Related
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Butch1326 said:
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Click to expand...
Click to collapse
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
powercrazy said:
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
Click to expand...
Click to collapse
I have my routers on the 2.4GHz band setup for Wireless-N only, and my Gtab connects to them just fine. Both on my E4200 and my WRT610N.
powercrazy said:
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
Click to expand...
Click to collapse
Yeah, I only see 72Mbit/second, but someone else reported that they saw 270 Mbit/second connecting to their Netgear router.
I agree with you. I haven't seen the throughput, especially during large file transfers.
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
tcoker79 said:
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
Click to expand...
Click to collapse
N doesnt specify any frequency.
True but when anyone sets up a wireless N router on the 5GHz band only...it will not be found by the G-Tablet. I have mine set up with both 2.4GHz and 5GHz so all of my equipment is covered.
I'm using the WRT310N and I have mine set to Wireless N only.
Standard 20MHz Channel @ 2.412GHz
GTAB Connects.
Hell, if you live in an area where you can use all 14 2.4GHz channels you can even connect on channel 14. A lot less interference.
My gTab can see my N-network but it disconnect immideatly after I try to connect. I have 2 routers; 1 upstairs with N only, an done downstairs with both N & G. I'm mostly upstairs but I have to connect to the G-router which only gives me one bar.. But it works just fine, although full speed N would have been nice for Winamp Wifi-sync and transfering Movies etc
Mine connects to DLink Dir655 2.4Ghz rounter using N protocol but gTab radio definitely not a MIMO one.
Best download speed is about 2.7 - 3.0 MByte per second when using FTP, and only 1.9 - 2.0 MByte per second when using SMB protocol.
My laptop can get upload/download speeds around 9-10 MByte per second using same router and 2.4Ghz MIMO N wireless card.
The phone says its wireless N able but I can't seem to get it to see my wireless N network over 5GHz. It sees my wireless G network over 2.4GHz fine but not wireless N over 5GHz evidently.
Anyone gotten theirs to connect to N networks? If so what were your configs for channel, and all that if you mind me asking?
I haven't had any issue connecting to wireless n. I'm connected at home, girlfriends and work. My router is channel 11, gf is channel 6. I don't know about work.
Night·Fire said:
I haven't had any issue connecting to wireless n. I'm connected at home, girlfriends and work. My router is channel 11, gf is channel 6. I don't know about work.
Click to expand...
Click to collapse
If your on channel 11 then your only on 2.5GHz not 5GHz. do me a favor and while your connected on your Evo3D go into wireless settings and click on the network that your connected to and tell me the speed it shows. Willing to bet its only 65Mbps, which is because your on 2.5GHz and not 5GHz.
sgt. slaughter said:
The phone says its wireless N able but I can't seem to get it to see my wireless N network over 5GHz. It sees my wireless G network over 2.4GHz fine but not wireless N over 5GHz evidently.
Anyone gotten theirs to connect to N networks? If so what were your configs for channel, and all that if you mind me asking?
Click to expand...
Click to collapse
There is a difference between A/N and B/N.
B/N is 150Mbs + and has better penetration than A/N. You're asking the wrong question.
Yes, you can connect to a B/G/N network. No you cannot connect to a 5.0GHz anything network.
NoSoMo said:
There is a difference between A/N and B/N.
B/N is 150Mbs + and has better penetration than A/N. You're asking the wrong question.
Yes, you can connect to a B/G/N network. No you cannot connect to a 5.0GHz anything network.
Click to expand...
Click to collapse
So this has a single antennae then correct just like the Evo4G did which is why it couldn't connect to 5.0GHz networks?
j/w b/c I can't get past 65Mbps on the connection while I thought the 3D had a better wireless card in it than the 4G. Its not my router as I get boost up to 130Mbps on my laptop connected to same SSID at times.
Just a bummer thought we were getting a true wireless N capable phone.
This makes me wonder even more why they took out N capability in the Evo4G update and never added N to the spec sheet.
