HI all
I've an x10 mini pro @ 2.1u1 with kernel 2.6.29
rooted
JIT enabled
[email protected] by ocx8.ko and setCPU
autokiller memory optimizer set @ optimum
and in attachment there is my score @ quadrant advancd v1.1.6
somebody can explane me why CPU, MEM and 2D are good while I/O and 3D are so low??
how can I improve thats??
ilcugio said:
HI all
I've an x10 mini pro @ 2.1u1 with kernel 2.6.29
rooted
JIT enabled
[email protected] by ocx8.ko and setCPU
autokiller memory optimizer set @ optimum
and in attachment there is my score @ quadrant advancd v1.1.6
somebody can explane me why CPU, MEM and 2D are good while I/O and 3D are so low??
how can I improve thats??
Click to expand...
Click to collapse
First you dont need the autokiller because it interferes with androids native memory optimizer. And also you shouldnt use advance task killer. Try remove those and see what happens.
Cheers,
Evilbarcode.
I've disable JIT and my score little bit better...
androitri said:
I've disable JIT and my score little bit better...
Click to expand...
Click to collapse
In every score or only in I/O and 3d?
evilbarcode said:
First you dont need the autokiller because it interferes with androids native memory optimizer. And also you shouldnt use advance task killer. Try remove those and see what happens.
Cheers,
Evilbarcode.
Click to expand...
Click to collapse
nothing good..
what i can't understand is that I/O and 3d are lower than standard
there must be a reason!! no?
I think the problem is, u are running too much app at background...
try uninstall advanced task killer, it works for me on GinTonic v2.4.2 ROM
remember make your ROM like clean.
I think you just wasting your time trying to improve your 2.1 performance. 2.1 is a turtle
just use 2.3 and you'll double your score (my X10 mini pro get around 1250 on stock 600 MHz)
Also, in my opinion your 3D score is normal, mine running 2.3 also get around 250-300
here is my 691mhz and 729mhz score using Gintonic SE rom for mini pro
need it !!!!
My big x10's 3D score was only +-100 lower than my 2D score.
uses similar adreno200 gpu. i thinks it's due to the mini's float processing being effected.
But that's about averagely what to expect from the x10 mini phone
with gingerDX V17 i get round 1100 Points. With stock SE Android 2.1 i get around 450 Points
now I'm @ MiniCM7 Pro (v.20)
and my mini scored 1250
now I'm happy auhau
Related
I tried asking this in the Megatron-thread but as usual, no answers...
I am a little worried about keeping my phone overclocked at all times, so I was thinking about downloading SetCPU and switching between 600 and 700 via that app. But my question is this: Megatron ROM overclocks the phone by default. If I download a 3rd-party app to overclock/underclock the phone, will this mess up the whole system?
Anyone? Would really appreciate help!
i've been using megatron & setcpu together for the past month.. no issues yet, so cant promise ma phone wont go up in flames i clock extra if needed
Ok, thanks!
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
sarfaraz1989 said:
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
Click to expand...
Click to collapse
How do I disable the OC in Megatron? By adding the "minitron" file and then using SetCPU?
Hi all,
I'm a newbie in Android world. Successfully flashed my O1 to Megatron v1. Afterwhich I tried installing SetCPU to it and overclock to 806mhz & above. However, after overclocking with SetCPU, the whole phone's performance became more sluggish than the original Megatron 729mhz...
Someone please advise me on how to overcome this and make the phone speedier with high frequency.
Is there a way to edit some of Megatron's kernel to make it 806mhz on default even without using SetCPU?
Don't use set on boot feature, it will make ur phone get stock on bootloop...
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
ccdreadcc said:
Don't use set on boot feature, it will make ur phone get stock on bootloop...
Click to expand...
Click to collapse
Got it! Tried last night without set on boot feature. Working fine with 806mhz and speedier than 729mhz. However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card? I'm still using the original 2gb microsd card tt came together with the O1... Will changing to a class 6 or higher microsd card let me clock higher? or my chipset is just lemon at 806mhz?
FnH84 said:
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
Click to expand...
Click to collapse
FnH84: I downloaded SetCPU from XDA forum and can tweak the frequency between 600 & 700 by myself. Even can set profiles to govern the speed at different situations.
taeivon said:
However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card?
Click to expand...
Click to collapse
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
How come Samsung Galaxy Mini running on the same chipset offer 800Mhz as stock???
Man, I don't know! How come the same "Pentium IV" processor could come in speeds from 1.3 GHz to 3.8 GHz?
Can any of you actually believe that LG would underclock an 800 MHz CPU and sell it to us as a 600 MHz instead of letting it run at its best?
Galaxy Mini is obviously using a CPU designed to run at 800 MHz, even though it bears the same name. And that one can probably be overclocked to above 1 GHz.
masteryx said:
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
Click to expand...
Click to collapse
Thanks for your reply. I was thinking bout the same as the other guy, that galaxy ace can run at 800mhz, and why not O1.
