I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
DorimanX Kernel, best kernel (I use it too)
jootanen said:
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
Click to expand...
Click to collapse
ShowerPower said:
DorimanX Kernel, best kernel (I use it too)
Click to expand...
Click to collapse
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
im trying dual-boot today. i will let u know if it work.
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
ShowerPower said:
im trying dual-boot today. i will let u know if it work.
Click to expand...
Click to collapse
Did it work?
Sun90 said:
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
Click to expand...
Click to collapse
It's not clear because it says it does work in one part, but in a different part says it doesn't.
I have a feeling it works and the thread hasn't been updated properly, but I just want to make sure.
Anyone try it then?
wrsg said:
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Click to expand...
Click to collapse
Try my rom
mohammad.afaneh said:
Try my rom
Click to expand...
Click to collapse
It would be easier to just use the kernel you're using, which seems to be DorimanX. I was just looking for confirmation that it does work with CM10.1.
So I guess you're saying it does?
Related
Just asking
scandiun said:
Just asking
Click to expand...
Click to collapse
yes
Sun90 said:
yes
Click to expand...
Click to collapse
And the download link?
scandiun said:
Just asking
Click to expand...
Click to collapse
It's fully compatible. Only dream kernel by skyfire team have successfully ported it to their kernel.
Visit here for more info and download: forum.xda-developers.com/showthread.php?t=1788021
Swyped from my Samsung Galaxy SII
In short: No. It must be integrated into a custom kernel for the SGS2 since there is no dedicated recovery partition.
Looks good
I'm interested too.
I'll love to see it included on kernels like Dorimanx, but for now nothing.
loginsvarios said:
I'm interested too.
I'll love to see it included on kernels like Dorimanx, but for now nothing.
Click to expand...
Click to collapse
Or in PhilZ.
Ficeto kernel has twrp. Stock kernel for alliance. Check for rom compatibility.
----------------------
alliance 7.1
siyah v6.0b5
nels1
i9100
PhilZ's recovery is compatible with both Clockworkmod and TWRP
http://forum.xda-developers.com/showthread.php?p=40130714
I respond to myself. Apolo kernel uses TWRP on its latest version.
scandiun said:
I respond to myself. Apolo kernel uses TWRP on its latest version.
Click to expand...
Click to collapse
And cwm but its not in Eng its in Spanish. Also twrp is in every eng Apollo release
sent from my I9100 Alliance v8
Also ficeto kernel is twrp. This is alliance stock kernel.
sent from my I9100 Alliance v8
Title says it all
(p.s. dream kernel
and which other kernels do support 2 roms and JB and ICS?)
jorricks said:
Title says it all
(p.s. dream kernel
and which other kernels do support 2 roms and JB and ICS?)
Click to expand...
Click to collapse
yes its very much possible, u can also have dual boot option with Siyah kernel v3.5.2 and above for JB and ICS
jorricks said:
Title says it all
(p.s. dream kernel
and which other kernels do support 2 roms and JB and ICS?)
Click to expand...
Click to collapse
In addition to what Sun90 said, Dorimanx and Dream kernels are both compatible with JB, and also support dualbooting too
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
But before flashing confirm all details regarding its issues...
Hey!
Which kernel supports swapping for SGSII 2.3.6?
bump
bump
dretax said:
Hey!
Which kernel supports swapping for SGSII 2.3.6?
Click to expand...
Click to collapse
if by "swapping" you mean dual-booting, then Siyah Kernel does the job well
Swapping
saywhatt said:
if by "swapping" you mean dual-booting, then Siyah Kernel does the job well
Click to expand...
Click to collapse
Hey!
No. Im telling about the Virtual Ram (SWAP). Which can be enabled, with android programs.
But siyah kernel 2.6.14 doesnt support virtualram
bump
bump
Not sure if i'm doing something wrong, essentially when i try to dual boot with siyah kernel 5.0.1 i just get black screen, if i boot my stock ICS it's fine, i've tried a few ROM's (all JB) and they all just black screen when trying to boot, turning off and back on and going into primary is fine - am i missing anything obvious?
yes you are missing the reading part about it in the siyah thread..
JB roms are not supported yet
http://forum.xda-developers.com/showthread.php?t=1658647
yeah
hooligan007 said:
yes you are missing the reading part about it in the siyah thread..
JB roms are not supported yet
http://forum.xda-developers.com/showthread.php?t=1658647
Click to expand...
Click to collapse
That post is from May of 2012, the features of 5.0.1 on the siyah site state ICS + JB Dual boot as working.....
RSprockett said:
That post is from May of 2012, the features of 5.0.1 on the siyah site state ICS + JB Dual boot as working.....
Click to expand...
Click to collapse
well if its the early JB 4.1 based rom u can Dual boot using siyah 5.0.1, if its newer than that (4.1.2>4.2.1>4.2.2) then siyah v5.0.1 will not support the same, and u will get black screen on boot
Sun90 said:
well if its the early JB 4.1 based rom u can Dual boot using siyah 5.0.1, if its newer than that (4.1.2>4.2.1>4.2.2) then siyah v5.0.1 will not support the same, and u will get black screen on boot
Click to expand...
Click to collapse
That may be the issue, Its CyanogenMod 10.1 i'm trying which i assume is based on 4.1.2 or earlier, out of curiosity is it just a dualboot scenario that is unsupported. I.E. if i flashed with CM10.1 just on its own with siyah 5.0.1 it would work?
RSprockett said:
That may be the issue, Its CyanogenMod 10.1 i'm trying which i assume is based on 4.1.2 or earlier, out of curiosity is it just a dualboot scenario that is unsupported. I.E. if i flashed with CM10.1 just on its own with siyah 5.0.1 it would work?
