Hey!
Which kernel supports swapping for SGSII 2.3.6?
bump
bump
dretax said:
Hey!
Which kernel supports swapping for SGSII 2.3.6?
Click to expand...
Click to collapse
if by "swapping" you mean dual-booting, then Siyah Kernel does the job well
Swapping
saywhatt said:
if by "swapping" you mean dual-booting, then Siyah Kernel does the job well
Click to expand...
Click to collapse
Hey!
No. Im telling about the Virtual Ram (SWAP). Which can be enabled, with android programs.
But siyah kernel 2.6.14 doesnt support virtualram
bump
bump
Related
Hi,
I know this is a very basic question. But, it would be great if someone can answere this for me. I see a change log on Siyah Kernel 4.0.1 that reads like this "No Cap_Erase, No hardbrick". Does this mean ICS 4.0.4 is safe to use if I have Siyah Kernel 4.0.1 or above ? I think after reading a lot of hardbrick cases on XDA .. What I understood was most of the cases were because of the kernel that is being used rather than the firmware ... am I right on this ?
Thanks.
Every version of Siyah above 3.5.2 are safe.
przemcio510 said:
Every version of Siyah above 3.5.2 are safe.
Click to expand...
Click to collapse
damn!!dont give wrong info lol..even 3.3.2 is safe..many roms dev use it and im using it too
Do let me know if i am wrong lol..will change it asap
aviral1990 said:
damn!!dont give wrong info lol..even 3.3.2 is safe..many roms dev use it and im using it too
Do let me know if i am wrong lol..will change it asap
Click to expand...
Click to collapse
I believe you are right. He only had one that was bad, but that was a long time ago. You just need to be aware of the version you download (only the s2 one) and if they are compatible with the version of android you're running (ICS/JB)
Sent from my Nexus 7 using xda premium
Hi guys,
This morning i flash a CF root kernel, to gain root access then flash another kernel to overclock. But when I flash an overclock kernel the phone just gets stuck on the start screen and I have to re flash CF root again. Anyone know how to fix this?
Galaxy S2
O2
Android Version 4.0.3
Baseband Version I9100XXLPR
Kernel Version CF-Root-SGS2_XW_O2U_LP3-v5.4-CWM5
Build Number IML74K.XWLP3
Adarzannh said:
Hi guys,
This morning i flash a CF root kernel, to gain root access then flash another kernel to overclock. But when I flash an overclock kernel the phone just gets stuck on the start screen and I have to re flash CF root again. Anyone know how to fix this?
Galaxy S2
O2
Android Version 4.0.3
Baseband Version I9100XXLPR
Kernel Version CF-Root-SGS2_XW_O2U_LP3-v5.4-CWM5
Build Number IML74K.XWLP3
Click to expand...
Click to collapse
What kernel was that, i mean the overclock kernel
Swyped from my Galaxy SII
Jokesy said:
What kernel was that, i mean the overclock kernel
Swyped from my Galaxy SII
Click to expand...
Click to collapse
It was the galaxysii_oc_v1 found here http://forum.xda-developers.com/showthread.php?t=1075061
Why don't you try Siyah Kernel?
Yes, it enables overclocking, but it's full of other features too!
Adarzannh said:
It was the galaxysii_oc_v1 found here http://forum.xda-developers.com/showthread.php?t=1075061
Click to expand...
Click to collapse
Download and flash Siyah kernel: www.gokhanmoral.com/
Swyped from my Galaxy SII
Jokesy said:
Download and flash Siyah kernel: www.gokhanmoral.com/
Swyped from my Galaxy SII
Click to expand...
Click to collapse
That worked a treat thank you very much
Hello guys !
I have a SGS2 and my problem is this; the bottom buttons ( the sensitive ones ) dont work.
Somebody knows what might be the problem. I tried Android 2.3.4 , 2.3.6, 4.0.3 so i dont think is a software problem.
dariuspavel said:
Hello guys !
I have a SGS2 and my problem is this; the bottom buttons ( the sensitive ones ) dont work.
Somebody knows what might be the problem. I tried Android 2.3.4 , 2.3.6, 4.0.3 so i dont think is a software problem.
Click to expand...
Click to collapse
try changing the kernel and see
if the problem still persists then Samasung SC is ur next destination
Sun90 said:
try changing the kernel and see
if the problem still persists then Samasung SC is ur next destination
Click to expand...
Click to collapse
And what SC means ?
dariuspavel said:
And what SC means ?
Click to expand...
Click to collapse
Lol SC- Service Center.
Sun90 said:
Lol SC- Service Center.
Click to expand...
