Related
I was installing supercurio's voodoo sound kernal using the SGS kernal flasher and my phone is stuck on the Samsung reboot screen. Its saying not enough partion space. I can get into clockwork recovery buy have no idea what to do? The phone is saying convert data partion, not enough space on partion.... I tried to flash this.......Voodoo-stable-5.4.2-Froyo-2.2.1-GT-I9000-unsigned-update.zip
anybody, please help me
my phone keeps rebooting over and over the samsung Galaxy s GT-I9000 screen
somebody please help me
the drugstore said:
somebody please help me
Click to expand...
Click to collapse
You flashed wrong kernel.
EDIT: I made it short above just to let you know im trying to help. You flashed a kernel for GT-i9000, the international model, not SGH-T959, our Vibrants. Go to http://forum.xda-developers.com/showthread.php?t=728929 and download USB driver for your PC. Then go to http://forum.xda-developers.com/showthread.php?t=821625 and download Odin v1.7. And go to http://forum.xda-developers.com/showthread.php?t=870480 and download one of Odin flashable .tar Voodoo kernels, KA6, KA7 or KB1 preferably. Try match it with your ROM just to be safe.
Install the USB driver. Then extract Odin3 v.1.7.rar and run the executable. Leave Odin open. Turn off your phone by pulling out battery, plug USB cord to your phone and to your PC, press and hold volume up and down buttons, and insert battery. You should be in Download mode, and Odin will recognize your phone and display a COM#. Now click on PDA button and select the .tar file you downloaded earlier. And press Start button and wait untill everything is finished and your phone reboots.
The initial boot may take a bit as Voodoo will convert your filesystem into ext4. You will hear voice telling you what's going on. And you should be good to go.
Just in case above instruction doesn't work (I personally never flashed an i9000 kernel), try reverting everything back to stock. Doing so will require a couple of additional files.
Go to http://forum.xda-developers.com/showthread.php?t=734475 and download JFD Odin Image and 512 PIT file. Extract PIT file first. Then launch Odin, put your phone into Download mode, and in Odin press PIT button and select the 512 PIT file you just downloaded. And press PDA button and select JFD .tar file. This time make sure Re-Partition option is selected. And press Start. This take a bit longer than just flashing a kernel, but no longer than 5 minutes. Once you're back to stock (original released in July 2010), flash any other ROM of your choice.
the drugstore said:
I was installing supercurio's voodoo sound kernal using the SGS kernal flasher and my phone is stuck on the Samsung reboot screen. Its saying not enough partion space. I can get into clockwork recovery buy have no idea what to do? The phone is saying convert data partion, not enough space on partion.... I tried to flash this.......Voodoo-stable-5.4.2-Froyo-2.2.1-GT-I9000-unsigned-update.zip
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=848737
I did the exact same thing just a few days ago. I asked on this forum and got some great help. I downloaded the new Odin Software v1.3 and also downloaded the stock Vibrant software. Put them all on your computer,extracted, and hold down just the 2 volume keys then plug in your usb cable. This will put you into download mode. Look in the Odin program and it should recognize your phone, if it doesnt then youll have to download the drivers again. Its in the Vibrant Bible. After all of that upload the Rom to the pda section in Odin and make sure you dont click anything else then push start. This will take a few minutes to load then your phone will reboot and your back to stock. This worked for me hope it works for you.
Thanks everybody, I used Baywolf's, hope his name is spelled correctly, Vibrant toolbox and got into Odin and reflashed my phone back to 2.1 stock, them Samsung Kies to 2.2 stock. Thanks for the replies
im having the same problem except that when i reflash my phone to stock and try to turn on my phone again it wont...i have to reflash it everythime i want to turn it on and it deletes everything everything
(EDIT) Found this on FascinateForums.com ( Originally Posted by bhfd64 )and decided to share since I haven't found anything "as in depth". This is to go from OTA ED01 Update and reinstall ROOT and CWM 2.5.1x
I had an issue trying other ways of always returning to blue recovery, so thought this would help those with the same issue.
Downloads:
Download Samsung drivers from HERE.
Download Odin (computer program) from HERE.
Download ClockworkMod Recovery from HERE. (place this file somewhere on your computer where you can easily locate it).
