just work back light on off on off
and can connect nvflash......
but i dont have bct?? config file ..
someone help my tab
Start slowly, what did you do?
Do you still see a logo when you try to boot?
Try holding vol- and power and enter download mode.
Get the latest firmware from here, Odin 1.85 and flash the bootloader only: http://netfolder.in/folder.php?folder_id=VgnYQ90
no, i don't see anything.
just light on off on off....
so i can't use odin.
i think.
nvflash is only way to unbrick my tab.
Ok, but what did you do to brick it?
What light? screen or camera?
i'm not good english.
first brick was soft brick.
i wanted fix it. that i used nvflash. when my tab was bricked.
screen back light.
Related
Hiya,
I "permanant" rooted my vodafone 858 with z4 root.. and when it turned itself to reboot, it got stuck on the vodafone logo..! The phone won't load, and the vodafone logo repeditely comes up....
Does this mean that my phonen is bricked and I should chuck it away?? Is there anyway to fix it? Please help!!!
Its not bricked, its stuck in the bootloop. Bricked means doesn't turn on, doesn't vibrate, doesn't respond at all. Don't throw it away, try booting into recovery, possible holding volume down while turning the phone on. If you can load into recovery you might be able to flash a recovery rom. But since I do not own that phone, I do not know.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hmm... I don't seem to able to boot into recovery.... I have tried turning the phone on while holding the power up/down but it doesn't seem to do the trick... is there any way to get into the system?
Use a jig to get into download mode. I have use that method with 100% success.
Once you get into download mode you can use odin to get back to stuck.
Here is the jig link if you needed:
http://forum.xda-developers.com/showthread.php?t=889128
good luck.
Oh... is there any other method other than jig?? It looks really complicated.!!!!!
well you might think it is complicated but that is the easiest solution besides trying key combinations to enter into download mode.
I build a jig yesterday to help one of my friend that got his phone soft bricked and I can tell you is not that hard. It's just 3 100k ohms resistors that you shape into a tear drop and then touch the two connectors on the micro usb closes to the phone jack... It can't get any simpler than that.
I now it might sound crazy but that is the easiest way I know.
good luck.
Sorry to resurect an old thread but i had the same problem and found this thread... I fixed this with a muuuuuuuch simpler solution... While the phone is looping the animation just user SUPER1CLICK to unroot the phone... the phone will crash when this is finished and leave u with a black screen... remove battery, wait a few secs and replace and it will boot just fine
I have Samsung Galaxy i9000. I have comfused and do this http://forum.xda-developers.com/showthread.php?t=731989&page=1 and now the phone showing the white screen with at&t logo and goes nowhere! Omg.....what i must do now to ge the phone working again? I didn't see that is for the captivate only! Help me pls, i'm desperate! What i must do to get the phone work again?????
You probably have to SBF and start over from scratch...did you have any nandroid backups? Are you on custom rom?
I don't have any backup (if you mean my files i have save them on pc before the problem). And i was rooted, and i have remove the root, but in about phone was said:
Filmware version: 2.2.1
Baseband version: I9000XXJPY
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XWJS8
And now i have done this i said in the start and i have problem. What is the SBF? You can explain me please what i must do? Thanks.
Basically you have to do a HARD RESET and reinstall android OS, im coming from motorola phones and when they get locked up that bad you have to do a hard reset then reinstall the android OS im not sure how it works on samsung have you tried over in the samsung forums? Have you tried doing a hard reset?
No! I don't know how to do it. You can explain me please? Even if i think that will not work (because the download mode is not working!)
Check these links out on how to do a hard reset basically you power the phone up holding a certain combination of power and volume buttons attached are links to a guide and video of how to do it...give that a try and let me know if that helps....basically its a factory reset so all info is lost...i think that link you tried above in your post is not for your device.
Try These...
Tutorial....http://www.hard-reset.com/samsung-i9000-galaxy-s-hard-reset.html
Video...http://youtu.be/eLYkMk16la8
I have tried my friend, but i can't move on to the second step, because the same white screen with logo at&t appears and is flashing...I can't escape from this screen..
even if you remove the battery? Can you get it to shut-off?
I have tried remove the battery, connect it to pc and do the step but is not showing nothing!
Take out the battery, leave it out for 30sec, reinsert it and hold the [vol+]+[home]+[power] untill the first bootscreen apears. Then you are in recovery mode and can perform a wipe/factory reset.
If this does not bring up your device you need to download odin, and a firmware rom, boot your device with [vol-]+[home]+[power] (dont connect to pc until odin is set up and ready to flash) this brings you to download mode then select the firmware image in odin as pda (most likely you need to unzip first, the firmware is called xxjvt...tar) close all kies related stuff in taskmanager, now connect your phone to pc and wait for odin to show 'added' in console box. Now click start, wait for your device to reboot. Done.