A single antenna is not what makes it 2.4GHz vs 5GHz. The single antenna basically limits it to Wireless N, 150Mbps vs 300Mbps. The 5GHz is just the frequency that it travels over, and most mobile devices won't do 5Ghz, and will only have a single antenna.
simpat1zq said:
A single antenna is not what makes it 2.4GHz vs 5GHz. The single antenna basically limits it to Wireless N, 150Mbps vs 300Mbps. The 5GHz is just the frequency that it travels over, and most mobile devices won't do 5Ghz, and will only have a single antenna.
Click to expand...
Click to collapse
So your able to connect over 2.4GHz freq and your evo3d shows its connected at 150Mbps??
I have a top of line netgear full dual band router here so I know its not that, esp seeing as my pc connects at 150Mbps over the 2.4GHz band. I'm checking this by just clicking on the SSID after connected on the Evo3D, or checking Status on my PC's connection.
Dont get why I'm always showing 65Mbps on the Evo3D. Would of thought that since they are publishing that they support Wireless N as opposed to the Evo4G who only had 1 antennae, that I would connect at higher speed than the Evo4G. did
sgt. slaughter said:
So your able to connect over 2.4GHz freq and your evo3d shows its connected at 150Mbps??
I have a top of line netgear full dual band router here so I know its not that, esp seeing as my pc connects at 150Mbps over the 2.4GHz band. I'm checking this by just clicking on the SSID after connected on the Evo3D, or checking Status on my PC's connection.
Dont get why I'm always showing 65Mbps on the Evo3D. Would of thought that since they are publishing that they support Wireless N as opposed to the Evo4G who only had 1 antennae, that I would connect at higher speed than the Evo4G. did
Click to expand...
Click to collapse
There's nothing more misleading than the whole "link speed". I've never seen an actual 150Mbs off of my A/N "300Mbs" connection, and that's with the laptop sitting 4ft from the router. The phone can't utilize anywhere near that bandwidth, and I'm willing to bet that even if your internet is several MB/s, you won't actually find a website to give you more than 1.2MB/s. Microsoft is one of the few that I know of that can really dish the data out.....but how often are you downloading massive updates?
NoSoMo said:
There's nothing more misleading than the whole "link speed". I've never seen an actual 150Mbs off of my A/N "300Mbs" connection, and that's with the laptop sitting 4ft from the router. The phone can't utilize anywhere near that bandwidth, and I'm willing to bet that even if your internet is several MB/s, you won't actually find a website to give you more than 1.2MB/s. Microsoft is one of the few that I know of that can really dish the data out.....but how often are you downloading massive updates?
Click to expand...
Click to collapse
Not concerned with internet speed and more so looking at my internal network speeds for file transfers and such.
I get that it can be missleading but do not get that if the Evo4G which has a less powerful card than the 3D evidently that the 4G and 3D show the same link speeds.
I prob need to check the specs on each phones card really though the more i think about it b/c most i have been going off of is word of mouth like the 4G only having 1 antennae and such. No clue if the 3D has 2 or not.
sgt. slaughter said:
Not concerned with internet speed and more so looking at my internal network speeds for file transfers and such.
I get that it can be missleading but do not get that if the Evo4G which has a less powerful card than the 3D evidently that the 4G and 3D show the same link speeds.
I prob need to check the specs on each phones card really though the more i think about it b/c most i have been going off of is word of mouth like the 4G only having 1 antennae and such. No clue if the 3D has 2 or not.
Click to expand...
Click to collapse
You'll probably find that the WiFi and BlueTooth antenna are shared....and if a phone has an FM rx, it too will use that antenna. Not likely to find a cellular with dual WLAN antennas.....they're not really built to be a dedicated WIFI anything.
If you're concerned about xfer rates on the phone, yank the SD card out and put it in a reader. That's the fastest way to get data to the phone, followed by hooking up the phone via USB. The phone has no use for WLAN data rates above 15Mb/s. If you're transferring movie files, use the USB connection method. Outside of that, don't sweat it. I honestly couldn't see someone moving GBs worth of data on a constant basis with the phone.....and if you are, sounds like you should look at something with larger storage like a Tablet PC.
