Related
I was looking for a procedure to backup my italian ROM.
My product code is GT-I9100LKATIM and i would like to debrand my phone to GT-I9100LKAITV, but i'd like to backup it before flashing.
Is there a guide in xda?
Thank you very much
Type in *#1234# on the dial pad and post the details that comes up on the screen exactly as they appear.
Intratech said:
Type in *#1234# on the dial pad and post the details that comes up on the screen exactly as they appear.
Click to expand...
Click to collapse
phone: I9100XXDJ
pda I9100AIKE1
csc: I9100TIMKE1
Same for me. I'd like back up my stock rom:
PDA: XWKE2
Phone: XXKDJ
CSC: BOGKD3
Thanks in advance.
ru5t said:
phone: I9100XXDJ
pda I9100AIKE1
csc: I9100TIMKE1
Click to expand...
Click to collapse
vanessa13006 said:
Same for me. I'd like back up my stock rom:
PDA: XWKE2
Phone: XXKDJ
CSC: BOGKD3
Thanks in advance.
Click to expand...
Click to collapse
Are these carrier firmware? Neither of them are on the firmware server.
EDIT: Vanessa I'm downloading your version now. Will link it in the dev forum.
anyone have a link or instructions on how to backup stock rom? I want to back up my stock rom before i root/update it. This is a precaution if i need to return it back for warranty purposes.
thanks
Hmm,
do mine too
PDA - XWKE2
PHONE - XXKDJ
CSC - PSKE3
hey iam from austria, on 3 ( three, hutchinson)
PDA: XWKE1
PHONE: NEKD5
CSC: DREKD3
i want to have files in some bad case to backup to the stock...
and what heppens when i flash only the insecure kernel.. i get root and insecure kernel.. but then when i flash back KE1 stock kernel... ist stock secure kernel with root? am i right?
all csc settings are still on phone?
when i want to unroot i will need just to flash with odin KE1 one more time?
please help
Maybe this could help:-
Europe Samsung I9100 Firmwares.
http://www.samfirmware.com/WEBPROTECT-i9100.htm
Hi,
It looks like the *#1234# method does not always show the real version of the firmware that is installed.
To get detailed data you have to install Kies_2.0.0.11044_11_3.exe which you can find here:
http://www.samsungapps.com/about/onPc.as
Or directly here:
http://org.downloadcenter.samsung.c...5/20110521192620273/Kies_2.0.0.11044_11_3.exe
After you install it you have to start it up and connect your SG2.
Please wait until Kies connects successfully.
Now you have to open/run regedit (e.g. "Windows-Key" + "R" to open run dialog and then type "regedit").
Go to "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1".
Here you will find the "HIDSWVER" key with the original versions.
The "ProductCode" key is also important in order to help Intratech to get the original Brand ROM.
For example this is the information you should send Intratech when asking for ROMs:
Carrier: Entel PCS Chile
*#1234#
PDA: I9100UHKD7
PHONE: I9100UHKD7
CSC: I9100CHEKD7
Build date: May 4 2011
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1]
"HIDSWVER"="I9100UHKE1/I9100CHEKE1/I9100UHKE1/I9100UHKE1"
"ProductCode"="GT-I9100LKLCHE"
Click to expand...
Click to collapse
Do it yourself:
On the other hand you can do it also by yourself using "Check Fus Downloader" from LuffarJoh:
http://forum.xda-developers.com/showthread.php?t=1032437
Here you can find the executable:
http://fus.nanzen.se/
Or directly here:
http://www.nanzen.se/download.php?id=9
You have to copy the FusCipherUtil.dll from your Kies installation (e.g. C:\Program Files (x86)\Samsung\FusCipherUtil.dll ) to the same directory as the "Check Fus Downloader".
Then you have to run "Check Fus Downloader" and set the following in the "Firmware Info" section for the above Entel PCS Chile example:
Product Code: GT-I9100LKLCHE
PDA: I9100UHKE1
CSC: I9100CHEKE1
Phone: I9100UHKE1
In the "Choose a firmware" section you have to select "GT-I9100".
Then click the "Check firmware" button.
In the example test case you will see a successful message in the "Result" section that offers you a "Download this firmware" button.
rudolf895 said:
Maybe this could help:-
Europe Samsung I9100 Firmwares.
http://www.samfirmware.com/WEBPROTECT-i9100.htm
Click to expand...
Click to collapse
zyxeu said:
Hi,
It looks like the *#1234# method does not always show the real version of the firmware that is installed.