Click to expand...
Click to collapse
for cm10.1 u should use the latest siyah v6.0b5 since siyah v5.0.1 will not be able to boot CM10.1 as its based on android 4.2.1 for u
Sun90 said:
for cm10.1 u should use the latest siyah v6.0b5 since siyah v5.0.1 will not be able to boot CM10.1 as its based on android 4.2.1 for u
Click to expand...
Click to collapse
I will do that then , I will be more cautious as obviously i have ot wipe my existing ICS install to do that =/
Cheers for your hlep
RSprockett said:
I will do that then , I will be more cautious as obviously i have ot wipe my existing ICS install to do that =/
Cheers for your hlep
Click to expand...
Click to collapse
Do remember that CM10.1 isn't fully supported by Siyah v6.0b5 for now and u might face issues.
Better to install CM10.1 and stay with the stock Cm10.1 kernel that comes with it to get better results
Sun90 said:
Do remember that CM10.1 isn't fully supported by Siyah v6.0b5 for now and u might face issues.
Better to install CM10.1 and stay with the stock Cm10.1 kernel that comes with it to get better results
Click to expand...
Click to collapse
Apologies, Won't CM 10.1 just run on top of the siyah kernel? or by flashing to it will it replace the kernel with its own
I'm not ultimately loyal to a kernel, i just want to run jelly bean on my S2
Thanks
RSprockett said:
Apologies, Won't CM 10.1 just run on top of the siyah kernel? or by flashing to it will it replace the kernel with its own
I'm not ultimately loyal to a kernel, i just want to run jelly bean on my S2
Thanks
Click to expand...
Click to collapse
yes, if u flash CM10.1 Rom it will replace the siyah kernel with the stock Cm10.1 kernel that comes along with it
Sun90 said:
yes, if u flash CM10.1 Rom it will replace the siyah kernel with the stock Cm10.1 kernel that comes along with it
Click to expand...
Click to collapse
He's back already (googling this atm so will hopefully find solution), installed CM 10.1 and the blue circle just never stops going round, not 100% why thats happened
Try siyah v5 sync kernel...
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Try siyah v5 sync kernel...
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Working now , just wiped cache and davlik and data, tried again and its fine this time
Thanks for the advice guyzz - thanks all round x
RSprockett said:
Working now , just wiped cache and davlik and data, tried again and its fine this time
Thanks for the advice guyzz - thanks all round x
Click to expand...
Click to collapse
Good for u! :thumbup:
Please add [SOLVED] to the title of ur post so that it helps others with similar problems.
"To err is human, to forgive is divine"
Sent from my SGS II
As above - already did a factory reset and tried different combinations via Odin:
1. stock ICS 4.03 with stock kernel
2. CM10.1 with CM Kernel
3. CM10.1 with Siyah 6.0b5 Kernel - stuck @ black screen
4. CM10.1 with Dorimanx 9.43 kernel - stuck @ Dorimanx splash screen
all also cannot turn on wifi at all to scan for networks (slider greyed out on both stock/CM roms). other than hardware fault, what else can i do?
dylansmith said:
As above - already did a factory reset and tried different combinations via Odin:
1. stock ICS 4.03 with stock kernel
2. CM10.1 with CM Kernel
3. CM10.1 with Siyah 6.0b5 Kernel - stuck @ black screen
4. CM10.1 with Dorimanx 9.43 kernel - stuck @ Dorimanx splash screen
all also cannot turn on wifi at all to scan for networks (slider greyed out on both stock/CM roms). other than hardware fault, what else can i do?
Click to expand...
Click to collapse
Which version of dorimanx did you use?
Christiaan91 said:
Which version of dorimanx did you use?
Click to expand...
Click to collapse
as stated in the first post - 9.43 for JB CM - http://dorimanx.shine.sk/kernels-jb-new-mali-cm/Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar
dylansmith said:
as stated in the first post - 9.43 for JB CM - http://dorimanx.shine.sk/kernels-jb-new-mali-cm/Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar
Click to expand...
Click to collapse
Which Mali version has cm10.1?
Is it Android 4.1.2?
Sent from my GT-I9100 using Tapatalk
Christiaan91 said:
Which version of dorimanx did you use?
Click to expand...
Click to collapse
just wanted to be sure (and prevent from bricking my own s2) -
v8.43 is below this title ➟➟➟ JB MALI V2 + JB SAMMY Kernels List!
I'm currently on JB CM10.1 - wouldn't it be incompatible with my current ROM?
dylansmith said:
just wanted to be sure (and prevent from bricking my own s2) -
v8.43 is below this title ➟➟➟ JB MALI V2 + JB SAMMY Kernels List!
I'm currently on JB CM10.1 - wouldn't it be incompatible with my current ROM?
Click to expand...
Click to collapse
True, but it's strange that it doesn't boot. New questions above.
Sent from my GT-I9100 using Tapatalk
Hey OP to much flash of Rom/Kernel's for now
Check the thread link below, go through it OP carefully then act accordingly for flashing a rom on ur phone and see if it resolves ur 'Wifi' issue
http://forum.xda-developers.com/showthread.php?t=2100558
Sun90 said:
Hey OP to much flash of Rom/Kernel's for now
Check the thread link below, go through it OP carefully then act accordingly for flashing a rom on ur phone and see if it resolves ur 'Wifi' issue
http://forum.xda-developers.com/showthread.php?t=2100558
Click to expand...
Click to collapse
sorry tried.. and it didn't work.
any other solutions please?