I have an unlocked vibrant on ATT and the MMS message I send doesn't get received. Any ideas?
you might not have the correct apn settings for att. google att android apn setttings.
googled..and i found some apn settings and i entered them on my phone however my phone couldnt find the data network at all so i reverted to defaults. and yes i rebooted twice. i did see something regarding changing the port # to 8080? should i give it a spin?
Hi ,
I have Bell Atrix, unlocked, I flashed the Franch SBF 2.1.1, and all worked well, EXCEPT..
the phone is always roaming, I cannot get data unless I check the Data roaming, there is a little (r) next to my signal all the time..
and I don't know how to fix it..I checked Build.prop, to see if there any setting there.. but I dont know which and what to look for..
my question is: is there a way or a settings that I can change to get rid of the raoaming issue.
as I said my Atrix is BELL and I am with fido..
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Bell Atrix Roaming after FR 2.1.1
NFHimself said:
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Click to expand...
Click to collapse
I did put the APN for Fido, unless I turn on the roaming data, it does not connect.. also now one seems to explain the (R) next to the signal.. why the Bell Atrix started to show me that its roaming after flashing with FR 2.1.1 sbf.. in on Montreal with FIDO and fido sim in my Atrix..
that is my real question.
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
NFHimself said:
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
Click to expand...
Click to collapse
I'll take a look in my apns.conf but it must have the Canada codes as I have been running the french sbf since it was leaked on my Bell version (on Bell) and never had it roam. I just had to add the Bell apn (obviously) and it worked fine.
I do have a question for you though, since you seem to know a lot about these phones, etc. On my last phone (Samsung Galaxy S), there was a secret menu code (like *#*#4636#*#*) that would take you to the network band settings. From there you could not only see what band the phone was running on, but you could SET what bands were active. Is there anything like that on the Atrix? I am curious if the modem in these non Bell sbf's like Telstra/french sbf access the 850MHz band or not.
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
NFHimself said:
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
Click to expand...
Click to collapse
Thanks for looking. I wasn't sure if you could even manually set anything other then selecting "USA Bands" in 4636. It's no big deal, i'm just used to being able to go in and manually select bands on my previous SGS.
My signal is fine, it was just for curiosities sake.
HI NF
I check my APN. here are the values
Name: FIDO
APN: Internet.fido.ca
USERNAME:Fido
PWD:FIDO
*****
MCC:302
MNC: 370
Those are the only values I have..
this is really strange.. according to the above, I should not be roaming.. but something changed in my phone when I first flashed the French SBF.. and is shows roaming after that flash..
this is really strange..
UPDATE: another problem : when I choose Setting->call Setting->Operator Selector, I notived two things.
the Check box next to Select Automatically is not there, I think it was there when I was on Bell Stock,
next when I choose .. Search Networks.. it searched for long time and phone stops responding, I have to Turn off .
also, when I choose Advanced Setting the Call waiting is greyed out, when I click on Caller ID I get Invalid SIM Error.. again I have to reboot to get the phone working again..
the info I have after *#*# 4636 ...
Nieigbouring CID shows as UNKNOWN..
Roaming: Roaming
NETWORK TYPE:UMTS
not sure if this will you a clue..
Hi,
Sounds like it might be an issue with the radio itself, or it could be that you are just roaming, perhaps a network outage. I would try flashing the telstra sbf, see if you get the same problem. If we had a Bell sbf would could revert back to the stock radio, so we have two options, 1.87 or 1.92. You could try just flashing the radio to see.
In my settings, I have it set to GSM (auto), nothing special there. In network settings, I have it set to automatic, under operator selection, auto is selected. I don't have roaming issues myself with either firmware, but I am not using my phone in your area. Could just be a network update in my area from being in the same boat.
Cheers!
NFHimself..
I followed your instructions about Restore the partitions.. and it works.. I dont have roaming anymore and data work.. you are the man!!! thanks so much for your help
it Worked!!!
I followed your instructions to RESTORE the phone and man.. I was so happy to see it work.. thanks so much for your help..
You're welcome, two times.
Cheers!
I have a problem with roaming.
I am on MTS who has joined with Rogers network.
On stock ROM: 2-6-35-7-i9100xwkf3-cl276555 rootdell101 #2
I go to the US
Phone works on roaming
Can receive SMS
Cannot send SMS - Send fails
I have since rooted and installed Alienware 2-6-35-11 ninphetamine 2.1.3 xxkh3
I go to the US
Phone has 4/5 bars and can't get on network to roam
can't send/receive SMS
when dialing get the Mobile network unavailable message
My wife's samsung galaxy S i897 works fine -
Swapping SIMs with her yields the same failures on my S2 with her SIM.
In both cases, crossing the border home fixes the problem and life is grand.
I have tried:
1.enabling data roaming
2.rebooting
3.battery pull
4.swapping sims
Is anyone else having similar roaming issues - is there a ROM that actually works while roaming from Canada while in the US?
I have seen problems on my old Galaxy S and my wife's similar to this as when trying different ROMS, but have never gone across the border with any of these ROMS installed.
What I've seen with different ROMS is:
1. sometimes cannot get phone to get on network unless I setup the APN settings first
2. sometimes cannot get phone or data to work without enabling roaming mode. The phone actually says it's roaming even when it's on the home network
Is there anything I'm missing in the forums on this issue?
Thanks for the help
hmm, maybe you've tried, but have you checked if the APN list is accurate ?
i believe there is an app to set the APN on the market ( can't remember the name though, never had the need for it.)
or try to google if you can find the APN setting of your network provider.
Seem like an APN problem to me as you explain it.
on the phone, you can access that with :
Settings >> Mobile networks >> Access Point Names and then the details of each APN can be checked/edited.
i am running miui 5.4. Everything is working as should, with the exception of MMS. After days of research and forum crawling like a crackhead, i have concluded that the apn settings is the problem, if i create a new apn and input the settings for us cellular (my carrier) then i am able to send and recieve MMS. It is only when i reboot my phone that it breaks again, and i am forced to re-enter the settings to send MMS. I am just curious if anyone has had a similar problem, and if there is a way to fix it so i dont have to enter these settings with every reboot
thanks in advance
try to flash nv white rabbit, all settings needed for qpst.
you can also change other settings under ##data#, ##DEBUG#.
mms spc was 500667 on my device. not the standard 000000
so I am having APN issues after upgrading from 2.6.3 to 4.1.2 rooted. no data or mms, phone and txt works great. same provider.
galaxy s2 sch-r760 generic cdma, ACS provider here in alaska. apparently goes through gci?
now this is going to be a book, so grab a tasty beverage.
when i add the APN the mnc and mmc are not correct.
when i change them it discards the APN
i have no sim.
this thread did not help
http://forum.xda-developers.com/showthread.php?t=715788
if i dont change those, it seems to communicate with my network as it fills in the mmsc field. but i get no internet.
if i enable then disable airplane mode it shows the 3g emblem, then it disappears.
I have all the correct APN info from my provider.
I have tried every way of changing the APN-conf.xml file but nothng has worked.
my thinking is that i need to change the default mnc and mmc that appear when i go to add the apn, to the correct values and then i will be able to save it.
however i cannot find that field in the systems. if someone know a trick i havent found in the last week of researching, please help.
could my phone be locked? if so how would i go about unlocking? could upgrading my software have changed my cdma settings??
i am fairly new to messing with android but i have some linux experience and am a quick learner.
Also if there is a custom rom or kernal or binary or what ever the operating system is called that might fix this issue and work on my device please let me know.
if someone does help i will pay a reward to them via pay pal, it wont be much but hey its better than nothing.