[Q] Installing Modified Roms - Galaxy S II Q&A, Help & Troubleshooting

Hi,
Firstly I will mention I'm a noob. I hgavent installed a modified ROM before, I currently have the latest 2.3.5 KJ2 firmware which I flashed using ODIN.
I want to installed a modified ROM mainly to get a digitial battery display in percent on my notification bar. However it appears all these modified ROMS require flashing through your SD card. The problem is I dont have an SD card. Is there a way to do this through USB only (i.e. Odin)?
Also what ROM and kernel would best suit my simple needs?

Jamie1029 said:
Hi,
Firstly I will mention I'm a noob. I hgavent installed a modified ROM before, I currently have the latest 2.3.5 KJ2 firmware which I flashed using ODIN.
I want to installed a modified ROM mainly to get a digitial battery display in percent on my notification bar. However it appears all these modified ROMS require flashing through your SD card. The problem is I dont have an SD card. Is there a way to do this through USB only (i.e. Odin)?
Also what ROM and kernel would best suit my simple needs?
Click to expand...
Click to collapse
save the rom of your choosing on your phones usb storage...there you can flash it easily...so download rom and you will find it if you go in my files then search the folder download and it should be there ready for you in a zip file..
just follow the instructions at the main page of the rom thread that you want to flash and you should be fine..
first though if you are not already make sure you flash a cf root kernel so you get rooted and then go ahead and flash a rom....once you have cf on then you should have cwm were you can flash your rom through there...
http://forum.xda-developers.com/showthread.php?t=1103399
follow the guide in that link (im sure you have done but its late here so sorry) and then will see you have cwm and then flash your rom of your choosing

I'm rooted but I rooted the old way --> flashed an insecure kernel, downloaded this program called S2 root and rooted via USB, then flashed the original kernel back. It appears that by doing it this way, I don't have clockworkmod recovery..
Should I always flash using the way you said?
Ok.. so let me go through the process..
1) Get a CF root Kernel which will allow me to have cwm. Question: Does the kernel version always have to match the 'ROM' version? When I updated to KJ2 I see that under phone info the 'Baseband Version' reads I9100XXKI4. Does baseband mean ROM, i.e. I have KI4 ROM but KJ2 kernel?
2) Flash following instructions from the modified ROM. I can simply store the rom on my phones memory and flash from there. Do I have to do anything after this? e.g. wouldnt I have to flash another kernel from that modified ROM, and in doing so would I lose my root and cwm? How important it for ROMS to match kernels?
Also, when I install the CF root kernel I get the yellow triangle on boot right.. I read the method on your link to remove it but it seems complicated. What is he actually doing to remove the triangle? Is he flashing back the original kernel?

The method he mentioned is the easiest way to flash a custom kernel, without having the yellow triangle.
The kernel doesn't have to match the ROM version. A custom kernel, e.g. like hardcore's speedmod (can be found in the original android section) installs root and CWM automatically.
Flash the custom kernel with Odin. The yellow triangle should appear after that. But CWM should be available and you're rooted now.
Reflash the original Kernel with CWM to remove the yellow triangle.

But wouldn't reflashing the original kernel using cwm defeat the purpose of flashing the custom kernel? Also do I use 'flash an update' or :?'flash a kernel's what's the main difference?
Sent from my GT-I9100 using xda premium

Jamie1029 said:
But wouldn't reflashing the original kernel using cwm defeat the purpose of flashing the custom kernel? Also do I use 'flash an update' or :?'flash a kernel's what's the main difference?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Any stock kernel is flashed through ODIN after rooting to get rid of yellow triangle. Afterwards, to flash any kernel of your choice, use DarkyROM tool.
https://market.android.com/details?id=com.ficeto.darkyrom&hl=en
Just copy the kernel tar file in to your usb storage and you can flash the kernel within phone using darkyrom tool (no need of pc). Also this method won't give you back the yellow triangle again.
And to be safe, it's a wise idea to buy an USB jig to reset your binary counter.

Thanks for your help Droid. Interesting I noticed that I did not get the yellow triangle after flashing siyah kernel over cwm. Original kernel before that was the stock one modified as per crikelos instructions to get the speedmod.. is that normal?
Ohh I don't get the binary counter thing. Why do I need to reset it? And how and why can a USB jig do this? A link would help. Thanks!
Sent from my GT-I9100 using xda premium

Related

[Q] I'm afraid to flash a secure kernel, help me people?

