I am not a noob and have flashed hundreds of time so please refrain from posting without helping.
I have searched a lot but could not find any similar thread.
So I am posting here.
I have inadvertently flagged "re-partition" when flashing an official Rom with Odin and now when trying to flash any different Rom I can't go through the entire process - same thing when trying to flash some clockworkmod recovery.
Error is like in the image that I am posting here.
No way to have some other remedy.
Could you help me please?
since you flashed official rom, you may need to root it from the beginning. did you try this?
well i will call you a noob cause you posted this question in the wrong section...next time post it in the Q&A section..that is why it is there for....
Matriak31 said:
well i will call you a noob cause you posted this question in the wrong section...next time post it in the Q&A section..that is why it is there for....
Click to expand...
Click to collapse
+10 char
but to give you a little hint (eventhough everyone is going to hate me cause i answered and even made an attempt to help) look for roms which are MADE to be flashed WITH repartition enabled (you will need a pit file as well). also: your phone aint rooted. root it via odin and then have a look.
@mods: please delete thread
ok hard reset the phone by going into the Samsung recovery i think its volume up + power + home, but Google the hard reset procedure or YouTube it, after hard resetting root it and it should be ok, hope this helps, all the best.
Sent from my GT-I9100 using XDA App
I have the same problem here...
Enviado desde mi GT-I9100 usando Tapatalk
Matriak31 said:
well i will call you a noob cause you posted this question in the wrong section...next time post it in the Q&A section..that is why it is there for....
Click to expand...
Click to collapse
Sometimes people just make it easy dont they....!!
lol
I had this same problem the other day, I made a video walk through. Hope it helps.
http://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Sent from my Insanity powered SGS2
Darkside Agent said:
Sometimes people just make it easy dont they....!!
lol
Click to expand...
Click to collapse
exactly...im all for helping people out even if the question has been asked so many times but bloody get your question in the right forum.... and then he says dont call him a noob silly boy
Get firmware, get .pit file for Galaxy S2 use Odin with .pit and repartition enabled to flash the firmware.
Actually, you don't really need a *.pit file, you can also use a Sbl.bin file.
You aren't really using an official rom, more like someone's dump of an official rom. It might be missing stuff, or have stuff added.
Official ROM contents: (Inside the *.tar file)
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
Sbl.bin
zImage
It seems that the partitions are all gone, therefore your phone is unable to mount partitions that are already gone. Fortunately, your bootloader is still working which is why you are able to access your download mode, and somehow still able to access your recovery, which is probably written into the only intact partition.
Download an OFFICIAL ROM with a *.pit or Sbl.bin file which contains the partition information, and then use ODIN to flash again.
Your EFS might be missing as well, so the modem might not be able to work. Modem is the one that controls your phone calls and data through GSM/WCDMA.
Use Fus Downloader 2.0 and download the latest FULL OFFICIAL ROM for your phone, then flash and repartition your phone.
Now that I have helped...
YOU ARE A NOOB!!!
unzip u1_02_20110310_emmc_EXT4.zip
use odin,click pit select u1_02_20110310_emmc_EXT4.pit,click start
antiochasylum said:
I had this same problem the other day, I made a video walk through. Hope it helps.
http://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Sent from my Insanity powered SGS2
Click to expand...
Click to collapse
Dude this video is legendary! Muahhahahaha
Sent from my GT-I9100 using Tapatalk
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Related
hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
slippery_gypsy said:
hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
Click to expand...
Click to collapse
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
So you're stuck on the boot screen, and you haven't been able to find any other posts to help you out.... except the HUGE pinned one on the top of the forums
[READ THIS] Got a Boot Loop? Don't post a New Thread! ... yeah, okay, makes sense!
thanks thesaw. but the ones i were able to find assumed that people had ClockWorkMod which i didnt have
slippery_gypsy said:
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
Click to expand...
Click to collapse
Gr8 to hear
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
System of a pWne!^ said:
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
Click to expand...
Click to collapse
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Im honestly glad you guys know what your talking about
Sent from my GT-I9100 using xda premium
System of a pWne!^ said:
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Click to expand...
Click to collapse
The .pit file is only needed by three-file-combo.
Then you can check also the repartition.
If you have one file .tar, the .pit-file is senseless and never should check repartition.
Sure in one file you have nearly the same "files" like in three, but in three-file they can be written separatly on right partition.
Mates don't get me wrong but just accept it
I'm not a dev or scripter but but flashed a lot.