NoSoMo said:
You'll probably find that the WiFi and BlueTooth antenna are shared....and if a phone has an FM rx, it too will use that antenna. Not likely to find a cellular with dual WLAN antennas.....they're not really built to be a dedicated WIFI anything.
If you're concerned about xfer rates on the phone, yank the SD card out and put it in a reader. That's the fastest way to get data to the phone, followed by hooking up the phone via USB. The phone has no use for WLAN data rates above 15Mb/s. If you're transferring movie files, use the USB connection method. Outside of that, don't sweat it. I honestly couldn't see someone moving GBs worth of data on a constant basis with the phone.....and if you are, sounds like you should look at something with larger storage like a Tablet PC.
Click to expand...
Click to collapse
I hear ya im aware of outside options. I just thought that since this phone is supporting wireless N fully then the link speeds would be able to be higher than the link speed on the 4G.
But again like i said before i really need to get down to it and look at the documentation of the chips used on the 4G and 3D to see what differences there are.
EDIT:
NVM makes sense now. both phones have the same Broadcom chip inside. the Broadcom BCM4329.
BUT whats odd is that from what i read that chip only supports bluetooth 2.1 while we supposedly have 3.0 on this phone. Also interesting is the chip supports 5GHz dual band. here
I don't think my 3D has connected to 5GHz on my home network. I have a dual-band N router, and I have 5GHz as the primary, so my laptop and media player connect to that immediately.
I only noticed my 3D on the 2.4GHz part of my network. I haven't tried manually connecting it to the 5GHz band, but if it could, I would have assumed that it would automatically.
sgt. slaughter said:
EDIT:
NVM makes sense now. both phones have the same Broadcom chip inside. the Broadcom BCM4329.
BUT whats odd is that from what i read that chip only supports bluetooth 2.1 while we supposedly have 3.0 on this phone. Also interesting is the chip supports 5GHz dual band. here
Click to expand...
Click to collapse
Well, when it comes to "N", there are several factors that come into play. One, the wireless chip MAY be able to support the A frequencies, you're talking about additional code to make it work with rest of the phone. Antenna isn't an issue since 2.4 is half of 5.0. A 1/2 wavelength 2.4GHz antenna, is about a full length 5GHz antenna if memory serves me correctly (that and the 36hrs I've been up). Another thing that comes into play as far as the bandwidth is concerned is channel width. There is also MIMO too....but the phones will be basic of basic. The fact that N support is enabled is surprising, but it's most likely just a selling point. It supports the most basic N, with the smallest channel width, and clearly MIMO isn't supported. Routers can be configured to B or G or N only, sometimes combos of them as well. I use DDWRT on my routers and it allows virtually everything to be manipulated. Either way though, there is a lot of features to cram into the small area that is the cellphone, and if you ever take a look at a full featured ABGN mini pci-e WLAN card, you will see that there is still a decent size to it when all the features are present.
Ok, I think that's about all I can add to the topic, LOL
N is the technology that delivers faster then G speeds using MIMO packets.
A is the technology that frees up the crowding of B/G Networks by running on 5GHZ as opposed to 2.4GHZ
BGN Refers to a 2.4GHZ spectrum capable of running the N packets.
ABG Refers to a 2.4GHZ or 5GHZ spectrum capable of running the B/G packets.
ABGN Refers to a 2.4GHZ or 5GHZ spectrum capable of running BGN packets.
It's retarded how they label it. LOL but you can run N on 2.4 spectrum or 5GHZ spectrum.
Most mobile devices only see 2.4GHZ spectrum since they only have one antenna.
darkflame said:
N is the technology that delivers faster then G speeds using MIMO packets.
A is the technology that frees up the crowding of B/G Networks by running on 5GHZ as opposed to 2.4GHZ
BGN Refers to a 2.4GHZ spectrum capable of running the N packets.
ABG Refers to a 2.4GHZ or 5GHZ spectrum capable of running the B/G packets.