Download "update.zip" file from HERE. (place this file on the root of your sdcard...not within any folders).
Download "su-2.3.6.1.x.zip" file from HERE. (place this file on the root of your sdcard...not within any folders).
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs for this to work properly)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord which came with your phone into a powered USB port on your computer (usually on the back of the CPU).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Press the PDA button in Odin (NOT the PHONE button) and navigate to the cwr-all.tar file you downloaded earlier.
7. Press START. When this process has finished, you'll be notified in Odin (succeeded 1/failed 0) and your phone screen will go blank.
8. Unplug your phone and re-insert battery.
9. Press and hold BOTH volume buttons and the power button simultaneously. Hold all three until you see "SAMSUNG" appear. This will boot your phone into recovery. If your text is red, then you're already in ClockworkMod (CWM) Recovery and you can skip the rest of this step. If the recovery menu is blue, then you're in stock recovery. Use the volume rocker to navigate down to "apply sdcard:update.zip" and select using the "Home" softkey. This will take you to CWM Recovery (red text menu). If your phone does not boot into recovery here, just pull the battery or wait for it to boot up and then power it down and try this again. It may take a couple tries for you to get it right.
10. When you see the red text and "CwM Voodoo Lagfix Recovery 2.5.1x" at the top, use the volume rocker to navigate down to "Wipe data/factory reset." Press the power button to select, and then navigate to yes, and press the power button again to select. Do this 3 times.
11. Scroll down to "Wipe cache partition," use power button to select, and then highlight and select "Yes." Do this 3 times.
12. Scroll down to "advanced" and then select "Wipe dalvik cache." Scroll to "Yes," and use power button to select. Do this 3 times.
13. Press the "Menu" softkey to return to the previous menu in CWM Recovery.
14. Navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
15. Navigate to "choose zip from sdcard" and select.
16. Navigate to the rooted "su-2.3.6.1.x.zip" file that you downloaded earlier, and select it. Scroll to "Yes," and use power button to select.
17. When you're advised of completion, press the "Menu" softkey to go back to the previous CWR screen, then highlight and select "reboot system now."
At this point your phone will reboot and you'll be rooted with fully bloated ED01 Froyo. Open up your app drawer. You should see an app called "SuperUser". If it's there, you're done! Now you can think about possibly moving on to a custom ROM and/or kernel.
Don't break your phone! It's not my prob if you do! Good Luck, This did work and I am going good!
I was literally JUST looking for a way to root the ED01 rom. Dude...YOUDAMAN!
Isn't this just the same su and busybox nemesis2all posted yesterday right here in the XDA development forum only with out the basic steps of installing ODIN and update.zip which isn't even needed with the latest CWM?
http://forum.xda-developers.com/showthread.php?t=1045048
landshark68 said:
Isn't this just the same su and busybox nemesis2all posted yesterday right here in the XDA development forum only with out the basic steps of installing ODIN and update.zip which isn't even needed with the latest CWM?
http://forum.xda-developers.com/showthread.php?t=1045048
Click to expand...
Click to collapse
not taking anything away from nemesis2all, I have used many of his creations, this is just a little more in depth. I tried his way and kept getting blue recovery, found this and thought it would help those having the same issues.
blackmamba0730 said:
I was literally JUST looking for a way to root the ED01 rom. Dude...YOUDAMAN!
Click to expand...
Click to collapse
Thanks man! Happy to help you out!
sgtflick said:
not taking anything away from nemesis2all, I have used many of his creations, this is just a little more in depth. I tried his way and kept getting blue recovery, found this and thought it would help those having the same issues.
Click to expand...
Click to collapse
Oh, ok. I was just confused.
landshark68 said:
Oh, ok. I was just confused.
Click to expand...
Click to collapse
It's cool man, I can see how it could of been mistaken. Edited- thanks for the call out
good job man, wish someone made it that easy when i first started out.
Just use Super One Click to root, fast and easy.
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
suppliesidejesus said:
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
Click to expand...
Click to collapse
I am running a stock kernel and have root/red cwm now. Im just not on stock ROM, im using Evil Fascinate 3.3.2 ... I was able to do this through these instructions.
I tried SuperOneClick and it just didn't do it for me.