To get detailed data you have to install Kies_2.0.0.11044_11_3.exe which you can find here:
http://www.samsungapps.com/about/onPc.as
Or directly here:
http://org.downloadcenter.samsung.c...5/20110521192620273/Kies_2.0.0.11044_11_3.exe
After you install it you have to start it up and connect your SG2.
Please wait until Kies connects successfully.
Now you have to open/run regedit (e.g. "Windows-Key" + "R" to open run dialog and then type "regedit").
Go to "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1".
Here you will find the "HIDSWVER" key with the original versions.
The "ProductCode" key is also important in order to help Intratech to get the original Brand ROM.
For example this is the information you should send Intratech when asking for ROMs:
Do it yourself:
On the other hand you can do it also by yourself using "Check Fus Downloader" from LuffarJoh:
http://forum.xda-developers.com/showthread.php?t=1032437
Here you can find the executable:
http://fus.nanzen.se/
Or directly here:
http://www.nanzen.se/download.php?id=9
You have to copy the FusCipherUtil.dll from your Kies installation (e.g. C:\Program Files (x86)\Samsung\FusCipherUtil.dll ) to the same directory as the "Check Fus Downloader".
Then you have to run "Check Fus Downloader" and set the following in the "Firmware Info" section for the above Entel PCS Chile example:
Product Code: GT-I9100LKLCHE
PDA: I9100UHKE1
CSC: I9100CHEKE1
Phone: I9100UHKE1
In the "Choose a firmware" section you have to select "GT-I9100".
Then click the "Check firmware" button.
In the example test case you will see a successful message in the "Result" section that offers you a "Download this firmware" button.
Click to expand...
Click to collapse
thx for reply but i cant find my stock ROM..
but who is Intratech?
my phone info is...
Carrier: 3 Austria (Three,Hutchinson)
PDA: I9100XWKE1
PHONE: I9100NEKD5
CSC: I9100DREKD3
Buid date: May 3 2011
HIDSWVER: I9100XWKE1/I9100DREKD3/I9100NEKD5/I9100XWKE1
ProductCode: GT-I9100LKADRE
can some one give me link where to find stock files...
thx
milance86 said:
thx for reply but i cant find my stock ROM..
but who is Intratech?
my phone info is...
Carrier: 3 Austria (Three,Hutchinson)
PDA: I9100XWKE1
PHONE: I9100NEKD5
CSC: I9100DREKD3
Buid date: May 3 2011
HIDSWVER: I9100XWKE1/I9100DREKD3/I9100NEKD5/I9100XWKE1
ProductCode: GT-I9100LKADRE
can some one give me link where to find stock files...
thx
Click to expand...
Click to collapse
For some reason 3 Austria have not authorised the release of the firmware on FUS so it's now available to download.
Can you tell me if this firmware is anywhere available -/ should be a non-branded EU FW, isnt it?
PDF: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100ATOKD1
Build Info: Fri May 6 07:48:55 KST 2011
netrider01 said:
Can you tell me if this firmware is anywhere available -/ should be a non-branded EU FW, isnt it?
PDF: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100ATOKD1
Build Info: Fri May 6 07:48:55 KST 2011
Click to expand...
Click to collapse
I'll upload it after I get in later.
Would be great thx in advance!
Could use this to go back to my stock if sth happens to my device.
Yes.
10 char
Ok, getting it uploaded now. Link will be posted in the thread in the dev forum.
edit: Now available under the XWKE2 section for download in the firmware thread.
Great work! THX A LOT!
Have you done mine too?
Carrier: Optus Australia
PDA - XWKE2
PHONE - XXKDJ
CSC - PSKE3
+1 for the optus australia
thanks
Dear all,
I am new to this valuable forum & resource. I have been searching within the forum for the past few days & I am looking for help please. I have the following SGSII:
PDA: I9100JPKG3
Phone: I9100XXKG1
CSC: Unknown
Product code: GT-I9100LKADAM
Kernel version:
2.6.35.7-I9100JPKG3-CL388633
[email protected] #2
Build Info: Sun Jul 17, 2011 13:52:14 KST 2011
I have the following simple questions:
1. I have extensively searched the forum, & I couldn't find any information about this firmware JPKG3! I only found JPKG2 & JPKG5. Is my mobile's firmware official although I bought it from an official reseller in my country?