Never bricked my phone but often hanging in bootloop and so on.
And like you see the way with re-partition can help.
I Never flashed a stock Rom since I had my SGS II, but like I said I'm flashing a lot and I had the SGS before, too
Hope all question are answered.
If not pls ask devs for more info.
But that's the general things I can tell you
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Intratech said:
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Click to expand...
Click to collapse
1) Right, he damaged it so he needed it.
2) No you shouldn't use it by one file flash!
Read threads and experiences from users which have probs after flashing like this if at all possible to flash.
But however I don't wanna say anybody how to flash.
That's my and also a lot of other user experience
CHEERS
Sent from my GT-I9100 using XDA App
Can't seem to find a link to download the stock rom for the US 5.0 Galaxy Player. I flashed a new rom thinking I did a CWM backup, but apparently I only thought I did.
I've searched around and can't seem to find an ODIN tar or a ZIP that I can flash for the US version other than a file hosted on Multiupload which no longer works. I didn't post in general being that this seems more Development related.
If anyone can help me out I'd appreciate it.
....................
EDIT: It was a pain to find, but I found the multiupload link, googled it, found the cached page, found the name of the file, googled the name of the file and downloaded from fileserve. I then uploaded to my server. You can download it from there if anyone needs it.
DOWNLOAD: http://timcordova.com/iamtimmah/android/YP-G70_UEKI8_MIN.rar
Found it. Posted mirror in first post.
Thank you for finding it. I would like to ask you if you have tried it already.
I don't flash custom ROMs because
until now, I didn't have a stock recovery ROM to restore in case something goes wrong or I didn't like the new ROM. And I don't think Best Buy would want to replace a device with a cracked screen if custom software is installed.
Please, let me know.
Thank you in advance.
Sent from my YP-G70
SirRhor said:
Thank you for finding it. I would like to ask you if you have tried it already.
I don't flash custom ROMs because
until now, I didn't have a stock recovery ROM to restore in case something goes wrong or I didn't like the new ROM. And I don't think Best Buy would want to replace a device with a cracked screen if custom software is installed.
Please, let me know.
Thank you in advance.
Sent from my YP-G70
Click to expand...
Click to collapse
I have tried it. I just flashed back to stock. I had to Wipe data via CWM before flashing back. On the first boot it took me to Stock recovery where I wiped data and wiped the cache. It's now working perfect.
As far as I know there seems to only be one custom rom for the US 5.0. Various kernels to try though.
So, in case I just want to restore to stock with the file you made available, I need to have a custom kernel so I can use CWM?, or I can do it from the stock recovery window?.
And the only two options to flash a kernel and a ROM I see for the SGP 5.0 are "Entropy's Daily Driver" and "Eryigit-GB-2.3.6 G70ZCKPA ROM", have you found other options?
Thank you.
@iamtimmah
do i need to flash the pit file or just the pda will do
and if the pit is needed then what are the flash instructions
akashsgpgi said:
@iamtimmah
do i need to flash the pit file or just the pda will do
and if the pit is needed then what are the flash instructions
Click to expand...
Click to collapse
The pit is included in the file.
i was asking whether we need to flash only pda file or both pda and pit files in odin
akashsgpgi said:
i was asking whether we need to flash only pda file or both pda and pit files in odin
Click to expand...
Click to collapse
Normally you only need to flash the pda, but if you want to re-partition your device then use the pit file as well.
RValentinF said:
Normally you only need to flash the pda, but if you want to re-partition your device then use the pit file as well.
Click to expand...
Click to collapse
ya i know that ..but if i flash the pit then how do i go back into download mode as we do not have removable battery
akashsgpgi said:
ya i know that ..but if i flash the pit then how do i go back into download mode as we do not have removable battery
Click to expand...
Click to collapse
When you turn it off just hold the volume down button before turning it on and you should get there in a couple of seconds.
after flashing i got bootloops, but i did factory reset and wipe partion cache , and it worked well
wow this rom is pre rooted
can some1 tell me the step by step procedure?
ken2kold said:
can some1 tell me the step by step procedure?
Click to expand...
Click to collapse
Welcome to the Dev section for the Galaxy Player. This is for development, not for installation help. You should be able to ask in General.
Flashing ROMs can be scary at first, but the Dev board is best left for software development, feedback, etc. It makes it easier for the Devs not to have to wade through a field of nonsense.
tl;dr:
Post questions in General, not in Dev. It's a common mistake, don't worry too much.