----------------------------------------
tapatalked
I can't do nothing my friend, is not letting me enter to any mode, always appears the white screen with the at&t logo! I have remove the battery as you said but the same thing again! I can't boot, nothing! Always appears the white screen with the logo. My onle hope now is the jig. I wait it and i will try to enter to the download mode.
trueless said:
I can't do nothing my friend, is not letting me enter to any mode, always appears the white screen with the at&t logo! I have remove the battery as you said but the same thing again! I can't boot, nothing! Always appears the white screen with the logo. My onle hope now is the jig. I wait it and i will try to enter to the download mode.
Click to expand...
Click to collapse
have you ever been able to enter recovery using that 3 button combo? there are devices that have those disabled. in that case a usb jig is the only help.
after getting it going i highly recommend to enable the 3bc with a different bootloader, there is also info in the GalaxyS Subforum.
Ok. My only hope is Jig now. I hope will work and for me.
Jig after very one and half week came! I have done all and it's all ok now. Thanks for the help buddies!
Hello everyone,
My Galaxy Tab 10.1 GT-P7500 is stuck in a boot loop which only shows "Samsung Galaxy Tab 10.1" on screen. I've tried pressing the power button to power down the device, but the screen will just go blank for a while and then the "Samsung Galaxy Tab 10.1" will show again. There is no way for me to go into download mode.
Any way to solve this problem?
I've tried and tried and finally got into download mode, used Odin to install a kernel. Everything runs OK, until it reboots. Then I see the logo again for awhile, suddenly it powers off, then unable to switch on anymore. I think the battery is dead, will try later after it is charged up.
Nobody seems to care about the issue I've face.
Anyways, been trying out all the solutions that I can find all around XDA, it turns out only "restocking" can solve my problem.
Re-flashed my tablet following the guide at Team Overcome's site.
Maybe these instructions will help
a while ago i got my tablet stuck in bootloop... after a lot of research... i fixed it and put the step by step here: http://forum.xda-developers.com/showthread.php?t=1329261
Let me know if it helps!
You should get a USB jig. It'll jump you into download mode. Unless that tablet doesn't use the mini usb... Which it might not. If you have a custom recovery on there, then wipe data, then install a new ROM
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Bootloop and recovery will not work...
damastah said:
You should get a USB jig. It'll jump you into download mode. Unless that tablet doesn't use the mini usb... Which it might not. If you have a custom recovery on there, then wipe data, then install a new ROM
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Hi - will a "USB jig " help me with my problem, or do you have any Suggestions?
I was flashing stock 4.0.4 ICS via Odin and unfortunately I walked away from my computer for a quick minute ... and my 3 year decided to unplug the tablet. I previously had CWM v.5???? - now I can see the download screen, then get to the OS warning screen.
Then when it says to hit volume up to continue and down to cancel ... I hit volume up and it goes into bootloop and when I hit down it goes into download load but Odin doesn't recognize it.
Note : I have to hit the opposite volume to even get into download mode.
Any ideas or help would be greatly appreciated.
if im not wrong you can restore with kies, emergency firmware ....... or something like that, did you try?
Hey guys,
I tried upgrade to ICS via Kies and the upgrade failed and the phone stopped rebooting. So, I tried to do a recovery via Odin but instead of clicking the PDA button and flashing, I click the Bootloader button and flahed. Now I can't enter the download mode and the phone just keeps rebooting. Is there anything I can do to get into the download mode?
Thanks
Might be a chance that a jig could work. If not, JTAG or Samsung service center.
Thanks
I guess it's time to upgrade to the SIII then....
messing wiv the bootloaders is dangerous i think ,phone needs service center now...
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
crazy_android said:
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
Click to expand...
Click to collapse
Actually, a usb jig won't recover a hard bricked device. His device does boot up so it's not a hard brick and there may be a chance.
Sent from my GT-I9100 using xda premium
The device sounds fine, just seems like you're not getting the button combo done quick enough or correctly. Pull the battery first, if it boots into a loop instantly, hold the combo while inserting battery.
using a jig will be a good idea
I should mention that it only starts booting up but never actually goes past the boot up screen. The blue bar stops almost at the end and doesn't go any further.
So, I got a usbjig today and was able to enter the download mode but all attempts to flash through Odin have failed...
Any suggestions?
Without seeing the log from Odin (you could always upload a screenshot; but it probably won't make a lot of difference), hard to say definitively. But being a betting man I'd wager the NAND is completely stuffed therefore service centre job.
Good afternoon to everyone, the problem is this, I mixed up the recovery and flashed it from the ultra version, as a result, the phone does not turn on in the firmware mode, it does not enter the recovery either. when you press the buttons, the volume - and the power reboots and turns off, please help
i think you need to go to download mode and use adb if your have a google phone or on samsung odin reflash your firmware
if your stuck on twrp then get your firmware and use a sd card put the firmware in do dont unzip it! reflash done
if your stuck in a black screen then say rip to your phone/tablet cus its very bricked you cant do anything i got it too i have no way to fix it hope this helps