ABGN Refers to a 2.4GHZ or 5GHZ spectrum capable of running BGN packets.
It's retarded how they label it. LOL but you can run N on 2.4 spectrum or 5GHZ spectrum.
Most mobile devices only see 2.4GHZ spectrum since they only have one antenna.
Click to expand...
Click to collapse
Actually, abg means that it can use the 802.11a, 802.11b, or the 802.11g standard, and abgn adds 802.11n. 802.11A is a very different standard than N, and is incompatible with the others, whereas B, G, and N are forwards and backwards compatible, except for N going over a 5Ghz signal, which still isn't compatible with A.
All that said, I'm pretty sure that this phone will only support 802.11n over 2.4GHz at 150Mbps. I don't have the phone yet, but I'm basing this off the fact that nearly all portable devices that use 802.11n are that way. At least I haven't seen one that is capable of either using 5GHz, or 300Mbps.
My EVO 3D does NOT see my 5 GHz N network.
ZachPA said:
My EVO 3D does NOT see my 5 GHz N network.
Click to expand...
Click to collapse
I have the exact same issue. My laptop sees my 5ghz ssid, but my MT4G doesn't. The weird thing is, I've flashed several ROMS to my phone, and none see it. I did however, flash the stock ROM (froyo 2.2.1) today for the sh*ts and giggles of it, and it saw the N ssid! WTF.
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
i thought wifi was only 2.4ghz on this phone. my 5ghz network doesnt even show on my phone.
5ghz seems to be working fine for me
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
grad20_09 said:
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
Click to expand...
Click to collapse
I have been able to use channels 140 and 149 as well as 36. What I did notice is that the first time I connect to (the very first time or if I make a change to the router) the wifi signal will drop and start several times.....I find if I just turn off wifi and turn it back on and reconnect it will hold.
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
dagnasty said:
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Hmmm...mine is set to N only...being its the only device on my 5G connection.
Yea, the only thing on mine is my other router setup as a bridge for my downstairs. I guess ill leave it since its working
Sent from my EVO using XDA
I've got an apple airport extreme. my evo connects just fine on 5ghz
I have a Cisco ISR wireless router and I use strictly 5Ghz. It's wireless-A, not wireless-N, but it's strictly 5Ghz and it scan and uses whatever channel it wants. No issues so far.
I tried N network a while ago on my older phones (not 5Ghz N) and noticed more battery drain VS G. Since then I have switched my N to 5Ghz and just use my ipad3 for it. My phone I keep on G network. I don't see any real point to having it on a N network. G I still pull 10+ megabits down which is more than enough for pretty much anything the phone can do. Not really worth the extra battery drain in my opinion. My ipad I like on higher speed since I stream MKV files but the phone I think is pointless at least for me.
Sprint HTC Evo 4G LTE 5Ghz WiFi
dagnasty said:
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
Click to expand...
Click to collapse
I actually had the exact same problem as you mentioned. The one thing I wanted to add to your excellent description of problem symptoms is that it says "Authenticating", and that is when it drops the signal to -1Mbps. Something during the authentication process seems to kill the radio connectivity. This has not happened on any of my other 802.11n devices. It connects fine on the same router's 802.11g. I had no issues with my previous phone (Samsung Epic Galaxy S).
Interestingly my router is a different brand but perhaps it shares some similar chipset. My equipment as follows:
Bone stock Sprint HTC Evo 4g LTE (on Ice Cream Sandwich, duhh)
Belkin Play N600 HD Wireless Dual-Band N+ Router (F7D8301 v1)
After reading the other posts here it inspired me to play with my Router configs for 802.11N. Turns out after making some adjustments I was able to get connected.
-I had the following selected:
Wireless Channel: Auto
Extension Channel: 40 (grayed out)
Wireless Mode: 802.11a&n -Worked after changed to 802.11n
Bandwidth: 20/40MHz
Protected Mode: OFF -Worked after changed to On
802.11e/WMM QoS: On
I honestly think it was the Protected Mode that made the difference. Here is what the router help page says about that feature: Protected Mode
NOTE: In most situations, best performance (throughput) is achieved with Protected Mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected Mode ON.
