I left it to the toshiba locked, when I was doing and I was wp7 flash with blue LED, the light went home and I turn off the computer, which the mobile will restart after a while and so far no signs of life, not by giving the power vibrating or LED lights, and prove your all keystrokes and nothing, no response, I guess I can throw it?
yup, or find anyone with riffbox in the near
Same probelm here!!
The LED isn't showing! I can't charge the phone too!!
What else can I do??
Sent from my HTC Desire S using xda premium
or buy a box riff and you spend the money it or throw the phone away, little else can we do for the
you remove the battery, then insert battery and press the camera to power and blue LED back light, plug the machine back to conect with pc and then use the tool of nokser to up the bootloader, so I was already living and TG01 again, hope you do the same
tuandinh said:
you remove the battery, then insert battery and press the camera to power and blue LED back light, plug the machine back to conect with pc and then use the tool of nokser to up the bootloader, so I was already living and TG01 again, hope you do the same
Click to expand...
Click to collapse
We can't.. even the led won't come on at all. It can't boot to bootloader mode.
Sent from my HTC Desire S using xda premium
i herd somewhere in another thread you can basically jumpstart a tg01 battery by cutting a usb cable or something. i wouldnt try it unless you know what you are doing tho
Hi,
I had the same problem but after waiting a few days, with battery out of phone, and retried holding camera and power button the blue light came back on. But I don't know where to go from there, tg downloader doesn't detect my phone?
Thanks
jonslayer0 said:
Hi,
I had the same problem but after waiting a few days, with battery out of phone, and retried holding camera and power button the blue light came back on. But I don't know where to go from there, tg downloader doesn't detect my phone?
Thanks
Click to expand...
Click to collapse
NOT WITH TG DOWNLOADER! YOU NEED THIS STEPS BEFORE:
to get the 6.5.x Bootloader:
go in bootloader mode Camera+Power (Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished you have the 6.5 bootloader! NOW charge your battery 5-6 hours full
Prepare a 6.5.x .TSW ROM as .BIN ROM
TSW TOOLS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Toshiba_TSW.zip - encoder/decoder for tsw files / bin files
tnx http://cotulla.pp.ru/Misc.html
- browse to your toshiba ROM .tsw, then select Toshiba TG01 and you get a toshiba ROMas .bin file- ready to flash with TG Downloader
use/install TG-Downloader + Toshiba drivers. bring with Camera+Power to Download mode use TG-Downloader to flash the 6.5 BIN ROM
the tools + files + tut you find here: toshiba tg01 WP7 ROM
mirolg said:
NOT WITH TG DOWNLOADER! YOU NEED THIS STEPS BEFORE:
to get the 6.5.x Bootloader:
go in bootloader mode Camera+Power (Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)
need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished you have the 6.5 bootloader! NOW charge your battery 5-6 hours full
Prepare a 6.5.x .TSW ROM as .BIN ROM
TSW TOOLS
Toshiba_TSW.zip - encoder/decoder for tsw files / bin files
tnx http://cotulla.pp.ru/Misc.html
- browse to your toshiba ROM .tsw, then select Toshiba TG01 and you get a toshiba ROMas .bin file- ready to flash with TG Downloader
use/install TG-Downloader + Toshiba drivers. bring with Camera+Power to Download mode use TG-Downloader to flash the 6.5 BIN ROM
the tools + files + tut you find here: toshiba tg01 WP7 ROM
Click to expand...
Click to collapse
I solved my problem in this thread:
http://forum.xda-developers.com/showthread.php?p=19266884#post19266884
Related
[UPE/BLBR/FFU]★(¯ `•.Update Bootloader WP ® 7 for Toshiba Tsunagi[Method#1].•´¯)★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Info System Windows Phone for Tsunagi:
- Windows Phone: 7.0
- Platform: Tsunagi
- BLDR Version: 7.27.1.0
- Modem: DFP-SDCAOWZM-221001-1
- Bootloader version: 7.27.1.0
!!!!!!Important!!!!!!!!!!!:
This is a #1 method upgrade new bootloader wp7 for tsunagi.
Everything you do at your own risk. I do not bear the losses, for any damage.
Download System Bootloader Windows Phone:
base_source_bootloader
Copyright (c) 2010-2011 UPE Production by Nokser
All Right Reserved.
How To Write Bootloader:
I hacked program Acer_Euu.exe for upgrade new bootloader in Tsunagi device.
In this moment, it's first method upgrade BLDR
Update bldr it's easy:
We extract files from package
Connect Phone in FTM mode
Run mod. program tsunagi_ffu.exe
Write new files, and waiting for end process
Now We have a new Bootloader
Go to Any thread WP7 for Tsunagi Device
Get Genral file flash.bin(os.nb), and update this, in this same method.
How to enter FTM mode?
Uninstall tg01 driver,Installation acer driver
Normal download mode or short pin ,,
generic hs-usb diagnostics driver,
How to enter normal download mode? Do i really need to do short pin method?
nikola92 said:
How to enter normal download mode? Do i really need to do short pin method?