I just want it to be as if it just came in a box because I'm selling it, how do I have it stock and unrooted?
tradeJmark said:
I just want it to be as if it just came in a box because I'm selling it, how do I have it stock and unrooted?
Click to expand...
Click to collapse
Flash the stock rom found here via Odin3 and if it is rooted, download Root Browser from play store and and delete superuser.apk in system/app and delete su binary in system/bin and after you delete these two, reboot and uninstall root browser and you should be good.
Sent from my YP-G70 using xda app-developers app
I keep going into a bootloop and it wont shut off. What do i do?
Edit: I fixed it
What did you do to fix the bootloop?
Can someone please miror this? I get stuck on the download with greatly increasing time left. will greatly appreaciate it
nevermind i'll use gmillz's
Rom doesn't work.
Hello all,
Something went seriously wrong when installing custom mod on my SG3 => bricked
What's the status:
*unable to get in recovery modus
*able to get in download modus
*when I want to install another mod within odin it doesn't do anything, it completes installing in 1 second
it actually stops @ <ID:0/006> NAND Write Start!!
I can wait for hours and it just stops @ this step...:crying:
Anyone of you have any ideas as I'm running out of options..
Thank you for your help!
give all steps that u had perfrom at the time of flashing so that members can help u out
Sent from my GT-I9300 using xda premium
hisee said:
give all steps that u had perfrom at the time of flashing so that members can help u out
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
* installed CWM
* installed the cyanogen ROM
* installed font installer => rebooted => crashed (stuck on samsung screen)
* cleared data/cache in recovery modus
* tried to install stock ROM => stuck on samsung screen
* added pit file (read on the forum that it could help on bricked phones) , stock ROM and flashed with Odin
final result: no recovery modus, only download modus and unable to flash anything with Odin
If you can get to download mode you should certainly be able to flash with odin. That is download mode's sole purpose and afaik it is not affected by any rom installations.
Sent from my GT-I9300 using xda premium
Oh wait, you flashed a .pit file?
It was probably the wrong file. You should not have done that. Its pretty certain that is the cause.
Sent from my GT-I9300 using xda premium
odin is detecting ur fone when u r in diwnlaoad mode?
Sent from my GT-I9300 using xda premium
thanks for the feedback
the phone is recognized in Odin
I also think that the pit file messed it up (pit file was the one suggested for the SG3 => GT-I9300_mx_20120220.pit)
when installing PDA file via Odin it stops @ <ID:0/006> NAND Write Start!!
on the phone
status balk on phone is completed but not rebooting (it actually does nothing in Odin I guess)
Why don`t you read BEFORE you flash anything instead of AFTERWARDS
BUT I GUESS ANYTHING IS POSSIBLE IF YOU ARE NOT LIMITED BY ANY KNOWLEDGE.
You did it to yourself.
Boot into odin and flash a complete stock rom with NO pit file. Follow the instructions provided on these forums for returning to stock.
Never ever flash a pit again.
Sent from my GT-I9300 using xda premium
hefonthefjords said:
Boot into odin and flash a complete stock rom with NO pit file. Follow the instructions provided on these forums for returning to stock.
Never ever flash a pit again.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Already tried this but it keeps getting stuck on this part
<ID:0/006> NAND Write Start!!
so basically I'm unable to flash the phone to stock ROM
tricid79 said:
Already tried this but it keeps getting stuck on this part
<ID:0/006> NAND Write Start!!
so basically I'm unable to flash the phone to stock ROM
Click to expand...
Click to collapse
That's what u get for NOT reading
Sent from my SGH-T989 using xda app-developers app
gee2012 said:
Why don`t you read BEFORE you flash anything instead of AFTERWARDS
BUT I GUESS ANYTHING IS POSSIBLE IF YOU ARE NOT LIMITED BY ANY KNOWLEDGE.
You did it to yourself.
Click to expand...
Click to collapse
That's nice... especially considering your signature
don't want to be harsh but if you don't have any other remarks than you should have read, it's your own fault, etc...please don't spoil your energy in my topic than...
I know I did something wrong that is why I ask for help in the first place!
tricid79 said:
don't want to be harsh but if you don't have any other remarks than you should have read, it's your own fault, etc...please don't spoil your energy in my topic than...
I know I did something wrong that is why I ask for help in the first place!
Click to expand...
