Related
I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614
I punched in this code: *#*#2663#*#* to update the firmware for my touch-screen and touch-key.
When I hit "Touch Key FW update" it updated really fast and everything was great!
When I hit "TSO FW update" is said "Now Updating... Warning! Do not turn off!" And it STAYED THERE FROZEN...
It said "Do not turn off!" So I left it until the battery died!
Then I plugged it in to charge it, and now the back button and menu button BOTH don't work at all! I tried two more times to "TSP FW Update" but it's totally permenantly frozen!
I tried flashing the stock firmware!
I can't get to the menu to do "factory reset!"
What do I do??
Have you tried using a USB jig and reloading firmware using Odin?
Sent from my GT-I9100 using Tapatalk
mrm1 said:
Have you tried using a USB jig and reloading firmware using Odin?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I have completely reloaded the firmware twice since then from a stock rom. I used Odin for it. My operating system works fine, generally, but the menu and back keys will not work.
But, are you saying that I can use Odin to specifically reload the TSP firmware? Because I haven't done that. If that's what you're saying, do you know where I can get TSP firmware?
But, are you saying that I can use Odin to specifically reload the TSP firmware? Because I haven't done that. If that's what you're saying, do you know where I can get TSP firmware?
Never heard of that and you dont need a uSB jig anyway as you are loading firmware ok .
I would download correct stock firmware .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero if rooted or custom roms used ..
Return to service centre .
jje
Hi,
So this issue has been fixed??
Hi all. Well... It happened to me too. I followed an advice to remove 4.3 lag by updating this, and lost all touch.
The screen won't even turn on now, but I know the phone is powered up because when I plug in a usb cable I get the windows popup.
Wow this sucks so much and I'd like to ask for any advice if there's a fix for this. I'll try to check if I can enter recovery and reflash the rom, but I think all my buttons are dead.
---------- Post added at 06:38 PM ---------- Previous post was at 05:59 PM ----------
Update: after maybe an hour it came back to life. I had good battery so I guess it was downloading/updating stuff, during which I had no control of the phone.
As far as the experience enjoyment, I give it a 2/10, would not do again.
So it was in that "Now Updating... Warning! Do not turn off!" mode for a hour and after that all was normal again? Is the wakeup problem solved with that?
Solved - gt-i9000m *#2663# tsp fw update glitch
pattmayne said:
I punched in this code: *#*#2663#*#* to update the firmware for my touch-screen and touch-key.
When I hit "Touch Key FW update" it updated really fast and everything was great!
When I hit "TSO FW update" is said "Now Updating... Warning! Do not turn off!" And it STAYED THERE FROZEN...
It said "Do not turn off!" So I left it until the battery died!
Then I plugged it in to charge it, and now the back button and menu button BOTH don't work at all! I tried two more times to "TSP FW Update" but it's totally permenantly frozen!
I tried flashing the stock firmware!
I can't get to the menu to do "factory reset!"
What do I do??
Click to expand...
Click to collapse
Hi there pattmayne and particularly anyone still getting mileage from their GT-I9000M,
I had this issue with Galaxy S Vibrant (North America) - GT-I9000M (the M is significant). I thought I would explore the *#2663# option and hey, why not update everything while I am there. I lost the use of my Menu and Back soft buttons and no amount of flashing or factory resetting seemed to help.
I found a promising solution on an obscure board (to me : forums.whirlpool.net.au/archive/2181386) as follows :
- Run the TSP FW update,
- Although it may appear to be stuck, wait a good number of minutes to be sure it has done what it needs to do,
- Interrupt the « update » specifically by removing the battery,
- [wait a few seconds for memory to discharge],
- Insert the battery, start up again, and run the other update, TS FW,
- Voila !
In order to access the special code, I had to flash back to stock and for some reason, I decided to flash back to Froyo instead of Gingerbread. The result being that from 2.2-Froyo, the TSP FW update actually worked, so I did not have to bother with pulling the battery. I am very happy to have my phone back in one piece !
I much prefer Heimdall over Odin, however I did have to do some research to find a decent Heimdall tutorial.
You should be able to find the stock files for Froyo by searching for GT_I9000M_UGJK3_UGJK3_BMCJK3.
If you can't, ping me and I will get around to providing a full write-up on how to mod your GT-I9000M (with many thanks to those that have gone before me).
