[NEED HELP] Can't install official rom!! - HTC EVO 3D

Hi!
I've a big problem with my new Evo3D GSM!
After installing my first custom rom (http://forum.xda-developers.com/showthread.php?t=1318942) the wifi goes in error, like some persons here. So, I would like to revert to officiel rom but I can't!
If I launch RUU with my phone is on Android, RUU can't launch bootloader (Error 155), and I try to put my phone into fastboot mode, then RUU begin but error 155 again during sending data :-/
Apparently, the image was wrong... but it's the official ruu, and I've already flash this before S-Off!!
Please help!!
This is what I've do on my phone : (at beginning, I've original rom, with update OTA and S-On)
- Install official ruu RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.90 20.00_10.13.9020.08_2M_release_203403_signed
- Unlock with htcdev.com
- Install CWM
- Install custom rom
How can I flash official rom again?
Thanks in advance!!
//Edit : Success!!!! Just need to relock the phone! lol... Maybe this post can be useful for someone... ^_^

Related

[Q] htc dev unlock flash custom rom

Hello experts
I recently updated my unbranded evo 3D to official ICS , it has a lebanese sim card so im guessing its gsm not CDMA ?
I managed to unlock the bootloader thanks to htcdev(dot)com now its unlocked
My hboot version is 1.53.007 and i dont know how to root and i dont want to try the wire trick cz its so hard and i dont want to ruin my lovely EVO 3D htcdev said that i can install custom rom after unlocking the bootloader by installing the boot.img and installing the rom i dont know :/ can someone plz explain me how step by step
how to flash a rom to an unlocked with s on ics hboot 1.53.007 evo 3d ?
thanks in advance
You need to flash a custom recovery such as 4-ext (find it in EVO3d GSM dev section).
Once you have that, download any ICS-based ROM to your SD card and flash it via recovery menu. Then you will have root.
I m not sure if you can achieve root on the stock phone, using the superuser zip,but i hope i helped
Hi,
I'm intrested in too, but are you sure, that this is everything what he have to do, when he want to flashed new rom? Because I am in this situation too. I have unlocked my EVO via htcdev, S-ON and HBOOT 1.53.0007.
It would be great if someone has a more detailed tutorial how to do that.
Thanx and sorry for my bad english
plz we need an expert
i have managed to flash CWM using fastboot commands (fastboot flash recovery recovery.img) but everytime i flash a custom i get stuck on the custom rom animation and when i flash the custom rom boot.img in fastboot the keeps restarting plzzz help mee:crying:
I have a CDMA HTC Unlock Guide in my signature that will explain the step by step. Keep in mind that you would need to use the correct GSM versions (shooterU) of the files, but the process is exactly the same.
- HTC unlock
- install custom "gsm" recovery via fastboot commands.
(fastboot flash recovery yourRecoveryFilename.img)
- boot/enter recovery via fastboot commands.
(fastboot boot yourRecoveryfilename.img)
- install current superuser & binaries zip(3.0.7) from recovery.
- reboot & you are rooted on stock Rom.
Note: you must enter recovery via the fastboot command prompt to avoid bootloop Issues with kernel (you can install 4ext Recovery as a workaround to this later). See the stickies in the gsm section for links or start with this thread: http://forum.xda-developers.com/showthread.php?p=24054039
Sent from my "Up all night, Sleep all day" EVO3D!
worked
yeah i know i have already flash recovery via fastboot and now i am running evolver 3D rom looks like i can flash any rom with stock kernel roms with custom kernels just dont work , is there any sense 4 rom based on stock kernel ? the kernel 3.0.16
And did you do something with firmware?
Because here: http://forum.xda-developers.com/showpost.php?p=28448379&postcount=572 this user wrote me, that I need to downgrade my firmware. So, now, I don't know If I have to do that with firmware or I can only flash recovery and use rom which I want.
just flash it
some roms are booting and working some are not , i hope someone will help us and tell us which roms do work and how , i am running evolver 3D and its working fine just do a full wipe and flash it in recovery and enjoy
yea, I was looking for some advice but nothing :/ Still I don't know whitch rom would be run with S-on and whitch not.
there u go
bro evolver 3D booted fine on my phone and i am using it will work on yours and nonsense 3.1.0 worked but wifi is broken and yodas ics v4.5 works hit the thank button if i helped and if u find anything about s-off or other roms that work plz PM me