2. The CSC is unknown & I found a post by Intratech providing the CSC file: "csc_xsg_i9100ojpkg1" for Arabic language. Is is possible to use Odin to flash my SGSII with this CSC file only? And if I flash it, will I solve the "Unknown" issue? Do I need to backup my data? Will the data be wiped out?
3. I also could not find the product code GT-I9100LKADAM throughout the whole website! Any help on that?
4. The Kernel version mentioned above is a bit weird. Is the firmware rooted? I personally didn't do so knowing that i bought the mobile brand new.
5. If I updated to the newer version JPKG5 using Odin, will I solve the Unknown CSC & Kernel issues? Also, will my data be wiped out?
6. Kies does not recognize my mobile! Any help? Is it because of this firmware?
I would really appreciate your valuable help on the above questions. Thanks in advance.
Just flash the JPKG5 from the firmware thread, it's the latest firmware for your device and the DAM CSC is included as the package is a multi-CSC one.
Intratech said:
Just flash the JPKG5 from the firmware thread, it's the latest firmware for your device and the DAM CSC is included as the package is a multi-CSC one.
Click to expand...
Click to collapse
Thanks Intratech for your quick reply. Honestly, I wanted to thank you for your post on the official firmwares but I couldn't do it there since I'm still new... I enjoyed & benefited a lot in every post your wrote It's a master piece...
What about the Kernel issue? Is my current one rooted? If yes, will it be solved when I flash to JPKG5?
Also, what about the product code? I couldn't find anything related to it anywhere! Is it because it's still new in my country?
Finally, after I flash to JPKG5, will Kies recognize my phone?
Thank you Intratech for your valuable help...
No, it's not rooted despite the label however flashing the kernel will update it to the newer kernel. DAM product code is covered by the firmware, if you look in the bracket you will see a list of the CSC covered and DAM is included.
Intratech said:
No, it's not rooted despite the label however flashing the kernel will update it to the newer kernel. DAM product code is covered by the firmware, if you look in the bracket you will see a list of the CSC covered and DAM is included.
Click to expand...
Click to collapse
Dear Intratech,
I followed your procedures at the original post & flashed JPKG5 with Odin. Everything went fine & smooth. However, when I tried to change the CSC I got the following list: (XSS, XSG, WAN, TUN, THR, PAK, OTU, MWD, MMC, MID, MED, MAT, LEV, KSA, EGY, BTC, AFG, ABS). It's different than the list mentioned in your post & there is no DAM in it. So what can I do now? Is there a firmware that contains DAM? By the way, I do not know for which country/region DAM stands for? Can you help please? So I currently used the LEV CSC which is the closest to my country!
My updated device data are the following:
Product Code: GT-I9100LKALEV
PDA: I9100JPKG5
Phone: I9100XXKG1
CSC: I9100OJPKG1
Build Info: Thu Jul 28 19:58:32 KST 2011
Kernel version:
2.6.35.7-I9100JPKG5-CL428948
[email protected] #2
Additionally, when I use Kies, I get: "This version of the device cannot be updated." However, it recognizes it as PDA:KG5 / PDA:KG1 / CSC:KG1 (LEV). Does this mean I can no longer update the firmware through Kies?
Can you please help on the above issues? It's much appreciated. Thanks.
prince.marvin said:
Dear Intratech,
I followed your procedures at the original post & flashed JPKG5 with Odin. Everything went fine & smooth. However, when I tried to change the CSC I got the following list: (XSS, XSG, WAN, TUN, THR, PAK, OTU, MWD, MMC, MID, MED, MAT, LEV, KSA, EGY, BTC, AFG, ABS). It's different than the list mentioned in your post & there is no DAM in it. So what can I do now? Is there a firmware that contains DAM? By the way, I do not know for which country/region DAM stands for? Can you help please? So I currently used the LEV CSC which is the closest to my country!
My updated device data are the following:
Product Code: GT-I9100LKALEV
PDA: I9100JPKG5
Phone: I9100XXKG1
CSC: I9100OJPKG1
Build Info: Thu Jul 28 19:58:32 KST 2011
Kernel version:
2.6.35.7-I9100JPKG5-CL428948
[email protected] #2
Additionally, when I use Kies, I get: "This version of the device cannot be updated." However, it recognizes it as PDA:KG5 / PDA:KG1 / CSC:KG1 (LEV). Does this mean I can no longer update the firmware through Kies?
Can you please help on the above issues? It's much appreciated. Thanks.
Click to expand...