Hi, i have more or less the same problem with my Galaxy S4 GT I9505. After updating to lollipop (5.0.1) the back and menu buttons were not working anymore so i started searching for some solutions, and i saw the updating touchscreen firmware option and now the fit touch is not working anymore as the buttons. I read that making that i could have fried the LCD Touchscreen. I dont hope so, the LCD is new, I've re-flashed to 5.0.1 as a reinstall. And theres no solution. I need help, i cant afford another 65€ in other LCD
Luisao10 said:
Hi, i have more or less the same problem with my Galaxy S4 GT I9505. After updating to lollipop (5.0.1) the back and menu buttons were not working anymore so i started searching for some solutions, and i saw the updating touchscreen firmware option and now the fit touch is not working anymore as the buttons. I read that making that i could have fried the LCD Touchscreen. I dont hope so, the LCD is new, I've re-flashed to 5.0.1 as a reinstall. And theres no solution. I need help, i cant afford another 65€ in other LCD
Click to expand...
Click to collapse
There is a 26 page long thread over on the S4 forum about exactly this problem.
http://forum.xda-developers.com/showthread.php?t=3250132
It is doubtful that anybody on the S2 forum will be able to help you as anything that works for the S2 probably won't work on the S4......
Sorry fella, your best bet is to post in the thread I linked you to.....
Good luck.
http://i.imgur.com/rVnFwJM.jpg
Hi,
I have the exact same problem as some of the other bootlooped/bricked Galaxy S3's, i was on a custom samsung 4.1.2 rom for about a month and while browsing the net today it crashed went in bootloop now i cant get out, went into cwm recovery mode and factory reseted but didnt do anything.
The problem now is i cant go back into clockwork mod at all, so i went into download mode by pressing power + voloume down and menu button and went into download mode and opened odin flashed a stock rom, however it just keeps saying fail after nand write.
I now tried a custom rom and the same issue occurs and it fails, now when i pull the battery out and turn it back on all i get is a error message saying 'firmware upgrade encountered an issue please select recovery mode in kies and try again' can somebody please helppppp me i literally have no phone at use at the moment!
Thanksssss :highfive:
Vishs87 said:
Hi,
I have the exact same problem as some of the other bootlooped/bricked Galaxy S3's, i was on a custom samsung 4.1.2 rom for about a month and while browsing the net today it crashed went in bootloop now i cant get out, went into cwm recovery mode and factory reseted but didnt do anything.
The problem now is i cant go back into clockwork mod at all, so i went into download mode by pressing power + voloume down and menu button and went into download mode and opened odin flashed a stock rom, however it just keeps saying fail after nand write.
I now tried a custom rom and the same issue occurs and it fails, now when i pull the battery out and turn it back on all i get is a error message saying 'firmware upgrade encountered an issue please select recovery mode in kies and try again' can somebody please helppppp me i literally have no phone at use at the moment!
Thanksssss :highfive:
Click to expand...
Click to collapse
If you have a jig you might be able to bring it back to life and get in downloadmode and retry flashing a stock rom again. Pull the battery for a minute, reinsert it and use a jig. If you don`t have one try to buy one. Good luck
factory reset is your only way
yes a reply!
gee2012 said:
If you have a jig you might be able to bring it back to life and get in downloadmode and retry flashing a stock rom again. Pull the battery for a minute, reinsert it and use a jig. If you don`t have one try to buy one. Good luck
Click to expand...
Click to collapse
heyyy thanks for the reply, i'm going to attempt to try flash another custom rom, worth a go, by the way what is a jig? also could you possible send me a link as to where i could by it, if i were to send it back to Samsung would they repair it you think?
Thanks buddy!
I'm haveing the same issue my friend. I was going to send it into mobiletechvideos.com, they have jigs for sale too. I'm about to try and flash another rom or something, it just keeps failing. I think we both have SDS or something. I can't even flash CWM through odin without it FAILING! I f I fix it I'll let you know, please do the same, I'll try different versions of odin and see what happens.
i tried a factory reset but
XeactorZ said:
factory reset is your only way
Click to expand...
