Hi,
I am currently running mySENSE RC3 with HBOOT 1.24, TWRP 2.4.1.0, Baseband HTC_102.
I´d like to update to myONE, with new HBOOT and recovery. I was already reading lots of post but the problem is that there is too much information. Can someone give me a step by step how i can update HBOOT?
You should go back to stock and do the JB OTA update.
As your cid is HTC__102, you should have a JB update by now
Once you've done this, you can install any JB ROM or any ROM that you like
ckpv5 said:
You should go back to stock and do the JB OTA update.
As your cid is HTC__102, you should have a JB update by now
Once you've done this, you can install any JB ROM or any ROM that you like
Click to expand...
Click to collapse
Ok thanks for that. So i have to follow this guide?
http://forum.xda-developers.com/showpost.php?p=36138826&postcount=2
in short terms:
1) install stock recovery
2) lock bootloader
3) install RUU (i have no nand backup)
Is that correct? If yes my last question would be where can i get the RUU. I thin i need this one:
RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10 .21.40.06U_1.10.40.23_release_295191.exe
From here: http://forum.xda-developers.com/showthread.php?t=2120792
Regards
Download your RUU RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10 .21.40.06U_1.10.40.23_release_295191.exe
(You can download the RUU here : http://androidfiles.org/ruu/?developer=Proto)
Steps :
1. Put your device in bootloader mode then relock the bootloader - fastboot oem lock
2. Still in bootloader mode - run the RUU, follow the instruction, next,next, update, update blablabla and let it finish and reboot then do the JB OTA.
No need reinstall stock recovery or boot.img or whatever before the above steps.
Note : After 1.18.401.1 there will be OTA 1.18.401.3 then only JB OTA
Working fine, thanks for your advice!
Related
Hi!
I've a big problem with my new Evo3D GSM!
After installing my first custom rom (http://forum.xda-developers.com/showthread.php?t=1318942) the wifi goes in error, like some persons here. So, I would like to revert to officiel rom but I can't!
If I launch RUU with my phone is on Android, RUU can't launch bootloader (Error 155), and I try to put my phone into fastboot mode, then RUU begin but error 155 again during sending data :-/
Apparently, the image was wrong... but it's the official ruu, and I've already flash this before S-Off!!
Please help!!
This is what I've do on my phone : (at beginning, I've original rom, with update OTA and S-On)
- Install official ruu RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.90 20.00_10.13.9020.08_2M_release_203403_signed
- Unlock with htcdev.com
- Install CWM
- Install custom rom
How can I flash official rom again?
Thanks in advance!!
//Edit : Success!!!! Just need to relock the phone! lol... Maybe this post can be useful for someone... ^_^
Hi,to everyone:
so,i'm newb,and i dont leave in the us,and i'm a proud owner of a Droid Dna.
As i dont be on the us,i cant have na OTA update,so i'm stock 1.15
And i have a few questions,help:
1) I'm going to do the Unlock using the Supercid,and do the htcdev process.
flash a new recovery,and install superuser.Correct?
the questions are:
1) Doing the unlock,i can place a ROM even the stock rom (deodexed or other)?
2) The process will be: remove the boot.img from the rom zip file
flash it manually,and them place the rom.zip file on the phone and flash it in recovery.
I think that the rom will not have the new kernel,so i think that i have to install it manually,will i be unrooted?
In this Post http://forum.xda-developers.com/showthread.php?t=2080200) it says that is the new update Rom,but does it have the original kernel,or i have to install it via recovery or manually??
Thanks for all the help you guys can give me!
sued said:
Hi,to everyone:
so,i'm newb,and i dont leave in the us,and i'm a proud owner of a Droid Dna.
As i dont be on the us,i cant have na OTA update,so i'm stock 1.15
And i have a few questions,help:
1) I'm going to do the Unlock using the Supercid,and do the htcdev process.
flash a new recovery,and install superuser.Correct?
the questions are:
1) Doing the unlock,i can place a ROM even the stock rom (deodexed or other)?