Click to collapse
The point is that you should not flash anything if you don`t know the procedure and what to do exactly.
I hate what has happened to you but you could have prevented this mess you`re in if you were informed!
I think he realises now guys, come on give the guy a break, he's made a mistake that could be costly and easily avoided, but now he's trying to resolve it....Help him out...because I bet he is really [email protected]#ting himself
In a german board this problem got solved by flashing with the right pit file (and a 3-part firmware).
They said, "mx.pit" or "GT-I9300_mx_20120329.pit" should work.
HERE you get the files.
Unfortunately the original poster was not very specified with reporting which he had flashed, but he said it flashed.
Another one pointed out, that you need a 3-part firmware when flashing with repartition. Is that the case? I don't know.
EDIT: It can be that the solution wasn't the correct pit file, but only the 3-part firmware. Maybe try to flash a 3-part firmware first without repartition.
Best Regards
Rob
Rob2222 said:
In a german board this problem got solved by flashing with the right pit file (and a 3-part firmware).
They said, "mx.pit" or "GT-I9300_mx_20120329.pit" should work.
HERE you get the files.
Unfortunately the original poster was not very specified with reporting which he had flashed, but he said it flashed.
Another one pointed out, that you need a 3-part firmware when flashing with repartition. Is that the case? I don't know.
EDIT: It can be that the solution wasn't the correct pit file, but only the 3-part firmware. Maybe try to flash a 3-part firmware first without repartition.
Best Regards
Rob
Click to expand...
Click to collapse
great info Rob!
I used the GT-I9300_mx_20120329.pit file now and I'm again able to flash via odin + see my recovery modus as well...
Just looking for the correct stock ROM for Belgium right now...
flashing other ROM's are resulting in Samsung logo loops even after clearing cache and clearing data/factory reset
tricid79 said:
great info Rob!
I used the GT-I9300_mx_20120329.pit file now and I'm again able to flash via odin + see my recovery modus as well...
Just looking for the correct stock ROM for Belgium right now...
flashing other ROM's are resulting in Samsung logo loops even after clearing cache and clearing data/factory reset
Click to expand...
Click to collapse
flashing other ROM's are resulting in Samsung logo loops ???/
hisee said:
flashing other ROM's are resulting in Samsung logo loops ???/
Click to expand...
Click to collapse
every ROM is resulting in samsung loops in fact...
cleaned cache/data before flashing...
tried to install cyanogen via zip on external sd and it stops after a few seconds and reboots...
This is pretty strange. You should be able to flash any of the international roms and have it work as they are interchangeable.
When you run the cyanogen zip is it throwing up an error or just flat resetting?
Tried redownloading the zip or using a different nightly?
Sent from my GT-I9300 using xda premium
YES, I KNOW THAT ALL QUESTIONS GO IN THE Q&A FORUMS BUT ITS HERE TO GET THE DEVELOPERS. SINCE I HAVEN'T FOUND ANY PERSON THAT CAN HANDLE SUCH SITUATION. (Please read ahead to take note of the problem clearly)
Please think of this as to help me (and other people who made these dead like this one). Don't comment "Questions go in the Q&A forum you friggin' NOOB". I know all of this stuff!!!!!
How it happened??:-
Rooted the phone using CF Root 6.4. Working "Perfectly"!
Did an OTA update (0.17MB) accidently. Encountered Random Reboots after then.
Then it won't boot at all
Stuck at the "GT-i9300" logo.
I HAVE THE NANDROID BACKUP BUT WON'T GO INTO THE RECOVERY SO ITS USELESS (is there any way to do it without the Recovery??)
Current situation:-
No Recovery. Tried Re-flashing the Official ROM and Re-rooting it. Either doesn't shows up or when shows up stays for 2 seconds and then goes to the GT-i9300 Logo.
Download mode is PRESENT.
Charges with NO PROBLEMS. Shows the Battery Logo going up and the Blue LED comes on too.
It once gave an error saying : "E:failed to verify whole-file signature
E:signature verification failed
Installation aborted."
It also gave a similar one in the above but with some other error. I didn't noticed it.
Odin Flashes WITHOUT any errors(no errors within the Odin). Writes the Firmware completely but unable to proceed due to some unknown reason.
I have tried these:-
Changed the NAND Memory Chip. Still the exact same problem. (Partition problem or something?)
J-Tagged it. No use!
Flashed all the Official ROMs via Odin.
