Just asking
scandiun said:
Just asking
Click to expand...
Click to collapse
yes
Sun90 said:
yes
Click to expand...
Click to collapse
And the download link?
scandiun said:
Just asking
Click to expand...
Click to collapse
It's fully compatible. Only dream kernel by skyfire team have successfully ported it to their kernel.
Visit here for more info and download: forum.xda-developers.com/showthread.php?t=1788021
Swyped from my Samsung Galaxy SII
In short: No. It must be integrated into a custom kernel for the SGS2 since there is no dedicated recovery partition.
Looks good
I'm interested too.
I'll love to see it included on kernels like Dorimanx, but for now nothing.
loginsvarios said:
I'm interested too.
I'll love to see it included on kernels like Dorimanx, but for now nothing.
Click to expand...
Click to collapse
Or in PhilZ.
Ficeto kernel has twrp. Stock kernel for alliance. Check for rom compatibility.
----------------------
alliance 7.1
siyah v6.0b5
nels1
i9100
PhilZ's recovery is compatible with both Clockworkmod and TWRP
http://forum.xda-developers.com/showthread.php?p=40130714
I respond to myself. Apolo kernel uses TWRP on its latest version.
scandiun said:
I respond to myself. Apolo kernel uses TWRP on its latest version.
Click to expand...
Click to collapse
And cwm but its not in Eng its in Spanish. Also twrp is in every eng Apollo release
sent from my I9100 Alliance v8
Also ficeto kernel is twrp. This is alliance stock kernel.
sent from my I9100 Alliance v8
Related
Anybody know how to change siyah kernal on VK Rom. It keeps saying installation aborted in CWM recovery.
dadog2t7 said:
Anybody know how to change siyah kernal on VK Rom. It keeps saying installation aborted in CWM recovery.
Click to expand...
Click to collapse
Which version Siyah, and which version VK?
Perhaps you were trying to install an S3 version of Siyah? Or an ICS version of Siyah to a Gingerbread version of VK? Or a GB version of Siyah to an ICS version of VK?
Can't answer the question without knowing versions. (or filenames of what you downloaded)
ctomgee said:
Which version Siyah, and which version VK?
Perhaps you were trying to install an S3 version of Siyah? Or an ICS version of Siyah to a Gingerbread version of VK? Or a GB version of Siyah to an ICS version of VK?
Can't answer the question without knowing versions. (or filenames of what you downloaded)
Click to expand...
Click to collapse
Vk rom v5.1.2 -- siyah kernal v3.3.1. im tryin to replace it with speedmod kernal.
dadog2t7 said:
Vk rom v5.1.2 -- siyah kernal v3.3.. im tryin to replace it with speedmod kernal.
Click to expand...
Click to collapse
So you're on Siyah 3.3 now? Is it currently working with Siyah 3.3?
What version of Speedmod are you trying to now install?
382 rageisra
ctomgee said:
So you're on Siyah 3.3 now? Is it currently working with Siyah 3.3?
What version of Speedmod are you trying to now install?
Click to expand...
Click to collapse
Yes its working fine with siyah, im trying to put speedmod k3-20.
dadog2t7 said:
Yes its working fine with siyah, im trying to put speedmod k3-20.
Click to expand...
Click to collapse
This is going to sound like a dumb question, but did you by chance download the Odin file and try to install that in CWM, instead of downloading the CWM file?
ctomgee said:
This is going to sound like a dumb question, but did you by chance download the Odin file and try to install that in CWM, instead of downloading the CWM file?
Click to expand...
Click to collapse
Lol no i downloaded the CWM flashable zip. Do you know what the problem would be m8?
dadog2t7 said:
Lol no i downloaded the CWM flashable zip. Do you know what the problem would be m8?
Click to expand...
Click to collapse
Nope. That was my last guess. Sorry.
Well try to re download it from www.gokhanmoral.com and flash through cmw recovery. It might be a bad download. All I can think of.
Sent from my GT-I9100 using xda premium
aerial
Maybe Fix Permission could help.