Sent from Evil Fascinate 3.3.1/Black Alien 2.2/ED01 Stock
ok so i am looking just to root 2.2 and leave it stock for now so i can use some root apps what kernal should i use and this method will work for that right
sgtflick said:
I am running a stock kernel and have root/red cwm now. Im just not on stock ROM, im using Evil Fascinate 3.3.2 ... I was able to do this through these instructions.
I tried SuperOneClick and it just didn't do it for me.
Sent from Evil Fascinate 3.3.1/Black Alien 2.2/ED01 Stock
Click to expand...
Click to collapse
That's odd, I rooted my phone in less than 3 minutes using super one click.
fortesquieu said:
That's odd, I rooted my phone in less than 3 minutes using super one click.
Click to expand...
Click to collapse
Yeah, didn't work for me, as I said .... I tried multiple times
Sent from Evil Fascinate 3.3.2/Black Alien 2.5/ED01 Stock
Dirt_Mcgirt said:
ok so i am looking just to root 2.2 and leave it stock for now so i can use some root apps what kernal should i use and this method will work for that right
Click to expand...
Click to collapse
I can tell you that I rooted stock ED01 with this method, make sure you uncheck autoboot in ODIN and restart in recovery with 3button method to confirm red recovery stuck .... im on stock ED01 kernel, but you can use any of the (TW) EC01 kernels out there . im sticking with stock until they start working out some tweaks...that's just me though
Sent from Evil Fascinate 3.3.2/Black Alien 2.5/ED01 Stock
suppliesidejesus said:
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
Click to expand...
Click to collapse
This is important information. Unfortunately none of the HOWTO threads on installing CWM mention this in the instructions and it took me hours to even become aware that this was what was happening to me. I haven't yet figured out how to remedy the problem but at least I know what it is now. Strangely I don't think I had any problem getting CWM to stick after flashing EB01 a while back.
The original instructions on FF have been updated somewhat. Among other things the wiping steps seem to not be necessary for just getting root. Here's the link. About to try this but with CWM3.
phonefiend said:
This is important information. Unfortunately none of the HOWTO threads on installing CWM mention this in the instructions and it took me hours to even become aware that this was what was happening to me. I haven't yet figured out how to remedy the problem but at least I know what it is now. Strangely I don't think I had any problem getting CWM to stick after flashing EB01 a while back.
Click to expand...
Click to collapse
This is from original thread by Adrynalyne.
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
I spent days working on this issue of reverting back to stock recovery. I can tell you SSJ is absolutely correct, it is all about the kernel. Anytime you flash a stock kernel, whether it be in an ODIN package or flashing a stock kernel or a ROM that includes a stock kernel in CWM, the stock kernel will revert you back to stock blue (2e) recovery. From my experience and speaking with others, this only happens on nonvoodoo because obviously there are no stock voodoo kernels, they are all custom. You can flash the current CWM and it will stick through flashing modems in ODIN, and themes, patches, and mods in CWM. But as soon as you flash a stock kernel, you have to reflash the current CWM. So follow SSJ's advice and immediately flash a custom kernel if you are running nonvoodoo. My apologies to the OP that this is off topic from the thread. Just wanted to share the info I learned from days of previous testing.
fitti28 said:
This is from original thread by Adrynalyne.
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
Click to expand...
Click to collapse
He seems to have added that in the ED01 thread in the last few hours but in most of the recent Clockwork threads they don't mention this which is surprising.
I installed the Voodoo Kernal for eclair. Everything went smooth, but now I'm stuck with the Vibrant screen. I don't have a back up because I couldnt get on the clockwork recovery, my reason for flashing this Kernal...
Is there any way I can get the stock Kernal back? or did I hardbrick my phone?
You need to odin back to stock Read up on this in the Noob guide in the General section By S15274N
Here is the basic thing you need to do but go read up @ the noob section as well..
1. Open Odin, plug in your phone, put into download mode.
2. Load the PIT file into the appropriate area and the .tar in the PDA area.
3. You want to make sure the 're-partition' box is checked.
4. Now click start, let it finish, and this time your phone will load up just fine!
Doing this method will get everything back to normal and the phone will work just like it did right out of the box.
5. Then, download Rom manager then>root the phone you will have to go into recovery and boot into there twice to see the cwm red menu. Once there you can flash a rom that is already loaded into the int sd card and flash your new Rom.