I had soft bricked my phone yesterday. Thank god I recovered finally but I'm stuck with an insecure kernel. Devs, can you guide me what should I do next?
It starts like this:
1. Updated my phone's firmware to KF3 (official) yestreday.
2. Then, Installed an insecure kernel, "GT-I9100_XXKG1_insecure" from this thread:
[KERNEL] Insecure Kernels for use with rooting
3. Rooted my SGS2. Success. (used this tutorial)
4. Now flashed the leaked 2.3.4 firmware from this thread:
Updating to 2.3.4 firmware - if you don't want to root
5. Now I needed to root again since I had just updated my firmware. The boot screen still had that yellow sign so I supposed I'm still on an insecure kernel. So I opened S2 Root and tried to root it but it was stuck in the middle of the process so I cancelled it.
6. Then, I again opened Odin and flashed a secure secure kernel from that same thread.
But instead of using Odin 1.83 as it was mentioned, I used 1.85. I don't think this could do any harm. But Odin failed to flash that kernel and my phone was stuck in a boot loop.
The phone didn't go further the boot screen with a yellow sign at the bottom. I was able to enter the download mode but NOT the recovery mode. So wiping the phone was not an option.
Then I decided to flash that 2.3.4 firmware again and this ****ed up my phone. Odin failed to flash it and my boot screen was then replaced with that infamous screen saying that the FIrmware Upgrade encountered an issue etc.
I thought I've bricked my phone but was finally I was able to recover again by flashing that insecure kernel again.
I think I created a problem in step 5 and 6. But I'm afraid to go and flash a secure kernel again. People help me?
You first flashed the insecure KG1 kernel and then the KG1 (2.3.4) FW ROM?
Wrong order AFAIK, but nothing that could harm your phone.
Try it once more, all over again from step one (this is also how I installed and rooted 2.3.4 KG1 over my (CF rooted) KE2 before CF-Root for KG1 was released):
Go to downloadmode, fire up Odin, connect everything, put the "CODE_I9100XXKG1_CL349526_REV02_user_low_ship.tar" into PDA and the "GT-I9100-CSC-MULTI-OXAKG1.tar" into CSC.
doublecheck nothing else is selected (no repartition, not PIT and all that)
Hit "Start" and watch the show roll....
after the flash, the phone should reboot into recovery, do some stuff and reboot again into the OS - all userdata is wiped during this flash, so IMO no manual wipe via recovery required here
now flash an insecure kernel and apply root using SuperOneClick or similar tools, or perform the the few step required manually via adb (that's what I did) - or simply flash CF-Root for KG1 instead of a plain insecure kernel (I'd suggest CF)
if you want back to stock kernel now (if you have CF, why would you? ) flash the KG1 stock kernel via Odin
This procedure worked perfectely fine for me.
If Odin keep failing to flash in download mode, there might be some connection problem, maybe.
Try reinstalling the USB driver, connecting to a different USB port, not using a USB hub if you previously did....
@OP- Flash with CF's rooted kernel. It's a lot easy and hassle free. Why insecure kernel?
HellcatDroid said:
You first flashed the insecure KG1 kernel and then the KG1 (2.3.4) FW ROM?
Wrong order AFAIK, but nothing that could harm your phone.
Try it once more, all over again from step one (this is also how I installed and rooted 2.3.4 KG1 over my (CF rooted) KE2 before CF-Root for KG1 was released):
Go to downloadmode, fire up Odin, connect everything, put the "CODE_I9100XXKG1_CL349526_REV02_user_low_ship.tar" into PDA and the "GT-I9100-CSC-MULTI-OXAKG1.tar" into CSC.
doublecheck nothing else is selected (no repartition, not PIT and all that)
Hit "Start" and watch the show roll....
after the flash, the phone should reboot into recovery, do some stuff and reboot again into the OS - all userdata is wiped during this flash, so IMO no manual wipe via recovery required here
now flash an insecure kernel and apply root using SuperOneClick or similar tools, or perform the the few step required manually via adb (that's what I did) - or simply flash CF-Root for KG1 instead of a plain insecure kernel (I'd suggest CF)
if you want back to stock kernel now (if you have CF, why would you? ) flash the KG1 stock kernel via Odin
This procedure worked perfectely fine for me.
