[Q] HELP! My Samsung Galaxy S3 International I9300 is stuck in bootloop! - Galaxy S III Q&A, Help & Troubleshooting

Hi,
I have the exact same problem as some of the other bootlooped/bricked Galaxy S3's, i was on a custom samsung 4.1.2 rom for about a month and while browsing the net today it crashed went in bootloop now i cant get out, went into cwm recovery mode and factory reseted but didnt do anything.
The problem now is i cant go back into clockwork mod at all, so i went into download mode by pressing power + voloume down and menu button and went into download mode and opened odin flashed a stock rom, however it just keeps saying fail after nand write.
I now tried a custom rom and the same issue occurs and it fails, now when i pull the battery out and turn it back on all i get is a error message saying 'firmware upgrade encountered an issue please select recovery mode in kies and try again' can somebody please helppppp me i literally have no phone at use at the moment!
Thanksssss :highfive:

Vishs87 said:
Hi,
I have the exact same problem as some of the other bootlooped/bricked Galaxy S3's, i was on a custom samsung 4.1.2 rom for about a month and while browsing the net today it crashed went in bootloop now i cant get out, went into cwm recovery mode and factory reseted but didnt do anything.
The problem now is i cant go back into clockwork mod at all, so i went into download mode by pressing power + voloume down and menu button and went into download mode and opened odin flashed a stock rom, however it just keeps saying fail after nand write.
I now tried a custom rom and the same issue occurs and it fails, now when i pull the battery out and turn it back on all i get is a error message saying 'firmware upgrade encountered an issue please select recovery mode in kies and try again' can somebody please helppppp me i literally have no phone at use at the moment!
Thanksssss :highfive:
Click to expand...
Click to collapse
If you have a jig you might be able to bring it back to life and get in downloadmode and retry flashing a stock rom again. Pull the battery for a minute, reinsert it and use a jig. If you don`t have one try to buy one. Good luck

factory reset is your only way

yes a reply!
gee2012 said:
If you have a jig you might be able to bring it back to life and get in downloadmode and retry flashing a stock rom again. Pull the battery for a minute, reinsert it and use a jig. If you don`t have one try to buy one. Good luck
Click to expand...
Click to collapse
heyyy thanks for the reply, i'm going to attempt to try flash another custom rom, worth a go, by the way what is a jig? also could you possible send me a link as to where i could by it, if i were to send it back to Samsung would they repair it you think?
Thanks buddy!

I'm haveing the same issue my friend. I was going to send it into mobiletechvideos.com, they have jigs for sale too. I'm about to try and flash another rom or something, it just keeps failing. I think we both have SDS or something. I can't even flash CWM through odin without it FAILING! I f I fix it I'll let you know, please do the same, I'll try different versions of odin and see what happens.

i tried a factory reset but
XeactorZ said:
factory reset is your only way
Click to expand...
Click to collapse
i tried a factory reset in cwm when i managed to get it running by pressing volume up menu and power but it did not do nothing brought it back to boot loop again this thing is going to ruin my weekend :crying:

finally there is two of me!!
navymoss35 said:
I'm haveing the same issue my friend. I was going to send it into mobiletechvideos.com, they have jigs for sale too. I'm about to try and flash another rom or something, it just keeps failing. I think we both have SDS or something. I can't even flash CWM through odin without it FAILING! I f I fix it I'll let you know, please do the same, I'll try different versions of odin and see what happens.
Click to expand...
Click to collapse
of course if i make a break-through i will definatley let you know, btw are your from the states.. because i'm from the UK, is yours an international S3 to? let me know how you get on, i will check out mobiletechvideos to but if they are based in the states then i'm in trouble lol :good:

Vishs87 said:
of course if i make a break-through i will definatley let you know, btw are your from the states.. because i'm from the UK, is yours an international S3 to? let me know how you get on, i will check out mobiletechvideos to but if they are based in the states then i'm in trouble lol :good:
Click to expand...
Click to collapse
Yea, I'm in the states. I have the International version. I'm having th eexact same issue as you my man, even with the CWM not doing a Wipe. There has got to be a fix. I Know if I can get ODIN to stop failing then we can flash, but it's not working. I'm about to give up. Been calling everyone with Google voice on my computer.

