Hey guys,
I know everybody is trying to crack the bootloader to be able to load froyo kernel. But why not get inside the SEUS update Roms, change the system.img and create a new ROM and then let SEUS patch the new custom ROM on it. inside the Opensource Kit from SE Website is basically all information needed to cross compile new froyo or even gingerbread kernel from scratch. And there would be no need to change the bootloader, except just to make sure the correct kernel image is loaded while booting (which should be able by simply renaming). This should work for both, android kernel and linux kernel.
You guys think its worth looking into it? Or am I totally wrong about this?
greetz slade
It isnt simple as you thnik
Sent from my U20i using XDA App
Besides you would miss out a lot of new features, just take a look at the milestone froyo port by d3xter_nlb.
owain is online.. wew..
---------- Post added at 03:04 AM ---------- Previous post was at 02:53 AM ----------
ok Smg67 is a ghost thats following me.
Guys, I want to ODIN to Froyo 2.2 because I don't want to use Sam Kies. Earlier, I had ODIN'd to 2.1 Eclair but it is plain boring! Anyway, I found the Stock Froyo files at http://forum.xda-developers.com/showthread.php?t=1036193 but the OP didn't post the PIT file. I searched the thread and someone asked the same question but in reply, someone else said that you can do a one click install. I can't post in that thread due to my current post count (I am fairly new and noob here) so I had to start a new thread. How do I ODIN to Froyo with a MD5 tar file with no PIT file?
Thank you everyone!
search for a 512.pit file in the forums....if not I happen to have it,will gladly provide it.
Thank you for your help! I used ROM Manager premium and upgrade to Froyo instead of using Samsung Kies. Now, the whole reason to ROOT my phone was to get rid of the damn LAG!!!!!!! It is driving me crazy. I would LOVE to stay on stock but get rid of LAG somehow. I looked into Voodoo but it messed up my phone before so I don't wana take that route. Any other suggestions? How about OCLF? Would it work on Froyo?
Voodooo rocks clocks! Any custom FROYO ROM will have it. Check in recovery if its enabled or disabled. Good luck!
Hello,
I have tablet 10.1 3g, I have 3.2 Stock rom, and pershoot kernel. I want to go back to stock everything.
I want it to be like taking it out of the box. 3.1 is ok, just want to be able to do it.
can anyone help me out on this?
I really want to be able to update through kies or OTA with samsung itself, I know its kinda nooby to do this.
I have my reasons please help me out.
Thanks a lot.
jsikaffy said:
Hello,
I have tablet 10.1 3g, I have 3.2 Stock rom, and pershoot kernel. I want to go back to stock everything.
I want it to be like taking it out of the box. 3.1 is ok, just want to be able to do it.
can anyone help me out on this?
I really want to be able to update through kies or OTA with samsung itself, I know its kinda nooby to do this.
I have my reasons please help me out.
Thanks a lot.
Click to expand...
Click to collapse
If you know how to flash a kernal, then just do it again with stock kernal. Or do a full wipe and factory reset in cwm or factory reset in settings/privacy that way it will be as out of the box and you will still have Pershoot's kernal.
Or
Forget all that and flash a custom rom like Task's, then you get the update, kernal, root and everything else improved and still get the out of the box experience with a whole new rom
---------- Post added at 02:08 PM ---------- Previous post was at 02:06 PM ----------
Just noticed you said 3g . All I said is still right except Task's rom is for wifi only.
Follow the instructions in "Re-“Stocking” Yer System…" section of http://p7510.teamovercome.net/?page_id=18 to get stock ROM.
After this flash the stock recovery using ODIN.
Then factory reset in stock recovery.(note: this will erase your SD card data too)
I followed a guide recently, but it took me to honeycomb.... Like the google io devices. Pissed me off.
Task.. just makes for WIFI... and overcome tab gave tooooo many FC when I flashed it. Did not enjoy it at all.
Im currently running stock 3.2 and pershoot kernel at 1.4ghz.
Screen rotation is extremly laggy... and many other things are laggy also.
Hi every body,
I have been searching about 2 weeks in these threads but i couldn't find my answers.
I have a T-mobile samsung vibrant phone and I am slightly amateur about changing my ROM.