Click to collapse
i tried a factory reset in cwm when i managed to get it running by pressing volume up menu and power but it did not do nothing brought it back to boot loop again this thing is going to ruin my weekend :crying:
finally there is two of me!!
navymoss35 said:
I'm haveing the same issue my friend. I was going to send it into mobiletechvideos.com, they have jigs for sale too. I'm about to try and flash another rom or something, it just keeps failing. I think we both have SDS or something. I can't even flash CWM through odin without it FAILING! I f I fix it I'll let you know, please do the same, I'll try different versions of odin and see what happens.
Click to expand...
Click to collapse
of course if i make a break-through i will definatley let you know, btw are your from the states.. because i'm from the UK, is yours an international S3 to? let me know how you get on, i will check out mobiletechvideos to but if they are based in the states then i'm in trouble lol :good:
Vishs87 said:
of course if i make a break-through i will definatley let you know, btw are your from the states.. because i'm from the UK, is yours an international S3 to? let me know how you get on, i will check out mobiletechvideos to but if they are based in the states then i'm in trouble lol :good:
Click to expand...
Click to collapse
Yea, I'm in the states. I have the International version. I'm having th eexact same issue as you my man, even with the CWM not doing a Wipe. There has got to be a fix. I Know if I can get ODIN to stop failing then we can flash, but it's not working. I'm about to give up. Been calling everyone with Google voice on my computer.
damnnn
navymoss35 said:
Yea, I'm in the states. I have the International version. I'm having th eexact same issue as you my man, even with the CWM not doing a Wipe. There has got to be a fix. I Know if I can get ODIN to stop failing then we can flash, but it's not working. I'm about to give up. Been calling everyone with Google voice on my computer.
Click to expand...
Click to collapse
yeah ima about to give up to, got to wait another 35mins for my rom to download, if it dont work gonna go bed try tomorrow its approaching 11pm here in London, let me know what your plan b is! :good:
Vishs87 said:
yeah ima about to give up to, got to wait another 35mins for my rom to download, if it dont work gonna go bed try tomorrow its approaching 11pm here in London, let me know what your plan b is! :good:
Click to expand...
Click to collapse
It's only 2pm here in Cali, I'll be trying all night. Plan b is to send it into Mobiletechvideos, they do international shipping too, 5 star rating. But in the mean time, I'm going to do some ODIN trouble shooting, maybe try the Mac OSX alternative, Heimdall, and see if I can get it to connect.
cool check this out:
navymoss35 said:
It's only 2pm here in Cali, I'll be trying all night. Plan b is to send it into Mobiletechvideos, they do international shipping too, 5 star rating. But in the mean time, I'm going to do some ODIN trouble shooting, maybe try the Mac OSX alternative, Heimdall, and see if I can get it to connect.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=ZNaQfdOi56E
someone managed to do it, give it a go, i"ll try it tomorrow, if it doesnt work hit me back with a message so i know not to try tomorrow, have a good day homie!
That's three of uss folks
I relate to you guys for that's exactly the same problem I'm going through. After successfully updated to the Jelly Bean 4.1.2 UK BTU international version and beautifully restored all my apps via Titanium backup I then proceeded to restore as well my EFS folder through a program named kTool, ignoring its warning message cuz I was just following a tutorial put out on a S3 Brazilian forum believing there was no danger at all.
Well, to my sadness and despair it returned on a bootlooping mode, if you will, and I did everything firstly tried to recover then wiped cache, dalvik, data, formatted the whole stuff and finally installed again via odin in download mode the same jelly bean 4.1.2 all to no avail
Now I got the bootlooping and when I press volume up + power + home I get a screen with a seemingly dead robot with a exclamation sign in its chest. Please what do I do in order to fully recover my S3?? this situation is killing me.
check the youtube link
Elban73 said:
I relate to you guys for that's exactly the same problem I'm going through. After successfully updated to the Jelly Bean 4.1.2 UK BTU international version and beautifully restored all my apps via Titanium backup I then proceeded to restore as well my EFS folder through a program named kTool, ignoring its warning message cuz I was just following a tutorial put out on a S3 Brazilian forum believing there was no danger at all.
Well, to my sadness and despair it returned on a bootlooping mode, if you will, and I did everything firstly tried to recover then wiped cache, dalvik, data, formatted the whole stuff and finally installed again via odin in download mode the same jelly bean 4.1.2 all to no avail
Now I got the bootlooping and when I press volume up + power + home I get a screen with a seemingly dead robot with a exclamation sign in its chest. Please what do I do in order to fully recover my S3?? this situation is killing me.