2) The process will be: remove the boot.img from the rom zip file
flash it manually,and them place the rom.zip file on the phone and flash it in recovery.
I think that the rom will not have the new kernel,so i think that i have to install it manually,will i be unrooted?
In this Post http://forum.xda-developers.com/showthread.php?t=2080200) it says that is the new update Rom,but does it have the original kernel,or i have to install it via recovery or manually??
Thanks for all the help you guys can give me!
Click to expand...
Click to collapse
1, I believe the answer is yes
2. In most cases, the boot.img is provided along with the rom as a separate download so no need of extraction. It has to be flashed using adb from your pc -usually right before you install the rom.
3. If you allow the ota update before you root you can not root, If after you've rooted and bootloader is unlocked, it will download but won't install-at least it did not for me. If you relock the bootloader and flash a to stock, I heard you can get the ota but you will not be able to unlock it again. Not sure on that part. Rumor says that this will get fixed soon but as f right now no.
Thanks
rootntootn said:
1, I believe the answer is yes
2. In most cases, the boot.img is provided along with the rom as a separate download so no need of extraction. It has to be flashed using adb from your pc -usually right before you install the rom.
3. If you allow the ota update before you root you can not root, If after you've rooted and bootloader is unlocked, it will download but won't install-at least it did not for me. If you relock the bootloader and flash a to stock, I heard you can get the ota but you will not be able to unlock it again. Not sure on that part. Rumor says that this will get fixed soon but as f right now no.
Click to expand...
Click to collapse
Thanks for your hep,at least you give me a hand.
I thank you from my heart
Reading so many bricked TF201 I dont want to make a mistake.
I just got my tablet second hand from craigslist.
I want to flash custom rom, probably Hairy Bean.
Can someone verify if the steps I need to follow are correct ?
1. install TWRP via Fastboot
2. install Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip (using TWRP)
3. install Hair Bean Rom V2.2 (using TWRP)
For step 1:
I think I need to follow post # 2 on this thread ?
http://forum.xda-developers.com/showthread.php?t=1674827
NOTE** You MUST be on the JB 4.1.1 bootloader to be able to flash these files. DO NOT FLASH THESE ON THE 4.2.1 BOOTLOADER AS THEY CAN BRICK YOU
Download one of the files below for your install type (normal or data2sd)
Extract folder on PC and run the "HairyBean TWRP Recovery Flasher.bat" file.
Follow the on screen instructions.
Delete TWRP settings from sdcard and external sdcard. (/TWRP/.twrps and .version)
Click to expand...
Click to collapse
Questions:
Q1 what does it mean JB 4.1.1 bootloader ? how do I find out what boot loader I am on. I have stock JB 4.1.1, does that mean I am on the JB 4.1.1 bootloader ?
Q2. whats the difference between normal and data2sd TWRP ?
Q3 Do I need ADB SDK ?
Q4 how do I "Delete TWRP settings from sdcard and external sdcard" and what is that for ?
Another question. After I flash TWRP recovery.
on this thread http://forum.xda-developers.com/showthread.php?t=1674827
post #1 it talks about installing the bootloader first before the rom
kinda confused, what does the "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" do ? Isnt TWRP already the recovery ?
Another questiion. Do I need to unlock the bootloader in order to flash TWRP ?
vanguy2009 said:
Another questiion. Do I need to unlock the bootloader in order to flash TWRP ?
Click to expand...
Click to collapse
Yes
---------- Post added at 07:30 AM ---------- Previous post was at 07:28 AM ----------
vanguy2009 said:
Another question. After I flash TWRP recovery.
on this thread http://forum.xda-developers.com/showthread.php?t=1674827
post #1 it talks about installing the bootloader first before the rom
kinda confused, what does the "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" do ? Isnt TWRP already the recovery ?
Click to expand...