Thanks a lot. Much easier than I thought it was going to be.
Okay, as the thread title states and as I had searched for a Samsung Vibrant related thread about this issue I haven't found any. My issue as stands is when I try to perform a Factory Data Reset on my Samsung Vibrant t959VUVKD1, 2.2.1 Froyo, it only comes up with this set of words on the recovery screen.
-- Wiping data...
Formatting DATA:...
Data wipe failed.
Formatting CACHE:...
Formatting DBDATA:...
Db data wipe Failed.
-- Appling Multi-CSC...
Installing Multi-CSC
Install default apk;files, please wait
E: Can't mount /dev/block/mmcblk0p2
(No such file or directory)
E:copy_data_default_apk:Can't mount DATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
Click to expand...
Click to collapse
So, as one can see this is evidence of my attempt at rooting and using Clockworkmod Recovery.
What I used was SuperOneClick 2.2 and successfully rooted my phone but then I decided to unroot after finding out ClockworkMod Recovery wasn't able to create a backup on my phone, also, I used a 3e_recovery_installer batch file I found somewhere which managed to unlock my Android system recovery so I could get into Clockworkmod Recovery but ever since I unrooted and uninstalled Clockworkmod Recovery it won't allow me to perform a factory data reset. I was able to do it TWICE after unrooting my phone but now I can't perform the factory data reset and I do not understand why.
Have you tried to odin back to stock or use the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
Never used Odin or Toolbox before because I've never found a concrete tutorial on how to correctly flash/root my vibrant. I would like to flash but I just don't feel safe about it even though I had downloaded a supposedly stock rom of the UKVD1 rom for Vibrant.
nomadrider123 said:
Have you tried to odin back to stock or use the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
Click to expand...
Click to collapse
Erm, I used the Toolbox to use "Flash to Stock" and when Odin opened up I selected Pit.pit and it showed a yellow to green color on the first box and my phone turns off then nothing happens. What does this mean?
1. When odin opens select pit
2.click the Pit.pit file after screen change and click open
3.You should be returned to odin main.
4. click pda
5.click pda file and click open.
6.you are returned to main odin.
7.set phone down, click start and do not unplugg
8 let it run till pass, and auto reboot
Sugartibbs said:
1. When odin opens select pit
2.click the Pit.pit file after screen change and click open
3.You should be returned to odin main.
4. click pda
5.click pda file and click open.
6.you are returned to main odin.
7.set phone down, click start and do not unplugg
8 let it run till pass, and auto reboot
Click to expand...
Click to collapse
I did all that just now but now I'm stuck on a looping charging screen or a looping Samsung Vibrant screen. However, this isn't the same as the original T-Mobile screen and even so how do I get past the looping screen?
1. pull the battery
2. insert the battery
3.hold down volumeup/ volumedown buttons
4. insert the usb cable, you should enter download.
5 reset toolbox and select flash to stock, odin should appear,
My experience.
When you are facing boot loop, it's very hard to get in to download mode.
I tried button trick for download mode, but I failed.
So I used adb and tried to reboot into download mode by command.
I repeated it until I could get into the mode.
Anyway, download Toolbox and once u get into the mode,
try to go back to stock. That 'll fix everything.
I also know that the logo changed after I flashed back to stock.
I faced I9000 logo which wasn't before.
FYI: + the version will be eclair, and I couldn't get the official update.
Anyway good luck.
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
If you never get into download mode.. Try to use JIG.
Another way is to disassembly your phone and do something.
I suggest you buy a JIG.
Problem is, I can easily get into Download mode by:
1. Remove USB Cable
2. Pull battery and re-insert
3. Plug in USB cable
4. Hold Volume - and +
And it's in Download mode
But I want to get the original Smasung Vibrant 2.2.1 UVKD1 Rom back on but it appears the provided files aren't it?
Btw, what is a Pit and and PDA file supposed to be, I'm a complete noob at this point.
The pit and pda files in aio toolbox are the stock rom the vibrant is shipped with, if you want anythig else on it you have to download it and flash it through odin, rom manager, or cwm.
Sugartibbs said:
The pit and pda files in aio toolbox are the stock rom the vibrant is shipped with, if you want anythig else on it you have to download it and flash it through odin, rom manager, or cwm.