Click to expand...
Click to collapse
If you not want PIN method, then you must write my old WM6.5.x version xxx.0321
In this ROM, you have bootloader if press camera button + power
Then when i flash your ROM all i have to do is just flash it with the flash.bin
nikola92 said:
Then when i flash your ROM all i have to do is just flash it with the flash.bin
Click to expand...
Click to collapse
You flash bootloader already in phone?
well i didnt flashed this bootloaders since i dont understand how??? i dont get it how to get to FTM mode? Do i need your rom first and then to flash this bootloader?
nikola92 said:
well i didnt flashed this bootloaders since i dont understand how??? i dont get it how to get to FTM mode? Do i need your rom first and then to flash this bootloader?
Click to expand...
Click to collapse
and in general do you think?
Firs you must flash bootloader, or maybe all in ona moment.
Google: FTM - Factory Test Mode
can't you post some pic tutorial on hot make this all done, on google i cant get a thing. What i need to do to get in FTM mode! God damn is that so hard to say..... Ur tutorials are so confusing :S
nikola92 said:
can't you post some pic tutorial on hot make this all done, on google i cant get a thing. What i need to do to get in FTM mode! God damn is that so hard to say..... Ur tutorials are so confusing :S
Click to expand...
Click to collapse
maybe you tell me, why anyone not show me any pic, or video... not give me help
Why qinwengui not have problem in this process?
and if you find in google (from may page - http://upe.productions.lesscro.com/...ur-windows-phone-7-in-toshiba-tsunagi-tg01/):
-> Factory Mode (turn off your phone, and press: up, and down volume + press power button, at one time), Must display a sign on the screen: Factory Mode, etc.
Click to expand...
Click to collapse
@qinwengui How u didi it please if u can post step by step images, i am holding volume + and volume - buttons and power button but can get the FTM on. Please help!
nikola92 said:
@qinwengui How u didi it please if u can post step by step images, i am holding volume + and volume - buttons and power button but can get the FTM on. Please help!
Click to expand...
Click to collapse
Why you not want run this bootloader from PIN's?
Cause i dont have damn wire anyway
nikola92 said:
Cause i dont have damn wire anyway
Click to expand...
Click to collapse
If you press all keys: volume up and down + power button in one moment, then what you see in screen?
nothing, toshiba logo and the phone boots to winmo
nikola92 said:
nothing, toshiba logo and the phone boots to winmo
Click to expand...
Click to collapse
You must see in srceen: Factory Mode, nothing else
If you can't enter FTM try to flash various winmo roms, it's RADIO(!!) depending, on 321 it works. Just try some roms and post which works for FTM.
no i don't see that. I will try and install ROM with 0321 radio and maybe then i will be ablle to go in FTM
Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
MarvX said:
Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
Click to expand...
Click to collapse
hey my friend
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
why press power button
plase do this step! by step!:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
Yes i did tray this couple of times but with no success , when i plugged charger the charging red light dont flash red but i tray it anyway with charger on and off aswell.
I did it with the power button cose i read that somewhere and im scared i did burn or so something in MB as i had power charger plugged in i then short the pin 1 and 3 and then press power button. this is probably very bad way to go. the mobile is not responding to anything i tray
My TG01 has the same problem. I tried many times to flash a new ROM by "2 Short-Pin unbrick method" but nothing. @mirolg if you have some other ideas we are glad to hear you and to try on our dead phones.
Hi guys.
I need some clear instructions, and software needed to install Windows 7 on my TG01. I do not know most of the stuff I see posted in threads, so I need something even a retard could do.
It already has WM 6.5 on it. And it works well. I need something with a great chance of not bricking it.
anyone help plz
N00b guide
There is certainly not an obvious way to flash a TG01, especially to WP7, so here is a rough guide it's not perfect but hopefully this works for you. Please read and download everything you need before beginning the process.
Step 1: Flash WP7 bootloader
1) Download and install TG Downloader and the USB drivers. Reboot PC.
2) Fully charge your device battery. (Buy a cheap universal battery charger from eBay if necessary.)
3) Switch off your device.
4) Place your TG01 into "Download mode" as follows...
Devices with 0321 ROMs: Hold down Camera + Power buttons on boot.
Otherwise: Remove back cover, battery and SIM card. Carefully remove black sticker where the SIM card was. Get a piece of copper wire and twirl it so that you can easily hold it and touch Pin 1 and Pin 3 at the same time (known as "shorting"), see below image. Replace battery, short the pins with the copper wire and press the Power button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After either of these your device should display a white LED on the front which means it is in Download mode. If not, switch off and try again. Also if using the PIN method, maybe try holding the Reset button on the back for 10 seconds straight after pressing the Power button.
5) Connect phone to PC. Start TG Downloader with admin rights (right-click shortcut or EXE and choose "Run as administrator".
6) TG Downloader will display an error, click "yes". Click change port to change to Toshiba DL port if necessary. Click "Download mode".
7) Download and extract wp7boot.bin, browse to it in TG Downloader and click "Start Download".