So long story short, try turning Protected Mode ON in your 802.11n configs first and see if that gets it going for you. Hope that helps!
P.S. After changes above I ran some Speedtest.net for Android tests (back to back) and got the following from the next room over (about 20 feet from router):
Test 1: On 802.11n: 17024kbps down, 5857kbps up, 27ms ping
Test 2: On 802.11n: 18134kbps down, 6266kbps up, 39ms ping
Test 3: On 802.11g: 15385kbps down, 6091kbps up, 25ms ping
Test 4: On 802.11g: 22212kbps down, 5785kbps up, 43ms ping
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
kevinrstruck said:
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
Click to expand...
Click to collapse
What router do you have? Also what kind of connection speed are you getting?
I checked freq and it was on auto, tried just 5ghz, also tried Best wifi but it still cant connect to the internet. I gets a connection with the router according to the phone but my 6300 doesnt show it as a connected device.
no problem here i can connect to my 5Ghz network with my a/n capable Time Capsule router. speeds are 55..27 Mbps download / 35.95 Mbps upload. my One wifi settings are set to Auto (vs. setting to 2.5 or 5 Ghz).
I have a Netgear WNDR4500. Speeds are 40 Mbps down and 28 Mbps up. That is with the router 2 floors above me in my house. My settings are also set to "Auto" as well. I connected immediately when I got home on Thursday after getting the device. I have had no problems at all with WiFi. Sorry I cannot be of more assistance.
I have no problem when connecting to my R6300 in AC mode ...
mine connects just fine
No connection at 5ghz, can only connect at 2ghz
I have d-link dr-825 rev B router with [DD-WRT v24-sp2 (04/01/13) std - build 21153] firmware. It has dual 2ghz and 5ghz radios.
I can only connect at 2ghz and unable to connect at 5ghz.
I have a dell latitude laptop and my old Galaxy SII has no problem connecting.
Howvever Htc-One lists the access point, correctly determines what kind of security is on (like wpa/wpa2 etc) but is unable to connect. I think once I saw a brief flash saying authentication failure on my phone when trying to connect to 5ghz. So I removed all security and made it completely open just to try. Again no connection without any error.
I am thinking of returning it if it is going to be a problem.
---------- Post added at 12:17 PM ---------- Previous post was at 11:40 AM ----------
Ok, I have solved the problem, now it is connecting. I made two changes in the wirless setup. Enable RTS/CTS protection and also enabled short preamble. After these two changes it is connecting as expected.
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
I'm having the same issue with mine and the same router, can not quiet figure out what is going on.
Just quick update i just did an update on my router and it seems to connect completely fine
For those who have router issues, check for a firmware update! Most routers have a few updates while sitting on the shelf. I used to always update and properly configure routers (with out the software disc) for customers at my old job and we rarely had problems of customers bribing it back. And throw out the disc that comes with the router. The software can cause headaches down the road. All security settings can be done inside the router through any web browser and router IP.
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Connects to my linksys ea6500 5ghz ac just fine link speed around 400 mbps
Sent from my HTC One using XDA Premium HD app
Added an Airport Express, and 5ghz works fine from that...
cq_ said:
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Click to expand...
Click to collapse
Prefers 2.4
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
Correct. The 2.4 GHz network should travel further. Its all about that sweet sweet 5 GHz speed though! Mine connects to my Asus RT-AC66U router just fine.
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
no preferred option?
godfirst said:
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
doxy-LS said:
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
Click to expand...
Click to collapse
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
godfirst said:
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Well I want to be able to use the 2.4 GHz networks when available, so I'll leave it on auto. I guess the speed isn't a huge deal when the wireless connection is so much faster than my internet connection.
And yes, I know that there are lots of differences between stock & custom ROMs (my last phone was a Nexus S & I was always changing ROMs). What I meant to ask was if there was a difference with that specific option.
wifi 2.4GHz connection problems
Welcome
I have silver One for 3 weeks now, but it was 2 weeks in service - they reinstalled software and returned phone. No change.