damnnn
navymoss35 said:
Yea, I'm in the states. I have the International version. I'm having th eexact same issue as you my man, even with the CWM not doing a Wipe. There has got to be a fix. I Know if I can get ODIN to stop failing then we can flash, but it's not working. I'm about to give up. Been calling everyone with Google voice on my computer.
Click to expand...
Click to collapse
yeah ima about to give up to, got to wait another 35mins for my rom to download, if it dont work gonna go bed try tomorrow its approaching 11pm here in London, let me know what your plan b is! :good:

Vishs87 said:
yeah ima about to give up to, got to wait another 35mins for my rom to download, if it dont work gonna go bed try tomorrow its approaching 11pm here in London, let me know what your plan b is! :good:
Click to expand...
Click to collapse
It's only 2pm here in Cali, I'll be trying all night. Plan b is to send it into Mobiletechvideos, they do international shipping too, 5 star rating. But in the mean time, I'm going to do some ODIN trouble shooting, maybe try the Mac OSX alternative, Heimdall, and see if I can get it to connect.

cool check this out:
navymoss35 said:
It's only 2pm here in Cali, I'll be trying all night. Plan b is to send it into Mobiletechvideos, they do international shipping too, 5 star rating. But in the mean time, I'm going to do some ODIN trouble shooting, maybe try the Mac OSX alternative, Heimdall, and see if I can get it to connect.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=ZNaQfdOi56E
someone managed to do it, give it a go, i"ll try it tomorrow, if it doesnt work hit me back with a message so i know not to try tomorrow, have a good day homie!

That's three of uss folks
I relate to you guys for that's exactly the same problem I'm going through. After successfully updated to the Jelly Bean 4.1.2 UK BTU international version and beautifully restored all my apps via Titanium backup I then proceeded to restore as well my EFS folder through a program named kTool, ignoring its warning message cuz I was just following a tutorial put out on a S3 Brazilian forum believing there was no danger at all.
Well, to my sadness and despair it returned on a bootlooping mode, if you will, and I did everything firstly tried to recover then wiped cache, dalvik, data, formatted the whole stuff and finally installed again via odin in download mode the same jelly bean 4.1.2 all to no avail
Now I got the bootlooping and when I press volume up + power + home I get a screen with a seemingly dead robot with a exclamation sign in its chest. Please what do I do in order to fully recover my S3?? this situation is killing me.

check the youtube link
Elban73 said:
I relate to you guys for that's exactly the same problem I'm going through. After successfully updated to the Jelly Bean 4.1.2 UK BTU international version and beautifully restored all my apps via Titanium backup I then proceeded to restore as well my EFS folder through a program named kTool, ignoring its warning message cuz I was just following a tutorial put out on a S3 Brazilian forum believing there was no danger at all.
Well, to my sadness and despair it returned on a bootlooping mode, if you will, and I did everything firstly tried to recover then wiped cache, dalvik, data, formatted the whole stuff and finally installed again via odin in download mode the same jelly bean 4.1.2 all to no avail
Now I got the bootlooping and when I press volume up + power + home I get a screen with a seemingly dead robot with a exclamation sign in its chest. Please what do I do in order to fully recover my S3?? this situation is killing me.
Click to expand...
Click to collapse
hey mate try the youtube link, almost worked for me it actually flashed after continously getting nand write fail, however after i flashed factory reseted and got the same error, still trying to find a way round, i suggest avoiding factory reset and reboot straight away after trying that flash on the youtube link, let me know how u get on

I've already watched the YT vid.
Vishs87 said:
hey mate try the youtube link, almost worked for me it actually flashed after continously getting nand write fail, however after i flashed factory reseted and got the same error, still trying to find a way round, i suggest avoiding factory reset and reboot straight away after trying that flash on the youtube link, let me know how u get on
Click to expand...
Click to collapse
Dude, I've watched that vid but haven't tried that procedure so far, matter of fact I will do that however flashing an earlier version of the ROM, perhaps JB 4.1.1 or 4.0.4 or yet the current one from another country since the UK BTU version I downloaded was somehow corrupted. Anyhow thanks for the heads up to avoid factory reset and reboot it instead, hopefully I'm going to manage to get the CWM recovery screen cuz now I get only this:
Android system recovey <S3>
Volume up/down to move to highlight:
power button to select.
Reboot system now
apply update from ADB
Apply update fom external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Right below it appears, along with the fallen/dead robot, the folowing message:
# MANUAL MODE #
Applying Multi-CSC....
Applied the CSC-code: ZTO
Succesfully applied multi-CSC.

