, followed by the patch.
yes, i have tried all that and its still bootloop.
try loading it for a minute and letting it settle, then afterwards going back into xrecovery and flashing the patch.
thnx man. but i just found my own way of working this thing out. for any1 who has/had problem like me installing MIUI 1.0.5 on .54..just flash generic A.0.24 which has .49 preinstalled baseband and then just follow normal xrecovery method of flashing the MIUI 1.0.5 and it works perfect.
pinkzwinkz said:
thnx man. but i just found my own way of working this thing out. for any1 who has/had problem like me installing MIUI 1.0.5 on .54..just flash generic A.0.24 which has .49 preinstalled baseband and then just follow normal xrecovery method of flashing the MIUI 1.0.5 and it works perfect.
Click to expand...
Click to collapse
lol or you could just flash the .49 baseband instead of a whole firmware.
The patch worked fine for me and everyone else, judging by this post, I'm assuming it's something you're doing
I'm on SuperClean 2.9.2v. Can I flash Community Rom v1.3 straightaway or should I install 1.0, then 1.2 patch and then flash 1.3? Sorry if it sounds like a noob Q but I couldnt find much information on the progression. I mean, nothing was mentioned in the 1.3 update if it could be flashed as an independent rom or was to be flashed over 1.0.
Thanks.
3dsign said:
I'm on SuperClean 2.9.2v. Can I flash Community Rom v1.3 straightaway or should I install 1.0, then 1.2 patch and then flash 1.3? Sorry if it sounds like a noob Q but I couldnt find much information on the progression. I mean, nothing was mentioned in the 1.3 update if it could be flashed as an independent rom or was to be flashed over 1.0.
Thanks.
Click to expand...
Click to collapse
install 1.0 then 1.3
3dsign said:
I'm on SuperClean 2.9.2v. Can I flash Community Rom v1.3 straightaway or should I install 1.0, then 1.2 patch and then flash 1.3? Sorry if it sounds like a noob Q but I couldnt find much information on the progression. I mean, nothing was mentioned in the 1.3 update if it could be flashed as an independent rom or was to be flashed over 1.0.
Thanks.
Click to expand...
Click to collapse
Just wipe and flash 1.3.
Sent from my SCH-I500 using XDA Premium App
ace5198 said:
install 1.0 then 1.3
Click to expand...
Click to collapse
1.3 is a full rom....not a patch...no need to install previous versions
Thanks ace5198 and nitroglycerine33.
I find both the replies contradicting each other, but I presume wiping data and clearing the caches, and then flashing 1.3 straightaway (like nitroglycerine33 says) should work(?).
Also, I will backup my current rom and settings via CWR. But in case something goes wrong and I need to restore my current rom (SC2.9.2v), what kernel will I have to flash to make things work again? I guess I read somewhere that the nandroid backup doesnt back up the kernel. Please correct me if I'm wrong.
Thanks.
nitsuj17 said:
1.3 is a full rom....not a patch...no need to install previous versions
Click to expand...
Click to collapse
Nitsuj17, your reply came just in time! Thanks for clearing that along with Nitroglycerine33!
PS: If its not too much of a trouble, for beginners it'll be great if it is mentioned in the Changelog (such as 1.3) that it is a full rom and can be flashed straightaway.
3dsign said:
Thanks ace5198 and nitroglycerine33.
I find both the replies contradicting each other, but I presume wiping data and clearing the caches, and then flashing 1.3 straightaway (like nitroglycerine33 says) should work(?).
Also, I will backup my current rom and settings via CWR. But in case something goes wrong and I need to restore my current rom (SC2.9.2v), what kernel will I have to flash to make things work again? I guess I read somewhere that the nandroid backup doesnt back up the kernel. Please correct me if I'm wrong.
Thanks.
Click to expand...
Click to collapse
ok so it is a full rom.. but u could flash any touch wiz kernal for sc2.9.. but u def wont need to revert.. if you havent yet.. you should update ur radio as well
I have a stickied thread in this forum that is the best way to alleviate any potential issues as well as get to the latest radio.
Hi,
I recently installed OVERDRIVE SERIES gingerbread 2.3.4 a2sd/40 languages/stable and now I want to install its MIUI - Formels MIUI gingerbread 2.3.4. as far as I am aware I should install the MIUI via xrecovery. However the xrecovery 0.3 is not to be installed on ROM 2.2 and 2.3....
How am I supposed to access the recovery menu to install the MIUI??
Any help is much appreciated.
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
aR_ChRiS said:
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
Click to expand...
Click to collapse
Just realized that, thanks.
Installing it now.
aR_ChRiS said:
xRecovery is included in custom roms.
But it is advised that you do a clean reinstall of 2.1 then move onto a new custom rom.
Click to expand...
Click to collapse
why the hell would you do that??
You flash 2.1 first every time?
What a waste of time lol
fiscidtox said:
why the hell would you do that??
You flash 2.1 first every time?
What a waste of time lol
Click to expand...
Click to collapse
yeah I'd like to know that too, I've seen some recommending it but I've never done it & I've never had any problem (knock on wood hehe)
so what's the logic here? I want to know?
riginal said:
yeah I'd like to know that too, I've seen some recommending it but I've never done it & I've never had any problem (knock on wood hehe)
so what's the logic here? I want to know?
Click to expand...
Click to collapse
Probably some ritual... superstition maybe
kozxmartt said:
Probably some ritual... superstition maybe
Click to expand...
Click to collapse
It's retarded as long as you have the right baseband or flash a baseband patch and make sure to wipe everything that step would accomplish nothing...