Click to collapse
I will investigate this for you. Once there is a newer firmware for your device then KIES will allow you to update.
Intratech said:
I will investigate this for you. Once there is a newer firmware for your device then KIES will allow you to update.
Click to expand...
Click to collapse
Thank you Intratech... You are such an amazing & helpful person...
Hello
I've bought a new Galaxy SII recently, and faced a problem with the market, it crashes and not a single solution I read on the internet has helped me.
I've thought if I upgrade to 2.3.4 from 2.3.3 it could solve the problem, KIES doesn't offer me any upgrade.
My firmware is specific to the Middle East, it includes support for Arabic keyboard.
Now I have two questions after I've read the topic Official i9100 Firmwares KF1/2/3/4/, KG1/2/3/5/6/7, KH1/2/3/4 Download
1) If I upgrade to a version which isn't specific to the Middle East, will I lose the support for Arabic keyboard?
2) Should I be strict to the phone baseband version?
Baseband version: XXKG5
Build Number: JPKH1
In another word, should I choose the versions for Baseband XXKG5 only from that thread?
1. If you use a version that is not specific to the middle east, you will lose your arabic support but there are now mods where you can add arabic support to any rom.
2. Baseband equals modems that you can change, you might find better reception with a newer modem.
3. csc which contains the information for connecting to the internet, you will need to keep the same :
Regarding CSC, I can add IPNs on my own, so it doesn't matter for me then?
Thank you
Post the specifics of your current firmware. Input *#1234# in the dialpad and post the details as they appear on here.
JPKH1 is Arabic firmware
Here's the output
PDA: I9100JPKH1
PHONE: I9100XXKG5
CSC: I9100JPKH1
Build Info: Fri Aug 5 13:34:05 KST 2011
Sorry guys not wanting to hijack the thread, been searching for similar answers...
PDA: I9100XWKF3
PHONE: I9100XXKH3
CSC: I9100CPWKD1
I'm rooted using CF matched Kernel and have remained on that, does no harm as far as i'm aware except for yellow triangle at boot..
I'd like to go from 2.3.3 to 2.3.4 too and wondering about what to flash and what would fit, my CSC is Carphone Warehouse would that be correct? How important is it to match CSC?
Regards Baseband, doesn't really matter does it?
And firmware, thought about Frankenstein XXKF3 or 4 or am I getting things totally wrong?
And on that note, does the firmware version stiplulate which ROM I can load?
Milado said:
Here's the output
PDA: I9100JPKH1
PHONE: I9100XXKG5
CSC: I9100JPKH1
Build Info: Fri Aug 5 13:34:05 KST 2011
Click to expand...
Click to collapse
Ok. Try clearing the market data under manage applications and see if that works.
If you're not using an Arabic firmware you won't have Arabic language support.
I tried it many times, it just doesn't work, I tried to do factory reset, installed a newer version (3.0.26 & 3.0.27) I moved MarketUpdater.apk (someone said it works). Nothing at all was useful to me. I want to have the complete experience, I want to access the market, but it doesn't work!!
I have the same problem in my fiancee's X8 xperia too.
I don't know if it's related to my country (market isn't available here, it's forbidden here). I rooted my device and installed & configured SSH Tunnel, I sniffed the network and made sure that it connects through the ssh tunnel, but it crashes every time.
---------- Post added at 10:13 PM ---------- Previous post was at 09:33 PM ----------
I'm going to download this GT-I9100_XSG_I9100JPKH1_I9100XXKG5_I9100OJPKH1.exe and install it, to restore the phone to its default status.
I should do it in Odin using the PDA box, right?
I've finished the restore of the original firmware, it didn't help the app still crashes!!
Sound like it's been sabotaged. We need an Android intifada in your country to stop the oppression against the Android market.
There is already intifada in Syria
But not Android intifada though.
BTW, Stay safe.
heres a list of firmwares.You should be able to find a modem that might be suitable
http://forum.xda-developers.com/showthread.php?t=1075278
heres the cf-root list
http://forum.xda-developers.com/showthread.php?t=1103399
hope you can sort it out.
Hi there,
I currently purchased a new SG3. It has the vodafone branding which I want to change. When I do the *#1234# it shows me the following:
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
Am I able to change the software/firmware from Vodafone to the Telstra one located on Sammobile. Im unable to post outside links but heres a copy of whats available on sammobile.