Re-Rooted it. No use. Recovery isn't stable. Keeps rebooting after 2 seconds to the GT-i9300 Logo.
Please take this Question very seriously. Since its not just me with the same problem. There are many many other people with the same problem and with no solutions. Isn't this the main reason of XDA-Developer? Or is it just ROMs, Themes or Kernels? A person would be more happy if he gets his/her phone repaired instead of lying there on the desk and keeping those papers in there place and stop them being blown away from the fan!
For the moderators:- I know this isn't in the rules of the XDA to post a Question in the Android Development Section but this is here to summon all the ROM Developers and the Kernel Tweakers. Thank You for your valuable time!
Flash FULL ICS rom with .pit file
AusafSal said:
YES, I KNOW THAT ALL QUESTIONS GO IN THE Q&A FORUMS BUT ITS HERE TO GET THE DEVELOPERS. SINCE I HAVEN'T FOUND ANY PERSON THAT CAN HANDLE SUCH SITUATION. (Please read ahead to take note of the problem clearly)
Please think of this as to help me (and other people who made these dead like this one). Don't comment "Questions go in the Q&A forum you friggin' NOOB". I know all of this stuff!!!!!
How it happened??:-
Rooted the phone using CF Root 6.4. Working "Perfectly"!
Did an OTA update (0.17MB) accidently. Encountered Random Reboots after then.
Then it won't boot at all
Stuck at the "GT-i9300" logo.
I HAVE THE NANDROID BACKUP BUT WON'T GO INTO THE RECOVERY SO ITS USELESS (is there any way to do it without the Recovery??)
Current situation:-
No Recovery. Tried Re-flashing the Official ROM and Re-rooting it. Either doesn't shows up or when shows up stays for 2 seconds and then goes to the GT-i9300 Logo.
Download mode is PRESENT.
Charges with NO PROBLEMS. Shows the Battery Logo going up and the Blue LED comes on too.
It once gave an error saying : "E:failed to verify whole-file signature
E:signature verification failed
Installation aborted."
It also gave a similar one in the above but with some other error. I didn't noticed it.
Odin Flashes WITHOUT any errors(no errors within the Odin). Writes the Firmware completely but unable to proceed due to some unknown reason.
I have tried these:-
Changed the NAND Memory Chip. Still the exact same problem. (Partition problem or something?)
J-Tagged it. No use!
Flashed all the Official ROMs via Odin.
Re-Rooted it. No use. Recovery isn't stable. Keeps rebooting after 2 seconds to the GT-i9300 Logo.
Please take this Question very seriously. Since its not just me with the same problem. There are many many other people with the same problem and with no solutions. Isn't this the main reason of XDA-Developer? Or is it just ROMs, Themes or Kernels? A person would be more happy if he gets his/her phone repaired instead of lying there on the desk and keeping those papers in there place and stop them being blown away from the fan!
For the moderators:- I know this isn't in the rules of the XDA to post a Question in the Android Development Section but this is here to summon all the ROM Developers and the Kernel Tweakers. Thank You for your valuable time!
Click to expand...
Click to collapse
Download *.tar file from sammobile. As you have download option live, you can flash the same with help of Odin (for ICS)
Flash A Stock ICS ROM with Odin.
Get them from Sammobile or from a thread with stock rom collections.
Even get an Galaxy S3 .pit file for odin.
That will fix it.
Just to keep you happy, Most Samsung Devices are unbrickable. As long as it boots, even if its in bootloop it can get fixed with odin.
Keep us updated.
Sorry, even questions like this go into the Q&A, that's where the devs are, aswell..
Anyway, go to this website and create an account.
Download latest JB/ICS ROM and get a .pit file. Open Odin and flash away..
Done, your phone is working again..
Moved to Q/A, there is no reason to post this in the development section.
That is the problem!! No one in the Q&A section answered like u guys have :/
All I get told was "give it to the Service Center".
Anyway! Which PIT file should I flash. A Procedure would be nice. My Last firmware was 4.0.4 don't know the number.
Ohk so I found it from the Nandroid Backup. It was I9300XXBLG8 I also found something written as IMM76D
But this was before the OTA update. Can someone tell me about the .pit file for it?
Which .pit file should I use?
bump?
AusafSal said:
bump?
Click to expand...
Click to collapse
Changed the NAND Memory Chip how have you changed on board components .
Isn't this the main reason of XDA-Developer?
Nope its not a fix my phone forum .