Any way could you post all output log here? It will realy help to give you an answer I beleve.
kilometers4 said:
Well try to re download it from www.gokhanmoral.com and flash through cmw recovery. It might be a bad download. All I can think of.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
thx! this worked for me ^^ i had the exactly same problem... seems like it was really just a bad download :/
Altair681 said:
thx! this worked for me ^^ i had the exactly same problem... seems like it was really just a bad download :/
Click to expand...
Click to collapse
Glad you got it sorted out
Sent from my GT-I9100 using xda premium
i want a CMW Recovery on my SGS2 by flashing kernel with Odin , can anyone give me a kernel ?
use philz kernal, it is the only one that works with 4.1.2 roms at the moment.
Cosmic Blue said:
use philz kernal, it is the only one that works with 4.1.2 roms at the moment.
Click to expand...
Click to collapse
Flash Phillz kernel via stock recovery.It is safe through stock recovery.
http://forum.xda-developers.com/showthread.php?t=1877270
From Phillz kernel thread,3rd post...
Recovery (.zip) packages instructions - Will also root your phone * recommanded method *
They come in the form of -signed.zip files that can be flashed in stock recovery 3e: No Yellow Triangle
Download xxx-signed.zip kernel matching your ROM
Put the previously downloaded xxx-signed.zip file on your external sd card
Boot into stock recovery (volume up+home+power)
Select "apply update from external storage".
Now select the xxx-signed.zip file you copied in previous step
You are rooted + new PhilZ-cwm6 kernel with CWM6
Philz has LS6 Kernel?
Would you know which file (signed.zip) we should use? I don't see LS6 on PhilZ post yet.
Regards
---------- Post added at 11:22 AM ---------- Previous post was at 10:50 AM ----------
thunder45 said:
Would you know which file (signed.zip) we should use? I don't see LS6 on PhilZ post yet.
Regards
Click to expand...
Click to collapse
Oops! My ROM is actually XXLSJ. I believe LS6 is the modem only. Philz does have the right file.
Thanks
Cosmic Blue said:
use philz kernal, it is the only one that works with 4.1.2 roms at the moment.
Click to expand...
Click to collapse
What about Siyah?
Gokhan has made Siyah compatible with JB now too
Infact i rooted my JB using Siyah
You can get it here if you want siyah of course. (Download the TAR, NOT Zip... TAR)
Cheers.
EDIT: Okay i lied i little, i didn't have root when i said i did, but i do now! Eveything went awesome. Your choice if you wnat siyah or not
Hi guys,
I just flashed PhilZ-cwm6-XXLSJ-OXX-4.35-signed.zip from external SD card using Philz Touch 3+CWM 6.0.1.5.
Now, my recovery shows Philz Touch 4+CWM 6.0.2.8.
Looking good, BUT it looks like I lost root. SuperSU says it needs to update it`s binaries, but fails to. If if SU at android terminal, it segmentation faults. And no root application (like Titanium) are working anymore. Even "Got Root?" shows me I lost root.
Does anybody know where did I go wrong? My ROM is the leaked 4.1.2 (http://forum.xda-developers.com/showthread.php?t=1992476).
Regards
Flash siyah v6 instead.
Sent from the little guy
gastonw said:
Flash siyah v6 instead.
Sent from the little guy
Click to expand...
Click to collapse
Any recommendation (link) on how to move from CWM 6 to there?
Regards
thunder45 said:
Any recommendation (link) on how to move from CWM 6 to there?
Regards
Click to expand...
Click to collapse
search for siyah v6 at gokhanmoral.com and flash via odin.
gastonw said:
search for siyah v6 at gokhanmoral.com and flash via odin.
Click to expand...
Click to collapse
Thank you Gastonw. After a goo Kernel Wipe (http://forum.xda-developers.com/showpost.php?p=35923600) I did flash Syiah and the root problem is still there.
So there I go flashing a new ROM. I think I`ll go Chameleon v3.0.1 Samsung/AOKP hybrid. I might keep it with Jeboo for a while as well. Maybe I`ll try Syiah again later.
Hope it works this time.
You can also try supernexus, I heard a couple of good things about it too.
Sent from the little guy
gastonw said:
You can also try supernexus, I heard a couple of good things about it too.
Sent from the little guy
Click to expand...