Solved
Here is the solution:
http://forum.xda-developers.com/showthread.php?p=38780087#post38780087

Related

It's broken hasn't it...

What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway

[Q] I9100 factory reset stuck

first of all hello to you all, i was following this forum before but i didnt signed up.
now i have a problem and i need your help and im sure that this has happened to someone else but i checked quite a few threads but didnt find the exact problem what i have.
so my problem is this, i was using siyah kernel and needed to reset my phone for some reasons. i tried to factory reset from settings and now my phone does nothing keeps black screen nothing happens (its been 3-4 hours) and i tried to reboot it and now it gives the first opening screen"samsung galaxy s2" writing but then it instantly goes to black screen again.
i cant go to recovery mode or download mode etc.
please i need your help this is my home&work phone and i need it back quickly.
Try take battery out for five mins then try to go to recovery. What firmware did you have?
andrewwright said:
Try take battery out for five mins then try to go to recovery. What firmware did you have?
Click to expand...
Click to collapse
i had ics. i took the battery off and ill try again in a few minutes.
i'll post what happens.
Pls don't say it was 4.0.4 ics? ? Never ever do a factory reset with that as has brick bug. Some say its kernel some say software but either way you should never do this.
andrewwright said:
Pls don't say it was 4.0.4 ics? ? Never ever do a factory reset with that as has brick bug. Some say its kernel some say software but either way you should never do this.
Click to expand...
Click to collapse
well, i bought the phone from my cousin with this firmware and i think it was 4.0.4.
so you say im in trouble? i dont know what should i do with brick bug, and frankly (as you can see) i dont now too much about android system.
You can try
A jig
Jtag
Mother board replacement
You could trying hold down vol-home button and power then put battery into phone. See if it go's to download mode.