Click to expand...
Click to collapse
hey mate try the youtube link, almost worked for me it actually flashed after continously getting nand write fail, however after i flashed factory reseted and got the same error, still trying to find a way round, i suggest avoiding factory reset and reboot straight away after trying that flash on the youtube link, let me know how u get on
I've already watched the YT vid.
Vishs87 said:
hey mate try the youtube link, almost worked for me it actually flashed after continously getting nand write fail, however after i flashed factory reseted and got the same error, still trying to find a way round, i suggest avoiding factory reset and reboot straight away after trying that flash on the youtube link, let me know how u get on
Click to expand...
Click to collapse
Dude, I've watched that vid but haven't tried that procedure so far, matter of fact I will do that however flashing an earlier version of the ROM, perhaps JB 4.1.1 or 4.0.4 or yet the current one from another country since the UK BTU version I downloaded was somehow corrupted. Anyhow thanks for the heads up to avoid factory reset and reboot it instead, hopefully I'm going to manage to get the CWM recovery screen cuz now I get only this:
Android system recovey <S3>
Volume up/down to move to highlight:
power button to select.
Reboot system now
apply update from ADB
Apply update fom external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Right below it appears, along with the fallen/dead robot, the folowing message:
# MANUAL MODE #
Applying Multi-CSC....
Applied the CSC-code: ZTO
Succesfully applied multi-CSC.
Solved
Here is the solution:
http://forum.xda-developers.com/showthread.php?p=38780087#post38780087
Hi Guys, got a question (otherwise I wouldn't post here )
Well, my SGS3 isn't vibrating at all. After I flashed the same ROM nothing happens, then I downloaded another stock based ROM - nothing happens - and even when I flash the CM 10.1 nothing happens.
Does someone of you know whats wrong?
Maybe I should add, that the vibrate stopped after I got a call and the vibration annoyed me and I triggered one time the vol. down key..
Hope you can help me,
regards - Cartman
flash a stock rom, factory reset. if it doesn't help - send it to service or replace the motor
Do you mean a stock based ROM (4.1.2, not 4.2.2) or a REAL stock rom from sammobile.com?
I mean a stock ROM
Doesn't work, seems like I have to live without any Vibration, because I have no more warranty. F**king timelimited warranty >.<
But anyway, thank you
I know it may be an obvious question but......have you checked all your haptic/vibration settings?
get a new motor on ebay
So this guy online tried to make me send come cash via Western Union to China so that he can "buy my car and freight it over". I knew it was a scam so i kept msging on my Samsung Galaxy S3 with CM mod. In the end he got the ****s and next thing you know my whole OS is gone, i enter recovery mod there is nothing there, everything has been wiped out.
I can still go through all functions but i cannot mount anything. Is there any way to get my OS back?
I tried to use KIES to recover by default but it says i cannot update the device, i think its because i run CM?
Thanks
okay first 1.Why would you keep messaging with a guy who tries to scamm you ?
2. I don't think this is possibile for someone to "hack" into your phone just like that .
3. perhaps your phone died ,suddenly ?
4. flash the rescue firmware ,maybe it can help .
5. I still don't believe it
alecore said:
okay first 1.Why would you keep messaging with a guy who tries to scamm you ?
2. I don't think this is possibile for someone to "hack" into your phone just like that .
3. perhaps your phone died ,suddenly ?
4. flash the rescue firmware ,maybe it can help .
5. I still don't believe it
Click to expand...
Click to collapse
Yes i was like you, i believe it is not possible for him just to hack my phone so i kept messing with him. But the fact that after i lead him on for 5 days and right after the last email i sent him my phone just went dead. I cannot bypass the Samsung screen during startup, and it seems like it might have been bricked.
I don't see how i been using CM for last year and nothing happen and next thing this happened because then it would have happen to alot of other people using CM mod.
i have been using cm for almost 2 years ( alot of nigerians tried to scamm via email ,but i don't respond to emails ( unknown ) via phone because of data scripts)) , and i have to say ,happend to me once while playing a game ,phone suddenly turned off ,tried to turn on and ended in a bootloop .
Once you roooted your phone and changed the rom kies become unavailable for firmware upgrades . Try use odin and flash rescue firmware maybe it will help with something . Follow this guide http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6