soo when i plug my phone to connect to my desktop it says it isn't recognized with a code error 43. It wouldn't install the phone and it won't charge while it is plugged in. and when i used my wall plug to try to charge my phone from there it still didn't work. help?
What did you do to make the phone un-responsive?
Sent from my SGH-T959 using xda premium
well it all started as i was upgrading my psu from my desktop and i guess the usb port was loose and when my desktop was put back together the usb i believe wasnt charging and i didn't notice at that time so i left it plugged with my microusb. i come back from eating finding my phone to be really hot like insanely hot and it wont turn on at all ! then i researched and found this thread to put it in download mode and so i did. but somehow i got stuck at the download mode, so i had this crazy idea that if i removed the driver .. it might work and it would install it's software like normal.. i guessed wrong. i turned off my phone since i didnt want to waste batteries. after removing the the driver i noticed that i cant charge my phone at all .. like i have two different chargers and both didnt work, the microusb and wallplug w/o the usb. now my computer won't recognize my device and won't even install at all
I think I just had an aneurysm.
Ow.
Related
everything was fine till now with the charger,lately i have this strange charging problem which goes like this..
previously when we connect the wall/usb charger charging used to start immediately but now it takes time..i need to wait for 45 seconds then the light appears..??
previosly it used to attain 100% charge quickly..but now its slogging??i mean very slow trust me...
responds late to the power n then slow charge??????????????
its the same even when i try with usb and the worst part is it doesn even detect usb connection but charge at slow rate??
any ideas?thanks in advance!!
right now im on cobratos 2.3.4 awesome miui rom!!
So you are using APP2SDcard? You are going to have problems mounting it to USB, if the SDCard is already being used.
For the 45 second thing....I donno....do you have any Task Manager app where you can make sure you don't have like 10+ apps running? Check that. Turn all apps off and then try.
beau420 said:
So you are using APP2SDcard? You are going to have problems mounting it to USB, if the SDCard is already being used.
For the 45 second thing....I donno....do you have any Task Manager app where you can make sure you don't have like 10+ apps running? Check that. Turn all apps off and then try.
Click to expand...
Click to collapse
Noo im not using app2sd..the phone gets charged but not able to mount when connected thru usb????
Sent from my X10i using Tapatalk
Can you unmount the SDCard under Settings->SDCard and Phone Storage?
If you can unmount it....do that....then plug the phone into a computer (using the original USB cable that came with the phone)
And try using different USB ports or a different computer.
It not charging for 45 seconds after you plug it in would make me want to reflash and start from scratch again. Not a good sign.
That is probably what I would suggest next.
Will try with a different computer and let you no...
apart from 45 seconds delay even the charging process has become very slow:-(
Tried even with different usb ports and computer..no luck
Phones usb socket has gone I guess
nagrockz said:
Tried even with different usb ports and computer..no luck
Phones usb socket has gone I guess
Click to expand...
Click to collapse
Can the computer recognize the phone in flash mode?
If so, try flashing 2.1 with flashtool to fix the problem
Sent from my Atrix 4G with XDA Premium App
Not able to enter flash mode:-(
nagrockz said:
Not able to enter flash mode:-(
Click to expand...
Click to collapse
What about getting into xrecovery?
You could flash a different ROM with the baseband it matches.
Sent from my Atrix 4G with XDA Premium App
Yea could do that but still the problem persists
Have you tried changing the usb cable? I was convinced my usb port had gone, as it took ages to recognise the charger, and I often had to wiggle the cable where it was plugged into the phone to get it to start charging.
Then I left my cable at home and had to buy a cheap £1 blackberry charge cable from poundland to charge my phone at work - and all problems went away!
After checking the ends of both cables, it looks like the usb pins have become bent inside the small end of the usb cable (mini-usb end).
I'd doublecheck this before doing anything more drastic as it's a simple thing to overlook (well, I did!)
Yep tried with different cables too..i don't think its the problem of usb port too as there is a late recognition ..slow charging but no sd connection
I noticed this issue, where the Photon powers on by itself when i plug it into the computer via usb.
When the phone is off and plugged to the wall charger I get the battery charging image. But When the phone is off and plugged into the computer via usb, it powers on. Also With the usb plugged in and in charge only mode, when i perform a shutdown on the phone, it restarts right after completing shutdown.
I know this might now be a serious issue, and no one have probably come across it but same thing happened when it was connected to the PS3, i powered it off while it was on and connected to ps3 via usb and it powered back on. This could be some weird usb sending out signals trying to mount the sd card and in return it forces the phone to turn on, can someone please verify this on their phone, my brother has a photon i am gonna try this on his later tonight, just need to know it is on mine,
Well i confirmed with another Photon, it is the same issue, whenever it is plugged into a USB it turns on by itself, dont know if this happens with other phones, but it is weird
Harry_Spade said:
Well i confirmed with another Photon, it is the same issue, whenever it is plugged into a USB it turns on by itself, dont know if this happens with other phones, but it is weird
Click to expand...
Click to collapse
Same thing here and it is so annoying when I am just trying to charge it and it keeps booting back up.
does anyone know of a solution, i ll try playing around with it, may be something with usb debugging, highly doubt it though
Same here. I think it must be designed this way for some reason.
Does it turn on if the USB is set to 'Charge Only' mode? I think it turns on automatically by design in Phone Portal or Sync modes but it probably shouldn't in Charge Only mode.