If Odin keep failing to flash in download mode, there might be some connection problem, maybe.
Try reinstalling the USB driver, connecting to a different USB port, not using a USB hub if you previously did....
Click to expand...
Click to collapse
Umm okay, I'm a beginner in rooting so I hope you don't mind if I ask you some help? Do I need to download the KF3 firmware again? I've reached my FUP and it'll take more than a day for me
Is it possible to go ahead somewhere right now? I just want to remove that insecure yellow triangle sign from the boot screen. Any secure kernel to do this job?
ithehappy said:
@OP- Flash with CF's rooted kernel. It's a lot easy and hassle free. Why insecure kernel?
Click to expand...
Click to collapse
@itthehappy I followed what was written in the tutorial. So now when I'm on an insecure kernel, how should I flash with cf?
Sent from world's fastest phone.
Saketme said:
Umm okay, I'm a beginner in rooting so I hope you don't mind if I ask you some help?
Click to expand...
Click to collapse
He, I'm myself only learning all this stuff as I go
Saketme said:
Do I need to download the KF3 firmware again? I've reached my FUP and it'll take more than a day for me
Click to expand...
Click to collapse
No, you don't have to redownload any FW if your fine with the one you currently have.
Saketme said:
Is it possible to go ahead somewhere right now? I just want to remove that insecure yellow triangle sign from the boot screen. Any secure kernel to do this job?
Click to expand...
Click to collapse
Sure. If your root is working already and you just wanna go back to stock (secure) kernel, you can find the stock kernels for most, if not all, firmwares here:
http://forum.xda-developers.com/showthread.php?t=1075278
Pick the right one, matching your firmware and flash with Odin - done
Saketme said:
how should I flash with cf?
Click to expand...
Click to collapse
CF would be best option IMO.
First flash the CF kernel - again watch out it perfectly matches your FW.
On first CF boot it'll install it's CWM app, after that flash the stock/secure kernel to get rid of the triangle.
You can then re-flash the CF kernel with the CWM app without the triangle comming back
HellcatDroid said:
Sure. If your root is working already and you just wanna go back to stock (secure) kernel, you can find the stock kernels for most, if not all, firmwares here:
http://forum.xda-developers.com/showthread.php?t=1075278
Pick the right one, matching your firmware and flash with Odin - done
Click to expand...
Click to collapse
I can't find KG1 in that list. Although there is KG1 listed under ZSKG2 but that's for "GT-I9100T".
Should I use the stock kernel given in this thread instead:
Android 2.3.4 for SGS2 LEAKED - Post your impressions
HellcatDroid said:
CF would be best option IMO.
First flash the CF kernel - again watch out it perfectly matches your FW.
On first CF boot it'll install it's CWM app, after that flash the stock/secure kernel to get rid of the triangle.
You can then re-flash the CF kernel with the CWM app without the triangle comming back
Click to expand...
Click to collapse
This sounds the best option. But one question, before flashing with CF kernel, should I flash with stock kernel or flash CF directly on top of my current insecure kernel?
Saketme said:
Should I use the stock kernel given in this thread instead:
Android 2.3.4 for SGS2 LEAKED - Post your impressions
Click to expand...
Click to collapse
Yep, that's the one for 2.3.4's KG1
Saketme said:
This sounds the best option. But one question, before flashing with CF kernel, should I flash with stock kernel or flash CF directly on top of my current insecure kernel?
Click to expand...
Click to collapse
Should be fine flashing directely over whatever kernel there is at the moment, as it get completely replaced anyways.
Just make sure its the KG1 CF and no Kies crap running in the back while running Odin (use Taskmanager to kill them all).
HellcatDroid said:
Should be fine flashing directely over whatever kernel there is at the moment, as it get completely replaced anyways.
Just make sure its the KG1 CF and no Kies crap running in the back while running Odin (use Taskmanager to kill them all).
Click to expand...
Click to collapse
I am going to try this option, thanks a lot dude. I'll post my reply soon.
EDIT: Woot. I succeeded doing it, thanks a lot!

