I applied the steelblue theme from here:
http://forum.xda-developers.com/showthread.php?t=1042365
After applying in CWM, I rebooted, but I am stuck on the reboot screen.
What do I do now?
If it helps, I accidentally ran the theme on 2.3.4 when I'm pretty sure it was meant for the older version of android.
I only realized until later, and by then it was too late.
noodleyhead said:
I applied the steelblue theme from here:
http://forum.xda-developers.com/showthread.php?t=1042365
After applying in CWM, I rebooted, but I am stuck on the reboot screen.
What do I do now?
If it helps, I accidentally ran the theme on 2.3.4 when I'm pretty sure it was meant for the older version of android.
I only realized until later, and by then it was too late.
Click to expand...
Click to collapse
I love it when people answer their own questions.
Phalanx7621 said:
I love it when people answer their own questions.
Click to expand...
Click to collapse
actually no i didnt answer my own question because I still dont know what to do
Could someone pleaseeeeeee help?
Are you able to boot to recovery, and flash a backup?.....hopefully you at least installed clockwork and made a backup first.
maulich said:
Are you able to boot to recovery, and flash a backup?.....hopefully you at least installed clockwork and made a backup first.
Click to expand...
Click to collapse
I'm pretty sure I can. Can you tell me how?
noodleyhead said:
I'm pretty sure I can. Can you tell me how?
Click to expand...
Click to collapse
Power off phone > hold power button and volume down button together and hold it until "fastboot" appears > as soon as you see "fastboot" appear ..use volume rockers to scroll through list and select "android recovery"...IF you made a backup ..install your back up. But since you're asking how to get into recovery...pretty you didn't make a backup ..did you?
Sent from my MB860 using XDA App
defnow said:
Power off phone > hold power button and volume down button together and hold it until "fastboot" appears > as soon as you see "fastboot" appear ..use volume rockers to scroll through list and select "android recovery"...IF you made a backup ..install your back up. But since you're asking how to get into recovery...pretty you didn't make a backup ..did you?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Actually I just did.
Just now, my atrix randomly booted into recovery mode(looks like this: http://atrix4ghacks.com/wp-content/uploads/2011/07/atrix-4g-clockworkmod-recovery-6-300x257.jpg) , so the first thing i did was make a backup. But is there any way to just boot into the normal unthemed state from here?
I tried to select rebooting, but it still booted into Steel Blue. So i took the battery out and turned it back on and did some random stuff until it booted back into CWM. Can I somehow unflash the Steel Blue theme and boot back to the normal state? I know, its probably a stupid question. But I'm pretty new, so I dont really know what I'm doing. :|
Related
Hi Guys am quite new at this however i've been doing some research on how to install [ROM]KaosFroyo V30 on my Eris but i have not found any instructions or guide and so i was wondering if anyone here could help? by the way i am running the android 2.1 version released by Verizon an HTC and hopefully this won't be a problem.
Google is your friend, also the Eris root app might make things easier.
Sent from my FroyoEris using XDA App
first question is are you rooted?
i think the phone's rooted now!
well i used the eris root app and when it asked me to i used the KaosFroyo V30 zip and it seemed to install ok, then i boot up the device and after an initial boot screen i get a screen saying android in blue and like a white light inside i don't know if that makes any sense but that's where the phone stays. i guess i am rooted now but then phone won't fully boot up
ssvtcobra said:
well i used the eris root app and when it asked me to i used the KaosFroyo V30 zip and it seemed to install ok, then i boot up the device and after an initial boot screen i get a screen saying android in blue and like a white light inside i don't know if that makes any sense but that's where the phone stays. i guess i am rooted now but then phone won't fully boot up
Click to expand...
Click to collapse
The first boot can take 10+ mins. Wait it out.
well the phone boots pass the skatebording androids and then it shows "ANDROID" with a while light scrolling through the letters and is been like that for about an hour now.
ssvtcobra said:
well the phone boots pass the skatebording androids and then it shows "ANDROID" with a while light scrolling through the letters and is been like that for about an hour now.
Click to expand...
Click to collapse
Did you download goggle apps and flash that zip while in recovery after you flashed kaos v30?
Edit:does kaos have a google apps zip?
Funnyface19 said:
Did you download goggle apps and flash that zip while in recovery after you flashed kaos v30?
Click to expand...
Click to collapse
ok so this is what i did i downloaded eris root app i ran the app rebooted the phone as instructed by the app turned it off again then held down volume down and pressed power. then i chose recovery and from there instead of using the default zip file i used the "kaos v30" zip file everything installed well then i just rebooted the device. since then the phone doesn't boot completely it just says android and it just stays there.
ssvtcobra said:
ok so this is what i did i downloaded eris root app i ran the app rebooted the phone as instructed by the app turned it off again then held down volume down and pressed power. then i chose recovery and from there instead of using the default zip file i used the "kaos v30" zip file everything installed well then i just rebooted the device. since then the phone doesn't boot completely it just says android and it just stays there.