Click to expand...
Click to collapse
I see. But now when the phone starts up it shows a buncha dots in consecutive order to the Samsung Vibrant screen after I flashed to stock using the pit and pda files and it just loops continuously until I pull the battery. Is there anything that can be done to get past the looping?
Does the pitcure look like a phone....!....computer? If so then you are softbricked and just get back in download mode and re-Odin, but make sure that when you Odin, you DO NOT have the repartition checked. Probably what happened.
If it is not the above, can you get into recovery? Can you now do a factory reset? Wipe cache, dalvik and reset usually clears the bootloop problem.
Woodrube said:
Does the pitcure look like a phone....!....computer? If so then you are softbricked and just get back in download mode and re-Odin, but make sure that when you Odin, you DO NOT have the repartition checked. Probably what happened.
If it is not the above, can you get into recovery? Can you now do a factory reset? Wipe cache, dalvik and reset usually clears the bootloop problem.
Click to expand...
Click to collapse
Unfortunately I can't get into recovery. I also Odin'd with the given Pit.pit and PDA.tar files with Repartition unchecked but that didn't change anything.
I cant figure how you could be in a bootloop coming out of odin. Is the AIO you downloaded for vibrant. I think theres one for fascinate and captivate.
Sugartibbs said:
I cant figure how you could be in a bootloop coming out of odin. Is the AIO you downloaded for vibrant. I think theres one for fascinate and captivate.
Click to expand...
Click to collapse
I used the AIO Toolbar for Vibrant as provided by the link by the person earlier. The loop just continues forever and ever until I remove the battery.
The three button method of entering recovery hasnt worked?
You mean hold Power and Vol + and -?
No, it doesn't work.
i am hesitant to advise anything, the fact that factory reset didnt work, and recovery has been removed is troubling. when i get a fail message when flashing to stock ive used eugenes froyo that does not brick. If all else fails you might google it and read the op. Its a pda file used by odin.
What I find strange is that download mode works perfectly fine but nothing else.
what I find strange is coming out of odin and looping, you should come out in recovery with an error message. a cannot mount data or bdata. storage not ready. Removing recovery may have removed more than was expected. check the op on eugenes froyo you have to get back to stock.
First, let me apologize for what I'm sure is repetition, I searched the site and could not find the step by step process that I need. So again sorry.
I have a rooted Vibrant (I think, the superuser permission icon is there, from the market I downloaded "SU update fixer" and "BusyBox"because somewhere online it said I should) I updated to froyo when it originally came out and was told I had to go back to eclair to root which I just did 3 days ago.
My problem is I can't get clockwork recovery on my phone so I can flash a rom. I've downloaded heimdall and went through the steps (when I'm in the command prompt screen I get the error that it is not recognized as an internal or external command. Also "rom manager" Google market link does not recognize my phone, so I can't just download the app directly. It doesn't even come up when I search the market on my phone.
Another question, I thought once I rooted I'd be able to delete some bloatware from the device? How do I do it? Do I need to flash a rom before I can do this?
If it helps here are the current specs of my phone:Model SGH-T959, Firmware 2.1-update1, Baseband T959uvjfd, Kernel 2.2.29,Build Eclair
Please help.
Please help!!
to the people who have read my post please help.
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Try this
rawmobile215 said:
First, let me apologize for what I'm sure is repetition, I searched the site and could not find the step by step process that I need. So again sorry.
I have a rooted Vibrant (I think, the superuser permission icon is there, from the market I downloaded "SU update fixer" and "BusyBox"because somewhere online it said I should) I updated to froyo when it originally came out and was told I had to go back to eclair to root which I just did 3 days ago.
My problem is I can't get clockwork recovery on my phone so I can flash a rom. I've downloaded heimdall and went through the steps (when I'm in the command prompt screen I get the error that it is not recognized as an internal or external command. Also "rom manager" Google market link does not recognize my phone, so I can't just download the app directly. It doesn't even come up when I search the market on my phone.
Another question, I thought once I rooted I'd be able to delete some bloatware from the device? How do I do it? Do I need to flash a rom before I can do this?
If it helps here are the current specs of my phone:Model SGH-T959, Firmware 2.1-update1, Baseband T959uvjfd, Kernel 2.2.29,Build Eclair
Please help.