Click to collapse
You will need to install the bootloader and twrp package (they're together) let it reboot then install the ROM.
sbdags said:
You will need to install the bootloader and twrp package (they're together) let it reboot then install the ROM.
Click to expand...
Click to collapse
So if the bootloader and twrp package is together, do I still need to flash TWRP first via fastboot or is there a way to flash "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" without installing TWRP first ?
very confusing instructions, normally I would do trial and error but since this tablet is easily bricked I would really want to make sure of the steps before I do anything. If someone can shed some light on the correct steps, it would be highly appreciated.
Basically I have a stock TF201 with stock jelly bean 4.1.1 that I would like to flash to Hairy Bean 2.2. If anyone can clarify the steps I would really appreciate it.
vanguy2009 said:
So if the bootloader and twrp package is together, do I still need to flash TWRP first via fastboot or is there a way to flash "Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip" without installing TWRP first ?
very confusing instructions, normally I would do trial and error but since this tablet is easily bricked I would really want to make sure of the steps before I do anything. If someone can shed some light on the correct steps, it would be highly appreciated.
Basically I have a stock TF201 with stock jelly bean 4.1.1 that I would like to flash to Hairy Bean 2.2. If anyone can clarify the steps I would really appreciate it.
Click to expand...
Click to collapse
Flash TWRP 2.5.0.0 first in fastboot. Then run the upgrade zip in the TWRP you just flashed. Then you can install a 4.2 ROM
sahilcc7 said:
Flash TWRP 2.5.0.0 first in fastboot. Then run the upgrade zip in the TWRP you just flashed. Then you can install a 4.2 ROM
Click to expand...
Click to collapse
thanks for the help. So here are the final steps. I hope everything is correct:
1. go to asus website download the app to unlock bootloader
2. install TWRP 2.5.0.0 using fast boot
3. read post #1 on this thread http://forum.xda-developers.com/showthread.php?t=1674827
4. download Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip
5. download Hairybean 2.2.zip
6. follow the steps on post #1
I've done step 1 above and I now have an unlocked bootloader.
I am now currently downloading ADB Sdk is fastboot inside or do I need to look for fast boot somewhere ?
vanguy2009 said:
thanks for the help. So here are the final steps. I hope everything is correct:
1. go to asus website download the app to unlock bootloader
2. install TWRP 2.5.0.0 using fast boot
3. read post #1 on this thread http://forum.xda-developers.com/showthread.php?t=1674827
4. download Upgrade Hairybean 4.2.1 Bootloader & Recovery.zip
5. download Hairybean 2.2.zip
6. follow the steps on post #1
I've done step 1 above and I now have an unlocked bootloader.
I am now currently downloading ADB Sdk is fastboot inside or do I need to look for fast boot somewhere ?
Click to expand...
Click to collapse
Correct.
You need to find the platform-tools folder in the SDK you downloaded. Then hold shift and right click somewhere in the folder and click 'open command window here'.
Nice thread !
I also want to flash my TF201.
Is there any issue in these steps with having NVFLASH or not having NVFLASH???
kwajoep said:
Nice thread !
I also want to flash my TF201.
Is there any issue in these steps with having NVFLASH or not having NVFLASH???
Click to expand...
Click to collapse
If you are still on ICS (4.0) android then you can do the NVFlash step. This will allow you to save your tablet info so that you can use it later to unbrick it.
If you are like majority of people who did over the air (OTA) upgrade to Jelly Bean (4.1.1) then you cant do the NVFlash step anymore and you wont be able to go back to an ICS version and do the NVFlash step.
I have Jelly Bean 4.1.1 so I cant do the NVFlash backup, which is why I am asking so many questions so that I dont brick my TF prime. (I already bricked one, this is my second one)
Did this work?did you manage to successfully put a custom rom onto it? am looking to put the Cyanogen Nightly on mine. just dont want to brick it....
