Hi all, I'm Martin from Argentina, I write to ask and know if you can help me or guide me to find a solution.
I have a U20i that brought me outside.
When I received the phone had Android 1.6 and upgrade to 2.1.
I do not remember if the previous version had 3G, with almost no use.
My phone provider supports 850 and 1900 MHz bands.
In the configuration, network mode, I can see options:
- WCDMA
- GSM
- GSM / WCDMA (preferred)
When I search for available networks, I see only 2G networks.
Phone Details:
Mobile Network Type: EDGE
Firmware Version: 2.1-Update1
Kernel Version: 02/06/1929
Build Number: 2.1.1.A.0.6
Can you help me get a 3G signal?
PD: Sorry for my English
Thank you very much.
Greetings.
U20i does not support 3G on the 850/1900 bands. No one can help you get 3G signals with that phone.
Than you...
I confirm that I have an U20i
Hi there, my system is:
Radio: N_01.77.07P
Webtop: OSHWT_U1_6.66.0
Kernel: 2.6.32.9
Versão: OLYLA_U4_0.50.0 (Blur_Version_0.50.3.MB860.Vivo.en.BR)
Id like to install a new radio.zip on it, cause my cellphone is too hot, and the internet connection is very slow, on 3g and wifi. But I have some questions:
1. Im sure that my phone is not the at&t, I bought it here om Brazil from VIVO, so can I use the bell radio?
2. Is there a way to me backup my 77.07p radio?
Please help me with the 3 questions.
Thanks
http://forum.xda-developers.com/showthread.php?p=19191564
~ Sent from My Unlocked, Rooted, Gingerbreaded, and Pi-Crusted Atrix 4G ~
thanks thread is close
I'm trying to use a China Telecom SIM (a CDMA network/APN) in my Samsung Galaxy S 4G (designed for T-Mobile, GSM/WCDMA)
Is it possible?
Has a CDMA ROM for SGS4G (or other GSM/WCDMA phone) been developed? I think the conversion would take some crazy coding. Is this a surefire way to brick my phone?
SGH-T959V on Android 2.2.1
Baseband vr: T959VUVKD1
Kernel vr: 2.6.32.9
Buid No. FROYO.VUVKD1
All stock
Rooted, SIM unlocked
Hi, My name is Masaki, I'm from Peru, I have a problem with my Xperia X10a, my phone was operator locked (I buy it from my friend, he uses this phone with movistar operator but I have a line with another operator called claro.
My friend say he can unlock the operator lock, for this, he use a program called medusa box, after a few minutes he finally can unlock the phone, but, now, the phone only can connect to edge band, the 3G don't work anymore, somebody can help me?
Masaki
PS:
All work ok in the phone, I tried original rom (android 2.1), updated rom (2.3.3) custom rom... custom kernel, with no result...
when I choose "only WCDMA mode", I lost the singal (phone and data) and a error appear (no operator found), only work when I use "GSM only" or "prefered WCDMA to GSM" (but work in GSM/edge mode only)
the local operator (both) are X10a band compatible
Did you try relocking the phone ?
Maybe a bad unlock procedure.
Sent from my X10i using XDA
weird problem
can't lock again with that soft.
You can try this. I found that in some roms it is more easy to change than in others. Miui roms seem to have more settings to change than stock based roms.
1. Claro Puerto Rico Manual APN Settings for Android:
Go to Menu -> Settings -> Wireless & networks-> Mobile networks -> Access Point Names -> New APN and key the following
Name : Claro Internet
APN : internet.claropr.com / for mms/ mms.claropr.com
Proxy : 10.50.38.3
Port : 8080
Username : < Not Set >
Password : < Not Set >
Server : < Not Set >
MMSC : http://mmsg.claropr.com:1021/mmsc
MMS Proxy : 10.50.38.3
MMS Port : 8799
MCC : 330
MNC : 110
Authentication type : < Not Set >
APN Type : < Not Set >
2. Claro Puerto Rico Manual APN Settings for Android
Go to Settings-> General Settings-> Network->Turn ON Cellular Data
Select Cellular Network -> APN and key the following details
Cellular Data:
APN: internet.claropr.com
Username: Blank
Password: Blank
MMS:
APN: mms.claropr.com
Username: blank
Password: blank
MMSC: http://mmsg.claropr.com:1021/mmsc
MMS Proxy: 10.50.38.3:8799
MMS Message Size: default
MMS UA Prof URL: default
masakisan said:
Hi, My name is Masaki, I'm from Peru, I have a problem with my Xperia X10a, my phone was operator locked (I buy it from my friend, he uses this phone with movistar operator but I have a line with another operator called claro.
My friend say he can unlock the operator lock, for this, he use a program called medusa box, after a few minutes he finally can unlock the phone, but, now, the phone only can connect to edge band, the 3G don't work anymore, somebody can help me?
Masaki
PS:
All work ok in the phone, I tried original rom (android 2.1), updated rom (2.3.3) custom rom... custom kernel, with no result...
when I choose "only WCDMA mode", I lost the singal (phone and data) and a error appear (no operator found), only work when I use "GSM only" or "prefered WCDMA to GSM" (but work in GSM/edge mode only)
the local operator (both) are X10a band compatible
Click to expand...