Hmm... Isn't there any other ways to push the frequency higher? Maybe supply more voltage to the core? I dont mind sacrificing batt life, I just wanna try ways to push it to the max~~
is there someone who can make the kernel with the default set of 1.2 GHz overclock?
I don't know about kernels but yes if you want to get max performance by keeping clock speed at stock then you should try 'Rom Tool Box Pro'
In that use cpu slider in performance tab
I have tested it on xperia mini pro and it increased my quadrent scode by 2500 aproximately
neroyoung said:
I don't know about kernels but yes if you want to get max performance by keeping clock speed at stock then you should try 'Rom Tool Box Pro'
In that use cpu slider in performance tab
I have tested it on xperia mini pro and it increased my quadrent scode by 2500 aproximately
Click to expand...
Click to collapse
ok thank's for info !
my mini pro was working up to 1,8 ghz with "nofrills cpu",
but i'm waiting for a non battery eating kernel
dzsemx said:
my mini pro was working up to 1,8 ghz with "nofrills cpu",
but i'm waiting for a non battery eating kernel
Click to expand...
Click to collapse
same to me, waiting OC for 1.2 mhz stable kernel and no more batteray drain
In what does overclock depends?, I've overclocked my X10 at 1.1 GHZ, but I've seen people on this forum that run theirs at 1.2, mine starts a bootloop with those frequencies, Why? Why does this happen if they are all the same device?...
Same devices,but some chips have better OC potential than others,like CPUs on PCs.
Sent from my xperia "z10i"
The CPU just unstable with it operate at such high frequency.
You have two options
a)Set it at lower frequency
b)Tune up the voltage of CPU at that frequency
(!It may damage your phone,read every words in the program and make sure you know what you are doing!)
I run my phone at 1.2ghz but I don't see the difference since Sony Ericsson cheaped out with a shtty small ram
Sent from my SO-01C using xda premium
My advise is not to overclock it. You can show off in front of your friends. But why risk your x10. Many x10 have capacity to go till 1.2GHZ.
They have some 2010 versions while some are 2011.
ynkamat said:
My advise is not to overclock it. You can show off in front of your friends. But why risk your x10. Many x10 have capacity to go till 1.2GHZ.
They have some 2010 versions while some are 2011.
Click to expand...
Click to collapse
its not that big a risk, overclocking it makes a big difference, I run mine at 1.2ghz and there's an increase in performance in everything I do.
pages load faster, games run much better, videos/music play better and faster.
its not showing of to make your hardware faster.
trojan92 said:
its not that big a risk, overclocking it makes a big difference, I run mine at 1.2ghz and there's an increase in performance in everything I do.
pages load faster, games run much better, videos/music play better and faster.
its not showing of to make your hardware faster.
Click to expand...
Click to collapse
Thats very true, i run my phone at around 500mhz-1198mhz ,smartass very smooth
MattyOnXperiaX10 said:
I run my phone at 1.2ghz but I don't see the difference since Sony Ericsson cheaped out with a shtty small ram
Sent from my SO-01C using xda premium
Click to expand...
Click to collapse
That true
It just can't be "real" multitasking
cpu hot ..... dei..
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Every CPU is different, some can handle 1.4, some can 1.6 and some can't even 1.3GHz.
I've been using 1.4GHz max and 400GHz min, and I get about 4700 in Quadrant, and I reduced homebutton lag to minimum. Some can't see difference between 1.4 and 1.2 and some can (like me). Works just fine.
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
well overclocking or undervolting ur device is not recomended for daily usage as they r done only to do some benchmark tests
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
The higher the min frequency is the higher the chance something will go wrong.. Ie overheat, reboots
Sent from my GT-P7510 using xda premium
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
1.4 will be fine ;-)
I've overclocked all my previous androids & never had issue
OT: I was surprised that a stock 1.2Ghz ph can't go higher than 1.6!?
my moto defy is b/l locked 800Mhz @ stock & I run it @ 1.2Ghz w/o probs. 50% increase... SGS-II should be able to do 1.8Ghz on that math
Moderators, please close/hide/delete this thread, as we have to create new one in the future, this just breaking some rules, thanks to wedgess for information.
KERNEL VERSIONS
Nominal
720P Recording
1.6GHz Max Clock
4MB VRAM
383MB Available Ram
Stock GPU Clock (245 MHz)
Balance
480P Recording
2GHz Max Clock
6MB VRAM
400MB Available Ram
Stock GPU Clock (245 MHz)
Fast
480P Recording
2GHz Max Clock
8MB VRAM
398MB Available Ram
Overclocked GPU (260MHz)
Extreme
No Camera Features
2.3GHz Max Clock
8MB VRAM
429MB Available Ram
Overclocked GPU (265 MHz )
Eagerly awaiting the R800x GB version! Thanks much for your efforts!
Are this for hardcore gamers???
There will be correct version which fits DiXperia Perennial in the future .