I can't connect to any 2.4 Ghz network (G/N) ending Authentication Error. Only 5GHz works.
I tried it with Netgreat WNDR4700 (Gargoyle custom software), CISCO access point @ work, also random WiFi open networks in shops/malls, etc. Other devices i know and have at home ( Samsung Note II, htc Sensation, Acer Iconia tab, Dell Latitude laptop) works fine. Just the One cosing problems.
I run stock rom, how can I turn on more verbose logging or see what is happening in the Operation system while connecting? I must prove to Regenersis Poland service that my phone does not work. Otherwise they will say phone works within parameters.
Just got my Nexus 9 today from Google Play store UK. Everything seems working ok, except:
I cannot find any wifi 5GHz. I am connecting to my home 5GHz (Virgin Media Superhub) from my HP Pavillion laptop, MBP, iPhone and iPad. But on Nexus 9, I am not able to scan any 5GHz network:
2.4Ghz works fine though:
I have enabled all possible channels in Settings (Wifi Analyzer):
In system Settings, I have tried both Automatic and 5GHz only:
I have performed OTA updated after first time switched on device and connected to 2.4GHz network at work, didn't notice whether there was an issue on 5GHz until I got home.
So, is there a problem with the latest OTA, or simple this unit needs to be RMA?
BR/Richard
Hi
richardman said:
Just got my Nexus 9 today from Google Play store UK. Everything seems working ok, except:
I cannot find any wifi 5GHz. I am connecting to my home 5GHz (Virgin Media Superhub) from my HP Pavillion laptop, MBP, iPhone and iPad. But on Nexus 9, I am not able to scan any 5GHz network:
2.4Ghz works fine though:
I have enabled all possible channels in Settings (Wifi Analyzer):
In system Settings, I have tried both Automatic and 5GHz only:
I have performed OTA updated after first time switched on device and connected to 2.4GHz network at work, didn't notice whether there was an issue on 5GHz until I got home.
So, is there a problem with the latest OTA, or simple this unit needs to be RMA?
BR/Richard
Click to expand...
Click to collapse
Mobile devices don't always support all the 5GHz channels that an access point might use. Try setting the Access point to use the lowest channel, say 36 and see if that works?
Regards
Phil
PhilipL said:
Hi
Mobile devices don't always support all the 5GHz channels that an access point might use. Try setting the Access point to use the lowest channel, say 36 and see if that works?
Regards
Phil
Click to expand...
Click to collapse
Hi Phil
Thanks for the hint. It looks like Nexus 9 only able to see channel 34 ~ 48. My broadband AP has selection of 36 ~ 136, and it was on "Auto Performance" and auto selected channel 100 tonight.
Thanks Phil!
BR/Richard
Yeah.. Only 34-48 Weird why it doesn't support more than that.
Hi
Steffe89 said:
Yeah.. Only 34-48 Weird why it doesn't support more than that.
Click to expand...
Click to collapse
Different countries have different requirements, but often most countries only allow certain frequencies to be used outside, and other frequencies for 5GHz may only be used inside buildings to prevent interference to radar etc.
A mobile device can of course be used outside, so can end up only being setup to use much fewer frequencies than a router designed for indoor use.
Sometimes the router isn't set to the right country, so ends up using frequencies it shouldn't really be using with the mobile device correctly set so ignoring those frequencies or the other way around. 5GHz is a lot more complex for what frequencies can and can not be used, see here http://en.wikipedia.org/wiki/List_of_WLAN_channels and the chart at the bottom, you'll understand why 5GHz devices sometimes don't see each other, it's a lot more confusing than 2.4GHz.
Regards
Phil
Using 5ghz wifi
Hi
To use 5ghz have you tried configuring from WIFI from settings - tapping the three dots next to the magnifying glass - Advanced - WIFI Frequency band.
It gives you the option of selecting 2.4 or 5 or both.
Ron..