Click to expand...
Click to collapse
Try this (Use method B) it works like a charm every time.
also note that you dont have to install a custom rom if you prefer not to.
if you just flash the zip and reboot to clockworkmod then your set.
this is from s15274n's guide found here: http://forum.xda-developers.com/showthread.php?t=849028
There are two options here. Choose which is best for you, before you start.
ROOT ONLY METHOD:
A – This is an update.zip (633KB) that roots your phone only. You can then install Rom Manager from the Market to flash CWR (Clockwork Recovery) and install custom ROMs.
INSTALL CLOCKWORK RECOVERY AND FLASH A ROM THAT WILL GIVE ROOT ACCESS (MY PREFERRED METHOD):
B – use the other update.zip (1.7MB) and this will flash CWR for you – allowing you to immediately flash a custom ROM.. I do this because it's faster.
1.
A: Download this update.zip file to root your phone. You plan to install Rom Manager to flash CWR and a new ROM later.
B: Download this update.zip file to flash CWR... you will need to flash a custom ROM for Root. I prefer this method.
NOW DOWNLOAD THE ROM YOU PLAN TO FLASH
2.
Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/
3.
Unplug the USB (assuming you are still connected after using ODIN)...
Hold down volume up + volume down + Power for about 9 seconds.
If you prefer, you can power off your phone, then hold in all 3 buttons to boot into recovery, I don't see the point in waiting for the phone to power off.
This will get you to a recovery menu (blue/purple text) after some yellow text.
4.
In this (the stock recovery menu) select 'Reinstall Packages'
Use volume to navigate + power to select.
5.
It will cycle a bit, you will see that yellow text again, then it will return to the stock recovery. Select Reinstall packages again.
You are now in CWR (clockwork recovery).
You can either reboot, flash your new ROM or make a backup now...
---------- Post added at 12:45 PM ---------- Previous post was at 12:43 PM ----------
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
heh you beat me to it.
Titanium Rules
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Titanium Backup rules. Finally getting rid of these pointless apps. So glad to see SIMS 3 gone!! Thanks again.
THANKS!!!
firefly6240 said:
Try this (Use method B) it works like a charm every time.
also note that you dont have to install a custom rom if you prefer not to.
if you just flash the zip and reboot to clockworkmod then your set.
this is from s15274n's guide found here: http://forum.xda-developers.com/showthread.php?t=849028
There are two options here. Choose which is best for you, before you start.
ROOT ONLY METHOD:
A – This is an update.zip (633KB) that roots your phone only. You can then install Rom Manager from the Market to flash CWR (Clockwork Recovery) and install custom ROMs.
INSTALL CLOCKWORK RECOVERY AND FLASH A ROM THAT WILL GIVE ROOT ACCESS (MY PREFERRED METHOD):
B – use the other update.zip (1.7MB) and this will flash CWR for you – allowing you to immediately flash a custom ROM.. I do this because it's faster.
1.
A: Download this update.zip file to root your phone. You plan to install Rom Manager to flash CWR and a new ROM later.
B: Download this update.zip file to flash CWR... you will need to flash a custom ROM for Root. I prefer this method.
NOW DOWNLOAD THE ROM YOU PLAN TO FLASH
2.
Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/
3.
Unplug the USB (assuming you are still connected after using ODIN)...
Hold down volume up + volume down + Power for about 9 seconds.
If you prefer, you can power off your phone, then hold in all 3 buttons to boot into recovery, I don't see the point in waiting for the phone to power off.
This will get you to a recovery menu (blue/purple text) after some yellow text.
4.
In this (the stock recovery menu) select 'Reinstall Packages'
Use volume to navigate + power to select.
5.
It will cycle a bit, you will see that yellow text again, then it will return to the stock recovery. Select Reinstall packages again.
You are now in CWR (clockwork recovery).
You can either reboot, flash your new ROM or make a backup now...
---------- Post added at 12:45 PM ---------- Previous post was at 12:43 PM ----------
heh you beat me to it.
Click to expand...
Click to collapse
Thanks a million!! I'm now running Android 4.2.2 using CM 10.1.3.
My only problem is I seem to have lost my apps/contacts/etc. I don't have android market anymore. Would you know how I can get my apps back??? I see my backups (reware) in the file section (external sd) but I don't know how to get them.