KH2? CF Root Problems

I was going to root my S2 today as I have had it for a while and want to root and update my rom or install a custom rom. CF hasn't made an insecure kernal for KH2. A few users had the same problem and used KH3 as stated by CF but some ended up running into difficult problems and some had no problem.
Should I use KH3 to root or should I use another method. I only want to root gingerbread so I can back up app data. I might then factory reset and update the stock rom or flash CM10 and then restore the app data.
Try using siyah kernel, same process...flash via Odin but with siyah there is a .zip and a .tar make sure you choose tar
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
bhavik_sheth said:
I was going to root my S2 today as I have had it for a while and want to root and update my rom or install a custom rom. CF hasn't made an insecure kernal for KH2. A few users had the same problem and used KH3 as stated by CF but some ended up running into difficult problems and some had no problem.
Should I use KH3 to root or should I use another method. I only want to root gingerbread so I can back up app data. I might then factory reset and update the stock rom or flash CM10 and then restore the app data.
Click to expand...
Click to collapse
Firstly, CF-Root doesn't use insecure kernels, it uses modified kernels, but thats OK. Here is a link to a one click root solution made by a reputable developer: http://forum.xda-developers.com/showthread.php?t=1125414
Scroll down the first post and you shall find the instructions. I believe the second post has a link to all the insecure kernels, including KH2 (I checked), and if you scroll down that link a little more, you shall find your original KH2 kernel to flash back to stop the yellow triangle showing at boot, but if you are immediately flashing a custom ROM, that is fine.
This method however will not grant you ClockWorkMod so you can flash a kernel such as Siyah Kernel, make sure to download the GB kernel, not the latest ICS kernel! Here is a link to the GB kernel: http://www.gokhanmoral.com/gm/2012/03/19/siyahkernel-v2-6-14/
Flash this using Odin. Put the .tar file in the PDA section on Odin once you have put your phone in download mode, killed off any Kies processes on your computer, and click start. This will add a new custom kernel to your phone, granting you ClockWorkMod Recovery, allowing you to flash a custom ROM.
Before progressing any further, back up your phone by booting into CWM (home button + power button + volume up button).
Also, download EFS Pro: http://forum.xda-developers.com/showthread.php?t=1308546 This tool backs up your EFS folder which contains your IMEI which can be damaged easily when flashing custom ROM's and you don't want to do that!
themadba said:
Firstly, CF-Root doesn't use insecure kernels, it uses modified kernels, but thats OK. Here is a link to a one click root solution made by a reputable developer: http://forum.xda-developers.com/showthread.php?t=1125414
Scroll down the first post and you shall find the instructions. I believe the second post has a link to all the insecure kernels, including KH2 (I checked), and if you scroll down that link a little more, you shall find your original KH2 kernel to flash back to stop the yellow triangle showing at boot, but if you are immediately flashing a custom ROM, that is fine.
This method however will not grant you ClockWorkMod so you can flash a kernel such as Siyah Kernel, make sure to download the GB kernel, not the latest ICS kernel! Here is a link to the GB kernel: http://www.gokhanmoral.com/gm/2012/03/19/siyahkernel-v2-6-14/
Flash this using Odin. Put the .tar file in the PDA section on Odin once you have put your phone in download mode, killed off any Kies processes on your computer, and click start. This will add a new custom kernel to your phone, granting you ClockWorkMod Recovery, allowing you to flash a custom ROM.
Before progressing any further, back up your phone by booting into CWM (home button + power button + volume up button).
Also, download EFS Pro: http://forum.xda-developers.com/showthread.php?t=1308546 This tool backs up your EFS folder which contains your IMEI which can be damaged easily when flashing custom ROM's and you don't want to do that!
Click to expand...
Click to collapse
What if I want to just update my S2 to the latest stock rom and not have a custom rom. Do I have to flash back to the original kernel to be able to update the stock rom? Once I update to the latest stock rom, will my phone still be rooted or will I have to root it again?
You would have to root it again. But Chainfire should have all the modified kernels for 4.0.3 ready for your use anyway.
Sent from my GT-I9100 using xda app-developers app
So after I flash the insecure kernel to root my phone (gingerbread), shall I flash back to the original kernel?
Sent from my GT-I9100 using xda app-developers app
Yeah it stops the yellow warning triangle being displayed at boot. Your custom flash counter will increase but it can easily be reset by buying a USB jig off eBay.
Sent from my GT-I9100 using xda app-developers app
So I should flash back to original kernel and then update to ics and then root again?
Sent from my GT-I9100 using xda app-developers app
Or just flash Siyah kernel via Odin and then flash a custom ROM which should automatically root your phone. If not, just find a CF-Root kernel for your firmware and all shall be good.
Sent from my GT-I9100 using xda app-developers app
There isn't a CF-Root Kernel for me which is why I created this thread to ask for the second best method to rooting a gingerbread S2 or if I should use KH3 CF-Root Kernel to root. I'm only rooting so I can back up app data using titanium. This is my first time rooting and flashing and I was going to root using CF-Root until I couldn't find a modified kernel for me.
Sent from my GT-I9100 using xda app-developers app
I told you how to in my first post, what are you on about! You haven't thanked anyone for any help, so I'm finished helping you. God sake.
Sent from my GT-I9100 using xda app-developers app