Hi I have a Atrix 4G and I was charging it fine yesterday and then today I tried to plug the phone to my computer but phone is not detected and then again the charging doesn't work too. what should I do and did anyone have this problem before? and there's no problem with the data cable cause I checked it with another phone.Please help me with this.
have you tried a different USB cable and it charger box for wall outlet?
Sent from my Galaxy Nexus using xda premium
What ROM have you got installed? I had this problem with CM7-ICS-MOD2 rom, but I reinstalled the ROM and its fine.
I've also had problems with buying cheap USB cables that pass some voltage/current to the phone (so it shows charging icon) but somehow Windows won't recognise the phone... doesn't sound like your problem tho
I think it's not the rom, I think it's the cable and it's not a cheap cable thought it's the normal motorola cable,well what could I say **** happens and all my data's gone cause I thought it might be a problem with the rom. thanks all
I had the same problem with a different phone.. The problem is connection point on the phone especially if it's not charging.. So I'm not sure if that's a part that can be replaced or not.
Hey all. I figured it out, went out side and took a different cable and it worked fine. it was a cable problem.thanks all for supporting.I'm gonna get a new cable from Motorola.
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
When you plug in your phone, check if you see anything in device manager. Maybe you need to install drivers..
1chris89 said:
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
Click to expand...
Click to collapse
Windows doesn't have a clue no matter how many perfect cables I use. It works and connects perfectly and immediately over rsdlite. I have 5 known to be working fine in cm7 cables. It will show as charging over AC if I restart the phone and keep the usb cable plugged in. It says it's charging over ac and it doesn't detect it in Media portal or mass storage or anything. Nothing shows up. Why is it that rsdlite works perfectly. This makes me seem that the android OS is at fault. Right? Nothing shows up in Device Manager. Only when in rsd lite mode, it will detect the phone and it will show up in Device Manager.
it's been about 48 hours one a full battery and it'll still at like 80%. I need to charge my phone soon...
Maybe I'll re-flash in rsdlite again? I flashed all the sbf's for stock roms with the same result. Should I reinstall again?
thanks
Hi all, I just realized a problem with my Galaxy S2, when I charge it with my AC Adapter (the original one comes with the phone), the phone recognizes it as USB, it shows UTP (or UT... blah blah i don't remember, the same sign when you connect your phone to your laptop to copy file). Not only that, what disturbs me is that the charging current now is USB too, I didn't realize that 'cause I used to charge over-night. But now it has been charge for 4 hours and still not full yet, I download the "current widget" app and it shows exactly 451Mah , I checked on Extweaks's Misc Tab and nothing's wrong, I recheck and restart, calibrated battery, still doesn't work.
Who has the same problem with me and knows a solution? 'cause I can't wait for my phone 5 hours to charge in an afternoon like this
I'm using Checkrom Revo HD 6 (2.3.6), Siyah lastest ver for GB, I don't install anything involved battery or scripts or internal tweaks 'cause I'm no pro
P/s: Sorry for my clumsy English
First of all you should try another charger. If the charger is reported as USB device it is probably defective (at least the short between the USB data lines seems to be missing). The slow charging of the phone is just the consequence of the charger not being detected as such.
I think there is no use changing something on your phone as long as the charger is reported as USB device.
May also be worth checking the USB port is fairly clean? Some GS2's (including mine) have required a new USB port due to false reporting of USB status, e.g. charging symbol without actually being plugged in. Hope you are not in this category!
Good luck
Thanks All, first I dont think the adaptor is defective, 'cause if it broke down, it would not be able to charge at all, in this case it shows exactly the usb voltage charge, it.makes me think it's the fault of the phone.
And I think cleaning the port is a nice idea I havent tried, I'll do it and tell the result latet
Sent from my GT-I9100 using XDA
randomseasons said:
And I think cleaning the port is a nice idea I havent tried, I'll do it and tell the result latet
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
So what was the result after all?
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
mikenexus said:
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
Click to expand...
Click to collapse
IF you mean that it doesn't charge while the screen is on and connected to the PC, that's normal behavior... the current draw is too much for the USB port to maintain the operational draw as well as provide any extra to charge it. Most of the time, you'll notice that you're actually still losing charge even though it's plugged into the PC... albeit at a much slower rate than usual.
As far as it not being recognized... what do you mean? You don't get the drives mounted? It's not being recognized by ADB? There's plenty of threads related to ADB, try giving it a search. If you mean that the drives aren't being recognized, you have to have a SD card in and turn on USB Sharing (or whatever it's actually called) it should be in the notification area.
Thanks for the reply,
It does not charge from an outlet while powered on; only when powered off.
What I mean in regards to it not showing up on the PC: I plug it in and it does not even recognize a device is plugged in - I don't even get to the install new drivers part. Its as if nothing was ever plugged to begin with.
The nook is recognized when I use my galaxy nexus usb cord and attach it to the computer. I am starting to think this is a hardware issue; I just find it strange that the hardware works as intended while the Nook is powered off.
Mike
There's a chance that you have a broken Nook cable then.
Try getting a battery monitoring app to see what sort of current you're getting while it's on. Is the "n" on the cord lighting up while it's plugged in and on?
Yes, when it is on and plugged in the "n" is green no matter the charge
I think you should try a different Nook cable, they can do that for you at B&N's actual store without you having to buy a new cable. If that doesn't work I would wager that it would be the port.
Now, I feel I should point out that for reasons unknown to me that manual specifically says you should not plug the unit in to charge while the unit is off. As I said, I don't know why. I know I have done that with my iPhone when I need a really fast charge (plug it in, then turn it off) but never had to do that with the Nook. Just... Some FYI for you.