Gapps
rawmobile215 said:
Thanks a million!! I'm now running Android 4.2.2 using CM 10.1.3.
My only problem is I seem to have lost my apps/contacts/etc. I don't have android market anymore. Would you know how I can get my apps back??? I see my backups (reware) in the file section (external sd) but I don't know how to get them.
Click to expand...
Click to collapse
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android: http://goo.im/gapps
but I beleive youll want this one for 4.2.2: http://goo.im/gapps/gapps-jb-20130301-signed.zip
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Thanks Again
firefly6240 said:
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android:but I beleive youll want this one for
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Click to expand...
Click to collapse
Thanks again!! This seems to have worked. XDA is (slang word for sex+ing) AWESOME!!!!
Thanks to you all!!!
To all that posted on my thread thanks a lot for your patience and help.
Now stuck in cwm recovery mode 10/13/13
firefly6240 said:
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android: http://goo.im/gapps
but I beleive youll want this one for 4.2.2: http://goo.im/gapps/gapps-jb-20130301-signed.zip
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Click to expand...
Click to collapse
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Now I'm stuck in recovery mode. Please help, again.
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Odd, I've really only seen that when you try to install a carrier ota update over a custom ROM
Flash the ROM and then the gapps files again in that order and you should be fine though you'll need to restore your apps with titanium backup again afterward.
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 01:38 AM ---------- Previous post was at 01:37 AM ----------
If it happens again you might ask someone in the thread for that ROM if it's a known issue.
Or try an alternate ROM
Sent from my GT-I9000 using xda app-developers app
I tried. Mighty Odin has failed me.
firefly6240 said:
Odd, I've really only seen that when you try to install a carrier ota update over a custom ROM
Flash the ROM and then the gapps files again in that order and you should be fine though you'll need to restore your apps with titanium backup again afterward.
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 01:38 AM ---------- Previous post was at 01:37 AM ----------
If it happens again you might ask someone in the thread for that ROM if it's a known issue.
Or try an alternate ROM
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
For about 6hrs yesterday, I tried using odin to get back to original stock(eclair) it has not worked. I get a pass each time but the phone does not reboot, at first it just relooped the vibrant screen, now vibrant screen flashes then screen goes black. When the phone is plugged in the battery icon just reloops. I noticed that when odin was done the beginning of the recovery screen had a red "data wipe failed" within the normal yellow text then it would turn off and go to the battery screen again. I've used several versions of odin none have worked. If you have any suggestions please let me know. I'm afraid it may be dead forever although I've read many posts that state that android phones are almost impossible to brick. I'm at my wits end.
Odin Issues
rawmobile215 said:
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Click to expand...
Click to collapse
I had that happen once but it was because of a lagfix.
below is a thread with someone with the same issue:
http://forum.xda-developers.com/showthread.php?p=8734352
Also below is what fixed it (it also worked for me but my issue was for sure a lagfix issue):
http://forum.xda-developers.com/showpost.php?p=8698655&postcount=150
Hopefully this helps.
luckily the Vibrant is famously hard to completely brick.
it usually just takes some trial and error to fix it.
don't give up
Didn't Work
firefly6240 said:
I had that happen once but it was because of a lagfix.
below is a thread with someone with the same issue:
http://forum.xda-developers.com/showthread.php?p=8734352
Also below is what fixed it (it also worked for me but my issue was for sure a lagfix issue):
http://forum.xda-developers.com/showpost.php?p=8698655&postcount=150
Hopefully this helps.
luckily the Vibrant is famously hard to completely brick.
it usually just takes some trial and error to fix it.
don't give up
Click to expand...
Click to collapse
Thanks again, I've been at it for a few hours now, it goes into recovery but does not respond to my power button to reboot. Also beginning screen now says 1900. As though it flashed a different version.
rawmobile215 said:
Thanks again, I've been at it for a few hours now, it goes into recovery but does not respond to my power button to reboot. Also beginning screen now says 1900. As though it flashed a different version.
Click to expand...