[Q] Safest way to avoid superbrick bug?

Galaxy S2 i9100.
Bad chip.
Bad Firmware: Stock 4.0.4 with (Stock) Kernel XWLPT.
Rooted with S2Root+Using SuperSU.
Searched forums, only similar thread is for Galaxy Tab. I'm assuming it's not relevant enough for me to follow it directly.
If possible, explain it like I'm 5:
What is the safest way to install a custom ROM? (Ideally, I want to install CM9 and later CM10 when it is more stable). I've seen people saying to flash Siyah kernel first, then do whatever afterwards. How can I do this? Almost a complete noob here, what buttons do I press in Odin and what procedure do I follow to flash a safe kernel then a custom ROM.
NB: USB is a little buggy, on-device flashing preferred for that reason.
Redclient said:
Galaxy S2 i9100.
Bad chip.
Bad Firmware: Stock 4.0.4 with (Stock) Kernel XWLPT.
Rooted with S2Root+Using SuperSU.
Searched forums, only similar thread is for Galaxy Tab. I'm assuming it's not relevant enough for me to follow it directly.
If possible, explain it like I'm 5:
What is the safest way to install a custom ROM? (Ideally, I want to install CM9 and later CM10 when it is more stable). I've seen people saying to flash Siyah kernel first, then do whatever afterwards. How can I do this? Almost a complete noob here, what buttons do I press in Odin and what procedure do I follow to flash a safe kernel then a custom ROM.
NB: USB is a little buggy, on-device flashing preferred for that reason.
Click to expand...
Click to collapse
Yes,, you need to flash a custom kernel.
1. First post your full ROM details
2. Can you confirm that you have ROOT access?
3. If your USB is buggy, you still flash Siyah kernel using mobile Odin, or the temporary CWM recovery. Root access is needed.
Thanks for the really fast reply.
Jokesy said:
Yes,, you need to flash a custom kernel.
1. First post your full ROM details
2. Can you confirm that you have ROOT access?
3. If your USB is buggy, you still flash Siyah kernel using mobile Odin, or the temporary CWM recovery. Root access is needed.
Click to expand...
Click to collapse
1. Stock 4.0.4 from samsung; Kernel version 3.0.15-I9100XWLPT-CL941023
2. 100% have root access. Running Droidwall (which is working) among other things
3. I'm unsure if it's the phone, USB port or drivers which are buggy.
Is it possible to get a definitive procedure to flashing Siyah with mobile Odin? (presuming it's safe to do so). After that, is it safe to just flash the full CM9 ROM with CWM?
The safest way to avoid the emmc bug is to flash a custom kernel. Like siyah or dorimanx. If you have root access, and CWM, you can install one of them. Do you have CWM? well then follow these steps.
-Download a custom kernel. Eg the .ZIP file of the latest version of siyah kernel for S2 from gokhanmoral's site.
-Store it in your internal SD card on your phone.
-Boot into recovery. ( Vol-up + Home + Power button )
-Go to: install zip from SD -> install zip from internal SD
-select the kernel's zip file
-select 'yes'
Let the phone reboot once your done. You should have a custom kernel and no chance of the emmc bug bricking your phone.
The reason I suggest using CWM rather than Odin, is incase you have a faulty usb port, that might pose a problem while installing via Odin.
Hope this helps.
HAXTREME said:
The safest way to avoid the emmc bug is to flash a custom kernel. Like siyah or dorimanx. If you have root access, and CWM, you can install one of them. Do you have CWM? well then follow these steps.[...]
Click to expand...
Click to collapse
I have root access but no CWM. When I originally rooted the phone the sole reason was for droidwall.
Is it safe to install CWM and flash a custom kernel as long as I don't do any data wipes?
Can I install a custom kernel and have the phone as is (without noticeable differences) until I flash a custom ROM?
What happens to SuperSU and it's settings when I flash a custom kernel (and will I still have root access)?
Finally, if anything screws up what is the recovery procedure? I don't have a copy of this kernel/firmware as I installed it as an OTA update.
Redclient said:
I have root access but no CWM. When I originally rooted the phone the sole reason was for droidwall.
Click to expand...
Click to collapse
you can download cwm or temporary CWM. Just have a look around for the links.
Redclient said:
Is it safe to install CWM and flash a custom kernel as long as I don't do any data wipes?
Click to expand...
Click to collapse