Click to collapse
tried another kernel... now the phone doesnt starts (
dariuspavel said:
tried another kernel... now the phone doesnt starts (
Click to expand...
Click to collapse
What kernel did you try?
Swyped from my Samsung Galaxy SII
Jokesy said:
What kernel did you try?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
this one Kernel_I9100ZSLPF
Jokesy said:
What kernel did you try?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
hey @ jokesy check pm
Sun90 said:
hey @ jokesy check pm
Click to expand...
Click to collapse
could be a hardware problem ?
Jokesy said:
What kernel did you try?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
do you know a good kernel ?
Sun90 said:
hey @ jokesy check pm
Click to expand...
Click to collapse
Got it.
Swyped from my Samsung Galaxy SII
Use Siyah kernel...
On which firmware you currently are on?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Omaxe said:
Use Siyah kernel...
On which firmware you currently are on?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Click to expand...
Click to collapse
Android 4.0.4
Hi guys
Just wondering if someone tell/show me if it's possible to flash Siyah kernel to my sgs3 Gt I9300 running paranoid android v2.13?
I only just got an android phone so I'm a huge noob who's only ever had I phones lol
I downloaded Siyah 1.6a 9 l17 and tried flashing that from cwmr by installing zip from sd card which said was successful but when I go to about phone it doesn't show its been flashed? Any ideas what's wrong (apart from me being a noob!)
Bravo Kwintalio said:
Hi guys
Just wondering if someone tell/show me if it's possible to flash Siyah kernel to my sgs3 Gt I9300 running paranoid android v2.13?
I only just got an android phone so I'm a huge noob who's only ever had I phones lol
I downloaded Siyah 1.6a 9 l17 and tried flashing that from cwmr by installing zip from sd card which said was successful but when I go to about phone it doesn't show its been flashed? Any ideas what's wrong (apart from me being a noob!)
Click to expand...
Click to collapse
How do you know it has not flashed.. It is a hacked stock kernel so will not say siyah in the kernel name..
Check if you have stweaks.. If yes then it had worked.. Use it to tweak the kernel
Sent from the iPoop killer ==>>>
zoot1 said:
How do you know it has not flashed.. It is a hacked stock kernel so will not say siyah in the kernel name..
Check if you have stweaks.. If yes then it had worked.. Use it to tweak the kernel
Sent from the iPoop killer ==>>>
Click to expand...
Click to collapse
Lol I'm such a noob! Just going through my app drawer and there stweaks is maxing relaxing. <. <!
Thanks for the reply!
Bravo Kwintalio said:
Lol I'm such a noob! Just going through my app drawer and there stweaks is maxing relaxing. <. <!
Thanks for the reply!
Click to expand...
Click to collapse
Now how to use them lol?! Let me start searching the forum for that haha
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
DorimanX Kernel, best kernel (I use it too)
jootanen said:
Yes. Check out this thread
Sent from 2nd ROM using Tapatalk 2
Phone: Samsung Galaxy S II GT-i9100
Sd card: Samsung class 10 16gb
Modem: LS8
Kernel: Dorimanx 7.47
1st ROM: Omega 19.2
2nd ROM: PACman v19.9
Dual boot Samsung XWLS8 and CM10(.1) [ROM ADDED][Tutorials added]
Click to expand...
Click to collapse
ShowerPower said:
DorimanX Kernel, best kernel (I use it too)
Click to expand...
Click to collapse
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
im trying dual-boot today. i will let u know if it work.
wrsg said:
I'm slightly confused by the DorimanX page, it says the kernel does not support dual-boot, but further down the page it says it does support dual-boot???
Can anyone confirm actually using dual-boot with this kernel successfully?
Click to expand...
Click to collapse
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
ShowerPower said:
im trying dual-boot today. i will let u know if it work.
Click to expand...
Click to collapse
Did it work?
Sun90 said:
Dual boot with Dorimanx is currently not supporting any JB 4.1.2 rom's either Stock or Custom that r using the /Preload partition for now.
Since that partition is needed for installing SecondRom for Dual boot
Click to expand...
Click to collapse
It's not clear because it says it does work in one part, but in a different part says it doesn't.
I have a feeling it works and the thread hasn't been updated properly, but I just want to make sure.
Anyone try it then?
wrsg said:
I'm on XWLS8 (the Spain release), I want to dual-boot with CM10.1, is there any kernel that works with XWLS8 and supports dual-booting?
Click to expand...
Click to collapse
Try my rom
mohammad.afaneh said:
Try my rom
Click to expand...
Click to collapse
It would be easier to just use the kernel you're using, which seems to be DorimanX. I was just looking for confirmation that it does work with CM10.1.
So I guess you're saying it does?