Sent from my Xperia X10i using xda premium
Can't wait for jb version and would it be possible to disable als from the kernel level because it causes me lots of problems. If it isn't too much trouble please make version disabling als. Thanks
Sent from my Xperia Play (r800x)
extremetempz said:
KERNEL VERSIONS
Nominal
720P Recording
1.6GHz Max Clock
4MB VRAM
383MB Available Ram
Stock GPU Clock (245 MHz)
Balance
480P Recording
2GHz Max Clock
6MB VRAM
395MB Available Ram
Stock GPU Clock (245 MHz)
Extreme
No Camera Features
2.3GHz Max Clock
8MB VRAM
419MB Available Ram
Overclocked GPU (260 MHz )
Click to expand...
Click to collapse
Is it possible to get say Extreme with 420p recording? I know it would lose some of its RAM... just curious. The thoguht of 8mb vram and gpu OC to 260mhz sounds appealing to me. But I would like to have 420p camera. If not I totally understand. Just curious is all
Saw the FAST options added. Oh man.... just made my day. Awesome. Just to clarify/confirm there will be different version for GB & ICS/JB correct?
Sent from my R800i using xda premium
ozzmanj1 said:
Saw the FAST options added. Oh man.... just made my day. Awesome. Just to clarify/confirm there will be different version for GB & ICS/JB correct?
Sent from my R800i using xda premium
Click to expand...
Click to collapse
eventually there will be but for now I'm polishing off gingerbread
i m only posting here cause of this: is really safe OC at 2.3ghz? i have a feeling many chips gonna be burned..as Doomlord himself said on Doomkernel thread,its more safe using cpu near to default..and he doesnt recommend using cpu above 1.6..wedgess and cosmic dan same opinions..so i think it would be good for all, a release with a bit more juice on GPU..mostly on ICS we need a boost. on GB with adrenobooster we already have an amazing result on roms and daily use. 1ghz--»2.3 seems..xtreme.
just my 2 cents beeing carefull..anyway great work,highly appreciated..and a little question: are JB kernel being thought?:good:
That was Justin's decision - you can always flash Extreme version and use 1.6GHz frequency . If you want my opinion about this, check DiXperia thread where I post my few words of using right frequency with right profile etc.
For example, my XPlay could reach 1.9GHz max, sometimes 2.0, but never more. Some devices, like Justin's Play, working on 2.3GHz better than 2.1, cause of voltages for each frequency .
i totally agree with you..but cutting a bit more frequencies it would not be bad at all..i ve said that on other thread, as i has a xtreme OC on desktop pc..i always be carefull, cause some chips yeh..they handle it..in same cpu/gpu series,same can do it nicely (always short time using) others cant..on long term result they might cause some graphics glithces,cpu faulty and so on..but it always depend on users choice to OC or not,cause a phone doesnt have a refrigeration system as pc can have to reduce temperatures and avoid burning chip.
More than the CPU, the GPU overclock seems really unsafe: doom has tried it still 2 years ago into one version of his kernel (I don't remember which release) and it only gives problem (if I remember correct one guy hasd his play death after some test), maybe is better to ask to doom some more information (he is busy with other devices but I think that he would reply with some more details)
Sent from my Nexus 7 using Tapatalk 4 Beta
[email protected] said:
More than the CPU, the GPU overclock seems really unsafe: doom has tried it still 2 years ago into one version of his kernel (I don't remember which release) and it only gives problem (if I remember correct one guy hasd his play death after some test), maybe is better to ask to doom some more information (he is busy with other devices but I think that he would reply with some more details)
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I agree with the GPU overclock thing and it was v13 he had it ,then he removed it and made v14, So @extremetempz i think you should PM DoomLord and ask!
Pizza_Dox said:
I agree with the GPU overclock thing and it was v13 he had it ,then he removed it and made v14, So @extremetempz i think you should PM DoomLord and ask!
Click to expand...
Click to collapse
and ask him wich clock he used..250 i think it would not be harmful..but Doomlord can say better at wich clocks did he use both GPU/CPU.
i remember to read that one guy also burned his play with 2.0ghz..cant remember wich version of Doomlord kernel,.heated so much that board died.:crying: of course always users choice and fault..cant have a fiat punto racing like a ferrari.
smokerman said:
and ask him wich clock he used..250 i think it would not be harmful..but Doomlord can say better at wich clocks did he use both GPU/CPU.
i remember to read that one guy also burned his play with 2.0ghz..cant remember wich version of Doomlord kernel,.heated so much that board died.:crying: of course always users choice and fault..cant have a fiat punto racing like a ferrari.
Click to expand...
Click to collapse
I have a gilera runner pm tuning,pro street 3!!!
Sent from my R800i using xda app-developers app
Good
This looks very good! Very promising , can't wait to give the monster 2.3ghz a try ) . Anyway good luck with this !
How much ram would removing the 3g function give?
Spatinator said:
How much ram would removing the 3g function give?
Click to expand...
Click to collapse
(correct me if im wrong) i think 3G and Data dosent have a Ram Partition,
Pizza_Dox said:
(correct me if im wrong) i think 3G and Data dosent have a Ram Partition,
Click to expand...
Click to collapse
Ha i don't know it either