Click to collapse
I got Chameleon flashed. It is impressive! Soooo fluid and beautiful. The Kanger tweaks of the ROM are very useful. And of course, my rooting issues are gone now. I`ll probably stick to it a for a while.
Thanks
Samsung Galaxy SII i9100 (16GB)
Chameleon v3.0.1
Base: XWLS8 (4.1.2)
Kernel: Jeboo v1.3
Enjoy
Sent from the little guy
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
DorimanX Kernel, best kernel (I use it too)
jootanen said:
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
Click to expand...
Click to collapse
ShowerPower said:
DorimanX Kernel, best kernel (I use it too)
Click to expand...
Click to collapse
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
im trying dual-boot today. i will let u know if it work.
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
ShowerPower said:
im trying dual-boot today. i will let u know if it work.
Click to expand...
Click to collapse
Did it work?
Sun90 said:
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
Click to expand...
Click to collapse
It's not clear because it says it does work in one part, but in a different part says it doesn't.
I have a feeling it works and the thread hasn't been updated properly, but I just want to make sure.
Anyone try it then?
wrsg said:
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Click to expand...
Click to collapse
Try my rom
mohammad.afaneh said:
Try my rom
Click to expand...
Click to collapse
It would be easier to just use the kernel you're using, which seems to be DorimanX. I was just looking for confirmation that it does work with CM10.1.
So I guess you're saying it does?
Install last cm10.1 with siyah or dorimanx will lose baseband? It there a way to fix it or working around it ?
changlung said:
Install last cm10.1 with siyah or dorimanx will lose baseband? It there a way to fix it or working around it ?
Click to expand...
Click to collapse
Did you already try with stock kernel or change kernel version?
changlung said:
Install last cm10.1 with siyah or dorimanx will lose baseband? It there a way to fix it or working around it ?
Click to expand...
Click to collapse
For the moment, these kernels don't work properly with CM10.1
But some users did manage to get baseband : they flashed a specific modem with the matching RIL. try XXLQ6 or JHLPC but result is not guaranteed.
Otherwise, just wait for compatible updated kernel from siyah or dorimanx.
paiit said:
For the moment, these kernels don't work properly with CM10.1
But some users did manage to get baseband : they flashed a specific modem with the matching RIL. try XXLQ6 or JHLPC but result is not guaranteed.
Otherwise, just wait for compatible updated kernel from siyah or dorimanx.
Click to expand...
Click to collapse
I guess I need wait the Dorimanx 7.50, the cm10.1 20130224 will boot into blank screen with siyah or dorimanx kernel.
Welcome everyone
I have a problem when entering the management of applications come message forceclose and out of the settings I do not know what the problem is and how to solve it please help me
1. use a normal font.
2. we have no information. What ROM? What Kernel?
Glebun said:
1. use a normal font.
2. we have no information. What ROM? What Kernel?
Click to expand...
Click to collapse
sorry
stock rom 4.1.2 XXELLB
kernel franco #20
mazen2007 said:
sorry
stock rom 4.1.2 XXELLB
kernel franco #20
Click to expand...
Click to collapse
If you are using the Kernel from this Thread:
http://forum.xda-developers.com/showthread.php?t=1708763
then I suggest you should use another one, like Perseus or Siyah. The Franco Kernel for I9300 is outdated and doesn`t contain the Sudden Death Fix because the developer stopped supporting the Kernel for the I9300.
Scarface1991 said:
If you are using the Kernel from this Thread:
http://forum.xda-developers.com/showthread.php?t=1708763
then I suggest you should use another one, like Perseus or Siyah. The Franco Kernel for I9300 is outdated and doesn`t contain the Sudden Death Fix because the developer stopped supporting the Kernel for the I9300.
Click to expand...
Click to collapse
thanx for suggest i am install Perseus-alpha36.3-i9300.tar and same problem
mazen2007 said:
thanx for suggest i am install Perseus-alpha36.3-i9300.tar and same problem
Click to expand...
Click to collapse
Then try to wipe Cache and if that doesn`t help, you can try a factory reset but I would backup all your apps + data, so that you can restore them afterwards. And if that doesn`t help just flash another ROM. There are plenty good ones to choose from here on XDA, that are based on the newest Samsung Firmware base.
BTW the XXELLB base is not the newest one.