1- Is there any differences between T-Mobile and Samsung vibrant except sim-Lock? Can I use the ROM which mentioned in sasung vibrant thread?
2- I have 2.1 stock- rooted without CWM recovery yet, can I flash 2.2 ? if yes how(I don't have high speed internet connection so I prefer to flash it on my phone)?
3- How can I use CM ROM? Is it required to have special bootloader or something els? what are the bugs of CM Roms?
4- Please help me,
Thank you thank you thank you
molimo said:
Hi every body,
I have been searching about 2 weeks in these threads but i couldn't find my answers.
I have a T-mobile samsung vibrant phone and I am slightly amateur about changing my ROM.
1- Is there any differences between T-Mobile and Samsung vibrant except sim-Lock? Can I use the ROM which mentioned in sasung vibrant thread?
2- I have 2.1 stock- rooted without CWM recovery yet, can I flash 2.2 ? if yes how(I don't have high speed internet connection so I prefer to flash it on my phone)?
3- How can I use CM ROM? Is it required to have special bootloader or something els? what are the bugs of CM Roms?
4- Please help me,
Thank you thank you thank you
Click to expand...
Click to collapse
Ok
1. The phone IS the Samsung Galaxy S
T-mobile Vibrant SGH-T959. It comes sim locked fro tmo but it can very easily be unlocked by an app from playstore, if youd like but isnt required to flash custom roms. So yes Samsung vibrant=T-mobile vibrant.
2. The official 2.2 from Samsung is installed through kies mini but dont do it! There probably is an official odin image floating around as well but again dont worry about that. You are at the best place to begin using custom roms. All you need is to flash cwm recovery and its go time. I will link some threads for you. **You may run into some issue not having HS internet connection as there are a lot of files that need downloaded.**
3.In order to use a CM rom, you must have a custom (CWM) recovery. As far as boots, there are froyo bootloaders and gingerbread bootloaders. Most roms are fine with froyo boots, some recommend GB boots, some require GB boots and all will work with GB boots so its best to install GB boots. Any known bugs on a custom rom are usually posted in op. Some bugs in alpha and beta builds might not have been reported yet. Thus far, cm7 7.1-2=stable, cm9=stable, cm10=stable, cm10.1=beta. I havent used it myself but check the thread for bugs.
Read this thread first! It is the vibrant bible from N00B, a must read.
http://forum.xda-developers.com/showthread.php?p=33906780
What you don't know could fill a book.
---------- Post added at 12:14 PM ---------- Previous post was at 12:04 PM ----------
Here is a guide that has directions to get cwm recovery. Use option b.
http://forum.xda-developers.com/showthread.php?p=9375927
What you don't know could fill a book.
---------- Post added at 12:17 PM ---------- Previous post was at 12:14 PM ----------
Here is the thread for GB boots. http://forum.xda-developers.com/showthread.php?p=14588896 You will need odin on your pc to do this.
Hopefully I have helped, if so hit that button.....thanks.
What you don't know could fill a book.
Hi i have a problem with my tab SC-01C docomo Galaxy Tab P1000, i cant flash overcome 4.0 with my tablet when i try to use ODIN it keeps on failing and stops in Boot.bin and will bricked, btw its Gingerbread OMKE2 already, i dont know if my bootloader is lock or what, i saw somethread here that if its already gingerbread dont use the loader because it can mess up the system, so please tell me what should i do. :crying:
rence.slvdr said:
Hi i have a problem with my tab SC-01C docomo Galaxy Tab P1000, i cant flash overcome 4.0 with my tablet when i try to use ODIN it keeps on failing and stops in Boot.bin and will bricked, btw its Gingerbread OMKE2 already, i dont know if my bootloader is lock or what, i saw somethread here that if its already gingerbread dont use the loader because it can mess up the system, so please tell me what should i do. :crying:
Click to expand...
Click to collapse
Put a link to the ROM thread so I can see if you need an ICS boot loader or any other prerequisites... I don't have this device..but I'd be more than happy to help you track down the issue
Gil81 said:
Put a link to the ROM thread so I can see if you need an ICS boot loader or any other prerequisites... I don't have this device..but I'd be more than happy to help you track down the issue
Click to expand...