PhilipL said:
Hi
Mobile devices don't always support all the 5GHz channels that an access point might use. Try setting the Access point to use the lowest channel, say 36 and see if that works?
Regards
Phil
Click to expand...
Click to collapse
i had the same problem! Thank you so much for the fix!
You should be able to use channels 149-161 as well, it's the channels in between that are set aside for DFS and radar, so many devices don't support them.
Working fine for me on Channel 153 with a Nighthawk R7000.
Sent from my Nexus 9 using Tapatalk
its suposed to work check if your router router chanel are setup correctly
Got mine to connected on the Virgin Media Superhub by changing the channels as suggested. Can confirm it works but very unstable and keeps dropping connection.
I got the same problem.
I got the same problem! I bought my N9 on Nov 11 and used 5GHz without problem until today. In the WiFi Analyzer suddenly can show 2.4GHz only. I have reboot and clear all WiFi App cache & data., still cannot show.
Even connect to 2.4GHz, it took long time to Connect and Authenticate the connection.
richardman said:
Just got my Nexus 9 today from Google Play store UK. Everything seems working ok, except:
I cannot find any wifi 5GHz. I am connecting to my home 5GHz (Virgin Media Superhub) from my HP Pavillion laptop, MBP, iPhone and iPad. But on Nexus 9, I am not able to scan any 5GHz network:
2.4Ghz works fine though:
I have enabled all possible channels in Settings (Wifi Analyzer):
In system Settings, I have tried both Automatic and 5GHz only:
I have performed OTA updated after first time switched on device and connected to 2.4GHz network at work, didn't notice whether there was an issue on 5GHz until I got home.
So, is there a problem with the latest OTA, or simple this unit needs to be RMA?
BR/Richard
Click to expand...
Click to collapse
Been a while, but since this is one of the top Google results, and I've been pulling my hair for a couple of hours without finding a solution online, I thought I might chime in with what I found.
If your N9 is not seeing certain 5GHz channels, what is your model, WiFi or LTE? Also, apparently there is an "international" version of the LTE one, which I just got (I'm in the US) because it was cheap, and I didn't mind it affecting certain LTE bands, but I didn't think it would affect WiFi. In any case, the solution was to simply insert a SIM card from my region (T-mobile US) and the missing 5GHz networks appeared in the list. I don't have a solution if this is happening with WiFi-only Nexus 9's though.
You need to insert the SIM after turning on the tablet. If you turn it on with the SIM inserted, it won't show the hidden 5GHz channels. You can just reinsert it, or toggle off/on airplane mode though.
I also googled to see if there was an app to change Wifi regions, but the only one I found (from XDA) requires root, and doesn't work for this particular problem anyway.
Well I have never been able to connect to the 5ghz channel until now. Finally! Changing the router to use channel 48 for the 5ghz and it is running as expected. I love fixes like this.
Hamm1701 said:
Well I have never been able to connect to the 5ghz channel until now. Finally! Changing the router to use channel 48 for the 5ghz and it is running as expected. I love fixes like this.
Click to expand...
Click to collapse
Do you have a Wi-Fi or LTE model? If you have an LTE model have you tried inserting a SIM card like I said in the post above? I got access to the upper channels which are supposed to be higher performance. From 149 to 161.
whats the highest linkspeed you guys are getting? my nexus 6 gets 866Mbps , i guess it dpends on your AC router specs mine is ac1750 i think
what app do i use to check what channel my nexus 9 is connected to? i think its below 36
andy o said:
Do you have a Wi-Fi or LTE model? If you have an LTE model have you tried inserting a SIM card like I said in the post above? I got access to the upper channels which are supposed to be higher performance. From 149 to 161.
Click to expand...
Click to collapse
Wifi model for me
cobyman7035 said:
whats the highest linkspeed you guys are getting? my nexus 6 gets 866Mbps , i guess it dpends on your AC router specs mine is ac1750 i think
what app do i use to check what channel my nexus 9 is connected to? i think its below 36
Click to expand...
Click to collapse
I use netgears wifi analyzer.