yeah it is. Even wiping data won't cause problems. Siyah isn't affected by the emmc bug.
Redclient said:
Can I install a custom kernel and have the phone as is (without noticeable differences) until I flash a custom ROM?
Click to expand...
Click to collapse
yea your phone will still look the same. A custom kernel doesn't change your ROM or data.
Redclient said:
What happens to SuperSU and it's settings when I flash a custom kernel (and will I still have root access)?
Click to expand...
Click to collapse
yes, you'll still have root.
Redclient said:
I
Finally, if anything screws up what is the recovery procedure? I don't have a copy of this kernel/firmware as I installed it as an OTA update.
Click to expand...
Click to collapse
You can make a nandroid backup with cwm. That will create an image of the current state of your phone to restore incase necessary. Just make sure u have a custom kernel and follow steps mentioned in the guides on this site and you shouldn't need to worry
Sent from my GT-I9100 using xda app-developers app
Thanks for all the help so far.
I've installed Mobile Odin (v3.35)
I've installed FlashKernel (v2), there was a v1 higher up the page but I'm going to assume that v2 has some bug fixes or other updates (please correct me if I should be using FlashKernel-I9100-v1 rather than v2.
Now, I'm not sure where to go: Should I install CWM or flash straight to Siyah kernel. CWM seems safer since I can do a backup and hopefully have some access if anything goes wrong.
How do I flash CWM with Mobile Odin? Which flash (mode? partition? not sure about terminology here) do I choose (Kernel, ..., etc) and probably importantly: which version of CWM should I be using? I've seen many threads talking about CWM4/5/6. Are they simply updated versions? designed for different kernels/android versions? Are there any specific versions which try to mitigate the superbrick bug?
Redclient said:
Thanks for all the help so far.
I've installed Mobile Odin (v3.35)
I've installed FlashKernel (v2), there was a v1 higher up the page but I'm going to assume that v2 has some bug fixes or other updates (please correct me if I should be using FlashKernel-I9100-v1 rather than v2.
Now, I'm not sure where to go: Should I install CWM or flash straight to Siyah kernel. CWM seems safer since I can do a backup and hopefully have some access if anything goes wrong.
How do I flash CWM with Mobile Odin? Which flash (mode? partition? not sure about terminology here) do I choose (Kernel, ..., etc) and probably importantly: which version of CWM should I be using? I've seen many threads talking about CWM4/5/6. Are they simply updated versions? designed for different kernels/android versions? Are there any specific versions which try to mitigate the superbrick bug?
Click to expand...
Click to collapse
Flash Siyah kernel straight using mobile Odin. It comes with a permanent CWM recovery too.
Todays almost all kenels are safe
so resure yourself
And be careful, when you flash rom in recoverymod
if. battery is off when flash rom, your device have hard brick
so you must have change your main board
I'm korean.. so my english speak is not so good.
Sent from my GT-I9100 using xda premium
Siyah kernel flashed and working perfectly. Didn't realise how instant it would be. Thanks again to everyone, this community is friendly and helpful.
I'm just wondering as I'm in the same boat as the OP was once in.
When it comes to choosing the Kernel does it matter if its JB based or ICS because I'm on the stock ICS rom.
wmichael10 said:
I'm just wondering as I'm in the same boat as the OP was once in.
When it comes to choosing the Kernel does it matter if its JB based or ICS because I'm on the stock ICS rom.
Click to expand...
Click to collapse
You don't have root access, right? Flash a custom kernel with Odin (like Siyah), but make sure it's compatible with your firmware. So if you're flashing Siyah, flash the version (v4 and/or v5 is what I thought) that's meant for ICS, otherwise your phone won't work.
Sent from the Matrix
Actually I used another method that allowed me to gain root access, but I'm on stock kernel and rom. I kind of feel safer when flashing a kernel and rom from recovery.
So say I use Siyah ICS for my Stock ICS rom, If I wanted to flash a JB rom like the one leaked from samsung would I need to also flash the Siyah kernel for JB too?
I have I9100T as well and 4.0.4 on it, what do I do? Will Siyah work for me?