Click to expand...
Click to collapse
turn off, turn back on holding the end button and the vol UP, use the trackball scroll to backup/restore click the trackball, click nand backup, let it run hit vol down, scroll to wipe, wipe data and wipe dalvik, hit volume down hit flash zip click on the kaos v30 zip assuming that its on your sd card and let it run and then reboot shouldnt take much longer than 10 min to boot up
Thanks everyone for the help specially Funnyface19 your last suggestion solved my problem my phone is working great!
ssvtcobra said:
Thanks everyone for the help specially Funnyface19 your last suggestion solved my problem my phone is working great!
Click to expand...
Click to collapse
good luck and remember to always do a nand backup before flashing anything...saves more lives than seatbelts
The thing that you did different was wiping caches before flashing. That's why it works now.
BTW, NAND backups are important, but the one you made this time was worthless.
A NAND backup makes a copy of your system. Unfortunately your system wasn't functional when you created it.
Use this as a lesson. Always do a NAND before you change anything. That way you can restore to a working system.
Sent from my FroyoEris using XDA App
Hi guys I was messing around on the HTC DROID ERIS and I may have damage my phone. I change the wrong NV items. 435,436,1192,1194 and now phone keeps turning on and off. it only gets to the skate boarding green dudes. I try adding a custom rom but i dont think i am rooted. I try doing the system wipe but as soon as it reboots to enter that mode it reboots and reboots again same system. I can only update with the PB00IMG.zip but does not changes anything. I can only keep it stable on the hboot usb which I dont know what else to do with that. anyone has any idea on how to correct this issue...
Hi all i think i have bricked my aria, the power button doesnt work and my cm7 rom crashed and i dont know/cant get into recovery i can get into the stock recovery but to use it you need to use the power button to select options. any ideas? thanks
If you have CM7 installed you don't have stock recovery anymore, you have Clockwork Recovery instead. What version of Clockwork are you using? Newer versions use the trackball to select, you could try that.
Maybe you're confusing "stock recovery" with the bootloader screen. If that's the case, try installing the Android SDK w/ ADB on your computer and using the USB connection to run the command adb reboot recovery.
STaria said:
Maybe you're confusing "stock recovery" with the bootloader screen.
Click to expand...
Click to collapse
It must be since the stock recovery is erased with CWM in order to be able to flash the rom.
Have phone off and plug into wall USB. Should go into cwm, right?
Sent from my Liberty using XDA App
morgs640 said:
Hi all i think i have bricked my aria, the power button doesnt work and my cm7 rom crashed and i dont know/cant get into recovery i can get into the stock recovery but to use it you need to use the power button to select options. any ideas? thanks
Click to expand...
Click to collapse
It can't be stock recovery you got into. It must be CWM recovery you got into since the stock recovery is erased once CWM is flashed. This had to be done for you to install CM7. Have you experienced problems with your power button before your rom crashed? And how exactly did it crash?
andrew.cambridge said:
Have phone off and plug into wall USB. Should go into cwm, right?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Yes. So he has version 2.5.0.1.
Hi thx for all your help. Yes it is the bootloader sorry i was confused, the rom crashed a long time after power button broke and im unable to get into cwm do you normally hold down and power on?
morgs640 said:
Hi thx for all your help. Yes it is the bootloader sorry i was confused, the rom crashed a long time after power button broke and im unable to get into cwm do you normally hold down and power on?
Click to expand...
Click to collapse
I'm still a little confused at to your situation. Is your phone currently off or on? If your power button doesn't work, how did you access the bootloader?
Anyway yes, normally holding down and power on will take you to the bootloader, at which point you can select recovery. If your phone is currently off and the power button doesn't work, you have two options:
1. As andrew.cambridge suggested, plug the phone into the charger. That should bring up clockwork unless you have an off-mode charging version
2. Use ADB to send a recovery command from your computer
Theonew said:
It must be since the stock recovery is erased with CWM in order to be able to flash the rom.
Click to expand...
Click to collapse
Don't edit your post to say something completely different when you realize you were wrong. At least use strikethrough and add the correction.
sorry what is strikethrough? what should i have done? i can get my phone on by plugging charger in then putting battery in but it goes into the bootloader i think but it has an option for recovery but i cant select it
What you need to do is turn off the phone completely (do a battery pull or whatever you do to turn it all the way off). When off, put the battery back in (if it is not in already). Then plug your phone into the wall charger while it is STILL OFF. This should prompt it to go into ClockworkMod Recovery (CWM).