Click to collapse
Since Claro doesn't use 2100 MHz band you will have Edge only. Or switch to carrier with 2100 band for 3G.
tal333
Phone: Sony Ericsson Xperia X10i @1.036GHz- White
Android version: 2.3.7
Kernel: 2.6.29-FXP
Radio: 2.1.71
Recovery: CWM- v5.0.2.8
Rom: FXP-CM7#112 CyanogenMod-7.2.0-RC0-es209ra-KANG
Theme: Honeycomb3D-3Dicons by BKMO
about claro
The claro operator in peru work in 850, and movidtar in 1900, i cant connect in booth cases
masakisan said:
The claro operator in peru work in 850, and movidtar in 1900, i cant connect in booth cases
Click to expand...
Click to collapse
Well, if 850 and 1900 are what is supported in your Country, and both 850 and 1900 are not available in the X10i, it probably would be best for you to sell the X10i and buy an X10a.
tal333
Phone: Sony Ericsson Xperia X10i @1.036GHz- White
Android version: 2.3.7
Kernel: 2.6.29-FXP
Radio: 2.1.71
Recovery: CWM- v5.0.2.8
Rom: FXP-CM7#112 CyanogenMod-7.2.0-RC0-es209ra-KANG
Theme: Honeycomb3D-3Dicons by BKMO
abiut phone
my phone is X10a, the phone work in 3G before the unlock (medusa box sim operator unlock) but after the unlock the wcdma mode don't work anymore
Masaki
service menu report...
today I checked the service menu, I found the follow info, maybe this can be useful to find an answer...
SIMLOCK
Network 5
Network subset 5
Service provider 5
Corporate 5
SIM 0
Configuration:
IMEI: 3594.......
Imei soft version 71
avaiable speech codec: HR FR EFR AMR_HR AMR_FR
Working band: GSM850 - GSM900 - GSM1800 - GSM1900 - UMTS_BC1 - UMTS_BC4 - UMTS_BC8
masakisan said:
my phone is X10a, the phone work in 3G before the unlock (medusa box sim operator unlock) but after the unlock the wcdma mode don't work anymore
Masaki
Click to expand...
Click to collapse
Since your OP stated it was an X10i, that would have been the problem with no hspa. I am not sure but perhaps restoring to original 2.3.3 and baseband following the link below exactly might get your hspa working. Good luck.
tal333
http://forum.xda-developers.com/showthread.php?t=1192152&highlight=doomlord+recovery
x10a
My phone is a x10a model from the start, I tried the original rom from local claro (android 1.6 and android 2.1) I tried the SE generic version update (android 2.3.3) custom roms + Kernel: doom kernel 1133 + Xperia S ported to X10 from chickensito (Android 2.3.7)
The problem still remain
I tried to set the apn manually... no result
Masaki
Tried x10i bands maybe your unlock changed your phone into a x10i what is your baseband I am just speculating
Sent from my X10i using XDA
about baseband
my actual spec are...
baseband: 2.1.71
kernel 2.6.29 modfxpdoomkernel
androis 2.3.7
X10i band are not compatible with Peru operator
xperia x10 no 3g
nobody can help me?
masakisan said:
nobody can help me?
Click to expand...
Click to collapse
people have helped you and you need to find a new carrier as the one you have dose not support the radio frequencies of the x10a try to trade sell it and buy a x10i or get a carrier that supports the radio of the phone you have.
x10a
My local carrier (both) work with Xperia X10a, X10i don't work here.
try if you can get a band on another carrier preferably does have the the
2100mhz band just to confirm that your radio is working
Sent from my X10i using XDA
Found a solution yet?? I have a similar problem with my X10a.
I'm with Telcel in México, simlocked (i got my cellphone from Telcel), but the radio signal is not working, tried with another sim card and got the same result...
carrier
there is only 2 carrier in my country, and don't work with 2100 freq
No, my problem is not solved. any ideas?
tried reflashing x10a baseband? any errors when forcing 3g mode? e.g can't enable radio etc.... ?
Sent from my X10i using XDA
Hi everybody,
i read several forums regarding the gsm noise problem during a phonecall in 2g (gsm mode) with the Xperia S.
For those devices, it doesn't matter if you change the carrier or the the Simcard itself, it is still the same effect.
1) I have unrooted german Xperia S, running the newest manufacturer version 4.0.4
Carrier is T-Mobile
2) My work partner has the same phone but with carrier branding (T-Mobile) , running newest manufacturer version 4.0.4
Carrier is T-Mobile
What i alread did:
- I put my sim card in the branded 2) phone and didn't had those gsm noises in 2g mode.
- I figured out that he has also a better Wifi receiption at the exact same position then my 1) phone
- I took a look at the baseband version and saw that he has a newer one than me with his branded phone ? (Attachment)
The search function didn't brought me further so i was forced to creat this thread in the Q&A area (hopefully the right one)
I want to upgrade my baseband version to the same mentioned version.
Guess I have to root it first etc.
Anyway, is there any database with baseband versions for the Xperia s incl. tutorial etc. ?
Thanks for helping in advance