[Q] Galaxy s3 screen bootloop

Hey guys,
I have a galaxy s3 (I9300) and I've had it rooted for some time now. I started using CyanogenMod 10.2 nightlies a few months ago and they've mostly been fine. The odd issue comes up but I've been able to work it out. So, a few hours ago my phone just turned off of its own accord and started to bootloop, but on the "Samsung Galaxy S3 GT-19300" screen, not the CyanogenMod screen (to clarify, this screen comes up first then the cyanogenmod one usually). I've tried booting into recovery (CWM 6) but it just shows the CWM boot logo thing (that cog with the hat) and then loops back to the galaxy s3 page. I've also tried putting it in download mode, and it seems to stay on the warning page longer than it does anywhere else, but it wont let me actually put in it download mode from there.
I had a look around google and saw people have had the same problem, but everything I could find was when people had flashed a new rom/kernel etc. and something had gone wrong in the process. The weird thing about mine is that I haven't changed anything, even downloaded any new apps, for maybe a week, so it's not like something suddenly changed. I also wasn't using it when it started, it was just sitting on the table next to me.
Usually I can work these things out, but I'm stumped here. Any help would be really appreciated.
Thanks in advance!
danielbollom said:
Hey guys,
I have a galaxy s3 (I9300) and I've had it rooted for some time now. I started using CyanogenMod 10.2 nightlies a few months ago and they've mostly been fine. The odd issue comes up but I've been able to work it out. So, a few hours ago my phone just turned off of its own accord and started to bootloop, but on the "Samsung Galaxy S3 GT-19300" screen, not the CyanogenMod screen (to clarify, this screen comes up first then the cyanogenmod one usually). I've tried booting into recovery (CWM 6) but it just shows the CWM boot logo thing (that cog with the hat) and then loops back to the galaxy s3 page. I've also tried putting it in download mode, and it seems to stay on the warning page longer than it does anywhere else, but it wont let me actually put in it download mode from there.
I had a look around google and saw people have had the same problem, but everything I could find was when people had flashed a new rom/kernel etc. and something had gone wrong in the process. The weird thing about mine is that I haven't changed anything, even downloaded any new apps, for maybe a week, so it's not like something suddenly changed. I also wasn't using it when it started, it was just sitting on the table next to me.
Usually I can work these things out, but I'm stumped here. Any help would be really appreciated.
Thanks in advance!
Click to expand...
Click to collapse
can you at least enter download mode after a long time you said? if not, try pulling out the battery for 5 minutes or more and re-insert and enter download mode. i hope it's not sds! good luck
sriram231092 said:
can you at least enter download mode after a long time you said? if not, try pulling out the battery for 5 minutes or more and re-insert and enter download mode. i hope it's not sds! good luck
Click to expand...
Click to collapse
Nope, if I press the volume up button to go into it, it just goes back to the bootloop. I'll try the battery thing though, thanks!
Nope, it didnt work, I left it out for maybe half an hour and nothings changed :/ anyone else got any ideas?
SDS thread and BootLoop identical questions posted .
What does Product Code say in download mode .
But if you cannot get to download mode then you need a service centre repair .
looks like u are facing SDA but a bit diffrend than a normal SDS.. mine still can go into download mode with blank product name..
If product name is blank in download mode then you got sudden death, consider a phone as a brick. Nothing will help, including repartitioning.
You need to contact service centre.
I'll check it in a minute, but if it is bricked, will any service center actually help me seeing as it's rooted and all?
danielbollom said:
I'll check it in a minute, but if it is bricked, will any service center actually help me seeing as it's rooted and all?
Click to expand...
Click to collapse
AFAIK if it's sudden death then it's not possible to detect root and other modified things, or in other words - nobody has money to prove that you have been using unofficial firmware .
JustArchi said:
AFAIK if it's sudden death then it's not possible to detect root and other modified things, or in other words - nobody has money to prove that you have been using unofficial firmware .
Click to expand...
Click to collapse
Ahhhh, well that is handy then
In terms of a service centre, will samsung have a list of them somewhere so I can find one near me?
So I contacted samsung and they gave me the link to book into a service centre etc, but I just realised that when I try to go into recovery mode, the CWM recovery logo comes up before going back to bootloop. Is there any way to get rid of that so that my root is completely untraceable?
danielbollom said:
So I contacted samsung and they gave me the link to book into a service centre etc, but I just realised that when I try to go into recovery mode, the CWM recovery logo comes up before going back to bootloop. Is there any way to get rid of that so that my root is completely untraceable?
Click to expand...
Click to collapse
If you can't flash anything with Odin (stock software) then you're screwed. Eventually you can try to enter recovery and flash "eraser" of recovery, but this requires working recovery... So if you actually can enter recovery then you can also flash anything, which will literally delete everything.
In other case, no, no way. But if you're lucky enough you may break it just by leaving your phone on for some hours in bootloop, haha.
JustArchi said:
If you can't flash anything with Odin (stock software) then you're screwed. Eventually you can try to enter recovery and flash "eraser" of recovery, but this requires working recovery... So if you actually can enter recovery then you can also flash anything, which will literally delete everything.
In other case, no, no way. But if you're lucky enough you may break it just by leaving your phone on for some hours in bootloop, haha.
Click to expand...
Click to collapse
Is there any way to wipe it with magnets or anything? hahah I'm clutching at straws now, but otherwise I'm just left with an expensive paperweight so I'm trying to find anything I can
danielbollom said:
Is there any way to wipe it with magnets or anything? hahah I'm clutching at straws now, but otherwise I'm just left with an expensive paperweight so I'm trying to find anything I can
Click to expand...
Click to collapse
To be honest think twice before physically crashing your internal memory, as it may void your warranty at all.
I'd try flashing stock firmware through odin, if it doesn't work I'd try flashing anything through recovery. If both of these methods fail just leave your phone in bootloop and hope that it'll automatically destroy everything... :laugh:
Seriously though, you can either physically destroy internal memory or leave it in bootloop and hope for the best, eventually send them device in current status. Up to you, because you won't have a possibility to do anything else.
JustArchi said:
To be honest think twice before physically crashing your internal memory, as it may void your warranty at all.
I'd try flashing stock firmware through odin, if it doesn't work I'd try flashing anything through recovery. If both of these methods fail just leave your phone in bootloop and hope that it'll automatically destroy everything... :laugh:
Seriously though, you can either physically destroy internal memory or leave it in bootloop and hope for the best, eventually send them device in current status. Up to you, because you won't have a possibility to do anything else.
Click to expand...
Click to collapse
If I send it back to them as it is now it'll take them about 20 seconds I reckon before they see the CWM logo, realise its rooted and send it straight back, so I dont know what I'm gonna do hahah