8) Do not disconnect your phone until the process completes, it shouldn't take longer than 5-10mins.
Step 2: Flash WP7 ROM
1) Download and extract these OS files. Install the Acer driver (32 or 64bit) and the ZTEiT Common Downloader.
2) Download a WP7 ROM. I recommend one of the latest 7.8 builds. Once the ROM is downloaded, extract, rename to flash.bin and place in the same directory as NPRG8650.hex and partition.mbn.
3) Fully charge your device battery.
4) Switch off your device.
5) Hold Camera + Power to boot into Download mode, device should display a blue LED.
6) Connect to PC. Start ZTEiT Common Downloader. Select Multi-Download.
7) Browse to folder with downloaded files. Click advanced and for each of the three files (flash.bin, NPRG8650.hex and partition.mbn) browse to them.
8) Click Start to begin flashing process. Do not disconnect device until complete. Could take 15-25mins.
Then your device should boot up into your new WP7 software. Please note camera does not function in any WP7 builds AFAIK and there may be bugs or other limitations.
If this guide works, please go thank these guys: qinwengui, mirolg, arag0n85 and kevinpwhite. Of course thank the ROM creator too :victory:
help please
I never got to put the mobile in download mode, load some files previously in sd?
Thanks, I need it
p.d: I could only sd dowloading but gives error sd
TG01 SOS Failed in Flash wm6.5 to wm 7.0
Hi
Could anyone please help/assist me with this problem i would be great full.
I have a toshiba TG01 phone with windows moblie 6.5
I'm trying to upgrade/flash to load windows mobile 7 (mi7ROM_4_tango_8773_final.zip)
and i am failling to do it..
when i get to short hot wireing the phone to force it to install the contents of the "PRG" folder it comes with a white screen saying filed to download.
what files should be in the "PRG" and what do they do/mean?
My email: [email protected]
Hey, I know it's pretty outdated but does anybody here happen to have the TG Downloader still?
If so, that'd be very helpful if you can re-upload it to somewhere...
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
I have the same problem
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Pecan6 said:
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
Click to expand...
Click to collapse
Onilink90 said:
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Click to expand...
Click to collapse
First read this :
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
*CLICK THIS AND IN NEW TAB IN ADDRESS BAR REPLACE "INSERT_YOUR_IMEI_HERE" FOR YOUR ORIGINAL IMEI (BEHIND THE BATTERY) THEN YOU WILL SEE LINK ON THE PAGE CLICK THAT AND YOU WILL DOWNLOAD DIRECT FROM LG SERVERS
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button or VOL+ or VOL+ and VOL-
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
EDIT 5a BROKEN SCREEN SPECIAL
since your screens don't display you will have to test all key combinations
you can recognise download mode by opening device manager on pc and checking if only the 2 marked drivers are installed *(NOTE THAT PORT NUMBER MAY VARY)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
Click to expand...
Click to collapse
2 Report back
My phone is now bricked because I tried to flash the stock ROM(4.4.2) to my phone(6.0.1). At the time, I didn't know that you must format the phone before I guess, "downgrading" it. After I searched on google that I should format it, I went to SP Flash Tool to format it, and the phone got formatted. Now, all I need to do is to flash the stock ROM right? So I did flash the stock ROM to my phone, made sure that VCOM drivers are installed, using the latest version of SP Flash Tool. BUT, when I connected the phone to my laptop(through USB), the laptop detected it, when I press the Download button on the SP Flash Tool it's just at 0%. I tried to use the Firmware upgrade but still, stuck at 0%. I tried it on another PC and still, no luck. What do I do??? PLEASE HELP. I have until afternoon to fix it on my own because I'll give it to the local mobile repair shop.
BTW, the phone is still charging as I'm writing this thread
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
shashank_4412 said:
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
Click to expand...
Click to collapse
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
AjTheKid said:
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
Click to expand...
Click to collapse
I fixed mine by connecting the test point
You must open your phone and connect ground (any wire to ground) and find the preloader testpoint
Mine was the second test point near the volume control and power button next to the sim or black cable under the orange plastic covering the connector
I dont have the picture but i can give you an example (not s860 but similar)
WARNING: FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
BE CAREFUL OR YOUR PHONE WILL BE DEAD!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(not actual photo)
Those are test points, find a wire (any electrical wire) screw it to the screw that's holding the motherboard (for ground) and try each one of the test point, be careful not to connect the wire to vcc,vcharge or any 4.xx pins (if you were checking using a multimeter)
Here's a video for disassembling the phone : https://www.youtube.com/watch?v=Ry37RjmnZRo
And here's for reference : http://forum.gsmhosting.com/vbb/f672/lenovo-a850-dead-boot-how-easy-jtag-1868940/index2.html
http://forum.gsmhosting.com/vbb/f958/a850-lenovo-dead-while-flashing-1888753/
After you find the test point, the phone will be detected by the computer as vcom or something, quickly install the mtk65xx driver (if you haven't install yet) and flash the stock rom using sp flash.
Best of luck.