Hi, I updated my Ace to samsung's 2.3.4, and then flashed with cyanoace and I have i cannot connect to my network, it says: Emergency calls only!!
Help me please!!
Are u using kpb firmware?
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
jorioux said:
Hi, I updated my Ace to samsung's 2.3.4, and then flashed with cyanoace and I have i cannot connect to my network, it says: Emergency calls only!!
Help me please!!
Click to expand...
Click to collapse
Do you know how to flash modem with ODIN ?
If yes , do that .
try the grif kang cm7..
working on any baseband..
im using dxkpd..
I flashed with CyanoAce, and since that time it always says me "Emergency Calls Only".
What is KPB, KPH, KPD, and so on ?? I updated to 2.3.4 before flashing with CyanoAce as written on the instructions of CyanoAce.
How do I flash modem with ODIN (i used it to update to 2.3.4 tho)? which .zip do I must use and which .ops ??? Where can I find those?
And do you think that if I flash with kang's rom, it will work ?
Dat means u cant even connect to d internet. So u get d error wen callin or it shows in d status bar?
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
How can I know which baseband I must use??
I'm with Telus in Canada.
Go to settings-> about phone & check d baseband version. It wil b lik S5830XXKPH.
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
I think is installed the S5830DDKQ5 firmware (stock rom) via Odin. Is this possible that I flashed with the wrong firmware (wrong baseband) ?? Maybe that's why I cant connect to GSM.
Where can I find the good stock rom for my Ace ??
Go to www.samfirmware.com for official firmware.
For cyanoace u need kpb firmware. U can install grif's cyanogenmod on ur current ddkq5 rom. It wil work.
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
But why are you saying I need KPB ?? why this specific baseband ?
jorioux said:
But why are you saying I need KPB ?? why this specific baseband ?
Click to expand...
Click to collapse
I think mayb bcoz its d most stable modem. Bt if u want cyanogen rom, den flash cyanogenmod by grif_07. It works on most firmwares.
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7
Overclocked @ 921Mhz
Dta2sd: enabled
8gb class 2 + 1gb ext4 partition
Do u see ur imei no in the settings???!
Sent from my GT-S5830 using Tapatalk
yes, why ?
jorioux said:
yes, why ?
Click to expand...
Click to collapse
To check whether u lost ur imei no if it is there then no problem just flash the correct rom using odin.......
Sent from my GT-S5830 using Tapatalk
Related
I use firmware Code.ROMv1
and [KERNEL]Gingerbread with EXT4 support and FS converter
Complete...Can work normally.
But.. I have checked IMEI. changed to "00000000..."
Earlier it was. it is "3548900..."
Please help
Phone: Samsung Galaxy Ace GT-S5830
Rom: CodeRom NexusAce
Recovery: ClockworkMod v.4.0.0.9
KERNEL: Gingerbread with EXT4 support and FS converter
Nothing can b done. Try by flashing stock rom. If it doesn't work, then take it to samsung care and say that wen u upgraded to the latest stock rom, u lost it. Remember u shud b on the stock rom wen u take it to Samsung care.
vikraam said:
Nothing can b done. Try by flashing stock rom. If it doesn't work, then take it to samsung care and say that wen u upgraded to the latest stock rom, u lost it. Remember u shud b on the stock rom wen u take it to Samsung care.
Click to expand...
Click to collapse
Thanks u......
skyliner2008 said:
I use firmware Code.ROMv1
and [KERNEL]Gingerbread with EXT4 support and FS converter
Complete...Can work normally.
But.. I have checked IMEI. changed to "00000000..."
Earlier it was. it is "3548900..."
Please help
Phone: Samsung Galaxy Ace GT-S5830
Rom: CodeRom NexusAce
Recovery: ClockworkMod v.4.0.0.9
KERNEL: Gingerbread with EXT4 support and FS converter
Click to expand...
Click to collapse
Stock Rom should restore your IMEI, i had same problem on my old i9000.
Good luck.
@mod, delete this post
skyliner2008 said:
I use firmware Code.ROMv1
and [KERNEL]Gingerbread with EXT4 support and FS converter
Complete...Can work normally.
But.. I have checked IMEI. changed to "00000000..."
Earlier it was. it is "3548900..."
Please help
Phone: Samsung Galaxy Ace GT-S5830
Rom: CodeRom NexusAce
Recovery: ClockworkMod v.4.0.0.9
KERNEL: Gingerbread with EXT4 support and FS converter
Click to expand...
Click to collapse
resolve your problem?
what is the stock rom????
astrolove69 said:
what is the stock rom????
Click to expand...
Click to collapse
An Official Rom / firmware by samsung, is it not?
astrolove69 said:
what is the stock rom????
Click to expand...
Click to collapse
Go to google.com & search.
Sent from Galaxy Ace GT-S5830 using TheMyth beta2 lite.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
astrolove69 said:
what is the stock rom????
Click to expand...