O2 UK original Firmware for Galaxy S3

Hi all, I have tried to unlock my galaxy S3 gt i 9300, which is locked to O2 UK. I live in Ireland and bought the phone from a guy on e bay. I got the unlock code from two different sources and both are the same, but neither will unlock the phone, I have tried the unfreeze code too but it gets me nowhere. Entering the keyboard codes does not work either. The firmware baseband version which is on the phone at present is I9300XXUGMK6, the build number is JSS15J.I9300XXUGNA5, I feel that if I can get the phone back to it's original O2 UK firmware then I might be able to unlock the thing. My problem is that I have found I9300XXALE8_I9300O2UALE5_O2U to be the original firmware, but the link to it from every site is dead and I cannot download it, all the links were to hotfile and we all know what became of it. If anyone has any other suggestions as to how I might unlock my phone then I would be more than happy to try them.
Best wishes Wez
Flash the latest o2u, root it with cf autoroot, nvdata unlock method. Do not attempt to go back from 4.3 as you will half cabbage your phone. The efs changed.
Sent from my GT-I9300 using Tapatalk
shivadow said:
Flash the latest o2u, root it with cf autoroot, nvdata unlock method. Do not attempt to go back from 4.3 as you will half cabbage your phone. The efs changed.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Many thanks I will try that now and let you know how I get on, though the guy I got the second code from tells me the phone should not be rooted, if it is he says that the code will not work. But anything is worth a try so I will try it before I root the phone.
Thanks again best wishes Wez
kerrywez said:
Many thanks I will try that now and let you know how I get on, though the guy I got the second code from tells me the phone should not be rooted, if it is he says that the code will not work. But anything is worth a try so I will try it before I root the phone.
Thanks again best wishes Wez
Click to expand...
Click to collapse
At the risk of sound stupid, I am going to ask one question, where do I find said latest stock ROM for my O2 UK S3, because all the ones I find are not on any link that works, they nearly all try to send me to hotfile, would seem that nobody has taken the trouble to put up any mirror download links, which has left me very frustrated. Hope someone can please point me in the right direction, because I have a phone which is of no use to me.
Best wishes and good luck Wez
kerrywez said:
At the risk of sound stupid, I am going to ask one question, where do I find said latest stock ROM for my O2 UK S3, because all the ones I find are not on any link that works, they nearly all try to send me to hotfile, would seem that nobody has taken the trouble to put up any mirror download links, which has left me very frustrated. Hope someone can please point me in the right direction, because I have a phone which is of no use to me.
Best wishes and good luck Wez
Click to expand...
Click to collapse
here
may require registration
spamtrash said:
here
may require registration
Click to expand...
Click to collapse
Many thanks am downloading the latest rom from there now, hopefully this will do the job. I will not be able to try it till tomorrow morning as it is very slow downloading, but I can leave it all night and use Odin to flash the phone.
Good luck Wez
Samsung updates are always on slow hosts. It costs a lot of money to hire server space and free hosts that do over a Gb is as rare as hens teeth.. how did you get on?
Sent from my GT-I9300 using Tapatalk
Many thanks to all who helped with my problem, I managed to get my s3 unlocked, just need to get it rooted now and get rid of the stupid thing keeps going to safe mode when booted normally, but if I boot whilst holding the home key (the middle one at the bottom) then the phone will try to boot into download mode, I then hit the volume down button and hole the home key again, this time the phone reboots itself and will boot into a non safe mode. Though this is not ideal and someone needs to find a cure for this, it is better than nothing. Tried to flash the resurrection remix ROM, but it stopped when a bit was done and failed will try some other custom ROM when I get the chance, at the moment my phone is keeping going back to the recovery screen.
Will let you know what happens, best wishes Wez
kerrywez said:
Many thanks to all who helped with my problem, I managed to get my s3 unlocked, just need to get it rooted now and get rid of the stupid thing keeps going to safe mode when booted normally, but if I boot whilst holding the home key (the middle one at the bottom) then the phone will try to boot into download mode, I then hit the volume down button and hole the home key again, this time the phone reboots itself and will boot into a non safe mode. Though this is not ideal and someone needs to find a cure for this, it is better than nothing. Tried to flash the resurrection remix ROM, but it stopped when a bit was done and failed will try some other custom ROM when I get the chance, at the moment my phone is keeping going back to the recovery screen.