I would redownload your whatever ROM you are planning to use and the correlating version of gapps (Google Apps) to your computer. Unplug your USB from the wall charger and plug it into your computer. In CWM, use the trackball to go to the mounts and storage option and press the trackball to select, then go down to the mount USB tab and click it. This will mount your SD card to your computer. You can then transfer the zip files of your newly downloaded ROM and Gapps to your phone. Once finished transferring, click the mount USB option again to unmount it from the computer. Then you need to click go back.
Now you need to do a full wipe. Click wipe data/factory reset then yes. Once done, click wipe cache partition, then yes. Once done, click on mounts and storage and you need to click format system, then yes. Once done, click format data, then yes. Once done, click format cache, then yes. Once done, click format sd-ext (if it exists), then yes.
Now you need to install your ROM and gapps. Click install zip from sdcard and navigate to your ROM zip file, click it, then yes. Once done, do the same for your gapps zip file.
Now you need to click the reboot system now button. It will take a little bit for it to boot, so give it plenty of time. This should get you back on your feet.
morgs640 said:
sorry what is strikethrough? what should i have done? i can get my phone on by plugging charger in then putting battery in but it goes into the bootloader i think but it has an option for recovery but i cant select it
Click to expand...
Click to collapse
Also, STAria was referring to the user Theonew, with regards to the strikethrough and add correction statement.
Thanks for your reply, No luck with that unfortunately when i do that nothing happens. If i plug the charger in then put the battery in the phone turns on but just goes to the cyanogen screen and stays there
Sent from my MB525 using Tapatalk
morgs640 said:
Thanks for your reply, No luck with that unfortunately when i do that nothing happens. If i plug the charger in then put the battery in the phone turns on but just goes to the cyanogen screen and stays there
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Which "CyanogenMod Screen" are you talking about?
The one with the the arrow going
Around where it loads into it normally but thats where it gets stuck
Sent from my MB525 using Tapatalk
morgs640 said:
The one with the the arrow going
Around where it loads into it normally but thats where it gets stuck
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
That's the bootanimation. Have you tried letting it sit there for like 10 minutes?
Does it ever actually boot into CM7?
Ok. Try connecting your phone to your computer and use ADB to boot your phone into recovery.
morgs640 said:
The one with the the arrow going
Around where it loads into it normally but thats where it gets stuck
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
When you say it gets stuck, do you mean that the arrow stops moving and it just stays there or the animation just keeps going and CM7 never actually loads out? Anyways, this happened to me before and all I had to do was a full wipe/reset and reflash the rom. Everything went well after that. Did you follow ALL the instructions given in post #11? This should have fixed the problem.
it stays on that screen forever if i let it, also all i get is cannot find device when i try and adb into it. What state does your phone need to be in to use adb?
Do you have the phone drivers installed on your computer?
Sent from my Aria using XDA Premium App
So I accidentally made my Photon boot into a black screen with my CWM options all in white letters. At the bottom it says "Cold booting Linux". I cannot select any options to go into Android recovery. Any one ever see/hear of this and if so, how do I fix it. Thanks in advance.
Sent from my MB855 using xda premium
I should also add that every time I select android recovery, all of my options reload themselves and OS boot in 5 seconds appears.
Sent from my MB855 using xda premium
thomasmatt25 said:
So I accidentally made my Photon boot into a black screen with my CWM options all in white letters. At the bottom it says "Cold booting Linux". I cannot select any options to go into Android recovery. Any one ever see/hear of this and if so, how do I fix it. Thanks in advance.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
You need to reinstall your recovery.. Via fastboot or bootstrap. One of those two should def work. Worst case scenario is a SBF back to stock, I had that issue and sbf'd instead of trying recovery install.. was stupid..
Edit : Nevermind. It does look like you need to fastboot flash recovery. Should only take a few minutes to do.
Mine does the same thing. When the phone first boots you have 5 seconds to toggle. Press the down volume button until it says recovery. Then volume up to select it. No need to flash recovery unless you miss the M bootlogo.
I got to this mode by partitioning emmc or something like that. I got into the partition menu in CWM and there was no go back option. It was an accident for sure, but hasn't affected operations. I just don't have the M while booting.
Sent from my MoPho. All typos are the phones fault.
atroph said:
Edit : Nevermind. It does look like you need to fastboot flash recovery. Should only take a few minutes to do.
Mine does the same thing. When the phone first boots you have 5 seconds to toggle. Press the down volume button until it says recovery. Then volume up to select it. No need to flash recovery unless you miss the M bootlogo.