Click to collapse
the initial odin file you are flashing is a modified 19000 file.
if the 19000 kernel is flashed then the hardware buttons will be mixed up.
dont worry though if you got that far its good dont worry about using the power button to reboot.
just pull the battery.
then you'll need to use Odin again to flash the original android 2.1 files again.
this time it should go through and you'll be back where you started.
from there you'll need to re-root and flash the ROM of your choice.
Still not working
firefly6240 said:
the initial odin file you are flashing is a modified 19000 file.
if the 19000 kernel is flashed then the hardware buttons will be mixed up.
dont worry though if you got that far its good dont worry about using the power button to reboot.
just pull the battery.
then you'll need to use Odin again to flash the original android 2.1 files again.
this time it should go through and you'll be back where you started.
from there you'll need to re-root and flash the ROM of your choice.
Click to expand...
Click to collapse
Ok so I pulled the battery, went back into download mode and tried to flash the original android files. When I did that I ended up with the stuck vibrant screen again. or if its plugged in the battery icon just keeps restarting. I've tried several versions of odin, nothing seems to work. I just keep going back and forth flashing the 19000 and trying to flash the original 2.1. I keep ending up at the same place. Every time I go through the odin process I always get a pass, but the original files do not flash. Again I appreciate all your help, I'll keep at it for a day or so but I'm losing the bit of patience I have left.
rawmobile215 said:
Ok so I pulled the battery, went back into download mode and tried to flash the original android files. When I did that I ended up with the stuck vibrant screen again. or if its plugged in the battery icon just keeps restarting. I've tried several versions of odin, nothing seems to work. I just keep going back and forth flashing the 19000 and trying to flash the original 2.1. I keep ending up at the same place. Every time I go through the odin process I always get a pass, but the original files do not flash. Again I appreciate all your help, I'll keep at it for a day or so but I'm losing the bit of patience I have left.
Click to expand...
Click to collapse
try following the steps below, I added the links for the files you'll need (hopefully the links are working, I cant test them from work unfortunately)
note that the first odin file is an 19000 file and the volume buttons on the phone will be reversed and menu selection will not work in recovery.
if you need to reboot you can use ADB or just pull the battery.
1. Download Eugenes 'Froyo that does not brick' file. HERE
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'. HERE
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Still no luck.
firefly6240 said:
try following the steps below, I added the links for the files you'll need (hopefully the links are working, I cant test them from work unfortunately)
note that the first odin file is an 19000 file and the volume buttons on the phone will be reversed and menu selection will not work in recovery.
if you need to reboot you can use ADB or just pull the battery.
1. Download Eugenes 'Froyo that does not brick' file. HERE
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'. HERE
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
Yup, This was the order that I followed to the T. So step #7 was what got 19000 on my phone. It never errored out or rebooted just went to 19000 recovery screen and stays there. I took the battery out, put it back in, went back to download mode, I downloaded and tried to flash the True stock 2.1 and that's what got me to just a Vibrant screen. I'm not sure if my PC(windows XP) is the problem though this is the same PC I used to root and flash cyanogenmod, or if something inside the phone is messed up. I did notice during an earlier recovery the words "wipe data fail" in red among the normal yellow text. This may be the cause of the repeated bad flashes of the stock 2.1. I'll keep trying when I get off today and tomorrow but I may have to bite the bullet and get a new phone on Thurs.
rawmobile215 said:
Yup, This was the order that I followed to the T. So step #7 was what got 19000 on my phone. It never errored out or rebooted just went to 19000 recovery screen and stays there. I took the battery out, put it back in, went back to download mode, I downloaded and tried to flash the True stock 2.1 and that's what got me to just a Vibrant screen. I'm not sure if my PC(windows XP) is the problem though this is the same PC I used to root and flash cyanogenmod, or if something inside the phone is messed up. I did notice during an earlier recovery the words "wipe data fail" in red among the normal yellow text. This may be the cause of the repeated bad flashes of the stock 2.1. I'll keep trying when I get off today and tomorrow but I may have to bite the bullet and get a new phone on Thurs.
Click to expand...
Click to collapse
You might have already tried this but you might try leaving it at the vibrant logo for a good 10 minutes.
I find that when I odin back to stock it takes a bit longer than usual to boot.
If it stays stuck you might try pulling the battery and try booting to recovery (if Odin was successful back to stock it should be the stock recovery)
if it lets you into stock recovery we will at least know the odin flash worked.