JJEgan said:
Changed the NAND Memory Chip how have you changed on board components .
Isn't this the main reason of XDA-Developer?
Nope its not a fix my phone forum .
Click to expand...
Click to collapse
I gave it to a person here in the phone market. He also J-tags it. He had a spare broken motherboard. he changed the NAND Flash Memory Unit by himself. He said it is in the same condition as it was before. So no problem to the NAND Flash Memory Unit is done.
Suggest that you join sammobile as posted and use stock firmware .
Sammobile has a forum and you may get more information regarding a PIT file there .
jje
JJEgan said:
Suggest that you join sammobile as posted and use stock firmware .
Sammobile has a forum and you may get more information regarding a PIT file there .
jje
Click to expand...
Click to collapse
Hey! I didn't noticed its JJE!
I remembered u helped me alot in the previous Threads I made!
I downloaded the U.K version. Which is the one I had according to the Nandroid Backup I made.
I opened the "system.ext4.tar" by WinZip.
Saw a CSCVersion.txt file.
It had written "I9300OXABLG8" on it.
Also in the "build.prop" file (Opened by Notepad) I saw I9300XXBLG8 written aswell.
So I downloaded that one.
So I have only one Question:
Which PIT File should I put? :/
I see 5 of them :-
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
Which one?
should be the last one...
Why don't you just spare yourself numerous headaches by sending the phone in for repair? Just say it died on you or something.
Theshawty said:
Why don't you just spare yourself numerous headaches by sending the phone in for repair? Just say it died on you or something.
Click to expand...
Click to collapse
No warranty bro! And I'll try tomorrow
btw If I do a wrong pit file. what are the consequences? :/
Mine is the 16GB one of United Kingdom. Non-Branded GT-i9300
AusafSal said:
No warranty bro! And I'll try tomorrow
btw If I do a wrong pit file. what are the consequences? :/
Mine is the 16GB one of United Kingdom. Non-Branded GT-i9300
Click to expand...
Click to collapse
Anyone??
AusafSal said:
Anyone??
Click to expand...
Click to collapse
Wrong Pit possible brick .
jje
AusafSal said:
No warranty bro! And I'll try tomorrow
btw If I do a wrong pit file. what are the consequences? :/
Mine is the 16GB one of United Kingdom. Non-Branded GT-i9300
Click to expand...
Click to collapse
If you flash the wrong pit file or if the pit file fails to flash, you might destroy your nand memory. The pit file is the partition table, hence you should be very careful.
Theshawty said:
If you flash the wrong pit file or if the pit file fails to flash, you might destroy your nand memory. The pit file is the partition table, hence you should be very careful.
Click to expand...
Click to collapse
Ok so Im gonna give it to the Samsung Service Center first thing. I don't wanna completely Eff up my device :/
Gonna take the phone from the person I gave to and hope to God that the NAND change has made that flash counter to Zero :/
ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Rookie407 said:
ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Click to expand...
Click to collapse
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Just plug it into KIES and restore to stock, root then install your custom rom.
Rookie407 said:
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Click to expand...
Click to collapse
in General Forums / Super Everything Thread
you did not list your carrier or device in your post, but there is a whole list of options here. I have myself scanned through list and yes am aware many of links are dead, yet this was the 2nd one I checked.
if this is for your device and what you are looking for then you are ready to go.
here is the thread containing the file, first link is up
http://forum.xda-developers.com/showthread.php?t=2261598
if not, check the last post in this thread. you will find a link provided from "developweb", see if that is what you are looking for, be sure to hit his thanks button. I am not going to send one of my files, again simply, because you have not told anyone device or carrier. you have already flashed wrong file once and I don't know how, but I don't want to be responsible for anyone bricking their device.
you have been a member long enough to know what information folks need and long enough to know to read. if you can provide this information, then maybe I can help you further if needed.
good luck and keep us posted
jayinc11 said:
Just plug it into KIES and restore to stock, root then install your custom rom.
Click to expand...
Click to collapse
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Rookie407 said:
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Click to expand...
Click to collapse
Got you. Well there's a bunch of modems here but you will have to decide your own course. I can't offer any advice on them. Good luck!
Version: 4.1.2
Date: 2013-03-31
PDA: I717UCMD3
CSC: I717ATTMD3
PHONE:I717UCMD3
URL: http://terafile.co/71641c73615e/I717UCMD3_I717ATTMD3_ATT.zip