I got to this mode by partitioning emmc or something like that. I got into the partition menu in CWM and there was no go back option. It was an accident for sure, but hasn't affected operations. I just don't have the M while booting.
Sent from my MoPho. All typos are the phones fault.
Click to expand...
Click to collapse
That is the same thin I get, however I cannot go into CWM. When I select it, it just reboots that menu. When I get back home today, I'm gonna install CWM like its my first time again. Thus time I can choose another color other then orange.
Sent from my MB855 using xda premium
I need to flash a new rom, i was using MIUI but my phone is now stuck on the torch screen (even after pulling batter, it goes right back to torch). My issue is that i can flash a new rom or load a nanodroid because my volume rocker does not work. I can get into CWM through the power options on the phone but i can navigate inside CWM. Anyone have any suggestions?
kyleallen5000 said:
I need to flash a new rom, i was using MIUI but my phone is now stuck on the torch screen (even after pulling batter, it goes right back to torch). My issue is that i can flash a new rom or load a nanodroid because my volume rocker does not work. I can get into CWM through the power options on the phone but i can navigate inside CWM. Anyone have any suggestions?
Click to expand...
Click to collapse
You could try flashing cwm touch recovery
Sent from my MB860 running Jokersax's CM9
I have heard of that, but is there a way to flash it without getting into rom manager? As soon as my phone turns on it is stuck on the flash light app screen. I can hold the power down and get the power wheel but thats about it.
If you can access fastboot you could flash the recovery with fastboot.
Sent from my MB860 running Jokersax's CM9
The only two ways I know to get into fast boot are through the startup of the atrix using volume rocker(which i cant do). And using the power wheel, unfortunately MIUI doesn't have the option for fastboot in it's power wheel. Thanks in advanced for any help you provide.
Wow, you are kind of stuck here dude. What about trying with ADB? Im no ADB expert. but there may be a "reboot fastboot" command.
Yeah it sucks, i have never touched adb before. But i was thinking, there has to be a way to control CWM from adb. If someone could point me in the right direction that would be great.
kyleallen5000 said:
Yeah it sucks, i have never touched adb before. But i was thinking, there has to be a way to control CWM from adb. If someone could point me in the right direction that would be great.
Click to expand...
Click to collapse
Here's a site which installs touch recovery using adb. Hope this works.
Whoops forgot the link: http://www.addictivetips.com/mobile/install-clockworkmod-recovery-touch-on-motorola-atrix-4g-how-to/
Sent from my MB860 running Jokersax's CM9
thank you man, i fixed it by having a friend call me. but i will still install it.
Easy. Inside the newest romracer cwm use menu key for down, home key for up, back for back, and search for select.
Sent from my MB860 using XDA
please help, what can i do?
is the green- hardware or software related? i dont think i banged it or got hit..
new-to-it said:
please help, what can i do?
is the green- hardware or software related? i dont think i banged it or got hit..
Click to expand...
Click to collapse
I know you will be loosing everything, well unless you have a backup. I would suggest NVflash back to stock with CWM recovery. Then reload the ROM of choice to see or even just boot it into TapUI so see if the problem is Hardware related or UI related. It is tough to say.
i think its hardware, i gave it a nice hard wack and it seems ok...
the thing is i started to save/backup and go back to tap tap. thinking ill use my warrantee,
now it is stuck in a boot mode, turns on, starts to run but only getting to the tap embelm. it does this over and over maybe 6 second intervals..
any ideas??
i cannot get to cwm, and reload gtab or do anything. am i screwed??
new-to-it said:
i think its hardware, i gave it a nice hard wack and it seems ok...
the thing is i started to save/backup and go back to tap tap. thinking ill use my warrantee,
now it is stuck in a boot mode, turns on, starts to run but only getting to the tap embelm. it does this over and over maybe 6 second intervals..
any ideas??
i cannot get to cwm, and reload gtab or do anything. am i screwed??
Click to expand...
Click to collapse
Try NVflashing with the stock 1.1 BL with recovery ver.8 preinstalled, after done power device off by holding down power button. The just boot straight to recovery and do a data wipe factory reset then reboot system. The reason for the boot loop is there is still something on the name that the tnt software doesn't like. After you get it booted up then advice just NVflash 1.1 stock with stock recovery and it should boot right up afterwards. The reason for the 2nd nvflash is to remove any tracef the customs recovery.
Sent from my SGH-T989 using xda app-developers app
ok i think i got it.....
new-to-it said:
ok i think i got it.....
Click to expand...
Click to collapse
Sounds like that you are using the NVflash with Stock recovery. When you hold down volume + and press the power button it is booting into stock recovery hence the triangle symbol. You need to get a fresh NVflash setup that includes CWM recovery and use it.
Sent from The Darkside via Me...