Will let you know what happens, best wishes Wez
Click to expand...
Click to collapse
To get out of the recovery boot lock I had to leave the phone with the battery out of it for about 5 minutes, I was then able to get into download mode, by booting with the volumes down and home buttons held. I then used Odin to reflash the stock firmware again, which it did OK.Then I needed to root the phone again so I did that. I then downloaded the Android Revolution DH-SGS3, moved it to the external SD card, rebooted into recovery and flashed it to the phone, but again the phone went into it's crazy recovery boot loop, at the moment I have the battery out of kit and will try replacing it now and booting into the new ROM. It appears to be booting into the rom now, it has been on the Samsung screen for a while now and I am hoping that it will boot into the rom given a little time, this being it's first boot. OK all booted up OK, the only problem that remains is the bleeding thing booting into safe mode, but lots of people have got that.
Happy days, best wishes Wez
I have never encountered that issue before. When exactly did the boot issue start?
Glad you got this far!.
Sent from my GT-I9300 using Tapatalk
shivadow said:
I have never encountered that issue before. When exactly did the boot issue start?
Glad you got this far!.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
The boot issue started after I had tried to flash with another rim, which I feel was not fully downloaded, at any rate the flash was abandoned and when I went back through the options and hit the reboot now, it went into the loop. I had to remove the battery and leave it out for about 5 minutes, less might have done, when I reinstalled the battery, I went into download and using Odin flashed the phone with a stock rom and rooted it, then I flashed the android revelation rom, the phone again got stuck on the loop, this time I took the battery out the phone and left it, again for about 5 minutes, then replaced the battery and hit the power button and the phone booted into the rom, after a few minutes. I have been using this rom for a while now, but have noticed that for some reason the sound, for everything goes of completely, nit found a cure for that yet, but I am downloading the Echoe rom now, it will soon be finished, and I am going to flash it as soon as I can. I have the Echoe rom on my SGS4 and like it very much. I shall let you know if I have the same problem with this rom, when I flash it, the loop that is.
Best wishes Wez
kerrywez said:
The boot issue started after I had tried to flash with another rim, which I feel was not fully downloaded, at any rate the flash was abandoned and when I went back through the options and hit the reboot now, it went into the loop. I had to remove the battery and leave it out for about 5 minutes, less might have done, when I reinstalled the battery, I went into download and using Odin flashed the phone with a stock rom and rooted it, then I flashed the android revelation rom, the phone again got stuck on the loop, this time I took the battery out the phone and left it, again for about 5 minutes, then replaced the battery and hit the power button and the phone booted into the rom, after a few minutes. I have been using this rom for a while now, but have noticed that for some reason the sound, for everything goes of completely, nit found a cure for that yet, but I am downloading the Echoe rom now, it will soon be finished, and I am going to flash it as soon as I can. I have the Echoe rom on my SGS4 and like it very much. I shall let you know if I have the same problem with this rom, when I flash it, the loop that is.
Best wishes Wez
Click to expand...
Click to collapse
The Echoe ROM flashed without any further loop and to my surprise the phone did not boot into safe mode, so an improvement there, with both. But the sound is still a problem. I have since the first boot had to reboot several times and the damned thing is back to the bloody safe mode. To get round it now I have to hold the volume down, the home and power keys, to take me to the screen for download, when there I push the volume down and the phone goes to reboot, in it's own, while it is doing that I hold the home button, the phones boots without going into safe mode. I have tried to do it the way I was before, but it is not working that way now, so got to go down the way of booting into the download screen, but at least it works.
Very best wishes and good luck Wez
Interesting.. it would seem that the issue lies with custom roms. Which recovery are you using? Cwm 6032 is a good recovery to start with, moving on to 6047. I had issues with twrp.
Sent from my GT-I9300 using Tapatalk