Click to collapse
stock rom is official rom provided by samsung
u can find them here
well if you lose it you are going to send it to warranty 'cause you didn't backup your rfs file
KPH is the latest version (2.3.4) which theoretically should be better than KPN (2.3.3), but i have found many ROMS's have KPN as their base & these ROM's are supposed to be the fastest & stable of all ROM's . I am using the latest 2.3.4 KPH Stock ROM provided by Samsung ; & so m confused to which ROM should i go for , those based on KPH or KPN. Please guys if anyone can help me much appreciated (even though i m sound dumb to some people !!)
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
chinoyray said:
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
Click to expand...
Click to collapse
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
nilzkul said:
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
Click to expand...
Click to collapse
flash a full package KPN
setya5785 said:
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
flash a full package KPN
Click to expand...
Click to collapse
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
nilzkul said:
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
Click to expand...
Click to collapse
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Lenks said:
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Click to expand...
Click to collapse
You need the Cooper_v1.0.ops and then enable one package. Afterwards select the zip in one package.
You can download everything here.
Note that you have to extract the first zip folder until there's only one zip left which is called S5830XWKPN_S5830XWKP6_S5830OXXKP7_HOME
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
The only new feature kph 2.3.4 has that is not present in kpn 2.3.3 is the video chat in gtalk.
Galaxy Ace users cant even use that feature because the phone does not have a front facing camera.
That is why a lot of ROMs are based on KPN. For the reason that most bugs have been fixed and Samsung has ironed it out already.
Sent from my GT-S5830 using xda premium
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
Use stock then.
Cheers
setya5785 said:
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
Click to expand...
Click to collapse
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
nilzkul said:
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
Click to expand...
Click to collapse
That's correct. Baseband of KPN is KP6
Cheers
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
use stock KPN. been using it for a long time. the custom ROMs are bringing back SOD.
Hey, but kpn will work correctly here on america? Do you know?
I'm using kph with latinoamerican modem, is something like that on kpn?
THanks
catapult1234 said:
That's correct. Baseband of KPN is KP6
Cheers
Click to expand...
Click to collapse
cheers
Everything went smooth
thnx mate
now i am running GR ACE 1.1.0 KPN
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
I have flashed fla.sh X2 on top of KPH (even though the author said it's KPN-based), and I have yet to encounter problems such as SoD's, FC's and such. I don't if I'm just lucky or it's something I did, but I can't seem to recreate the SoD problems (but I try, though).
Sent from my GT-S5830 using XDA App
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
JonnyBoy6 said:
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
Click to expand...
Click to collapse
Android 2.3.4 is on par with KPH, so it doesn't seem like you are outdated.
But if I were you, just to be safe, I'd still flash it with KPH or KPN if I wanted to use a custom ROM.
I'm sorry for asking, but which country are you from? (Can't see the flag under your avatar as I'm browsing through my phone).
Sent from my GT-S5830 using XDA App
Hi Guys, I had 2.3.4 firmware and did a CF root.. everything was fine, and yesterday i got a notification in Kies for Firwareupdate.. I thought it was for 2.3.7. The process completed successfully. But when i checked the phone info, it still shows 2.3.4 but the BUILD # and baseband version have changed ... bit sure if its correct PLease advise...
Details,,,
Firmware details before Update:
-------------------------------
PDA:UHKG7
PHONE:UHKG4
Build date: 27/07/2011
Android 2.3.4
After update:
---------------
PDA:UHKI2
PHONE:UHKI1
Android 2.3.4
thank,
merin
How on earth you thought it'd be 2.3.7 dude when 2.3.5 is the latest out there!
Flash CM if you want a touch of 2.3.7.
Sent from my GT-I9100 using Tapatalk
Oops... i saw tat in some forum tat 2.3.7was next... ok but why it dint update to 2.3.7 ?
Sent from my GT-I9100 using XDA App
merin_83 said:
Oops... i saw tat in some forum tat 2.3.7was next... ok but why it dint update to 2.3.7 ?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You were just told that 2.3.5 is the latest..think about it
Sorry.... typo error... my question was
.why dint it update to 2.3.5 ....
Sent from my GT-I9100 using XDA App
does it come with a carrier loaded ROM? If so i think you have to wait for them to release it, as they put their own bloatware on.
Ricey
If i get your question rt.. i got this as unlocked in amazon, no carrier linkage i guess.. is tat correct?....
Sent from my GT-I9100 using XDA App
if you go to this (http://forum.xda-developers.com/showthread.php?t=1075278) excellent thread by intratech, you will see that UHKI2 is the latest firmware for your region. if you want 2.3.5. you will have to change the firmware to one of the european or hong kong firmwares (go through the thread, there might be more). you would need to do this using Odin, so "manual" update.
if you want 2.3.7 then you would have to slap CM7 onto your phone, but in that case you would have to do without any samsung software.
Oh.. ... i dint know it automatically changes to region specific ones.. earlier i had europian i guess....if i go for CM it would be a xomplete flash rt?... if yes then i would wait for ICS.... thank u all for the help....