Click to collapse
Here it is http://forum.xda-developers.com/showthread.php?t=2174247
rence.slvdr said:
Here it is http://forum.xda-developers.com/showthread.php?t=2174247
Click to expand...
Click to collapse
OK..from what I see. I'm betting you have a bad download. Try to download the kernel again and flash it. If you're tab is up and running you can grab the zip and flash it from recovery...just wipe cache and dalvik cache...flash kernel..but you need to make sure that kernel will boot with the ROM you have flashed...
If you're looking to just upgrade to the newest version of overcome. I would suggest you to get the zip file..wipe data,cache,dalvik cache and format system...then flash the ROM zip from recovery...
Also...are you're recoveries on this device separate from you're kernel or tied together...
---------- Post added at 10:27 AM ---------- Previous post was at 10:12 AM ----------
Edit...I just read that if you trying to flash cm 10.1...you need to restock because of the partition changes...
Gil81 said:
OK..from what I see. I'm betting you have a bad download. Try to download the kernel again and flash it. If you're tab is up and running you can grab the zip and flash it from recovery...just wipe cache and dalvik cache...flash kernel..but you need to make sure that kernel will boot with the ROM you have flashed...
If you're looking to just upgrade to the newest version of overcome. I would suggest you to get the zip file..wipe data,cache,dalvik cache and format system...then flash the ROM zip from recovery...
Also...are you're recoveries on this device separate from you're kernel or tied together...
Click to expand...
Click to collapse
Maybe i need to download new krnel, ill tell you if that will work, thanks, actually im new with flashing so i cant seem to recognize whats the difference between rom and kernel
rence.slvdr said:
Maybe i need to download new krnel, ill tell you if that will work, thanks, actually im new with flashing so i cant seem to recognize whats the difference between rom and kernel
Click to expand...
Click to collapse
OK...I suggest doing some more reading...I know it can be a pain..but with an old device its a must..good luck and let me now how it goes..
Gil81 said:
OK...I suggest doing some more reading...I know it can be a pain..but with an old device its a must..good luck and let me now how it goes..
Click to expand...
Click to collapse
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
OK...I'm not familiar with this device so let me do some more reading...Lol. I seen something about a restock...I'll get back to ya...later tonight..
---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
Second or third paragraph in the guide you linked me to...
Also, based on experience, if you want to upgrade to other ROMs in the future you will have to keep your stock GB ROM file, your gt-p1000_mr.pit, the dbdata.tar and the entire Overcome kit (kernel and ROM). You will need all of them in the future because I've found that to install a new ROM you have to repeat the entire process of restocking to GB, then installing Overcome Kernel and ROM, then installing whatever ROM you want. It sucks, but it's the only way I've seen so far.
My take on this is that you need to go back to stock GB...then overcome...I'll read more to make sure..just thought I'd share this real quick as I just seen it..
---------- Post added at 08:05 PM ---------- Previous post was at 08:00 PM ----------
rence.slvdr said:
i Already downloaded a new one, still no signs of luck. it fails again. in boot.bin
Click to expand...
Click to collapse
Read that guide you linked...man. The answers are there for you...I just read some more of it...
But basically...you need to go back to GB...but first you need to flash the pit file from Odin to repartition the partitions...then Odin the GB ROM ...then overcome..its all in that guide...read...read...read.
If you have any questions about the the process let me know...
Gil81 said:
OK...I'm not familiar with this device so let me do some more reading...Lol. I seen something about a restock...I'll get back to ya...later tonight..
---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------
Second or third paragraph in the guide you linked me to...
Also, based on experience, if you want to upgrade to other ROMs in the future you will have to keep your stock GB ROM file, your gt-p1000_mr.pit, the dbdata.tar and the entire Overcome kit (kernel and ROM). You will need all of them in the future because I've found that to install a new ROM you have to repeat the entire process of restocking to GB, then installing Overcome Kernel and ROM, then installing whatever ROM you want. It sucks, but it's the only way I've seen so far.
My take on this is that you need to go back to stock GB...then overcome...I'll read more to make sure..just thought I'd share this real quick as I just seen it..