Samsung Galaxy S3 - Many issues :(

Hello everybody,
I have ran into lot of issues in my Samsung Galaxy S3 I-9300. I bought it from UK(unlocked) two years ago.
The issue started with the recharge issues. It shows as it is charging but it doesn't charge and some times the battery suddenly increases by 30-50% on phone restart. And then one day I started encountering phone restart issue. I started losing files that I had copied or created during those times on my external SD card. I once saw that I had android robot fallen with red exclamation mark in the recovery screen. And then one day my phone won't go ahead of Samsung logo so I did a factory reset. After factory reset I thought everything will be fine but still I had few issues so I installed Kies and did a firmware upgrade from the Samsung site. But the recovery robot was still down with red exclamation mark. I thought rooting will help me in fixing it so I rooted the phone but no help. I finally installed stock recovery from odin and it fixed it. Everything looked fine. But I still had files getting deleted from SD card and phone auto restart issue. And recharging issue resurfaced as well and I was not able to recharge from wall charger. I had to switch off my mobile and recharge it from USB cable. I keep it overnight for approx. 8-9 hours at a stretch ans still charging would be around 60-70%. Yesterday my phone restarted on its own and now its getting stuck at Galaxy logo screen. Its not even going to Samsung screen. I can't go to recovery mode but I can still go to download mode. I tried installing stock recovery firmware today from odin and it failed. I can install stock image from odin but I want some solution as I can't keep on doing it again and again.
P.S: I did factory reset twice and after factory reset every time I restart few old applications were getting installed automatically which I had not selected.
Please help me guys.
Update:
Tried flashing stock recovery and stock rom. Nothing worked. Have took capture of the ODIN screen to give more clear idea. Thanks.
deleted
I have added screenshot. Please take a look and help me people. I am really stuck. Thanks.
Can anybody please help me ? Atleast tell if it is possible to recover my mobile or not. Thanks and Happy New Year!!
Can somebody please give me a link to S3 Original Kernel file so that can try flashing it. Thanks
crazy access said:
Can somebody please give me a link to S# Original Kernel file so that can try flashing it. Thanks
Click to expand...
Click to collapse
Try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735 << there are two versions you will find the pit file in the 4.1 version download. If this fails or issues come back then it will need service repair.
Bro, it isn´t a software problem, its your battery, it needs to be changed
adaltavo said:
Bro, it isn´t a software problem, its your battery, it needs to be changed
Click to expand...
Click to collapse
I agree he may have a battery problem but that would not explain all the other issues with Odin and recovery etc. I would still recommend flashing rescue firmware first before paying out for a new battery.
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Thanks for the replies tallman43 and adaltavo.
Adaltavo, my phone is not booting at all. It's not going beyond S3 screen to Samsung logo so I can't try recovery from any apk.
I am going to try recovery method in the link provided by tallman43 and will come back with the results.
Meanwhile, if you have any other tips do tell me.
Thanks.
adaltavo said:
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Click to expand...
Click to collapse
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
In ODIN Mode my screen reads:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Ring a bell ??
crazy access said:
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
Click to expand...
Click to collapse
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Hi tallman. Thanks for the response. I actually downloaded the file from the link you gave, and there were four files but there was no pit file in it. So when I did search again in the forum for pit file I got another link where a user had the same problem and he did ticked the options so I tried that as well. And you were not harsh. It is irritating when you are trying to help and I didn't read the instructions carefully
I will try again and post results here.
Thanks for the help once again
tallman43 said:
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Click to expand...
Click to collapse
After trying everything the ODIN still failed, so went to service station where they told that internal memory is corrupt and I need to replace motherboard. Thanks tallman and adaltavo for trying to help me out. Appreciate it. Hunting for new phone now.

Categories

Resources