[Q] Need help with rooting [official ICS 4.0.3][UCLE5]

Hello guys, So I'm fairly new to rooting (first android/smartphone/ but good experience with PCs) and was wondering if anyone could help me out. I'm using the ICS 4.0.3 build from kies, with the UCLE5, and build number IML74k.CLE5.
*from reading the stickies I've learned to NOT use ROM manager, galaxys2root.com, and to not use the STOCK ICS method as it has a brickbug ( the ones on forum)
Last night I tried rooting my phone by using Doomlord's guide but it didn't work ( I had unknown sources, and USB debugging on*but my phone was on and not on download mode or anything* )
Then I tried SuperOneClick root and it was just stuck on one of the steps, and the only way to stop it was to end task the program and ADP...any tips on what I'm doing wrong? Sorry for being a nub lol
*please move to Q and Q accidently posted in general section
Just use Odin to flash any ics kernel u want.
so I guess Ill try to flash using step 3. on http://forum.xda-developers.com/showthread.php?t=1285894 using ODIN3, then install a kernel ( i want to use 3.3d Siyah ) and then flash a custom ROM (like semi_v17) *the guide from here http://forum.xda-developers.com/showthread.php?t=1650948 correct?
I also want to add that after i Root using 2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows) that method, I boot into 3E recovery and perform data/factory wipe, wipe cache, dalvik and reset extweaks profiles...then install semi_v17 ROM while in recovery mode and done? Just making sure before I do anything with my phone
I know that relying on the sticky posts leaves some confusion because of Gingerbread and ICS versions. The Entropy512 stock plus root is a Gingerbread firmware with stock kernel and root. If you go that route, you then need to install a Gingerbread custom kernel, and then you can flash Semi from ClockworkMod Recovery if that is what you want.
In my opinion, since you are already on UCLE5 stock, the best route would be to flash the UCLE5 stock plus root package that you can download from the development section, and then install a custom ICS kernel. I know you were trying to avoid the Emmc Superbrick Bug, but since you have stock UCLE5 with the stock kernel on the phone now, you already (supposedly) have the Emmc Superbrick Bug present in the stock kernel. All the instructions needed to install a custom kernel are contained in the OP of the UCLE5 stock plus root thread.
If you have additional questions, just ask.
creepyncrawly said:
I know that relying on the sticky posts leaves some confusion because of Gingerbread and ICS versions. The Entropy512 stock plus root is a Gingerbread firmware with stock kernel and root. If you go that route, you then need to install a Gingerbread custom kernel, and then you can flash Semi from ClockworkMod Recovery if that is what you want.
In my opinion, since you are already on UCLE5 stock, the best route would be to flash the UCLE5 stock plus root package that you can download from the development section, and then install a custom ICS kernel. I know you were trying to avoid the Emmc Superbrick Bug, but since you have stock UCLE5 with the stock kernel on the phone now, you already (supposedly) have the Emmc Superbrick Bug present in the stock kernel. All the instructions needed to install a custom kernel are contained in the OP of the UCLE5 stock plus root thread.
If you have additional questions, just ask.
Click to expand...
Click to collapse
So I flash the build from this [Heimdall][Odin][Stock][Root]UCLE5 Stock ICS with Root..(no need to flash according to thread)
pick one of the the three kernels (prob going with AJ siyad) and install using Odin lite..then ROM? (like Semi v17?) it gets confusing at some parts cause on the Stock ICS + root section is says to wipe before flashing if coming from another base (im guessing since im on the UCLE5 base i dont need too)
AHomelessGuy said:
So I flash the build from this [Heimdall][Odin][Stock][Root]UCLE5 Stock ICS with Root..(no need to flash according to thread)
pick one of the the three kernels (prob going with AJ siyad) and install using Odin lite..then ROM? (like Semi v17?) it gets confusing at some parts cause on the Stock ICS + root section is says to wipe before flashing if coming from another base (im guessing since im on the UCLE5 base i dont need too)
Click to expand...
Click to collapse
Yeah just use mobild odin to flash a kernel and then boot into recovery then wipe then flash semi. I really wish we could update those stickies. They are pretty confusing
One last question...sorry for being a complete noob lmao after I get the kernel, I boot into CWM recovery wipe...and use mobile odin to flash semi?
AHomelessGuy said:
One last question...sorry for being a complete noob lmao after I get the kernel, I boot into CWM recovery wipe...and use mobile odin to flash semi?
Click to expand...
Click to collapse
once you have CWM, you use CWM to flash roms.....
Pirateghost said:
once you have CWM, you use CWM to flash roms.....
Click to expand...
Click to collapse
OK so i got the siyad kernel installed now with the phone stuff wiped (no apps installed yet, not even google account set up) so just put the ROM i want into SD card boot into recovery mode, and install zip from SD card?
AHomelessGuy said:
OK so i got the siyad kernel installed now with the phone stuff wiped (no apps installed yet, not even google account set up) so just put the ROM i want into SD card boot into recovery mode, and install zip from SD card?
Click to expand...
Click to collapse
yes
Thanks everyone everything seems to be working fine reinstalling my apps now and setting up my phone
**EDIT: I have noticed that my buttons on the bottom aren't as bright as they used to be..gonna go look for solutions/problems causing it