L33B0B said:
Did this work?did you manage to successfully put a custom rom onto it? am looking to put the Cyanogen Nightly on mine. just dont want to brick it....
Click to expand...
Click to collapse
I'm in the same boat. I bricked a tf201, sold it and purchased another on ebay. I don't want to brick another, but would really like an updated custom rom... I'm watching with interest..
Any update on this? Was it successful or did it brick?
Please help, I've been looking for hours, I cannot install a custom rom (mySENSEdx5) I have an unlocked bootloader and have been running a custom ICS rom. the problem is I cannot update my bootloader from ICS to 1.25.0002 , is there anyway to update just the hboot?
Thank you
HairyJoe said:
Please help, I've been looking for hours, I cannot install a custom rom (mySENSEdx5) I have an unlocked bootloader and have been running a custom ICS rom. the problem is I cannot update my bootloader from ICS to 1.25.0002 , is there anyway to update just the hboot?
Thank you
Click to expand...
Click to collapse
Yes there is. S-OFF your phone via rumrunner (just Google... you'll land at their site and follow the instructions there). Then have a look at this: http://forum.xda-developers.com/showpost.php?p=50190792&postcount=47
dansou901 said:
Yes there is. S-OFF your phone via rumrunner (just Google... you'll land at their site and follow the instructions there). Then have a look at this: http://forum.xda-developers.com/showpost.php?p=50190792&postcount=47
Click to expand...
Click to collapse
Several attempts to use rum runner but it just keeps on pouring (past 10 attempts)and no S-OFF , I have now managed to put TWRP V6.3.0 recovery on my phone and did a wipe and tried to install the JB rom that failed! now I have no OS and TWRP wont install my backup.. I'm well stuck ! Is it possible to unbrick the phone in this state?
HairyJoe said:
Several attempts to use rum runner but it just keeps on pouring (past 10 attempts)and no S-OFF , I have now managed to put TWRP V6.3.0 recovery on my phone and did a wipe and tried to install the JB rom that failed! now I have no OS and TWRP wont install my backup.. I'm well stuck ! Is it possible to unbrick the phone in this state?
Click to expand...
Click to collapse
First of all, u cant flash jb recovery on ics hboot, u need to flash ics recovery which is here - http://d-h.st/eCC .
And download any ics Rom & ics kernel & flash it.
- ( Ics Recovery for ics hboot)
- ( Ics Rom for ics hboot)
- ( Ics kernel for ics hboot)
Then after all that ,view all the instructions & prerequisites required for S-off & start it.
(Most important one is disable all lockscreens)
Hi guys. can someone give me a download link for the stock recovery file and the boot.img file? I need to install the RUU for my enrc2b. since i have installed many custom roms and current is android revolution HD i cant install RUU by any procedure. the RUU always gives me some errors. I also tried to get the ROM.zip file extracted from the RUU file but it does not work anymore since HTC blocked it or something. pleaseeee help.
Just up the thread.
frrobin said:
Hi guys. can someone give me a download link for the stock recovery file and the boot.img file? I need to install the RUU for my enrc2b. since i have installed many custom roms and current is android revolution HD i cant install RUU by any procedure. the RUU always gives me some errors. I also tried to get the ROM.zip file extracted from the RUU file but it does not work anymore since HTC blocked it or something. pleaseeee help.
Click to expand...
Click to collapse
I'm also in need of the files just like the other person mentioned.
Currenly my HTC One X+ is runnning CM11 nightly build and wanted to flash back to stock.
What version of HBOOT and RADIO do you see in the FASTBOOT menu?
This is the stock recovery with 2.18.401.3:
https://yadi.sk/d/pgAzfBwhT562e
This is the stock 2.18.401.2 rom with inside the stock kernel (boot.img) to flash via fastboot:
https://docs.google.com/file/d/0B7yPonjCRjRrdnNUeDRNXzZyLXM/edit?pli=1
I think that the bootloader must be re-locked for the RUU
I hope it works! I stay tuned for any feedback