---------- Post added at 08:05 PM ---------- Previous post was at 08:00 PM ----------
Read that guide you linked...man. The answers are there for you...I just read some more of it...
But basically...you need to go back to GB...but first you need to flash the pit file from Odin to repartition the partitions...then Odin the GB ROM ...then overcome..its all in that guide...read...read...read.
If you have any questions about the the process let me know...
Click to expand...
Click to collapse
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
rence.slvdr said:
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
Click to expand...
Click to collapse
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
rence.slvdr said:
Oh i have read it again, and it says, Go to Step 7, Step 7 is to flash the Kernel, i already in the ORIGINAL GB Stock rom is that okay? to flash overcome kernel or Flash the GB Stock safe v5 then flash the kernel?
Click to expand...
Click to collapse
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Gil81 said:
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Click to expand...
Click to collapse
Thanks, ill try it right away ill give you feedback after
Gil81 said:
If you're on stock GB .. I would assume you can flash overcome...that's how I read it...but flash the ROM. It has the kernel in it. I don't know if the overcome kernel will boot on stock GB. I didn't read that far. Maybe its a GB kernel. If it is..you can flash it..I assume.
You know what..give me a second and I'll read a bit more...don't want ya getting messed up..
---------- Post added at 11:16 PM ---------- Previous post was at 10:53 PM ----------
Man...there is a great guide with pics if you click on the Google docs link...anyway.
You need to flash the overcome 4.0 kernel tar using Odin...let it do its thing..it changing system files. It will boot. After it up...boot to that recovery and flash the wipe all zip( put this on youre device before you flash the kernel )..reboot. You should now be able to flash any ROM you want from this setup..
Click to expand...
Click to collapse
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
rence.slvdr said:
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
Click to expand...
Click to collapse
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Gil81 said:
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Click to expand...
Click to collapse
As i already convert my tab to P1000 ill try this one.. http://www.symbianize.com/showthread.php?t=780905 and give you feedback if this works.
Gil81 said:
Read the op for the cm ROM you want to install...I don't know which one you want and there are many variants out there...or send me a link to the ROM..
Also...are you flashing cm 9 just to check it out....because I seen a lot of JB ROMs in you're devices ROM thread...
FYI.,..that really where you should have post( q&a thread for galaxy tab ) but its cool...I'll help. Send me that ROM link
Click to expand...
Click to collapse
Sir im glad you help me i already make it CM9, i learned that in order to make it happen i should read and read before doing it. and now i did it:good: Thank you..
What did i do before i get to CM9:
Model Number: SC-01C
Gingerbread 2.3.3 OMKE2
1st: Flash Kernel and Rom with Overcome without flashing GB Stock Safe v5
2nd: Flash the CM9 twice as it will install the CMW first then the second is the rom,
3rd: Patience and it will Success
And also thanks to OneClick Unbrick it helps alot.
rence.slvdr said:
Sir im glad you help me i already make it CM9, i learned that in order to make it happen i should read and read before doing it. and now i did it:good: Thank you..
What did i do before i get to CM9:
Model Number: SC-01C
Gingerbread 2.3.3 OMKE2
1st: Flash Kernel and Rom with Overcome without flashing GB Stock Safe v5
2nd: Flash the CM9 twice as it will install the CMW first then the second is the rom,
3rd: Patience and it will Success
And also thanks to OneClick Unbrick it helps alot.
Click to expand...
Click to collapse
Glad you're up...its so funny... I was just checking this thread to tell you about the needed double flash..Lol.
You ninja'd me...good work.
Gil81 said:
Glad you're up...its so funny... I was just checking this thread to tell you about the needed double flash..Lol.
You ninja'd me...good work.
Click to expand...
Click to collapse
Hahaha thanks for your help sir, btw I'm new here,, how to mark this thread as solve?)
problem in converting SC-O1C to P1000
rence.slvdr said:
Sir im very thankful to you because you help me i already did it and it works my Model Change to P-1000 from SC-01C.. now i already did it do you have some idea how can change it to CM9?
Click to expand...
Click to collapse
Model Change to P-1000 from SC-01C., How is this done? Please help me.... ty ty ty