Update HBOOT from mySENSE RC3

Hi,
I am currently running mySENSE RC3 with HBOOT 1.24, TWRP 2.4.1.0, Baseband HTC_102.
I´d like to update to myONE, with new HBOOT and recovery. I was already reading lots of post but the problem is that there is too much information. Can someone give me a step by step how i can update HBOOT?
You should go back to stock and do the JB OTA update.
As your cid is HTC__102, you should have a JB update by now
Once you've done this, you can install any JB ROM or any ROM that you like
ckpv5 said:
You should go back to stock and do the JB OTA update.
As your cid is HTC__102, you should have a JB update by now
Once you've done this, you can install any JB ROM or any ROM that you like
Click to expand...
Click to collapse
Ok thanks for that. So i have to follow this guide?
http://forum.xda-developers.com/showpost.php?p=36138826&postcount=2
in short terms:
1) install stock recovery
2) lock bootloader
3) install RUU (i have no nand backup)
Is that correct? If yes my last question would be where can i get the RUU. I thin i need this one:
RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10 .21.40.06U_1.10.40.23_release_295191.exe
From here: http://forum.xda-developers.com/showthread.php?t=2120792
Regards
Download your RUU RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10 .21.40.06U_1.10.40.23_release_295191.exe
(You can download the RUU here : http://androidfiles.org/ruu/?developer=Proto)
Steps :
1. Put your device in bootloader mode then relock the bootloader - fastboot oem lock
2. Still in bootloader mode - run the RUU, follow the instruction, next,next, update, update blablabla and let it finish and reboot then do the JB OTA.
No need reinstall stock recovery or boot.img or whatever before the above steps.
Note : After 1.18.401.1 there will be OTA 1.18.401.3 then only JB OTA
Working fine, thanks for your advice!

[Q] Updating by restoring backup

OK, so I need some help
When I first unlocked my DX, I made a CWM backup of the ROM.
Recently I noticed that there are a few newer JB ROMS that Id like to try, but Im on HBOOT 1.24.0000, and whilst using the Custom ROM, unable to update via OTA.
Ive spent a hour or so trying to restore the backup and run OTA, which has worked up to a point.
Heres what Ive done so far.
- Restored by CWM backup (had to fix a MD5 problem)
- Rebooted and OTA downloaded OTA_PROTO_U_ICS_40A_hTC_Asia_WWE_1.18.707.3-1.18.707.1_release_300978id119tizxreo6g0l.zip
- Asked if wanted to update...YES!! I said
- Restarted into CWM and an error about not being able to mount SDCARD
- tried to flash the ZIP file manually and get the check_cid asset failed error (CID mismatch I think).
My CID is HTC_044, but if Im using a backed up ROM from my phone, and OTA is downloading it, why wont it install?
I've also tried relocking (fastboot oem lock) and all it does it reboot back into fastboot (assume there must be something wrong with the ROM backup?).
I can see there are no official region 044 RUU's so what can I do (if anything)?
Can anyone help me out?
Thanks
chocyman said:
OK, so I need some help
When I first unlocked my DX, I made a CWM backup of the ROM.
Recently I noticed that there are a few newer JB ROMS that Id like to try, but Im on HBOOT 1.24.0000, and whilst using the Custom ROM, unable to update via OTA.
Ive spent a hour or so trying to restore the backup and run OTA, which has worked up to a point.
Heres what Ive done so far.
- Restored by CWM backup (had to fix a MD5 problem)
- Rebooted and OTA downloaded OTA_PROTO_U_ICS_40A_hTC_Asia_WWE_1.18.707.3-1.18.707.1_release_300978id119tizxreo6g0l.zip
- Asked if wanted to update...YES!! I said
- Restarted into CWM and an error about not being able to mount SDCARD
- tried to flash the ZIP file manually and get the check_cid asset failed error (CID mismatch I think).
My CID is HTC_044, but if Im using a backed up ROM from my phone, and OTA is downloading it, why wont it install?
I've also tried relocking (fastboot oem lock) and all it does it reboot back into fastboot (assume there must be something wrong with the ROM backup?).
I can see there are no official region 044 RUU's so what can I do (if anything)?
Can anyone help me out?
Thanks
Click to expand...
Click to collapse
Since you are now on a Stock ROM, You just have to flash the Stock Recovery then the OTA will install else it will keep restarting into the custom recovery.
chocyman said:
OK, so I need some help
When I first unlocked my DX, I made a CWM backup of the ROM.
Recently I noticed that there are a few newer JB ROMS that Id like to try, but Im on HBOOT 1.24.0000, and whilst using the Custom ROM, unable to update via OTA.
Ive spent a hour or so trying to restore the backup and run OTA, which has worked up to a point.
Heres what Ive done so far.
- Restored by CWM backup (had to fix a MD5 problem)
- Rebooted and OTA downloaded OTA_PROTO_U_ICS_40A_hTC_Asia_WWE_1.18.707.3-1.18.707.1_release_300978id119tizxreo6g0l.zip
- Asked if wanted to update...YES!! I said
- Restarted into CWM and an error about not being able to mount SDCARD
- tried to flash the ZIP file manually and get the check_cid asset failed error (CID mismatch I think).
My CID is HTC_044, but if Im using a backed up ROM from my phone, and OTA is downloading it, why wont it install?
I've also tried relocking (fastboot oem lock) and all it does it reboot back into fastboot (assume there must be something wrong with the ROM backup?).
I can see there are no official region 044 RUU's so what can I do (if anything)?
Can anyone help me out?
Thanks
Click to expand...
Click to collapse
Here is all the info you need to run OTA (In the first 3 posts):
http://forum.xda-developers.com/showthread.php?t=2210619&highlight=nandroid+ics
GtrCraft said:
Here is all the info you need to run OTA (In the first 3 posts):
http://forum.xda-developers.com/showthread.php?t=2210619&highlight=nandroid+ics
Click to expand...
Click to collapse
Thanks you
And thanks for the OP - ckpv5 - for writing that excellent guide.
It all worked flawlessly :good:

[Q] ICS to JB Hboot how to?

Please help, I've been looking for hours, I cannot install a custom rom (mySENSEdx5) I have an unlocked bootloader and have been running a custom ICS rom. the problem is I cannot update my bootloader from ICS to 1.25.0002 , is there anyway to update just the hboot?
Thank you
HairyJoe said:
Please help, I've been looking for hours, I cannot install a custom rom (mySENSEdx5) I have an unlocked bootloader and have been running a custom ICS rom. the problem is I cannot update my bootloader from ICS to 1.25.0002 , is there anyway to update just the hboot?
Thank you
Click to expand...
Click to collapse
Yes there is. S-OFF your phone via rumrunner (just Google... you'll land at their site and follow the instructions there). Then have a look at this: http://forum.xda-developers.com/showpost.php?p=50190792&postcount=47
dansou901 said:
Yes there is. S-OFF your phone via rumrunner (just Google... you'll land at their site and follow the instructions there). Then have a look at this: http://forum.xda-developers.com/showpost.php?p=50190792&postcount=47
Click to expand...
Click to collapse
Several attempts to use rum runner but it just keeps on pouring (past 10 attempts)and no S-OFF , I have now managed to put TWRP V6.3.0 recovery on my phone and did a wipe and tried to install the JB rom that failed! now I have no OS and TWRP wont install my backup.. I'm well stuck ! Is it possible to unbrick the phone in this state?
HairyJoe said:
Several attempts to use rum runner but it just keeps on pouring (past 10 attempts)and no S-OFF , I have now managed to put TWRP V6.3.0 recovery on my phone and did a wipe and tried to install the JB rom that failed! now I have no OS and TWRP wont install my backup.. I'm well stuck ! Is it possible to unbrick the phone in this state?
Click to expand...
Click to collapse
First of all, u cant flash jb recovery on ics hboot, u need to flash ics recovery which is here - http://d-h.st/eCC .
And download any ics Rom & ics kernel & flash it.
- ( Ics Recovery for ics hboot)
- ( Ics Rom for ics hboot)
- ( Ics kernel for ics hboot)
Then after all that ,view all the instructions & prerequisites required for S-off & start it.
(Most important one is disable all lockscreens)

[Q] need stock recovery and boot.img for htc one x+

Hi guys. can someone give me a download link for the stock recovery file and the boot.img file? I need to install the RUU for my enrc2b. since i have installed many custom roms and current is android revolution HD i cant install RUU by any procedure. the RUU always gives me some errors. I also tried to get the ROM.zip file extracted from the RUU file but it does not work anymore since HTC blocked it or something. pleaseeee help.
Just up the thread.
frrobin said:
Hi guys. can someone give me a download link for the stock recovery file and the boot.img file? I need to install the RUU for my enrc2b. since i have installed many custom roms and current is android revolution HD i cant install RUU by any procedure. the RUU always gives me some errors. I also tried to get the ROM.zip file extracted from the RUU file but it does not work anymore since HTC blocked it or something. pleaseeee help.
Click to expand...
Click to collapse
I'm also in need of the files just like the other person mentioned.
Currenly my HTC One X+ is runnning CM11 nightly build and wanted to flash back to stock.
What version of HBOOT and RADIO do you see in the FASTBOOT menu?
This is the stock recovery with 2.18.401.3:
https://yadi.sk/d/pgAzfBwhT562e
This is the stock 2.18.401.2 rom with inside the stock kernel (boot.img) to flash via fastboot:
https://docs.google.com/file/d/0B7yPonjCRjRrdnNUeDRNXzZyLXM/edit?pli=1
I think that the bootloader must be re-locked for the RUU
I hope it works! I stay tuned for any feedback

Categories

Resources