[Q] Hopefully fairly simple

I am about to install the international S2 JB ROM, and want root. The solution I have seen so far is the Siyah Kernel (6.0b4/5).
My question is this: If that kernal installs root, will I lose root if I change back to the official kernel that is inside the Firmware download (zImage)? What I might need is the CF-Root kernel, but I can't find it for JB (yet). Is it just a case of waiting for this?
I'm not familiar with ADB but am willing to teach myself, if this would help once I change to the siyah kernel (have looked at the quick root guides here: http://forum.xda-developers.com/showthread.php?t=1075278) but all the downloads are flagged by both Chrome and Avira if I do decide to continue past the chrome warning)
joshjoshajosh said:
I am about to install the international S2 JB ROM, and want root. The solution I have seen so far is the Siyah Kernel (6.0b4/5).
My question is this: If that kernal installs root, will I lose root if I change back to the official kernel that is inside the Firmware download (zImage)? What I might need is the CF-Root kernel, but I can't find it for JB (yet). Is it just a case of waiting for this?
I'm not familiar with ADB but am willing to teach myself, if this would help once I change to the siyah kernel (have looked at the quick root guides here: http://forum.xda-developers.com/showthread.php?t=1075278) but all the downloads are flagged by both Chrome and Avira if I do decide to continue past the chrome warning)
Click to expand...
Click to collapse
after installing siyah kernel v6.0b4/5 by flashing the tar file of the same thro ODIN ur phone will be rooted with the latest CWM recovery installed.
if u flash back the original kernel (zimage) again thro ODIN u will not loose ur root but it will be limited in its functionality
Sun90 said:
after installing siyah kernel v6.0b4/5 by flashing the tar file of the same thro ODIN ur phone will be rooted with the latest CWM recovery installed.
if u flash back the original kernel (zimage) again thro ODIN u will not loose ur root but it will be limited in its functionality
Click to expand...
Click to collapse
Thank you very much for your quick reply. I see now, the recovery seems to be part of/linked to the kernel. But I should still have superuser for use of titanium backup?
The only question I asked is: Do I keep root/busybox/cwm recovery
Lol of course you'll lose root and cwm, common sense. You will be flashing a new ROM package, new everything.
The only way to keep root (doesnt actually keeps, roots while flashing) is mobile odin.
I've found the answer, I do keep root, you were wrong.
Sent from my GT-I9100 using xda app-developers app
Sun90 said:
after installing siyah kernel v6.0b4/5 by flashing the tar file of the same thro ODIN ur phone will be rooted with the latest CWM recovery installed.
if u flash back the original kernel (zimage) again thro ODIN u will not loose ur root but it will be limited in its functionality
Click to expand...
Click to collapse
Thank you very much, by "limited functionality" I assume you mean that there will be no cwm recovery, still that's good enough for me Thanks again

Categories

Resources