Sent from my GT-I9100 using XDA App
Update via Kies?
Hi.. I'm very new to this and just got an unlocked Crazy Johns GS2: GT-I9100T, version 2.3.3, PDA DU-KH1, Phone DU-KF4, CSC VAU-KG2, 11 Aug '11. Is it possible to just change the CSC (backup, press *#272*IMEI#, select a region code, install), so Kies sees my phone as unbranded and for a region (eg. UK or Hong Kong?), where Samsung has officially released version 2.3.5, so I can update via Kies?
merin_83 said:
Oh.. ... i dint know it automatically changes to region specific ones.. earlier i had europian i guess....if i go for CM it would be a xomplete flash rt?... if yes then i would wait for ICS.... thank u all for the help....
Click to expand...
Click to collapse
I would suggest you get your hands dirty now, because Samsung said ICS will get released on this phone next year January 2012, which is pretty long if you think about it, and you know you will keep checking back here and one day you will lose patience and install CM7 onto the phone.
Just install CM7 now onto the phone.
Yes it is a complete wipe ROM, just have ClockworkMod Recovery to Wipe Cache + Data + Dalvik, then install the CM7 ROM from the internal SD (by wiping Cache + Data + Dalvik, it does not delete anything on the 16GB internal partition). You do not flash using Odin, and everything is based on the phone after moving the ROM of CM7 from the computer to the phone.
Hi there
here is the information about my sgs2
Model number
GT-I9100
Android version
4.0.3
baseband version
I9100xxkp8
Kernal version
[email protected]#3
Build number
IML74K
I think it is a stock rom but i don't like it cuz face recognization doesn't work , i can't connect my device to pc as a mass storage , the bluetooth visibility is only 2 minuets and other problems , so i decided to go back to stock rom Gingerbread 2.3.5 , but when i knew about Triangle away apk i though about take this chance and use it to reset my counter to 0 cuz now am still on ICS and this apk doesn't work on GB but before that i want to ask u does it work on my current rom ?!!!
NOTE : my device is rooted with CWM
any advices can u give it to me about using this apk ?!!
Thanks a lot
developer's advice is not enough? http://forum.xda-developers.com/showthread.php?t=1494114
what is your binaray count now?
how did you flash ICS rom XXKP8( old unofficial leaked version)? if you have flashed from CWM, trangle away will not work, since you have old GB bootloader.
+1 on zacq8..........man theres a lot on t away and if u don kno how to use it then thth was a diff ? i gess .but yes on ics it works not on gb..
ZACQ8 said:
developer's advice is not enough? http://forum.xda-developers.com/showthread.php?t=1494114
what is your binaray count now?
how did you flash ICS rom XXKP8( old unofficial leaked version)? if you have flashed from CWM, trangle away will not work, since you have old GB bootloader.
Click to expand...
Click to collapse
Thanks Bro
My binary count now is 6
i install the rom by Odin as 4 files as i remeber ( PDA,CSC.PIT ) something like that i don't remember and i checked on Repartition then
i rooted it by CF root
what should i do ?
binary 6 ,ok install t away....and then open it ,and reset binary(press)
rocky23 said:
binary 6 ,ok install t away....and then open it ,and reset binary(press)
Click to expand...
Click to collapse
i install the rom by Odin as 4 files as i remeber ( PDA,CSC.PIT ) something like that i don't remember and i checked on Repartition then
i rooted it by CF root
but ZACQ8 said that if i've flashed from CWM T away will not work !
what do u think ?
Help me plzzz
Madridismo said:
Help me plzzz
Click to expand...
Click to collapse
by flashing ICS from ODIN, you have already ICS bootloader, and as already instructed above use Triangle away....
follow the instructions of dev too
To clear up any misconception, ICS boot loaders are NOT required for Triangle Away to work. You just need to be on ICS. Member oinkylicious documented using the app with Gingerbread boot loaders just fine.
Thanks for the information, i was awaiting for clearing this doubt...
That T-away works regardles of the BL
Yup, I get the nice kick in the........ To get this info corrected lol.
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
DorimanX Kernel, best kernel (I use it too)
jootanen said:
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
Click to expand...
Click to collapse
ShowerPower said:
DorimanX Kernel, best kernel (I use it too)
Click to expand...
Click to collapse
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
im trying dual-boot today. i will let u know if it work.
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
ShowerPower said:
im trying dual-boot today. i will let u know if it work.
Click to expand...
Click to collapse
Did it work?
Sun90 said:
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
Click to expand...
Click to collapse
It's not clear because it says it does work in one part, but in a different part says it doesn't.
I have a feeling it works and the thread hasn't been updated properly, but I just want to make sure.
Anyone try it then?
wrsg said:
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Click to expand...
Click to collapse
Try my rom
mohammad.afaneh said:
Try my rom
Click to expand...
Click to collapse
It would be easier to just use the kernel you're using, which seems to be DorimanX. I was just looking for confirmation that it does work with CM10.1.
So I guess you're saying it does?