Firmwares for GT-I9300T - All (10 latest)
Country/Carrier Date Android PDA CSC
Australia (Telstra) 2012 June 4.0.4 I9300TDUALF2 I9300TTELALF2
Australia (Telstra) 2012 May 4.0.4 I9300TDUALE6 I9300TTELALE6
I got no idea how all this rooting stuff works. Im trying to learn but I can get my head around it. So sorry if any of my questions seem stupid. Thanks for all your help in advance.
No need rooting to flash.
And yes you can flash Telstra firmware on Voda model, they are the same hardwares.
You need Odin 3.04 and need samsung usb driver or if you already have it working with Kies, then no worries about driver.
Here I copied the general instruction from the UK thread:
Instructions For Flashing Firmware:
Extract the firmware
Launch Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Thanks mate. Am downloading the firmware now. Its gonna take 2 hours to download.
Am I meant to change any of the options in Odin3?
Thanks again.
Now that I have flashed my galaxy s3 successfully.
I keep getting the message "Unfortunately, Messaging has stopped"
Does anyone know what this is or can direct me into the right place? Ive done a factory reset as another thread recommended but didnt work.
Thanks
Hello everyone,
My phone details are as follows:
I9100XWLPT
Base Firmware: I9100XWLPT (4.0.4)
Region: Europe
Country United Kingdom / Ireland
Carrier: Unbranded
Build Date: 27 July 2012
Modem: XXLQ6
CSC: XEULPA
And this is supported by networks in my region (Pakistan). But unfortunately this has the emmc brick bug as well. If I flash the following firmware using Odin then what kinda issues I will have to face? Will my network support it? And do I need to make a backup of efs folder before flashing? How can I choose the right firmware? PLEASE GUIDE I HAVE NO IDEA.
I9100XXLPQ
Base Firmware: I9100XXLPQ (4.0.3)
Region Poland (XEO)
Build Date: 9th March 2012
Modem: XXLPQ
CSC: OXALPQ
Thanks in advance!
shahrozeumar said:
Hello everyone,
My phone details are as follows:
I9100XWLPT
Base Firmware: I9100XWLPT (4.0.4)
Region: Europe
Country United Kingdom / Ireland
Carrier: Unbranded
Build Date: 27 July 2012
Modem: XXLQ6
CSC: XEULPA
And this is supported by networks in my region (Pakistan). But unfortunately this has the emmc brick bug as well. If I flash the following firmware using Odin then what kinda issues I will have to face? Will my network support it? And do I need to make a backup of efs folder before flashing? How can I choose the right firmware? PLEASE GUIDE I HAVE NO IDEA.
I9100XXLPQ
Base Firmware: I9100XXLPQ (4.0.3)
Region Poland (XEO)
Build Date: 9th March 2012
Modem: XXLPQ
CSC: OXALPQ
Thanks in advance!
Click to expand...
Click to collapse
You need to do some searching by yourself, that is what the search function is for. EPS Pro for backing up EFS folder: http://forum.xda-developers.com/showthread.php?t=1308546 Make a backup before flashing Siyah Kernel, and make sure you have root in order for backup to work.
You can just flash Siyah Kernel v4.1.5 via Odin to prevent brickbug in ICS v4.0.4. Look at my rooting guide in my sig, just change the CF-Root file with Siyah Kernel. Refer here: www.gokhanmoral.com/public/files/siyahkernel/v4/Siyah-s2-v4.1.5.tar
In case you are unsure what brickbug is, the stock 4.0.4 kernel has MMC_CAP_ERASE enabled which bricks your phone when a wipe data command is used in stock recovery. Siyah kernel deals with this by disabling MMC_CAP_ERASE. This command needs to be enabled for the brick to occur, so don't worry about having to change your ROM.
But if I plan to unroot my phone latter on then I will have to get it back on stock and If I flash the same stock 4.0.4 then I wont be able to wipe data thats why I was asking about LPQ. Will it work for me?
shahrozeumar said:
But if I plan to unroot my phone latter on then I will have to get it back on stock and If I flash the same stock 4.0.4 then I wont be able to wipe data thats why I was asking about LPQ. Will it work for me?
Click to expand...
Click to collapse
Well if you wished to unroot it and return it to stock 4.0.4 again, you would just be where you are now. Yes, you can flash 4.0.3 if you want, although I struggle to understand why you would return it to stock at a later date anyway.
If your network struggles to pick up a good signal on it, there are many modems out there that you can flash to make your network signal stronger. Refer here: http://forum.xda-developers.com/showthread.php?t=1131950